RESUMEN
Two different mechanism pathways are observed for the reaction of allylsilyl alcohols 1 and aldehydes in the presence of trimethylsilyl trifluoromethanesulfonate (TMSOTf). In the case of allylsilyl alcohols without allylic substituents, the reaction gives dioxaspirodecanes, which are the products of a tandem Sakurai-Prins cyclization. In contrast, allylsilyl alcohols with an allylic substituent (R(2)≠H) selectively provide oxepanes, thus corresponding to a direct silyl-Prins cyclization. Both types of product are obtained with excellent stereoselectivity. Theoretical studies have been performed to obtain some rationalization for the observed stereoselectivity.
Asunto(s)
Alcoholes/química , Aldehídos/química , Mesilatos/química , Compuestos de Trimetilsililo/química , Compuestos Alílicos/química , Catálisis , Ciclización , Compuestos de Espiro/química , EstereoisomerismoRESUMEN
Two families of regioisomeric 1,4-benzodiazepines, 4-benzyl-3H-benzo[e][1,4]diazepin-5-ones and 4-benzoyl-4,5-dihydro-3H-benzo[e][1,4]diazepines, have been synthesized through a similar Ugi/reduction cyclization sequence. Their conformation and stability depend on the position of the tautomeric imine/enamine equilibrium present in the diazepine nucleus, which in turn depends on the relative position of the carbonyl group adjacent to the nitrogen at the 4-position in the benzodiazepine system. Moreover, the electrophilic center on the imine tautomer is essential for the antitumor activity of some benzodiazepines as a DNA binding position. The mechanism of tautomerization in the presence or absence of the oxo group has been studied computationally using DFT methods (B3LYP/6-31G** level).
Asunto(s)
Benzodiazepinas/síntesis química , Benzodiazepinas/química , Modelos TeóricosRESUMEN
Complementary regioselective synthesis of iminohydantoins from isocyanoacetamides controlled by the substituent on the amide group has been described. 4-Iminohydantoins were the major products when the starting materials were N-alkyl isocyanoamides, whereas 2-iminohydantoins were the major products with N-aryl isocyanoamides.
Asunto(s)
Amidas/química , Hidantoínas/síntesis química , Iminas/síntesis química , Amidas/síntesis química , Ciclización , Hidantoínas/química , Iminas/química , Nitrilos/síntesis química , Nitrilos/químicaRESUMEN
An optimized synthesis of the monomer 2,2'3,3'-biphenyltetracarboxylic dianhydride, iBPDA, was performed to obtain high molecular weight polymers. This monomer has a contorted structure that produces a non-linear shape, hindering the packing of the polymer chain. Aromatic polyimides of high molecular weight were obtained by reaction with the commercial diamine 2,2-bis(4-aminophenyl) hexafluoropropane, 6FpDA, which is a very common monomer in gas separation applications. This diamine has hexafluoroisopropylidine groups which introduce rigidity in the chains, hindering efficient packing. The thermal treatment of the polymers processed as dense membranes had two targets: on the one hand, to achieve the complete elimination of the solvent used, which could remain occluded in the polymeric matrix, and on the other hand to ensure the complete cycloimidization of the polymer. A thermal treatment exceeding the glass transition temperature was performed to ensure the maximum degree of imidization at 350 °C. The good mechanical properties of these materials allow for their use in high-pressure gas purification applications. Moreover, models of the polymers exhibited an Arrhenius-like behavior characteristic of secondary relaxations, normally associated with local motions of the molecular chain. The gas productivity of these membranes was high.
RESUMEN
A set of thermally rearranged mixed matrix membranes (TR-MMMs) was manufactured and tested for gas separation. These membranes were obtained through the thermal treatment of a precursor MMM with a microporous polymer network and an o-hydroxypolyamide,(HPA) created through a reaction of 2,2-bis(3-amino-4-hydroxyphenyl)-hexafluoropropane (APAF) and 5'-terbutil-m-terfenilo-3,3â³-dicarboxylic acid dichloride (tBTmCl). This HPA was blended with different percentages of a porous polymer network (PPN) filler, which produced gas separation MMMs with enhanced gas permeability but with decreased selectivity. The thermal treatment of these MMMs gave membranes with excellent gas separation properties that did not show the selectivity decreasing trend. It was observed that the use of the PPN load brought about a small decrease in the initial mass losses, which were lower for increasing PPN loads. Regarding the glass transition temperature, it was observed that the use of the filler translated to a slightly lower Tg value. When these MMMs and TR-MMMs were compared with the analogous materials created from the isomeric 5'-terbutil-m-terfenilo-4,4â³-dicarboxylic acid dichloride (tBTpCl), the permeability was lower for that of tBTmCl, compared with the one from tBTpCl, although selectivity was quite similar. This fact could be attributed to a lower rigidity as roughly confirmed by the segmental length of the polymer chain as studied by WAXS. A model for FFV calculation was proposed and its predictions compared with those evaluated from density measurements assuming a matrix-filler interaction or ideal independence. It turns out that permeability as a function of FFV for TR-MMMs follows an interaction trend, while those not thermally treated follow the non-interaction trend until relatively high PPN loads were reached.
