RESUMEN
Reagent instability reduces the efficiency of chemical processes, and while much effort is devoted to reaction optimization, less attention is paid to the mechanistic causes of reagent decomposition. Indeed, the response is often to simply use an excess of the reagent. Two reaction classes with ubiquitous examples of this are the Suzuki-Miyaura cross-coupling of boronic acids/esters and the transfer of CF3 or CF2 from the Ruppert-Prakash reagent, TMSCF3. This Account describes some of the overarching features of our mechanistic investigations into their decomposition. In the first section we summarize how specific examples of (hetero)arylboronic acids can decompose via aqueous protodeboronation processes: Ar-B(OH)2 + H2O â ArH + B(OH)3. Key to the analysis was the development of a kinetic model in which pH controls boron speciation and heterocycle protonation states. This method revealed six different protodeboronation pathways, including self-catalysis when the pH is close to the pKa of the boronic acid, and protodeboronation via a transient aryl anionoid pathway for highly electron-deficient arenes. The degree of "protection" of boronic acids by diol-esterification is shown to be very dependent on the diol identity, with six-membered ring esters resulting in faster protodeboronation than the parent boronic acid. In the second section of the Account we describe 19F NMR spectroscopic analysis of the kinetics of the reaction of TMSCF3 with ketones, fluoroarenes, and alkenes. Processes initiated by substoichiometric "TBAT" ([Ph3SiF2][Bu4N]) involve anionic chain reactions in which low concentrations of [CF3]- are rapidly and reversibly liberated from a siliconate reservoir, [TMS(CF3)2][Bu4N]. Increased TMSCF3 concentrations reduce the [CF3]- concentration and thus inhibit the rates of CF3 transfer. Computation and kinetics reveal that the TMSCF3 intermolecularly abstracts fluoride from [CF3]- to generate the CF2, in what would otherwise be an endergonic α-fluoride elimination. Starting from [CF3]- and CF2, a cascade involving perfluoroalkene homologation results in the generation of a hindered perfluorocarbanion, [C11F23]-, and inhibition. The generation of CF2 from TMSCF3 is much more efficiently mediated by NaI, and in contrast to TBAT, the process undergoes autoacceleration. The process involves NaI-mediated α-fluoride elimination from [CF3][Na] to generate CF2 and a [NaI·NaF] chain carrier. Chain-branching, by [(CF2)3I][Na] generated in situ (CF2 + TFE + NaI), causes autoacceleration. Alkenes that efficiently capture CF2 attenuate the chain-branching, suppress autoacceleration, and lead to less rapid difluorocyclopropanation. The Account also highlights how a collaborative approach to experiment and computation enables mechanistic insight for control of processes.
Asunto(s)
Ésteres , Fluoruros , Alquenos/química , Ácidos Borónicos/química , Ésteres/química , Indicadores y Reactivos , CinéticaRESUMEN
The kinetics of quinuclidine displacement of BH3 from a wide range of Lewis base borane adducts have been measured. Parameterization of these rates has enabled the development of a nucleofugality scale (NFB), shown to quantify and predict the leaving group ability of a range of other Lewis bases. Additivity observed across a number of series R'3-nRnX (X = P, N; R' = aryl, alkyl) has allowed the formulation of related substituent parameters (nfPB, nfAB), providing a means of calculating NFB values for a range of Lewis bases that extends far beyond those experimentally derived. The utility of the nucleofugality parameter is explored by the correlation of the substituent parameter nfPB with the hydrolyses rates of a series of alkyl and aryl MIDA boronates under neutral conditions. This has allowed the identification of MIDA boronates with heteroatoms proximal to the reacting center, showing unusual kinetic lability or stability to hydrolysis.
Asunto(s)
Boranos , Bases de Lewis , Hidrólisis , CinéticaRESUMEN
Alkene dicarbofunctionalizations enable the streamlined construction of aliphatic structures and have thus been the subject of intense research efforts. Despite significant progress, catalytic asymmetric variants remain scarce. Inspired by the advantages of reductive cross-coupling approaches, we present here a highly efficient asymmetric intermolecular Ni-catalyzed reductive dicarbofunctionalization of alkenes. Two distinct readily available electrophiles, namely, Csp2- and Csp3-halides, are added simultaneously across a variety of olefins (vinyl amides, vinyl boranes, vinyl phosphonates) at room temperature in a highly regio- and enantioselective manner. The reaction, devoid of sensitive organometallic reagents, takes advantage of an in situ generated chiral alkyl Ni(III)-intermediate to ensure a stereodefined outcome in the Csp3-Csp2 bond-forming reaction. An (l)-(+)-isoleucine chiral bisoxazoline ligand and the presence of coordinating sites on the alkene are key for the successful outcome in these "asymmetric radical relayed reductive couplings" (ARRRCs). Further, multiple transformations of the chiral amides obtained in this process showcase the potential of this new methodology for the straightforward assembly of chiral building blocks such as primary and secondary amines and oxazolines, highlighting its synthetic utility.
