RESUMEN
Therapeutic proteins can be challenging to develop due to their complexity and the requirement of an acceptable formulation to ensure patient safety and efficacy. To date, there is no universal formulation development strategy that can identify optimal formulation conditions for all types of proteins in a fast and reliable manner. In this work, high-throughput characterization, employing a toolbox of five techniques, was performed on 14 structurally different proteins formulated in 6 different buffer conditions and in the presence of 4 different excipients. Multivariate data analysis and chemometrics were used to analyze the data in an unbiased way. First, observed changes in stability were primarily determined by the individual protein. Second, pH and ionic strength are the two most important factors determining the physical stability of proteins, where there exists a significant statistical interaction between protein and pH/ionic strength. Additionally, we developed prediction methods by partial least-squares regression. Colloidal stability indicators are important for prediction of real-time stability, while conformational stability indicators are important for prediction of stability under accelerated stress conditions at 40 °C. In order to predict real-time storage stability, protein-protein repulsion and the initial monomer fraction are the most important properties to monitor.
Asunto(s)
Anticuerpos Monoclonales , Quimiometría , Humanos , Estabilidad Proteica , Anticuerpos Monoclonales/química , Desplegamiento Proteico , Conformación Proteica , Estabilidad de MedicamentosRESUMEN
Using light scattering (LS), small-angle X-ray scattering (SAXS), and coarse-grained Monte Carlo (MC) simulations, we studied the self-interactions of two monoclonal antibodies (mAbs), PPI03 and PPI13. With LS measurements, we obtained the osmotic second virial coefficient, B22, and the molecular weight, Mw, of the two mAbs, while with SAXS measurements, we studied the mAbs' self-interaction behavior in the high protein concentration regime up to 125 g/L. Through SAXS-derived coarse-grained representations of the mAbs, we performed MC simulations with either a one-protein or a two-protein model to predict B22. By comparing simulation and experimental results, we validated our models and obtained insights into the mAbs' self-interaction properties, highlighting the role of both ion binding and charged patches on the mAb surfaces. Our models provide useful information about mAbs' self-interaction properties and can assist the screening of conditions driving to colloidal stability.
Asunto(s)
Anticuerpos Monoclonales , Anticuerpos Monoclonales/química , Método de Montecarlo , Dispersión del Ángulo Pequeño , Difracción de Rayos X , Rayos XRESUMEN
Therapeutic protein candidates should exhibit favorable properties that render them suitable to become drugs. Nevertheless, there are no well-established guidelines for the efficient selection of proteinaceous molecules with desired features during early stage development. Such guidelines can emerge only from a large body of published research that employs orthogonal techniques to characterize therapeutic proteins in different formulations. In this work, we share a study on a diverse group of proteins, including their primary sequences, purity data, and computational and biophysical characterization at different pH and ionic strength. We report weak linear correlations between many of the biophysical parameters. We suggest that a stability comparison of diverse therapeutic protein candidates should be based on a computational and biophysical characterization in multiple formulation conditions, as the latter can largely determine whether a protein is above or below a certain stability threshold. We use the presented data set to calculate several stability risk scores obtained with an increasing level of analytical effort and show how they correlate with protein aggregation during storage. Our work highlights the importance of developing combined risk scores that can be used for early stage developability assessment. We suggest that such scores can have high prediction accuracy only when they are based on protein stability characterization in different solution conditions.
