RESUMEN
This study evaluates for the first time the distribution and accumulation of butyltin compounds (BTs) in different compartments such as seawater, sediments, suspended particulate matter (SPM), and mussels (Brachidontes rodriguezii) in the Bahía Blanca estuary. The samples were collected from six sampling sites with different anthropogenic impacts. A better visualization and interpretation of data was achieved using chemometric tools (Tucker4 model), which made it possible to reveal the main relationships among the variables. This analysis showed the presence of BTs in all the estuarine environmental compartments, even in sites with low human intervention. The relationships found among BTs levels, seasons, and environmental matrices show the importance of biological processes such as phytoplankton blooms and remobilization of sediments (by tidal dynamics and/or periodic dredging) in BTs distribution and degradation. In addition, partition coefficients showed that mussels mainly bioaccumulate tributyltin from sediment, water and, to a lesser extent, SPM.
Asunto(s)
Estuarios , Contaminantes Químicos del Agua , Argentina , Brasil , Monitoreo del Ambiente , Sedimentos Geológicos , Humanos , Contaminantes Químicos del Agua/análisisRESUMEN
The spatiotemporal distribution of potentially toxic species was studied in the topsoil of parks, playgrounds, and surrounding crop fields of Marcos Juarez City in Córdoba province, Argentina. The content of available metals and of some pesticides used in the region was determined. The mean values of available metal concentrations in all samples, expressed in mg kg-1, were 7.99 ± 6.58, 0.89 ± 0.71, 0.35 ± 0.26, and 1.50 ± 1.40 for Pb, Cr, Cd, and Ni, respectively. Pearson's correlation coefficients, coefficient of variation (%), and principal component analysis were used to explore whether variations in metal content were associated with anthropogenic factors. Agrochemicals such as lindane, chlorobenzilate, endosulfan, endrin, permethrin, and chlorpyrifos were found in crop field soil samples. In turn, chlorothalonil, chlordanes, methoxychlor, DDT, permethrin, and chlorpyrifos were detected in park and playground soil samples. The degree of pollution with possible effects on environmental health was evaluated using the Nemerow integrated pollution index (NIPI) and the modified degree of contamination (mCd). In some campaigns, the values obtained from crop fields ranged from low to high pollution levels during periods of agrochemical application. Noteworthy, in periods of low agrochemical application in crop fields, a high level of pollution was observed in parks and playgrounds. For children, the hazard index (HI) values were higher than the threshold value of 1, suggesting a potential health risk. This study provides valuable information regarding land management practices and highlights the importance of monitoring and implementing policies to reduce human health risks.
Asunto(s)
Metales Pesados , Contaminantes del Suelo , Argentina , Niño , China , Monitoreo del Ambiente , Humanos , Metales Pesados/análisis , Medición de Riesgo , Suelo , Contaminantes del Suelo/análisisRESUMEN
The BCR method was applied on sediments from the salt marsh of San Antonio Bay (SAB). It presents several channels among which the Encerrado is the most important and is impacted by abandoned mining wastes. The pseudototal concentrations of metals measured within this channel were relatively higher than in outer sites, and according to the Igeo index, its contamination level was low. The metal distribution in the different phases of sediment particles showed that the residual component, considered the safest from the environmental point of view, accounted for most of the Fe, Cd, Cu, and Zn contents. Conversely, Pb was mainly in the non-residual component as part of the reducible fraction, thus constituting the main environmental hazard among the studied elements. The predominance of residual and reducible fractions indicated a historic contamination of metal such as Pb, Cu, and Zn from the mining wastes. The low exchangeable and oxidizable fractions would indicate no actual input of metals.