RESUMEN
The mechanism of CF2 transfer from TMSCF3 (1), mediated by TBAT (2-12 mol %) or by NaI (5-20 mol %), has been investigated by in situ/stopped-flow 19F NMR spectroscopic analysis of the kinetics of alkene difluorocyclopropanation and competing TFE/c-C3F6/homologous perfluoroanion generation, 13C/2H KIEs, LFERs, CF2 transfer efficiency and selectivity, the effect of inhibitors, and density functional theory (DFT) calculations. The reactions evolve with profoundly different kinetics, undergoing autoinhibition (TBAT) or quasi-stochastic autoacceleration (NaI) and cogenerating perfluoroalkene side products. An overarching mechanism involving direct and indirect fluoride transfer from a CF3 anionoid to TMSCF3 (1) has been elucidated. It allows rationalization of why the NaI-mediated process is more effective for less-reactive alkenes and alkynes, why a large excess of TMSCF3 (1) is required in all cases, and why slow-addition protocols can be of benefit. Issues relating to exothermicity, toxicity, and scale-up are also noted.
RESUMEN
Olefins devoid of directing or activating groups have been dicarbofunctionalized here with two electrophilic carbon sources under reductive conditions. Simultaneous formation of one C(sp3)-C(sp3) and one C(sp3)-C(sp2) bond across a variety of unbiased π-systems proceeds with exquisite selectivity by the combination of a Ni catalyst with TDAE as sacrificial reductant. Control experiments and computational studies revealed the feasibility of a radical-based mechanism involving, formally, two interconnected Ni(I)/Ni(III) processes and demonstrated the different ability of Ni(I) species (Ni(I)I vs PhNi(I)) to reduce the C(sp3)-I bond. The role of the reductant was also investigated in depth, suggesting that a one-electron reduction of Ni(II) species to Ni(I) is thermodynamically favored. Further, the preferential activation of alkyl vs aryl halides by ArNi(I) complexes as well as the high affinity of ArNi(II) for secondary over tertiary C-centered radicals explains the lack of undesired homo- and direct coupling products (Ar-Ar, Ar-Alk) in these transformations.
RESUMEN
The kinetics of the nominally irreversible reaction of the third generation Grubbs catalyst G-III-Br (4.6 µM) with ethyl vinyl ether (EVE) in toluene at 5 °C have been re-visited. There is a rapid equilibrium between the bispyridyl form of G-III-Br, 1, and its monopyridyl form, 2 (K ≈ 0.001 M). The empirical rate constants (kobs.) for the reaction with EVE, determined UV-vis spectrophotometrically under optimised anaerobic stopped-flow conditions, are found by testing the quality of fit of a series of steady-state approximations. The kinetics do not correlate with solely dissociative or associative pathways, but do correlate with a mechanism where these pathways converge at an alkene complex primed to undergo metathesis. In the presence of traces of air there is a marked increased in the rate of decay of G-III-Br due to competing oxidation to yield benzaldehyde; a process that appears to be very efficiently catalysed by trace metal contaminants. The apparent acceleration of the initiation process may account for the rates determined herein being over an order of magnitude lower than previously estimated.
RESUMEN
The potential of merging photoredox and nickel catalysis to perform multicomponent alkene difunctionalizations under visible-light irradiation is demonstrated here. Secondary and tertiary alkyl groups, as well as sulfonyl moieties can be added to the terminal position of the double bond with simultaneous arylation of the internal carbon atom in a single step under mild reaction conditions. The process, devoid of stoichiometric additives, benefits from the use of bench-stable and easy-to-handle reagents, is operationally simple, and tolerates a wide variety of functional groups.
RESUMEN
Herein we present the first example of a three-component dicarbofunctionalization of olefins under reductive conditions. Our strategy takes advantage of nickel catalysis to add aryl and alkyl groups across the double bond with remarkable selectivity. The reaction shows broad functional group compatibility and more importantly, it proves to be general in terms of the alkenes that can be functionalized compared to previous dicarbofunctionalization methods. Initial control experiments reveal different activation modes for both electrophiles and the involvement of alkyl radicals throughout the reaction.
RESUMEN
An intermolecular, three-component reductive dicarbofunctionalization of alkenes is presented here. The combination of Ni catalysis with TDAE as final reductant enables the direct formation of Csp3-Csp3 and Csp3-Csp2 bonds across a variety of π-systems using two different electrophiles that are sequentially activated with exquisite selectivity under mild reaction conditions.
RESUMEN
ß,ß-Disubstituted vinyl sulfones were obtained with complete regio- and stereocontrol in a multicomponent reaction involving alkynes, organoboronic acids, and sulfonyl chlorides in the presence of a nickel catalyst. The reaction proceeds via sulfonyl radicals generated inâ situ under mild reaction conditions.
