Selection of metric for indoor-outdoor source apportionment of metals in PM2.5 : mg/kg versus ng/m3.

Trends in the elemental composition of fine particulate matter (PM2.5 ) collected from indoor, outdoor, and personal microenvironments were investigated using two metrics: ng/m3 and mg/kg. Pearson correlations that were positive using one metric commonly disappeared or flipped to become negative when the other metric was applied to the same dataset. For example, the correlation between Mo and S in the outdoor microenvironment was positive using ng/m3 (p < 0.05) but negative using mg/kg (p < 0.05). In general, elemental concentrations (mg/kg) within PM2.5 decreased significantly (p < 0.05) as PM2.5 concentrations (µg/m3 ) increased-a dilution effect that was observed in all microenvironments and seasons. An exception was S: in the outdoor microenvironment, the correlation between wt% S and PM2.5  flipped from negative in the winter (p < 0.01) to positive (p < 0.01) in the summer, whereas in the indoor microenvironment, this correlation was negative year-round (p < 0.05). Correlation analyses using mg/kg indicated that elemental associations may arise from Fe-Mn oxyhydroxide sorption processes that occur as particles age, with or without the presence of a common anthropogenic source. Application of mass-normalized concentration metrics (mg/kg or wt%), enabled by careful gravimetric analysis, revealed new evidence of the importance of indoor sources of elements in PM2.5 .

Rare earth elements and select actinoids in the Canadian House Dust Study.

Nationally representative baseline data are presented for rare earth elements (REE), thorium (Th) and uranium (U) in house dust sampled from 1025 urban homes, in units of concentrations (µg g-1 ), loadings (µg m-2 ), and loading rates (ng m-2  d-1 ). Spearman rank correlations indicate that, in addition to outdoor sources, consumer products and building materials can influence indoor dust concentrations of REE, Th, and U. Correlations (P<.01) with numbers of occupants, dogs, and cats suggest soil track-in. Correlations (P<.01) with hardwood floors suggest release of REE additives used in pigments and coatings during daily wear and tear. Concentrations of light REE are elevated in smokers' homes compared to non-smokers' homes (P<.001), suggesting that a key source is "mischmetal," the REE alloy used in cigarette-lighter flints. Indoor sources include geological impurities in raw materials used in consumer products, such as U and Th impurities in bentonite clay used in cat litter, and REE impurities in phosphates used for a variety of applications including dog food and building materials. Median gastric bioaccessibility (pH 1.5) of most REE in dust ranges from about 20% to 29%. Household vacuum samples correlate with fresh dust samples from the same homes (P<.001 for all investigated elements).

Detection of Carbon Nanotubes in Indoor Workplaces Using Elemental Impurities.

This study investigated three area sampling approaches for using metal impurities in carbon nanotubes (CNTs) to identify CNT releases in workplace environments: air concentrations (µg/m3), surface loadings (µg/cm2), and passive deposition rates (µg/m2/h). Correlations between metal impurities and CNTs were evaluated by collecting simultaneous colocated area samples for thermal-optical analysis (for CNTs) and ICP-MS analysis (for metals) in a CNT manufacturing facility. CNTs correlated strongly with Co (residual catalyst) and Ni (impurity) in floor surface loadings, and with Co in passive deposition samples. Interpretation of elemental ratios (Co/Fe) assisted in distinguishing among CNT and non-CNT sources of contamination. Stable isotopes of Pb impurities were useful for identifying aerosolized CNTs in the workplace environment of a downstream user, as CNTs from different manufacturers each had distinctive Pb isotope signatures. Pb isotopes were not useful for identifying CNT releases within a CNT manufacturing environment, however, because the CNT signature reflected the indoor background signature. CNT manufacturing companies and downstream users of CNTs will benefit from the availability of alternative and complementary strategies for identifying the presence/absence of CNTs in the workplace and for monitoring the effectiveness of control measures.

Evaluating the capabilities of aerosol-to-liquid particle extraction system (ALPXS)/ICP-MS for monitoring trace metals in indoor air.