Asunto(s)
Monitoreo del Ambiente , Metales Pesados/análisis , Contaminantes Químicos del Agua/análisis , Humedales , Bahías , Sedimentos Geológicos , Minería , TexasRESUMEN
This work provides a preliminary study of the destination, mobility, and availability of tributyltin (TBT), dibutyltin (DBT), and monobutyltin (MBT) in contaminated sediments and water column within Puerto Rosales Port, located in the middle zone of the Bahía Blanca Estuary (Argentina). Therefore, this study presents the first comprehensive results of the role of several physicochemical parameters (temperature, pH, Eh, salinity, turbidity, organic matter, chlorophyll, and macronutrients) in behavior of organotin compounds (OTCs) in a marine-coastal ecosystem. The samples were collected seasonally in May, August, and November during 2014. Levels of OTCs were determined in sediments and water column samples by means of gas chromatography-mass spectrometry analysis. Degradation index analyses suggested not recent inputs of TBT at the area of study. However, results submitted a continuous input of TBT into the column water; further, its distribution and degradation pattern were shown to be influenced by salinity, turbidity, particulate organic matter, chlorophyll, and nitrates. These last two parameters, chlorophyll and nitrates, also were very important for sediment samples. Chlorophyll together with high temperatures recorded in the surface sediments triggers biodegradation process of TBT and DBT resulting in high MBT levels while nitrates seemed to promote debutylation process. Furthermore, pH appeared to influence drastically the adsorption/desorption activity of TBT and DBT in sediment. Finally, the Eh obtained suggested a degradation of TBT thanks to the presence of Fe (III) in this compartment. In addition, in fact, the results outlined a possible MBT additional input that contributes to the pollution observed in the study area. Graphical abstract Organotin compounds behavior according to several physicochemical parameters.
Asunto(s)
Monitoreo del Ambiente/métodos , Sedimentos Geológicos/química , Compuestos Orgánicos de Estaño/análisis , Compuestos de Trialquiltina/análisis , Contaminantes Químicos del Agua/análisis , Argentina , Biodegradación Ambiental , Brasil , Clorofila/análisis , Estuarios , Cromatografía de Gases y Espectrometría de Masas , Nitratos/análisisRESUMEN
The goal of this study was to improve an already established reference method, such as the one devoted to organotin compounds determination (Reference Method for Marine Pollution Studies, No. 59, UNEP). The proposed upgrade consists of replacing the mechanical shaking by ultrasound energy and applying low temperature throughout the whole procedure. The optimization of the new operational conditions was performed by using a factorial design. Quality control was performed using a certified sediment reference material (PACS-2) for sediments (82.5-97% of recovery) and recoveries on spiked samples for suspended particulate matter (SPM) and mussels (94-100%). The proposed procedure was applied to surface sediment samples, SPM, and native bivalve mollusks (Brachidontes rodriguezii) collected in Bahia Blanca estuary, a very industrialized zone. The relative standard deviation (RSD %) of the environmental samples were less than 7.9%. It is important to note that the proposed procedure reduced the sample pretreatment time about seven times.
Asunto(s)
Sedimentos Geológicos/análisis , Compuestos Orgánicos de Estaño/análisis , Compuestos Orgánicos de Estaño/química , Animales , Bivalvos , Brasil , Estuarios , Sedimentos Geológicos/química , Material Particulado , Control de Calidad , Temperatura , Ultrasonido , Contaminantes Químicos del Agua/análisis , Contaminantes Químicos del Agua/químicaRESUMEN
Levels of tributyltin and its breakdown compounds, including the first record of monobutyltin (MBT) in history for Latin America, were determined in native mussels (Brachidontes rodriguezii) by means of CG-MS, after extraction/derivatization assisted by ultrasound. The samples were collected in 2013 in Bahía Blanca Estuary (Argentina) at 6 sites, which reflect different levels of maritime activities. Total butyltins (TBts = TBT+ DBT+ MBT) levels ranged from 19.64 to 180.57ng Sn g-1 dry weight. According to the Oslo-Paris commission, the results indicated that 73.9% of mussels could be under biological effects risks associated with TBT pollution. In accordance with the calculated bioaccumulation factors, approximately 56% of samples appeared to have accumulated TBT through the sediments. All sampling sites were shown to be impacted by organotin compounds (OTCs) showing variable levels through seasons, which could be related with the variation of the water temperature. Degradation index analyses suggested aged inputs of TBT possibly under a general degradation process at the area of study. In addition, the occurrence of DBT and MBT could not be uniquely attributed to the degradation pathway of the TBT; in fact, results outlined the possible contribution of some punctual and diffuse sources at the area such as proximity to plastic industries, industrial effluents, sewage outlets and domestic wastewaters.
Asunto(s)
Bivalvos/metabolismo , Monitoreo del Ambiente/métodos , Estuarios , Compuestos Orgánicos de Estaño/análisis , Contaminantes Químicos del Agua/análisis , Animales , Argentina , Bivalvos/química , Sedimentos Geológicos/análisis , Compuestos Orgánicos de Estaño/metabolismo , Estaciones del Año , Contaminantes Químicos del Agua/metabolismoRESUMEN
A new, simple, and fast electrochemical (EC) method has been developed to determine the release profile of piroxicam, a nonsteroidal anti-inflammatory drug, loaded in a drug delivery system based on nanostructured lipid carriers (NLCs). For the first time, the samples were analyzed by using square wave voltammetry, a sensitive EC technique. The piroxicam EC responses allow us to propose a model that explains the experimental results and to subsequently determine the amount of drug loaded into the NLCs formulation as a function of time. Inâ vitro drug release studies showed prolonged drug release (up to 5â days), releasing 60 % of the incorporated drug. The proposed method is a promising and stable alternative for the study of different drug delivery systems.