Asunto(s)
Anticuerpos Monoclonales/química , Descubrimiento de Drogas/métodos , Inmunoglobulina G/química , Interferón alfa-2/química , Desplegamiento Proteico , Albúmina Sérica Humana/química , Transferrina/química , Secuencia de Aminoácidos , Almacenaje de Medicamentos , Humanos , Concentración de Iones de Hidrógeno , Concentración Osmolar , Agregado de Proteínas , Estabilidad Proteica , Proyectos de Investigación , SolubilidadRESUMEN
The nature of (imide)N-Xâ¯N(pyridine) halogen-bonded complexes formed by six N-haloimides and sixteen 2-substituted pyridines are studied using X-ray crystallography (68 crystal structures), Density Functional Theory (DFT) (86 complexation energies), and NMR spectroscopy (90 association constants). Strong halogen bond (XB) donors such as N-iodosuccinimide form only 1:1 haloimide:pyridine crystalline complexes, but even stronger N-iodosaccharin forms 1:1 haloimide:pyridine and three other distinct complexes. In 1:1 haloimide:pyridine crystalline complexes, the haloimide's NâX bond exhibits an unusual bond bending feature that is larger for stronger N-haloimides. DFT complexation energies (ΔEXB ) for iodoimide-pyridine complexes range from -44 to -99 kJ mol-1 , while for N-bromoimide-pyridine, they are between -31 and -77 kJ mol-1 . The ΔEXB of Iâ¯N XBs in 1:1 iodosaccharin:pyridine complexes are the largest of their kind, but they are substantially smaller than those in [bis(saccharinato)iodine(I)]pyridinium salts (-576 kJ mol-1 ), formed by N-iodosaccharin and pyridines. The NMR association constants and ΔEXB energies of 1:1 haloimide:pyridine complexes do not correlate as these complexes in solution are heavily influenced by secondary interactions, which DFT studies do not account for. Association constants follow the σ-hole strengths of N-haloimides, which agree with DFT and crystallography data. The haloimide:2-(N,N-dimethylamino)pyridine complex undergoes a halogenation reaction resulting in 5-iodo-2-dimethylaminopyridine.
RESUMEN
The viscosity of a monoclonal antibody solution must be monitored and controlled as it can adversely affect product processing, packaging and administration. Engineering low viscosity mAb formulations is challenging as prohibitive amounts of material are required for concentrated solution analysis, and it is difficult to predict viscosity from parameters obtained through low-volume, high-throughput measurements such as the interaction parameter, kD, and the second osmotic virial coefficient, B22. As a measure encompassing the effect of intermolecular interactions on dilute solution viscosity, the Huggins coefficient, kh, is a promising candidate as a parameter measureable at low concentrations, but indicative of concentrated solution viscosity. In this study, a differential viscometry technique is developed to measure the intrinsic viscosity, [η], and the Huggins coefficient, kh, of protein solutions. To understand the effect of colloidal protein-protein interactions on the viscosity of concentrated protein formulations, the viscometric parameters are compared to kD and B22 of two mAbs, tuning the contributions of repulsive and attractive forces to the net protein-protein interaction by adjusting solution pH and ionic strength. We find a strong correlation between the concentrated protein solution viscosity and the kh but this was not observed for the kD or the b22, which have been previously used as indicators of high concentration viscosity. Trends observed in [η] and kh values as a function of pH and ionic strength are rationalised in terms of protein-protein interactions.
Asunto(s)
Anticuerpos Monoclonales , Concentración de Iones de Hidrógeno , Concentración Osmolar , Ósmosis , Soluciones , ViscosidadRESUMEN
Opalescence measurements are broadly applied to assess the quality and stability of biopharmaceutical products at all stages of development and manufacturing. They appear to be simple and straight forward but detect complex light scattering phenomena. Despite a routine calibration step, opalescence values obtained with the same biopharmaceutical sample but on different instruments and/or with different methods may vary significantly. Since the reasons for this high variability are generally not well understood, comparison of opalescence results from different biopharmaceutical laboratories is difficult. Here, we characterized a comprehensive set of biopharmaceutically relevant samples with five opalescence methods to illustrate fundamental differences in method performance and explore the reasons for poor comparability. In addition, we developed a high-throughput method for measuring opalescence in a conventional light scattering plate reader that yields opalescence values in the same range as compendial methods. The presented results underline the impact of sample properties, instrument type, and calibration standards on the determined opalescence value. Based on our findings we provide recommendations for the appropriate application of each method during biopharmaceutical drug product development. Overall, our study contributes to an improved understanding of opalescence measurements in the biopharmaceutical field.