This study investigates the application of the Aerosol-to-Liquid Particle Extraction System (ALPXS), which uses wet electrostatic precipitation to collect airborne particles, for multi-element indoor stationary monitoring. Optimum conditions are determined for capturing airborne particles for metal determination by inductively coupled plasma-mass spectrometry (ICP-MS), for measuring field blanks, and for calculating limits of detection (LOD) and quantification (LOQ). Due to the relatively high flow rate (300 L min(-1)), a sampling duration of 1 hr to 2 hr was adequate to capture airborne particle-bound metals under the investigated experimental conditions. The performance of the ALPXS during a building renovation demonstrated signal-to-noise ratios appropriate for sampling airborne particles in environments with elevated metal concentrations, such as workplace settings. The ALPXS shows promise as a research tool for providing useful information on short-term variations (transient signals) and for trapping particles into aqueous solutions where needed for subsequent characterization. As the ALPXS does not provide size-specific samples, and its efficiency at different flow rates has yet to be quantified, the ALPXS would not replace standard filter-based protocols accepted for regulatory applications (e.g., exposure measurements), but rather would provide additional information if used in conjunction with filter based methods. Implications: This study investigates the capability of the Aerosol-to-Liquid Particle Extraction System (ALPXS) for stationary sampling of airborne metals in indoor workplace environments, with subsequent analysis by ICP-MS. The high flow rate (300 L/min) permits a short sampling duration (< 2 hr). Results indicated that the ALPXS was capable of monitoring short-term changes in metal emissions during a renovation activity. This portable instrument may prove to be advantageous in occupational settings as a qualitative indicator of elevated concentrations of airborne metals at short time scales.

Real-time FPGA data collection of pulsed-laser cavity ringdown signals.

This paper presents results from a pulsed-laser cavity ring-down spectrometer with novel field programable gate array real-time data collection. We show both theoretically and experimentally that the data extraction can be achieved from a single cavity ringdown event, and that the absorbance can be determined without the need to fit the ringdown time explicitly. This methodology could potentially provide data acquisition rate up to 1 MHz, with the accuracy and precision comparable to nonlinear least squares fitting algorithms.

Relationships between House Characteristics and Exposures to Metal(loid)s and Synthetic Organic Contaminants Evaluated Using Settled Indoor Dust.

This study investigates associations between house characteristics and chemical contaminants in house dust, collected under the nationally representative Canadian House Dust Study (2007−2010). Vacuum samples (<80 µm fraction) were analysed for over 200 synthetic organic compounds and metal(loid)s. Spearman rank correlations between contaminant concentrations in dust and presence of children and pets, types of flooring, heating styles and other characteristics suggested a number of indoor sources, pointing to future research directions. Numerous synthetic organics were significantly associated with reported use of room deodorizers and with the presence of cats in the home. Hardwood flooring, which is a manufactured wood product, emerged as a source of metal(loid)s, phthalates, organophosphate flame retardants/plasticizers, and obsolete organochlorine pesticides such as ∑DDT (but not halogenated flame retardants). Many metal(loid)s were significantly correlated with flame-retardant compounds used in building materials and heating systems. Components of heating appliances and heat distribution systems appeared to contribute heat-resistant chemicals and alloys to settled dust. Carpets displayed a dual role as both a source and repository of dust-borne contaminants. Contaminant loadings (<80 µm fraction) were significantly elevated in heavily carpeted homes, particularly those located near industry. Depending on the chemical (and its source), the results show that increased dust mass loading may enrich or dilute chemical concentrations in dust. Research is needed to improve the characterisation of hidden indoor sources such as flame retardants used in building materials and heating systems, or undisclosed ingredients used in common household products, such as air fresheners and products used for companion animals.

Canadian house dust study: lead bioaccessibility and speciation.