Asunto(s)
Antiinflamatorios no Esteroideos/administración & dosificación , Preparaciones de Acción Retardada/química , Técnicas Electroquímicas/métodos , Lípidos/química , Nanoestructuras/química , Piroxicam/administración & dosificación , Antiinflamatorios no Esteroideos/química , Liberación de Fármacos , Piroxicam/químicaRESUMEN
Aqueous mode size exclusion chromatography (SEC) was employed for the analysis and construction of molecular weight (MW) calibration curves of three water-soluble polymers, namely, polyethylene glycol, polyethylene oxide, and polyacrylic acid sodium salt. Several calibration curves were obtained, varying chromatographic conditions such as columns arrangement, ionic strength, temperature and pH, in addition trends in polymeric chromatographic behavior were examined. The variation in SEC distribution coefficients at different temperatures was found to be below 10 %, indicating that the studied polymers follow an ideal SEC mechanism under the tested conditions. Thus, differences in chromatographic behavior were ascribed to changes in polymer configuration induced by media and/or temperature. These variations in morphology were consistent with the observed SEC behavior. Regarding MW calibration, polynomial regression models ranging from first to fifth order were applied, and the most adequate ones were selected based on their fit and prediction capabilities. Third order polynomials were the preferred models for polyethylene glycol and polyacrylic acid sodium salt, independently of chromatographic conditions. Meanwhile for polyethylene oxide, either third or fifth-order polynomial models were optimal depending on the chromatographic conditions. All the selected regression models presented coefficients of multiple determination (R2) above 0.990, while achieving relative errors of prediction (REP%) in MW ranging from 0.3 to 4 % for cross-validation.
Asunto(s)
Cromatografía en Gel , Peso Molecular , Polietilenglicoles , Cromatografía en Gel/métodos , Calibración , Polietilenglicoles/química , Concentración Osmolar , Polímeros/química , Concentración de Iones de Hidrógeno , Resinas Acrílicas/química , TemperaturaRESUMEN
The synthesis and characterisation of new dyes based on indolizines bearing catechol groups in their structure is presented. The preparation was carried out through a simple three component one-pot reaction promoted by CuNPs/C, between pyridine-2-carbaldehyde, an aromatic alkyne and a tetrahydroisoquinoline (THIQ) functionalized with catechol groups. The products were isolated in 30%-34% yield, which was considered more than acceptable considering that the catechol hydroxyl groups were not protected prior to reaction. In view of the colour developed by the products and their response to the acidic and basic conditions of the medium, product 3aa was studied by UV-Vis and NMR spectroscopies at different pH values. We concluded that product 3aa suffered two deprotonations at pKa of 4.4 and 9.5, giving three species in a pH range between 2-12, with colours varying from light red to deep orange. The reversibility of the process observed for 3aa at different pH values, together with its changes in colour, make this new family of products attractive candidates to use them as pH indicators.
RESUMEN
The current study proposes a fast one-pot microwave assisted synthesis of new carbon dots (CDs) based on glycerol and urea. The novel carbon nanoparticles (GUCDs) have been appropriately characterized and exhibited good luminescent properties with a quantum yield of about 9.8%. Interestingly, the GUCDs are able to selectively interact with tetracycline class antibiotics, which produce a decrease in the native fluorescence of the CDs. On the base of these features, a new analytical method has been developed for the determination of tetracycline. The proposed method has shown satisfactory analytical parameters, such as good linearity range -between 0.5 and 25⯵Mâ¯(R2â¯=â¯0.9997)- and an acceptable detection limit (165â¯nM). Moreover, the new method has been successfully applied for tetracycline determination in urine samples with good recoveries (94.7-103%) and precision (4.6 RSD%).