Asunto(s)
Productos Biológicos , IridiscenciaRESUMEN
Hexamethylenetetramine (HMTA) and N-haloimides form two types of short (imide)X···N and X-X···N (X = Br, I) halogen bonds. Nucleophilic substitution or ligand-exchange reaction on the peripheral X of X-X···N with the chloride of N-chlorosuccinimide lead to Cl-X···N halogen-bonded complexes. The 1:1 complexation of HMTA and ICl manifests the shortest I···N halogen bond [2.272(5) Å] yet reported for an HMTA acceptor. Two halogen-bonded organic frameworks are prepared using 1:4 molar ratio of HMTA and N-bromosuccinimide, each with a distinct channel shape, one possessing oval and the other square grid. The variations in channel shapes are due to tridentate and tetradentate (imide)Br···N coordination modes of HMTA. Density Functional Theory (DFT) studies are performed to gain insights into (imide)X···N interaction strengths (ΔEint). The calculated ΔEint values for (imide)Br···N (-11.2 to -12.5 kcal/mol) are smaller than the values for (imide)I···N (-8.4 to -29.0 kcal/mol). The DFT additivity analysis of (imide)Br···N motifs demonstrates Br···N interaction strength gradually decreasing from 1:1 to 1:3 HMTA:N-bromosuccinimide complexes. Exceptionally similar charge density values ρ(r) for N-I covalent bond and I···N non-covalent bond of a (saccharin)N-I···N motif signify the covalent character for I···N halogen bonding.
RESUMEN
An important aspect of initial developability assessments as well formulation development and selection of therapeutic proteins is the evaluation of data obtained under accelerated stress condition, i.e. at elevated temperatures. We propose the application of artificial neural networks (ANNs) to predict long term stability in real storage condition from accelerated stability studies and other high-throughput biophysical properties e.g. the first apparent temperature of unfolding (Tm). Our models have been trained on therapeutic relevant proteins, including monoclonal antibodies, in various pharmaceutically relevant formulations. Further, we developed network architectures with good prediction power using the least amount of input features, i.e. experimental effort to train the network. This provides an empiric means to highlight the most important parameters in the prediction of real-time protein stability. Further, several models were developed by a different validation means (i.e. leave-one-protein-out cross-validation) to test the robustness and the limitations of our approach. Finally, we apply surrogate machine learning algorithms (e.g. linear regression) to build trust in the ANNs decision making procedure and to highlight the connection between the leading inputs and the outputs.
Asunto(s)
Estabilidad de Medicamentos , Almacenaje de Medicamentos/estadística & datos numéricos , Aprendizaje Automático , Estabilidad Proteica , Algoritmos , Calor , Modelos Teóricos , Redes Neurales de la Computación , Factores de TiempoRESUMEN
The native reversible self-association of monoclonal antibodies has been associated with high viscosity, liquid-liquid, and liquid-solid phase separation. We investigated the native reversible self-association of an IgG1, which exerts this association even at low protein concentrations, in detail to gain further understanding of this phenomenon by extensive characterization of the association as a function of multiple factors, namely pH, temperature, salt concentration, and protein concentration. The nature of the self-association of the full-length IgG1 as well as the corresponding Fab and Fc fragment was studied by viz. size exclusion chromatography combined with multiangle light scattering, batch dynamic and static light scattering, analytical ultracentrifugation, small angle X-ray scattering, asymmetric flow field flow fractionation coupled with multiangle light scattering, and intrinsic fluorescence. We rationalized the self-association as a combination of hydrophobic and electrostatic interactions driven by the Fab fragments. Finally, we investigated the long-term stability of the IgG1 molecule.
Asunto(s)
Anticuerpos Monoclonales/química , Fragmentos Fab de Inmunoglobulinas/química , Fragmentos Fc de Inmunoglobulinas/química , Inmunoglobulina G/química , Agregado de Proteínas , Química Farmacéutica , Cromatografía en Gel , Cromatografía Líquida de Alta Presión , Estabilidad de Medicamentos , Dispersión Dinámica de Luz , Concentración de Iones de Hidrógeno , Interacciones Hidrofóbicas e Hidrofílicas , Estabilidad Proteica , Temperatura , Ultracentrifugación , ViscosidadRESUMEN
Transferrin is an attractive candidate for drug delivery due to its ability to cross the blood brain barrier. However, in order to be able to use it for therapeutic purposes, it is important to investigate how its stability depends on different formulation conditions. Combining high-throughput thermal and chemical denaturation studies with small angle X-ray scattering (SAXS) and molecular dynamics (MD) simulations, it was possible to connect the stability of transferrin with its conformational changes. Lowering pH induces opening of the transferrin N-lobe, which results in a negative effect on the stability. Presence of NaCl or arginine at low pH enhances the opening and has a negative impact on the overall protein stability. STATEMENT OF SIGNIFICANCE: Protein-based therapeutics have become an essential part of medical treatment. They are highly specific, have high affinity and fewer off-target effects. However, stabilization of proteins is critical, time-consuming, and expensive, and it is not yet possible to predict the behavior of proteins under different conditions. The current work is focused on a molecular understanding of the stability of human serum transferrin; a protein which is abundant in blood serum, may pass the blood brain barrier and therefore with high potential in drug delivery. Combination of high throughput unfolding techniques and structural studies, using small angle X-ray scattering and molecular dynamic simulations, allows us to understand the behavior of transferrin on a molecular level.