Vacuum samples were collected from 1025 randomly selected urban Canadian homes to investigate bioaccessible Pb (Pb(S)) concentrations in settled house dust. Results indicate a polymodal frequency distribution, consisting of three lognormally distributed subpopulations defined as "urban background" (geomean 58 µg g(-1)), "elevated" (geomean 447 µg g(-1)), and "anomalous" (geomean 1730 µg g(-1)). Dust Pb(S) concentrations in 924 homes (90%) fall into the "urban background" category. The elevated and anomalous subpopulations predominantly consist of older homes located in central core areas of cities. The influence of house age is evidenced by a moderate correlation between house age and dust Pb(S) content (R(2) = 0.34; n = 1025; p < 0.01), but it is notable that more than 10% of homes in the elevated/anomalous category were built after 1980. Conversely, the benefit of home remediation is evidenced by the large number of homes (33%) in the background category that were built before 1960. The dominant dust Pb species determined using X-ray Absorption Spectroscopy were as follows: Pb carbonate, Pb hydroxyl carbonate, Pb sulfate, Pb chromate, Pb oxide, Pb citrate, Pb metal, Pb adsorbed to Fe- and Al-oxyhydroxides, and Pb adsorbed to humate. Pb bioaccessibility estimated from solid phase speciation predicts Pb bioaccessibility measured using a simulated gastric extraction (R(2) = 0.85; n = 12; p < 0.0001). The trend toward increased Pb bioaccessibility in the elevated and anomalous subpopulations (75% ± 18% and 81% ± 8%, respectively) compared to background (63% ± 18%) is explained by the higher proportion of bioaccessible compounds used as pigments in older paints (Pb carbonate and Pb hydroxyl carbonate). This population-based study provides a nationally representative urban baseline for applications in human health risk assessment and risk management.

Buoyancy-corrected gravimetric analysis of lightly loaded filters.

Numerous sources of uncertainty are associated with the gravimetric analysis of lightly loaded air filter samples (< 100 microg). The purpose of the study presented here is to investigate the effectiveness and limitations of air buoyancy corrections over experimentally adjusted conditions of temperature (21-25 degrees C) and relative humidity (RH) (16-60% RH). Conditioning (24 hr) and weighing were performed inside the Archimedes M3 environmentally controlled chamber. The measurements were performed using 20 size-fractionated samples of resuspended house dust loaded onto Teflo (PTFE) filters using a Micro-Orifice Uniform Deposit Impactor representing a wide range of mass loading (7.2-3130 microg) and cut sizes (0.056-9.9 microm). By maintaining tight controls on humidity (within 0.5% RH of control setting) throughout pre- and postweighing at each stepwise increase in RH, it was possible to quantify error due to water absorption: 45% of the total mass change due to water absorption occurred between 16 and 50% RH, and 55% occurred between 50 and 60% RH. The buoyancy corrections ranged from -3.5 to +5.8 microg in magnitude and improved relative standard deviation (RSD) from 21.3% (uncorrected) to 5.6% (corrected) for a 7.2 microg sample. It is recommended that protocols for weighing low-mass particle samples (e.g., nanoparticle samples) should include buoyancy corrections and tight temperature/humidity controls. In some cases, conditioning times longer than 24 hr may be warranted.

Efficacy of everolimus (RAD001) in patients with advanced NSCLC previously treated with chemotherapy alone or with chemotherapy and EGFR inhibitors.

BACKGROUND: Treatment options are scarce in pretreated advanced non-small-cell lung cancer (NSCLC) patients. RAD001, an oral inhibitor of the mammalian target of rapamycin (mTOR), has shown phase I efficacy in NSCLC. METHODS: Stage IIIb or IV NSCLC patients, with two or fewer prior chemotherapy regimens, one platinum based (stratum 1) or both chemotherapy and epidermal growth factor receptor tyrosine kinase inhibitors (stratum 2), received RAD001 10 mg/day until progression or unacceptable toxicity. Primary objective was overall response rate (ORR). Analyses of markers associated with the mTOR pathway were carried out on archival tumor from a subgroup using immunohistochemistry (IHC) and direct mutation sequencing. RESULTS: Eighty-five patients were enrolled, 42 in stratum 1 and 43 in stratum. ORR was 4.7% (7.1% stratum 1; 2.3% stratum 2). Overall disease control rate was 47.1%. Median progression-free survivals (PFSs) were 2.6 (stratum 1) and 2.7 months (stratum 2). Common > or =grade 3 events were fatigue, dyspnea, stomatitis, anemia, and thrombocytopenia. Pneumonitis, probably or possibly related, mainly grade 1/2, occurred in 25%. Cox regression analysis of IHC scores found that only phospho AKT (pAKT) was a significant independent predictor of worse PFS. CONCLUSIONS: RAD001 10 mg/day was well tolerated, showing modest clinical activity in pretreated NSCLC. Evaluation of RAD001 plus standard therapy for metastatic NSCLC continues.