Asunto(s)
Carbono/química , Puntos Cuánticos/química , Tetraciclina/orina , Carbono/efectos de la radiación , Fluorescencia , Fluorometría/métodos , Glicerol/química , Humanos , Concentración de Iones de Hidrógeno , Límite de Detección , Puntos Cuánticos/efectos de la radiación , Rayos Ultravioleta , Urea/químicaRESUMEN
Several areas within the Bahía Blanca estuary (BBE), with different maritime traffic intensity, were studied in order to confirm the presence and assess the distribution of tributyltin (TBT), dibutyltin (DBT), and monobutyltin (MBT) in the water column. The organotin compounds (OTCs) were determined in the water samples-taken in summer, autumn, winter, and spring of 2014-by gas chromatography coupled to mass spectrometry after liquid-liquid extraction with hexane. The incidence of TBT throughout the whole sampling period indicated a continuous presence of this compound to the study area. However, in accordance with the butyltin degradation index (BDI), TBT was not recently introduced in the BBE. Furthermore, the average TBT levels exceeded the international guideline established by the Oslo-Paris commission (0.62 ng Sn L-1). As a result, certain biological effects could be expected to occur in sensitive species such as mussels. While DBT were below the detection limit in the 75% of the samples analyzed, MBT was detected in all the samples and no significant differences were found among the concentrations measured in the different seasons (Kruskal-Wallis test, p > 0.05). In addition, no correlations were found among the OTCs levels and the evaluated physiochemical parameters (Spearman coefficient, p > 0.05).
Asunto(s)
Monitoreo del Ambiente , Estuarios , Compuestos Orgánicos de Estaño/análisis , Contaminantes Químicos del Agua/análisis , Animales , Argentina , Bivalvos , Brasil , Cromatografía de Gases y Espectrometría de Masas , Sedimentos Geológicos , Estaciones del Año , Compuestos de TrialquiltinaRESUMEN
A simple and fast capillary electrophoresis method has been developed to determine the amount of piroxicam loaded in a drug delivery system based on nanostructured lipid carriers (NLCs). The entrapment efficiency of the nanostructured lipid carrier was estimated by measuring the concentration of drug not entrapped in a suspension of NLC. The influence of different parameters on migration times, peak symmetry, efficiency and resolution was studied; these parameters included the pH of the electrophoretic buffer solution and the applied voltage. The piroxicam peak was obtained with a satisfactory resolution. The separation was carried out using a running buffer composed of 50 mM ammonium acetate and 13.75 mM ammonia at pH 9. The optimal voltage was 20 kV and the cartridge temperature was 20 °C. The corresponding calibration curve was linear over the range of 2.7-5.4 µg/mL of NLC suspension. The reproducibility of migration time and peak area were investigated, and the obtained RSD% values (n=5) were 0.99 and 2.13, respectively.
RESUMEN
On-line photodegradation and spectrophotometric analysis assisted by multivariate curve resolution-alternating least squares (MCR-ALS) was developed the simultaneous determination of ciprofloxacin (CIP) and dexamethasone (DEX) in ophthalmic suspensions using an automated flow-batch analysis (FBA) system. CIP and DEX have strongly overlapped UV spectra. Overcoming this lack of selectivity involves augmenting data dimensionality. This could be performed by adding information about the sample photodegradation to obtain the so-called second order advantage. Commercial sample analysis was successfully performed and no statistical differences (α = 0.05) with respect to pharmacopeia methods were obtained. The proposed method offers several advantages over the methods developed to date. In agreement with the principles of green chemistry, only water was used as solvent, low amounts of waste were generated and on-line waste treatment was included in the system. Moreover, the cost per analysis was significantly reduced compared to methods that employ separative techniques.
Asunto(s)
Ciprofloxacina/análisis , Dexametasona/análisis , Soluciones Oftálmicas/química , Fotólisis , Espectrofotometría Ultravioleta/instrumentaciónRESUMEN
The aim of this study was to assess metal mobility/availability in coastal surface (oxic) sediment samples from the Bahía Blanca estuary. Particularly, two sequential extraction procedures able to discriminate metals associated to amorphous Fe and Mn oxides and those associated with crystalline oxides of Fe were applied. Sequential procedures differ in the number of steps, type of reagents used, and in the order in which metals associated to organic matter are extracted. The studied metals were Cd, Cr, Cu, Pb, Ni and Zn because of their hazardous potential and relative abundance in the estuary. Tucker4 model with three factors describes appropriately the data sets (explained variance of 64.05%). This model made it possible to visualize and explain the information underlying in the data set. From the multivariate analysis, it was possible to evaluate the metal behaviour and their availability. In this way, Cd and Zn are associated to the more available fractions whereas Ni, Cr, Cu and Pb are mainly associated to the unavailable fractions. On the other hand, Zn and Cu are associated to organic matter fraction. Despite the fact that the two-fractionation schemes are quite different, the results obtained with both schemes are comparable.
