Harmonisation of Dental Education in Europe - a survey about 15 years after visitation of dental schools participating in the DentEd project.

INTRODUCTION: The DentEd Thematic Networks (TNP) were funded from the EU to converge and harmonise the dental curricula. Forty-four dental schools participated in this visitation process between 1998 and 2002. The aim of the survey was to evaluate the implementation of the Dented outcomes in the curricula and if the concept of core competences are integrated in the curriculum. MATERIAL AND METHOD: In October 2012, questionnaires were sent out to all dental schools participated in the visitation process of Dented and Dented evolves. The main question blocs were as follows: structure of the curriculum and facilities, education of students, content and quality of education, assessment, research, European involvement and value of visit for the school. RESULTS: Twenty-five dental schools (57%) answered to the questionnaire. The responder represented 20 European countries of 22, whose schools were involved (91%). The self-assessment report was stimulating the continuation of curriculum improvement. Most of them acknowledge that major competences are essential outcome for the graduated dentist. Twelve schools (58%) rated the value of the DentEd visit with strong positive influence. DISCUSSION: The visits showed strengths, weaknesses and threats. Three-quarter of all schools implemented the European Credit Transfer System (ECTS). But most of them did not realize the unit of ECTS with modules among the Bologna process. CONCLUSION: The self-assessment report was a core issue for the continuation of curriculum improvement. The challenge for the ongoing curriculum improvement is the implementation of the module system among the Bologna recommendations.

Histological changes and changes in the myosin mRNA content of the porcine masticatory muscles after masseter treatment with botulinum toxin A.

OBJECTIVES: Botulinum toxin A (Botox) is increasingly used for treatment of muscle hyperfunction. For a better understanding of the possible morphologic and chewing changes in patients induced by a therapy with Botox, muscle fiber and myosin heavy chain (MyHC) mRNA alterations were examined in this animal study. MATERIALS AND METHODS: The investigation was carried out on 14-week-old pigs (seven treated animals, eight controls; calculated animal size with a power of 0.5). To initialise the total immobilisation of the right masseter, the Botox injection was distributed into ten areas. After a 56-day period, muscle tissue was taken from the left and right side of the masseter (three regions), temporal (two regions), medial pterygoid and geniohyoid muscles using a standardized method. The muscle fiber cross sections were examined immunohistochemically. Fiber staining was accomplished with antibodies to specific MyHC isoforms. The MyHC mRNA changes were analysed using real-time RT-PCR. RESULTS: Muscles adapt to such stress by changing fiber types and MyHC mRNA content. Paralysed masseters display atrophic changes while other masticatory muscles show hypertrophic changes. The results indicated that the typical distributions of type IIa und IIb fiber types in masticatory muscles were increased in the masseter muscles due to Botox application. On the other hand, the masseters without Botox in the treated group showed a significant increase of type I MyHC. CONCLUSIONS: Application of Botox may lead to uncontrolled structural changes in affected and unaffected muscles. CLINICAL RELEVANCE: Treatment of muscle hypertrophy with Botox may cause muscle imbalance.

Three-Dimensional Bone Block Planning for Mandibular Sagittal Bone Defect Reconstruction.

Bone defects seen in severe sagittal discrepancies between the maxilla and mandible do not solely qualify for orthodontic treatment. An interdisciplinary approach with the aid of a surgical, orthodontic, and periodontal team should be implemented in the treatment of such cases. Despite the use of standard treatment methods, the therapy is always planned and carried out individually for each patient. The surgical treatment of bone defects in the area of the jawbones is associated with a number of potential complications. Regenerative medicine, which has already been practiced in reconstructive surgery, is now gradually receiving more attention in the treatment of orthognathic defects. We developed a method for the reconstruction of the alveolar bone in the sagittal dimension using 3D allogenic graft blocks, as a preparing feature in the orthodontic treatment of borderline cases or as a treatment option for complications arising during general orthodontic treatment.

Conventionally ligated versus self-ligating metal brackets--a comparative study.