Integrin alpha1beta1 mediates a unique collagen-dependent proliferation pathway in vivo.

Activation of integrins upon binding to extracellular matrix proteins is believed to be a crucial step for the regulation of cell survival and proliferation. We have used integrin alpha1-null mice to investigate the role of this collagen receptor in the regulation of cell growth and survival in vivo. alpha1-deficient animals, which are viable and fertile, have a hypocellular dermis and a deficiency in dermal fibroblast proliferation as embryos. In vitro analysis of alpha1-null embryonic fibroblasts has revealed that their proliferation rate is markedly reduced when plated on collagenous substrata, despite normal attachment and spreading. Moreover, on the same collagenous matrices, alpha1-null fibroblasts fail to recruit and activate the adaptor protein Shc. The failure to activate Shc is accompanied by a downstream deficiency in recruitment of Grb2 and subsequent mitogen-activated protein kinase activation. Taken together with the growth deficiency observed on collagens, this finding indicates that the alpha1beta1 is the sole collagen receptor which can activate the Shc mediated growth pathway. Thus, integrin alpha1 has a unique role among the collagen receptors in regulating both in vivo and in vitro cell proliferation in collagenous matrices.

Similarity of the C. elegans developmental timing protein LIN-42 to circadian rhythm proteins.

The Caenorhabditis elegans heterochronic genes control the relative timing and sequence of many events during postembryonic development, including the terminal differentiation of the lateral hypodermis, which occurs during the final (fourth) molt. Inactivation of the heterochronic gene lin-42 causes hypodermal terminal differentiation to occur precociously, during the third molt. LIN-42 most closely resembles the Period family of proteins from Drosophila and other organisms, proteins that function in another type of biological timing mechanism: the timing of circadian rhythms. Per mRNA levels oscillate with an approximately 24-hour periodicity. lin-42 mRNA levels also oscillate, but with a faster rhythm; the oscillation occurs relative to the approximately 6-hour molting cycles of postembryonic development.

Sonographic monitoring of mass effect in stroke patients treated with hypothermia. Correlation with intracranial pressure and matrix metalloproteinase 2 and 9 expression.

Severe stroke leads to subsequent cerebral oedema. Patients with severe stroke develop midline shift (MLS) which can be measured by transcranial duplex sonography (TCD). We measured MLS with TCD in 30 patients with large infarction in the territory of the middle cerebral artery (MCA). All of the examined patients had intracranial pressure (ICP) measure devices and the ICP at the time of the TCD was recorded. MLS was also determined on CT scan on day 4. Ten of the 30 patients were treated with hypothermia. We also determined matrix metalloproteinase 2 (MMP2) and matrix metalloproteinase 9 (MMP9) in serum by zymography. MLS measured by TCD correlated significantly with MLS on CT. In addition there was a strong correlation between the ICP measured at the time of TCD and MLS. In patients treated with hypothermia MLS was less pronounced. MMP9 and MMP2 showed a characteristic time course and had strong associations with MLS. We confirm earlier reports that TCD is a reliable noninvasive method for serially monitoring patients with intracranial lesions. Hypothermia reduces MMP9 activity as well as MLS. TCD may reduce the need for repetitive CT scans in neurological critically ill patients.

A gene-based risk score for lung cancer susceptibility in smokers and ex-smokers.