Asunto(s)
Sedimentos Geológicos/química , Metales Pesados/química , Argentina , Fraccionamiento Químico , Estuarios , Modelos Teóricos , Óxidos/químicaRESUMEN
A green FBA method with UV detection was developed for simultaneous determination of ciprofloxacin (CIP) and dexamethasone (DEX) in ophthalmic and otic preparations. A lab-made mixing detection chamber (MDC) was designed and coupled to the spectrophotometer in order to perform the mixing of solutions and the detection in the same receptacle. Only water was used as solvent and no previous separation of the components was required. Both analytes have a strong absorption between 190 and 370 nm in aqueous medium, at pH 7. However, the spectrum of DEX is embedded in the CIP spectrum. Thus, while CIP was analyzed using univariate calibration, DEX analysis was carried out comparing partial least squares (PLS-1) and multiple linear regression (MLR). The latest required a previous variable selection step, which was performed using the genetic algorithm (GA) and the successive projections algorithm (SPA). The FBA system made it possible to automatically prepare the calibration and validation sets. The statistical parameters, in terms of relative errors of calibration and prediction, were acceptable for the determination of both CIP and DEX. Also, a comparative study of chemometric models was carried out. Commercial samples were analyzed and the obtained results are in close agreement with HPLC pharmacopeia methods. The joint interval test for the slope and the intercept was used to test for the presence of bias. There were no statistical differences between the proposed method and the reference method (α=0.05). The sample throughput was 10h(-1). The combination of automation and chemometric tools allows us to develop an environmental friendly method for the quality control of CIP and DEX in pharmaceuticals.
Asunto(s)
Algoritmos , Ciprofloxacina/análisis , Dexametasona/análisis , Soluciones Farmacéuticas/química , Espectrofotometría Ultravioleta/estadística & datos numéricos , Calibración , Análisis de Inyección de Flujo , Tecnología Química Verde , Concentración de Iones de Hidrógeno , Análisis de los Mínimos Cuadrados , Modelos Lineales , Solventes , Espectrofotometría Ultravioleta/métodos , AguaRESUMEN
A simple and fast on line spectrophotometric method combined with a hybrid hard-soft modeling multivariate curve resolution (HS-MCR) was proposed for the monitoring of photodegradation reaction of ciprofloxacin under UV radiation. The studied conditions attempt to emulate the effect of sunlight on these antibiotics that could be eventually present in the environment. The continuous flow system made it possible to study the ciprofloxacin degradation at different pH values almost at real time, avoiding errors that could arise from typical batch monitoring of the reaction. On the base of a concentration profiles obtained by previous pure soft-modeling approach, reaction pathways have been proposed for the parent compound and its photoproducts at different pH values. These kinetic models were used as a constraint in the HS-MCR analysis. The kinetic profiles and the corresponding pure response profile (UV-Vis spectra) of ciprofloxacin and its main degradation products were recovered after the application of HS-MCR analysis to the spectra recorded throughout the reaction. The observed behavior showed a good agreement with the photodegradation studies reported in the bibliography. Accordingly, the photodegradation reaction was studied by high performance liquid chromatography coupled with UV-Vis diode array detector (HPLC-DAD). The spectra recorded during the chromatographic analysis present a good correlation with the ones recovered by UV-Vis/HS-MCR method.
Asunto(s)
Antiinfecciosos/química , Ciprofloxacina/química , Fotólisis , Espectrofotometría/métodos , Estabilidad de Medicamentos , Diseño de Equipo , Concentración de Iones de Hidrógeno , Cinética , Modelos Químicos , Análisis Multivariante , Espectrofotometría/economía , Espectrofotometría/instrumentación , Rayos UltravioletaRESUMEN
A combination of kinetic spectroscopic monitoring and multivariate curve resolution-alternating least squares (MCR-ALS) was proposed for the enzymatic determination of levodopa (LVD) and carbidopa (CBD) in pharmaceuticals. The enzymatic reaction process was carried out in a reverse stopped-flow injection system and monitored by UV-vis spectroscopy. The spectra (292-600 nm) were recorded throughout the reaction and were analyzed by multivariate curve resolution-alternating least squares. A small calibration matrix containing nine mixtures was used in the model construction. Additionally, to evaluate the prediction ability of the model, a set with six validation mixtures was used. The lack of fit obtained was 4.3%, the explained variance 99.8% and the overall prediction error 5.5%. Tablets of commercial samples were analyzed and the results were validated by pharmacopeia method (high performance liquid chromatography). No significant differences were found (alpha=0.05) between the reference values and the ones obtained with the proposed method. It is important to note that a unique chemometric model made it possible to determine both analytes simultaneously.