The purpose of this study was to compare the frictional properties of four self-ligating metal brackets, Speed, Damon 2, In-Ovation, and Time, with those of three conventionally ligated metal brackets, Time, Victory Twin, and Discovery. The self-ligating Time bracket can also be used as a conventionally ligated bracket. Friction was tested 20 times for each bracket/wire combination using a Zwick testing machine with stainless steel wires in three different wire dimensions (0.017 x 0.025, 0.018 x 0.025, and 0.019 x 0.025 inches). All brackets had a 0.022 inch slot and the prescription of an upper first premolar. The data were statistically analysed with unsigned comparisons of all bracket/wire combinations using the Mann-Whitney U-test and the Games-Howell post hoc test. The results showed almost all brackets to have the lowest frictional force with a wire dimension of 0.018 x 0.025 inch. Friction of the self-ligating brackets using wire with a dimension of 0.018 x 0.025 inches was 45-48 per cent lower than with 0.017 x 0.025 and 0.019 x 0.025 inch wires. Friction of the conventionally ligated brackets showed a 14 per cent or less reduced friction with 0.018 x 0.025 inch wire compared with 0.017 x 0.025 and 0.019 x 0.025 inch wires. The self-ligating metal brackets showed lower frictional forces with a 0.018 x 0.025 inch wire than conventionally ligated brackets, whereas conventionally ligated brackets showed lower friction with 0.017 x 0.025 and 0.019 x 0.025 inch wire. Friction values vary with different bracket/archwire combinations and, therefore, the choice of a bracket system for treatment should consider the correct wire dimension to produce the lowest possible frictional forces.

Ritually induced growth disturbances and deformities of the orofacial system--a contribution to cranial morphogenesis.

Numerous ritual acts involving the skull result in orofacial changes. The present study focuses on ritual acts of Brazilian Zoé Indians. A distinct deformation effect of the ritual act (wearing a lip-plug) on the morphology of the orofacial system is demonstrated and documented using jaw models. The studies show that the lip-plug significantly influences tooth position and jaw growth. While the maxilla displays palatal displacement of the lateral incisors and elevation of the palate, retraction occurs in the mandible depending upon plug size. Additionally, both the plug and the nutritional habits of the Indians induce marked abrasion of all teeth. Moreover, it is shown that the duration of lip-plug wear is an essential determinant of sustained orofacial changes.

Comparative clinical investigation of horizontal condylar inclination using the JMA electronic recording system and a protrusive wax record for setting articulators.

PURPOSE: The rationale for recording protrusive mandibular movement is to accurately adjust an articulator. Techniques to record condylar inclination include extraoral tracings and intraoral recording materials. This study compared horizontal condylar inclination angles (HCI) recorded with a protrusive interocclusal record and an electronic pantographic device, the Jaw Motion Analyzer (JMA). MATERIALS AND METHODS: Twenty-three volunteers (12 females; 11 males; mean age 46.7 years) were selected for this study. First, a protrusive interocclusal wax record after 5 mm protrusive movement was taken from the volunteers and the HCI angles were determined after mounting the volunteers' casts in 2 different articulators (SAM 2; Reference SL). Second, kinematic hinge axis and the HCIs were recorded after 5 mm protrusive movement from protrusive jaw tracks recorded with the JMA. ICC and mean values for HCI were used for statistical analysis. Mean differences of HCI between the measuring methods were compared by Bland Altman Plots. RESULTS: The agreement of the HCI between the articulators determined by the protrusive record was good. The mean HCI value recorded with the JMA was significantly higher compared to the values of the protrusive wax records. There was no agreement found between the different methods for calculating the HCI. CONCLUSION: A large variance in articulator settings obtained by interocclusal records is often found. The JMA was found reliable and valid for measuring HCI values. Within the limitations of this study, the use of a pantographic device should be considered for individually adjusting articulators rather than the use of protrusive records.

Changes in caveolin-1, caveolin-3 and vascular endothelial growth factor expression and protein content after botulinum toxin A injection in the right masseter muscle of dystrophin deficient (mdx-) mice.