BACKGROUND: Epidemiological and family studies suggest that lung cancer results from the combined effects of age, smoking and genetic factors. Chronic obstructive pulmonary disease (COPD) is also an independent risk factor for lung cancer and coexists in 40-60% of lung cancer cases. METHODS: In a two-stage case-control association study, genetic markers associated with either susceptibility or protection against lung cancer were identified. In a test cohort of 439 Caucasian smokers or ex-smokers, consisting of healthy smokers and lung cancer cases, 157 candidate single nucleotide polymorphisms (SNPs) were screened. From this, 30 SNPs were identified, the genotypes (codominant or recessive model) of which were associated with either the healthy smokers (protective) or lung cancer (susceptibility) phenotype. After genotyping of this 30-SNP panel in a second validation cohort of 491 subjects and using the same protective and susceptibility genotypes from our test cohort, a 20-SNP panel was selected on the basis of independent univariate analyses. RESULTS: Using multivariate logistic regression, including the 20 SNPs, it was also found that age, history of COPD, family history of lung cancer and gender were significantly and independently associated with lung cancer. CONCLUSIONS: When numeric scores were assigned to both the SNP and demographic data, and sequentially combined by a simple algorithm in a risk model, the composite score was found to be linearly related to lung cancer risk with a bimodal distribution. Genetic data may therefore be combined with other risk variables from smokers or ex-smokers to identify individuals who are most susceptible to developing lung cancer.

The addition of metronomic chemotherapy does not improve outcome for canine splenic haemangiosarcoma.

OBJECTIVES: To determine whether the addition of metronomic chemotherapy improved outcome for dogs with splenic haemangiosarcoma treated with splenectomy and adjuvant maximum tolerated dose chemotherapy. MATERIALS AND METHODS: Medical records were examined retrospectively for dogs with splenic haemangiosarcoma that had undergone splenectomy followed by anthracycline-based chemotherapy. Thirty-nine dogs underwent splenectomy followed by maximum tolerated dose chemotherapy with an anthracycline, cyclophosphamide, or both (Group 1). Twenty-two dogs underwent splenectomy followed by adjuvant maximum tolerated dose chemotherapy with an anthracycline, cyclophosphamide, or both, plus metronomic chemotherapy (Group 2). Dogs in both groups were further separated into those treated with either maximum tolerated dose anthracycline or maximum tolerated dose anthracycline and cyclophosphamide. RESULTS: Median progression-free survival was 165 days and median overall survival time was 180 days in Group 1. Median progression-free survival was 185 days and median overall survival time was 212 days in Group 2. In both groups, the overall survival was shorter in dogs that had received maximum tolerated dose cyclophosphamide. CLINICAL SIGNIFICANCE: The addition of metronomic to maximum tolerated dose chemotherapy protocols does not appear to improve outcome in dogs with splenic haemangiosarcoma treated with splenectomy and maximum tolerated dose chemotherapy.

An in-situ approach for preparing atom probe tomography specimens by xenon plasma-focussed ion beam.

A method for the rapid preparation of atom probe tomography (APT) needles using a xenon plasma-focussed ion beam (FIB) instrument is presented and demonstrated on a test sample of Ti-6Al-4V alloy. The method requires significantly less operator input than the standard lift-out protocol, is site-specific and produces needles with minimal ion-beam damage; electron microscopy indicated the needle's surface amorphised/oxidised region to be less than 2 nm thick. The resulting needles were routinely analysable by APT, confirming the expected microstructure and showing negligible Xe contamination.

A photoluminescence study of film structure in CdTe nanoparticle thin films.

The layer-by-layer deposition of thin films of CdTe nanoparticles and three different polyelectrolytes has been investigated. Photoluminescence spectra were used to monitor the energy transfer properties within the films. As the number of bilayers in a thin film was increased a decrease in the energy of the light emitted was observed. The wavelength change is a two-stage process. Deposition of the first one to two bi-layers of a thin film produced a sharp energy change (626 nm to 637 nm with the addition of a single bi-layer) whereas deposition of subsequent bi-layers produced a more gradual energy change (642 nm-646 nm with the addition of 5 bi-layers). A space-filling mechanism is suggested to account for these changes; smaller nanoparticles penetrate the earlier levels of a thin film and increase the inter-particle energy transfer opportunities within the layers.