RESUMEN
Mixed matrix membranes (MMMs) consisting of a blend of a hydroxypolyamide (HPA) matrix and variable loads of a porous polymer network (PPN) were thermally treated to induce the transformation of HPA to polybenzoxazole (ß-TR-PBO). Here, the HPA matrix was a hydroxypolyamide having two hexafluoropropyilidene moieties, 6FCl-APAF, while the PPN was prepared by reacting triptycene (TRP) and trifluoroacetophenone (TFAP) in a superacid solution. The most probable size of the PPN particles was 75 nm with quite large distributions. The resulting membranes were analyzed by SEM and AFM. Up to 30% PPN loads, both SEM and AFM images confirmed quite planar surfaces, at low scale, with limited roughness. Membranes with high hydrogen permeability and good selectivity for the gas pairs H2/CH4 and H2/N2 were obtained. For H2/CO2, selectivity almost vanished after thermal rearrangement. In all cases, their hydrogen permeability increased with increasing loads of PPN until around 30% PPN with ulterior fairly abrupt decreasing of permeability for all gases studied. Thermal rearrangement of the MMMs resulted in higher permeabilities but lower selectivities. For all the membranes and gas pairs studied, the balance of permeability vs. selectivity surpassed the 1991 Robeson's upper bound, and approached or even exceeded the 2008 line, for MMMs having 30% PPN loads. In all cases, the HPA-MMMs before thermal rearrangement provided good selectivity versus permeability compromise, similar to their thermally rearranged counterparts but in the zone of high selectivity. For H2/CH4, H2/N2, these nonthermally rearranged MMMs approach the 2008 Robeson's upper bound while H2/CO2 gives selective transport favoring H2 on the 1991 Robeson's bound. Thus, attending to the energy cost of thermal rearrangement, it could be avoided in some cases especially when high selectivity is the target rather than high permeability.
RESUMEN
A hydroxypolyamide (HPA) manufactured from 2,2-bis(3-amino-4-hydroxy phenyl)-hexafluoropropane (APAF) diamine and 5'-terbutyl-m-terphenyl-4,4''-dicarboxylic acid chloride (tBTpCl), and a copolyimide produced by stochiometric copolymerization of APAF and 4,4'-(hexafluoroisopropylidene) diamine (6FpDA), using the same diacid chloride, were obtained and used as polymeric matrixes in mixed matrix membranes (MMMs) loaded with 20% (w/w) of two porous polymer networks (triptycene-isatin, PPN-1, and triptycene-trifluoroacetophenone, PPN-2). These MMMs, and also the thermally rearranged membranes (TR-MMMs) that underwent a thermal treatment process to convert the o-hydroxypolyamide moieties to polybenzoxazole ones, were characterized, and their gas separation properties evaluated for H2, N2, O2, CH4, and CO2. Both TR process and the addition of PPN increased permeability with minor decreases in selectivity for all gases tested. Excellent results were obtained, in terms of the permeability versus selectivity compromise, for H2/CH4 and H2/N2 separations with membranes approaching the 2008 Robeson's trade-off line. The best gas separation properties were obtained when PPN-2 was used. Finally, gas permeation was characterized in terms of chain intersegmental distance and fraction of free volume of the membrane along with the kinetic diameters of the permeated gases. The intersegmental distance increased after TR and/or the addition of PPN-2. Permeability followed an exponential dependence with free volume and a quadratic function of the kinetic diameter of the gas.
RESUMEN
A new generation of porous polymer networks has been obtained in quantitative yield by reacting two rigid trifunctional aromatic monomers (1,3,5-triphenylbenzene and triptycene) with two ketones having electron-withdrawing groups (trifluoroacetophenone and isatin) in superacidic media. The resulting amorphous networks are microporous materials, with moderate Brunauer-Emmett-Teller surface areas (from 580 to 790 m2 g-1), and have high thermal stability. In particular, isatin yields networks with a very high narrow microporosity contribution, 82% for triptycene and 64% for 1,3,5-triphenylbenzene. The existence of favorable interactions between lactams and CO2 molecules has been stated. The materials show excellent CO2 uptakes (up to 207 mg g-1 at 0 °C/1 bar) and can be regenerated by vacuum, without heating. Under postcombustion conditions, their CO2/N2 selectivities are comparable to those of other organic porous networks. Because of the easily scalable synthetic method and their favorable characteristics, these materials are very promising as industrial adsorbents.
RESUMEN
The synthesis of seven-membered nitrogen heterocycles by silyl-aza-Prins cyclization is described. The process provides trans-azepanes in high yields and good to excellent diastereoselectivities. Moreover, the reaction outcome is dependent on the Lewis acid employed. Thus, while azepanes are selectively obtained when InCl3 is used, the reaction in the presence of TMSOTf provides tetrahydropyran derivatives corresponding to a tandem Sakurai-Prins cyclization.