Asunto(s)
Carbidopa/análisis , Levodopa/análisis , Preparaciones Farmacéuticas/química , Calibración , Carbidopa/metabolismo , Catecol Oxidasa/metabolismo , Diseño de Equipo , Ipomoea batatas/enzimología , Cinética , Análisis de los Mínimos Cuadrados , Levodopa/metabolismo , Análisis Multivariante , Valores de Referencia , Espectrofotometría/economía , Espectrofotometría/instrumentación , Espectrofotometría/métodosRESUMEN
A direct spectrophotometric method for the determination of three artificial colors--amaranth, sunset yellow FCF and tartrazine--in beverages samples is proposed. The spectra were recorded between 359 and 600 nm. The spectra of the samples (just filtrated), pure dyes (concentrations ranged between 0.01 and 1.8 mg L(-1) for amaranth, 0.08 and 4.4 mg L(-1) for sunset yellow and 0.04 and 1.8 mg L(-1) for tartrazine) and synthetic mixtures were disposed in a column-wise augmented data matrix. This kind of data structure, analyzed by multivariate curve resolution-alternating least squares (MCR-ALS) makes it possible to exploit the so called 'second order advantage'. MCR-ALS algorithm was applied to the experimental data under the non-negativity and equality constraints. As a result, the concentration of each dye in the samples and their corresponding pure spectra were obtained. The results were validated using internal reference materials and no significant differences were found (alpha=5%) between the reference values and the ones obtained with the proposed method. The second order advantage made it possible to obtain unbiased results even in the presence of interferences.
RESUMEN
A fast chromatographic methodology is presented for the analysis of three synthetic dyes in non-alcoholic beverages: amaranth (E123), sunset yellow FCF (E110) and tartrazine (E102). Seven soft drinks (purchased from a local supermarket) were homogenized, filtered and injected into the chromatographic system. Second order data were obtained by a rapid LC separation and DAD detection. A comparative study of the performance of two second order algorithms (MCR-ALS and U-PLS/RBL) applied to model the data, is presented. Interestingly, the data present time shift between different chromatograms and cannot be conveniently corrected to determine the above-mentioned dyes in beverage samples. This fact originates the lack of trilinearity that cannot be conveniently pre-processed and can hardly be modelled by using U-PLS/RBL algorithm. On the contrary, MCR-ALS has shown to be an excellent tool for modelling this kind of data allowing to reach acceptable figures of merit. Recovery values ranged between 97% and 105% when analyzing artificial and real samples were indicative of the good performance of the method. In contrast with the complete separation, which consumes 10 mL of methanol and 3 mL of 0.08 mol L(-1) ammonium acetate, the proposed fast chromatography method requires only 0.46 mL of methanol and 1.54 mL of 0.08 mol L(-1) ammonium acetate. Consequently, analysis time could be reduced up to 14.2% of the necessary time to perform the complete separation allowing saving both solvents and time, which are related to a reduction of both the costs per analysis and environmental impact.
Asunto(s)
Bebidas/análisis , Cromatografía Líquida de Alta Presión/métodos , Análisis de los Alimentos/métodos , Colorantes de Alimentos/análisis , Algoritmos , Colorante de Amaranto/análisis , Compuestos Azo/análisis , Cromatografía Líquida de Alta Presión/economía , Análisis de los Alimentos/economía , Análisis de los Mínimos Cuadrados , Modelos Químicos , Reproducibilidad de los Resultados , Tartrazina/análisisRESUMEN
Soft- and hard-modelling strategy was applied to near-infrared spectroscopy data obtained from monitoring the reaction between glycidyloxydimethylphenyl silane, a silicon-based epoxy monomer, and aniline. On the basis of the pure soft-modelling approach and previous chemical knowledge, a kinetic model for the reaction was proposed. Then, multivariate curve resolution-alternating least squares optimization was carried out under a hard constraint, that compels the concentration profiles to fulfil the proposed kinetic model at each iteration of the optimization process. In this way, the concentration profiles of each species and the corresponding kinetic rate constants of the reaction, unpublished until now, were obtained. The results obtained were contrasted with 13C NMR. The joint interval test of slope and intercept for detecting bias was not significant (alpha=5%).