Progressive muscle wasting, frequently associated with inflammation, muscle fibre degeneration and fibrosis, is a characteristic of DMD (Duchenne muscular dystrophy). Its most common used animal model, the mdx mouse, however can overcome muscle degeneration by regeneration processes and is for this reason not suitable to answer all scientific questions. The aim of this study was to evaluate the ability of botulinum toxin A (BTX-A) in breaking down muscle regeneration in mdx mice. For this purpose, the right masseter muscle of 100 days old mdx and healthy mice was paralyzed by a single specific intramuscular injection of BTX-A. After 21 days, right and left masseter and temporal muscles as well as tongue muscle were carefully dissected, and gene and protein expression of caveolin-1, caveolin-3 and vascular endothelial growth factor (VEGF) were determined using quantitative RT-PCR and Western blot technique. Statistics were performed using Student's t-test and Mann Whitney U-test (significance level: P ≤ 0.05). After BTX-A injection, in both mice strains and for all three studied genes, no significant differences in mRNA amount could be detected between treated and untreated masseter muscles. A significant increase in caveolin-1, caveolin-3 and VEGF mRNA expression could only be found in the right temporal muscle of control mice compared to the left side. All three investigated proteins were more frequent to be found in dystrophic masseter muscle samples compared to the corresponding control samples, whereas significant decreased caveolin-3 protein levels could only be detected in the treated masseter versus untreated masseter muscle of controls. In contrast to previous conclusions, with this study it was not possible to prove a BTX-A-induced dystrophic phenotype in control animals, in which only the known decreases of caveolin-3 protein expression could be verified due to denervation. At the same time, however, gene and protein expression in dystrophic mice was not changed after BTX-A injection.

The in vitro viability and growth of fibroblasts cultured in the presence of different bone grafting materials (NanoBone and Straumann Bone Ceramic).

Different clinical applications, including dentistry, are making increasing demands on bone grafting material. In the present study we have analysed the viability, proliferation and growth characteristics of fibroblasts cultured in vitro together with two different bone grafting materials, NanoBone and Straumann Bone Ceramic, over a period of 24 and 28 days respectively. Viability was measured at least every 72 hours by using the alamarBlue assay, a test that measures quantitatively cell proliferation and viability but does not require cell fixation or extraction. After one week of culture fibroblast viability was as high as in controls for both grafting materials and remained high (> 90%) for the duration of the experiment. Cell growth was evaluated microscopically. Scanning electron microscopy revealed a dense fibroblast growth at the surface of both bone grafting materials after three weeks of in vitro culture. Generally, our in vitro analyses contribute to further insights into cell - scaffold interactions.

The morphological and clinical relevance of mandibular and maxillary bone structures for implantation.

Tooth loss, which interrupts the biocybernetic feedback circuit of the masticatory system, changes the structures of the jaw bone: such changes are termed "inactivity atrophy". The mandible is subject to vertical atrophy and the maxilla is primarily subject to horizontal atrophy. The mandible possesses more compact bone, the maxilla more spongy; the resorption directions also differ (mandible: towards the oral aspect; maxilla: towards the vestibular). An implant helps to restore the biocybernetic feedback system. The amount of available bone, bone structure, and topographic conditions are crucial factors influencing implant success. Osseointegration is performed at an early stage (which includes bleeding, granulation tissue, foreign-body recognition, interactions) and at a late stage (so-called osseous bridging, development of fibrous and lamellar bone).

The ultrastructure and processing properties of Straumann Bone Ceramic and NanoBone.

The ultrastructure, fundamental chemistry, and processing modes of fully synthetic bone grafting materials are relevant to the reconstruction of osseous defects. Rapid progress in the profitable market of biomaterials has led to the development of various bone substitutes. Despite all these efforts, an ideal and full substitute of autologous bone is not yet in sight. With regard to anorganic calcium phosphate ceramics, Straumann Bone Ceramic and NanoBone are compared. These have a similar composition and are osteoconductive, which indispensably requires contact with well-vascularised bone.

Bone graft substitutes in periodontal and peri-implant bone regeneration.

Regenerative medicine provides different therapy alternatives alongside gold standard autogenous grafts for the treatment of periodontal or peri-implant osseous defects. Continuing progress in the field of alloplastic bone substitutes has yielded promising solutions to the appropriate indications with the membrane technique either alone or in combination with enamel matrix derivatives. Their clinical outcomes, however, still require critical discussion.

Histological and fluorescence microscopic examination of the bone/implant interface in orthodontic miniscrews (Mondeal).