RESUMEN
Multi-angle light scattering coupled with size-exclusion chromatography (SEC-MALS) is a standard approach for protein characterization. Recently MALS detection has been coupled with ion-exchange chromatography (IEX) which demonstrated the feasibility and high value of MALS in combination with non-sized-based fractionation methods. In this study we coupled reverse-phase ultra-high pressure liquid chromatography (RP-UPLC) with a low-dispersion MALS detector for the characterization of intact monoclonal antibody (mAbs) and their fragments. We confirmed a constant refractive index increment value for mAbs in RP gradients, in good agreement with the values in literature for other classes of proteins. We showed that the impurities eluting from a RP column can often be related to aggregated species and we confirmed that in most cases those oligomers are present also in SEC-MALS. Yet, in few cases small aggregates fractions in RP-UPLC are an artifact. In fact, proteins presenting thermal and physical stability not suitable for the harsh condition applied during the RP separation of mAbs (i.e. organic solvents at high temperature) can aggregate. Further, we applied RP-UPLC-MALS during a long term stability studies. The different principle of separation used in RP-UPLC- MALS provides an additional critical level of protein characterization compared to SEC-MALS and IEX-MALS.
Asunto(s)
Anticuerpos Monoclonales/química , Cromatografía en Gel/métodos , Cromatografía Líquida de Alta Presión/métodos , Cromatografía de Fase Inversa/métodos , Humanos , Concentración de Iones de Hidrógeno , Luz , Peso Molecular , Péptidos/química , Refractometría , Dispersión de Radiación , TemperaturaRESUMEN
The development of a new protein drug typically starts with the design, expression and biophysical characterization of many different protein constructs. The initially high number of constructs is radically reduced to a few candidates that exhibit the desired biological and physicochemical properties. This process of protein expression and characterization to find the most promising molecules is both expensive and time-consuming. Consequently, many companies adopt and implement philosophies, e.g. platforms for protein expression and formulation, computational approaches, machine learning, to save resources and facilitate protein drug development. Inspired by this, we propose the use of interpretable artificial neuronal networks (ANNs) to predict biophysical properties of therapeutic monoclonal antibodies i.e. melting temperature Tm, aggregation onset temperature Tagg, interaction parameter kD as a function of pH and salt concentration from the amino acid composition. Our ANNs were trained with typical early-stage screening datasets achieving high prediction accuracy. By only using the amino acid composition, we could keep the ANNs simple which allows for high general applicability, robustness and interpretability. Finally, we propose a novel "knowledge transfer" approach, which can be readily applied due to the simple algorithm design, to understand how our ANNs come to their conclusions.
Asunto(s)
Anticuerpos Monoclonales/química , Algoritmos , Química Farmacéutica/métodos , Desarrollo de Medicamentos/métodos , Concentración de Iones de Hidrógeno , Aprendizaje Automático , Redes Neurales de la Computación , TemperaturaRESUMEN
The early-stage assessment of the physical stability of new monoclonal antibodies in different formulations is often based on high-throughput techniques that suffer from various drawbacks. Accordingly, new approaches that facilitate the protein formulation development can be of high value to the industry. In this study, a dynamic light scattering plate reader is used to measure the aggregation (by means of the increase in the hydrodynamic radius [Rh]) of monoclonal antibody samples that were subject to incubation and subsequent dilution from different concentrations of a denaturing agent, that is, guanidine hydrochloride. The increase in the Rh of the protein samples is dependent not only on the denaturant concentration used but also on the buffer in which the incubation/dilution was performed. We also compare the aggregation after dilution from a denaturant with other high-throughput stability-indicating methods and find good agreement between the techniques. The proposed approach to probe the physical stability of monoclonal antibodies in different formulation conditions offers a unique combination of features-it is isothermal, probes both the resistance to denaturant-induced unfolding and the colloidal protein stability, it is entirely label-free, does not rely on complex data evaluation, and requires very short instrument measurement time on standard equipment.