RESUMEN
A nickel-catalyzed three-component reaction involving terminal alkynes, boronic acids, and alkyl halides is presented herein. Trisubstituted alkenes can be obtained in a highly regio- and stereocontrolled manner by the simultaneous addition of both aryl and alkyl groups across the triple bond in a radical-mediated process. The reaction, devoid of air- and moisture-sensitive organometallic reagents and catalysts, is operationally simple and offers a broad scope and functional-group tolerance.
RESUMEN
A Pd-catalyzed three component reaction involving terminal alkynes, boronic acids, and perfluoroalkyl iodides is presented here. Trisubstituted perfluoroalkenes can be obtained in a highly regio- and stereocontrolled manner by the simultaneous addition of both aryl and CnFm groups across the triple bond in a radical-mediated process. The reaction is operationally simple offering a broad scope and functional group tolerance.
Asunto(s)
Alquinos/química , Fluorocarburos/química , Paladio/química , Alquilación , Catálisis , EstereoisomerismoRESUMEN
Two highly stereoselective radical-mediated syntheses of densely functionalized indanes and dibenzocycloheptadienes from ortho-vinyl- and ortho-vinylaryl-substituted N-(arylsulfonyl)-acrylamides, respectively, are presented here. The chemoselective addition of inâ situ generated radicals (X(·)) onto the styrene moieties triggers an unprecedented reaction cascade, resulting in the formation of one new C-X bond and two new C-C bonds, a formal 1,4-aryl migration, and the extrusion of SO2 to generate an amidyl radical intermediate. This intermediate, upon Hâ abstraction, leads to the observed 5- and 7-membered ring carbocyclic products, respectively, in a highly efficient manner.
RESUMEN
The kinetics of sulfur transfer from titanocene (poly)sulfides (RCp2TiS5, Cp2TiS4CMe2, Cp2Ti(SAr)2, Cp2TiCl(SAr)) to sulfenyl chlorides (S2Cl2, RSCl) have been investigated by a combination of stopped-flow UV-Vis/NMR reaction monitoring, titration assays, numerical kinetic modelling and KS-DFT calculations. The reactions are rapid, proceeding to completion over timescales of milliseconds to minutes, via a sequence of two S-S bond-forming steps (k 1, k 2). The archetypical polysulfides Cp2TiS5 (1a) and Cp2TiS4C(Me2) (2a) react with disulfur dichloride (S2Cl2) through rate-limiting intermolecular S-S bond formation (k 1) followed by a rapid intramolecular cyclization (k 2, with k 2 â« k 1 [RSCl]). The monofunctional sulfenyl chlorides (RSCl) studied herein react in two intermolecular S-S bond forming steps proceeding at similar rates (k 1 ≈ k 2). Reactions of titanocene bisthiophenolates, Cp2Ti(SAr)2 (5), with both mono- and di-functional sulfenyl chlorides result in rapid accumulation of the monothiophenolate, Cp2TiCl(SAr) (6) (k 1 > k 2). Across the range of reactants studied, the rates are relatively insensitive to changes in temperature and in the electronics of the sulfenyl chloride, moderately sensitive to the electronics of the titanocene (poly)sulfide (ρ (Ti-(SAr)) ≈ -2.0), and highly sensitive to the solvent polarity, with non-polar solvents (CS2, CCl4) leading to the slowest rates. The combined sensitivities are the result of a concerted, polarized and late transition state for the rate-limiting S-S bond forming step, accompanied by a large entropic penalty. Each substitution step {[Ti]-SR' + Cl-SR â [Ti]-Cl + RS-SR'} proceeds via titanium-assisted Cl-S cleavage to generate a transient pentacoordinate complex, Cl-[Cp2TiX]-S(R')-SR, which then undergoes rapid Ti-S dissociation.
RESUMEN
A 'principles and practice' tutorial-style review of the application of solution-phase NMR in the analysis of the mechanisms of homogeneous organic and organometallic reactions and processes. This review of 345 references summarises why solution-phase NMR spectroscopy is uniquely effective in such studies, allowing non-destructive, quantitative analysis of a wide range of nuclei common to organic and organometallic reactions, providing exquisite structural detail, and using instrumentation that is routinely available in most chemistry research facilities. The review is in two parts. The first comprises an introduction to general techniques and equipment, and guidelines for their selection and application. Topics include practical aspects of the reaction itself, reaction monitoring techniques, NMR data acquisition and processing, analysis of temporal concentration data, NMR titrations, DOSY, and the use of isotopes. The second part comprises a series of 15 Case Studies, each selected to illustrate specific techniques and approaches discussed in the first part, including in situ NMR (1/2H, 10/11B, 13C, 15N, 19F, 29Si, 31P), kinetic and equilibrium isotope effects, isotope entrainment, isotope shifts, isotopes at natural abundance, scalar coupling, kinetic analysis (VTNA, RPKA, simulation, steady-state), stopped-flow NMR, flow NMR, rapid injection NMR, pure shift NMR, dynamic nuclear polarisation, 1H/19F DOSY NMR, and in situ illumination NMR.