The temporary nature of orthodontic implants demands optimisation of size and design in order to minimise damage and risk to the patient. Slender and shorter miniscrews offer the advantage over conventional implants of easier and more ubiquitous positioning with minimised risk of injury to neighbouring anatomical structures such as tooth roots, nerves or vessels. The question is raised, however, as to what extent these advantages are gained at the price of diminished stability or a more unfavourable bone interface. In order to evaluate the screw/bone interface, 14 orthodontic miniscrews (Mondeal Medical Systems, diameter: 1.5 mm, length: 9 mm) were inserted into the right and left mandibles of 7 pigs (Sus scrofa domestica). Bone fluorochromes were administered in a defined order for polychrome sequencing. The samples gathered after 70 days were analysed using histological techniques and fluorescence microscopy. The lower part of the self-tapping thread displayed undisturbed bone apposition. Fluorescence microscopy revealed remodelling and bone apposition within the thread grooves.

The use of ceramic drills on a zirconium oxide basis in bone preparation.

The favourable mechanical properties and high biocompatibility of the newly developed mixed ceramics composed of zirconium oxide and aluminium oxide have continuously extended the scope of their application. Rotating instruments on a zirconium oxide basis are regarded as superior to metal burs in dentoalveolar surgery in terms of favourable temperature effects on the surrounding bone tissue and the economic advantage that they wear slowly, enabling them to be used repeatedly. In this study ten round burs made of zirconium oxide and aluminium oxide mixed ceramics were used for typical dental-alveolar preparation types on an explanted pig jaw. Prior to the first and following the tenth application a scanning electron microscopic (SEM) analysis of possible wear signs was conducted. However, this revealed no evidence of wear or resulting loss of sharpness.

Bacterial colonisation of interior implant threads with and without sealing.

Premature loss of dental implants is due, apart from mechanical factors, to germrelated inflammation. Gaps and hollow spaces within the implant system, for example the gap between implant and abutment in the two-part implant system, may provide a bacterial reservoir causing or maintaining inflammation. The bacterial spectrum involved is similar to that found in periodontitis. This in vitro study aimed to scrutinise the capability of Porphyromonas gingivalis (DSM 20709), the bacterium blamed for inducing peri-implantitis, to pass the implant/abutment gap in titanium implant systems used for orthodontic anchorage and to remain vital in the interior. Additionally, the in vitro effectiveness of gutta percha for gap sealing was examined. Twelve titanium implants (Straumann, diameter: 3.3 mm, length 5.5 mm) were provided with abutments at a defined torque (20 Ncm), six of which were sealed with gutta percha before screwing in the abutment. Subsequently the implants were placed in a nutrient solution (thioglycolate boullion with haemin-menadione solution) that contained Porphyromonas gingivalis. Microbiological specimens were sampled from the implant interiors after 24 and 72 hours and analysed using culture methods. There was evidence that penetration of the periodontal pathogen Porphyromonas gingivalis to the implant interior may occur as early as after 24 hours. Microbes were also detected in the interior of implants sealed with gutta percha. The abutment/implant interface in vitro provides a microbiological leakage for the prospective peri-implantitis-inducing bacterium Porphyromonas gingivalis. Survival of the bacterium is possible in the interior, so that development of a bacterial reservoir is assumed. This in vitro trial produced no evidence that sealing with gutta percha is an effective means to prevent secondary bacterial colonisation in the implant interior.

The application of bone graft substitutes for alveolar ridge preservation after orthodontic extractions and for augmentation of residual cleft defects.

The use of bone substitute materials in orthodontics is to be considered prior to orthodontic space closure after tooth extraction during the treatment of marked crowding as well as for treatment of residual defects in cleft-lip-and-palate children. In both cases the common objective is structure preservation or augmentation of the alveolar ridge. The demands to be made on the synthetic bone graft substitute comprise not just complication-free and safe use but also the chance of early tooth movement into the treated defect area with sufficient stability of the new tooth position.

Requirements and infection prophylaxis for internally cooled implant drills.