Red shift for CdTe nanoparticle thin films and suspensions during heating.

The work that we have conducted shows that temperature affects the wavelength of light emitted from CdTe nanoparticle clusters that are in a suspension or deposited into thin films via a layer-by-layer process. Compared with the stock suspension, the films show an initial photoluminescent shift, of circa 6-8 nm to the red, when the particles are deposited. A shift of circa 6-8 nm is also seen when the suspensions are first heated to 85 degrees C from room temperature (20 degrees C) having been stored in a fridge at 5 degrees C. This shift is non-recoverable. With continual cycling from room temperature to 85 degrees C the suspensions show a slight tendency for the emission to move increasingly to the red; whereas the films show no such tendency. In both cases, the range in emission is ca 10 nm from the room temperature state to 80 degrees C. The intensity of the emission from the film drops abruptly (ca 50% reduction) after one cycle of heating; in the suspension there is an initial increase (ca 3-5% increase) in intensity before it decays. We see that the shift towards the red has been attributed to energy transfer or a rearrangement of the packing of the particles in the thin films. After conducting analysis of the films using scanning probe microscopy we have determined that a change in the morphology is responsible for the permanent shift in emission wavelength associated with prolonged heating. The influence of traps has not been ruled out, but the morphological change in the samples is very large and is likely to be the dominating mechanism affecting change for the red shift at room temperature.

Treatment of murine lupus with cDNA encoding IFN-gammaR/Fc.

IFN-gamma, a pleiotropic cytokine, is a key effector molecule in the pathogenesis of several autoimmune diseases, including lupus. Importantly, deletion of IFN-gamma or IFN-gammaR in several lupus-predisposed mouse strains resulted in significant disease reduction, suggesting the potential for therapeutic intervention. We evaluated whether intramuscular injections of plasmids with cDNA encoding IFN-gammaR/Fc can retard lupus development and progression in MRL-Fas(lpr) mice. Therapy significantly reduced serum levels of IFN-gamma, as well as disease manifestations (autoantibodies, lymphoid hyperplasia, glomerulonephritis, mortality), when treatment was initiated at the predisease stage, particularly when IFN-gammaR/Fc expression was enhanced by electroporation at the injection site. Remarkably, disease was arrested and even ameliorated when this treatment was initiated at an advanced stage. This therapy represents a rare example of disease reversal and makes application of this nonviral gene therapy in humans with lupus (and perhaps other autoimmune/inflammatory conditions) highly promising.

Regulation of inflammation by collagen-binding integrins alpha1beta1 and alpha2beta1 in models of hypersensitivity and arthritis.

Adhesive interactions play an important role in inflammation by promoting leukocyte attachment and extravasation from the vasculature into the peripheral tissues. However, the importance of adhesion molecules within the extracellular matrix-rich environment of peripheral tissues, in which cells must migrate and be activated, has not been well explored. We investigated the role of the major collagen-binding integrins, alpha1beta1 and alpha2beta1, in several in vivo models of inflammation. mAb's against murine alpha1 and alpha2 were found to significantly inhibit effector phase inflammatory responses in animal models of delayed-type hypersensitivity (DTH), contact hypersensitivity (CHS), and arthritis. Mice that were alpha1-deficient also showed decreased inflammatory responses in the CHS and arthritis models when compared with wild-type mice. Decreased leukocyte infiltration and edema formation accompanied inhibition of antigen-specific models of inflammation, as nonspecific inflammation induced by croton oil was not inhibited. This study demonstrates the importance in vivo of alpha1beta1 and alpha2beta1, the collagen-binding integrins, in inflammatory diseases. The study also extends the role of integrins in inflammation beyond leukocyte attachment and extravasation at the vascular endothelial interface, revealing the extracellular matrix environment of peripheral tissues as a new point of intervention for adhesion-based therapies.