Implant site preparation is crucially important to long-term success. Heat generation during drilling is unfavourable, since bone is relatively susceptible to heat, depending on its vascularisation and microstructure. Numerous factors such as drilling pressure, number of revolutions, drill design, wear and material, drilling depth and cooling influence heat generation. Internally cooled drills are, therefore, increasingly used, even though the improved cooling effect compared to conventional externally cooled drills is controversial. Internally cooled drills may have the disadvantage of a germ reservoir developing in the cooling channel. This study aimed to examine the effects of disinfection and sterilisation of internally cooled drills. After contamination of the cooling channel with suitable bioindicators (Enterococcus faecium, ATCC 6057 and spores of Bacillus stearothermophilus, ATCC 7953), the drills were disinfected (disinfection solution ID 220, Dürr Dental) and autoclaved (Webeco, E5S90, 134 degrees C, 2.6 bar, 5 min). Disinfection was not completely effective except after pre-cleaning. By means of sterilisation all spores of Bacillus stearothermophilus were completely killed. Internally cooled drills can be successfully disinfected by means of this hygienic procedure routinely used in dental practice and no source of infection is created.

The biodegradation of hydroxyapatite bone graft substitutes in vivo.

Hydroxyapatite (HA) ceramics are widely used for bone reconstruction. They are osteoconductive and serve as structural scaffolds for the deposition of new bone. Generally, scaffold materials should be degradable as they affect the mechanical properties of the reconstructed bone negatively. Degradation by osteoclasts during the bone remodelling process is desirable but often does not take place. In the current study we analysed by light microscopy the degradation of two granular HA implants in critically sized defects in the mandibula of Goettingen mini-pigs five weeks after implantation. Bio-Oss consists of sintered bovine bone and NanoBone is a synthetic HA produced in a sol-gel process in the presence of SiO2. We found that both biomaterials were degraded by osteoclasts with ruffled borders and acid phosphatase activity. The osteoclasts created resorption lacunae and resorptive trails and contained mineral particles. Frequently, resorption surfaces were in direct contact with bone formative surfaces on one granule. Granules, especially of NanoBone, were also covered by osteoclasts if located in vascularised connective tissue distant from bone tissue. However, this usually occurred without the creation of resorption lacunae. The former defect margins consisted of newly formed bone often without remnants of bone substitutes. Our results show that the degradation of both biomaterials corresponds to the natural bone degradation processes and suggest the possibility of complete resorption during bone remodelling.

The manufacture of synthetic non-sintered and degradable bone grafting substitutes.

A new synthetic bone grafting substitute (NanoBone, ARTOSS GmbH, Germany) is presented. This is produced by a new technique, the sol-gel-method. This bone grafting substitute consists of nanocrystalline hydroxyapatite (HA) and nanostructured silica (SiO2). By achieving a highly porous structure good osteoconductivity can be seen. In addition, the material will be completely biodegraded and new own bone is formed. It has been demonstrated that NanoBone is biodegraded by osteoclasts in a manner comparable to the natural bone remodelling process.

Bone functions and the requirements for bone grafts and substitutes in the orofacial region.

Bone is the largest calcium storage, has distinctive plasticity and adaptability and is part of the supporting tissue. An adequate composition is thus necessary. The bone matrix consists of organic and anorganic structures. Osteoblasts, osteoclasts and osteocytes are responsible for bone formation, resorption and metabolism. The periosteum, endosteum and bone tissue are a functional unit and provide protection, nutrition and growth. Bone is subject to continuous remodelling.

The survival and proliferation of fibroblasts on orthodontic miniscrews with different surface treatment: an in vitro study.

It is of fundamental importance for prosthodontic and orthodontic applications that there is a short osseointegration time of dental implants without inflammation of the surrounding tissue. In addition to the chemical properties of the implant material, the surface morphology is an equally critical parameter. The objective of this work was to study the effect of two simple surface treatments on the survival and proliferation of fibroblasts. Three groups of orthodontic miniscrews (Mondeal) were used. One group was given an airflow (EMS, Schweiz) treatment, the second was sand-blasted in the area of the threading and a third group served as a control. After preparation sterilised screws were cultured in vitro with fibroblasts (L-929). The metabolic cell activity on the implant surface was determined after 24, 48 and 120 hours using the alamarBlue assay and a count of DAPI labelled fibroblasts was performed with a fluorescence microscope. After 24 hours, but not at 48 hours and 120 hours, the metabolic activity of the fibroblasts was slightly decreased for the airflow screw group. Generally, no significant difference was found regarding metabolic activity and proliferation of fibroblasts within the different groups.