RESUMEN
The mechanism of nitric oxide electroreduction on Pt(111) is investigated using a combination of first principles calculations and electrokinetic rate theories. Barriers for chemical cleavage of N-O bonds on Pt(111) are found to be inaccessibly high at room temperature, implying that explicit electrochemical steps, along with the aqueous environment, play important roles in the experimentally observed formation of ammonia. Use of explicit water models, and associated determination of potential-dependent barriers based on Bulter-Volmer kinetics, demonstrate that ammonia is produced through a series of water-assisted protonation and bond dissociation steps at modest voltages (<0.3â V). In addition, the analysis sheds light on the poorly understood formation mechanism of nitrous oxide (N2 O) at higher potentials, which suggests that N2 O is not produced through a Langmuir-Hinshelwood mechanism; rather, its formation is facilitated through an Eley-Rideal-type process.
Asunto(s)
Amoníaco/química , Óxido Nítrico/química , Platino (Metal)/química , Modelos MolecularesRESUMEN
Design and synthesis of materials for efficient electrochemical transformation of water to molecular hydrogen and of hydroxyl ions to oxygen in alkaline environments is of paramount importance in reducing energy losses in water-alkali electrolysers. Here, using 3d-M hydr(oxy)oxides, with distinct stoichiometries and morphologies in the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) regions, we establish the overall catalytic activities for these reaction as a function of a more fundamental property, a descriptor, OH-M(2+δ) bond strength (0 ≤ δ ≤ 1.5). This relationship exhibits trends in reactivity (Mn < Fe < Co < Ni), which is governed by the strength of the OH-M(2+δ) energetic (Ni < Co < Fe < Mn). These trends are found to be independent of the source of the OH, either the supporting electrolyte (for the OER) or the water dissociation product (for the HER). The successful identification of these electrocatalytic trends provides the foundation for rational design of 'active sites' for practical alkaline HER and OER electrocatalysts.
RESUMEN
The efficiency of proton exchange membrane fuel cells is limited mainly by the oxygen reduction reaction at the cathode. The large cathodic overpotential is caused by correlations between binding energies of reaction intermediates in the reduction of oxygen to water. This work introduces a novel tandem cathode design where the full oxygen reduction, involving four electron-transfer steps, is divided into formation (equilibrium potential 0.70 V) followed by reduction (equilibrium potential 1.76 V) of hydrogen peroxide. The two part reactions contain only two electron-transfer steps and one reaction intermediate each, and they occur on different catalyst surfaces. As a result they can be optimized independently and the fundamental problem associated with the four-electron catalysis is avoided. A combination of density functional theory calculations and published experimental data is used to identify potentially active and selective materials for both catalysts. Co-porphyrin is recommended for the first step, formation of hydrogen peroxide, and three different metal oxides - SrTiO3(100), CaTiO3(100) and WO3(100) - are suggested for the subsequent reduction step.
RESUMEN
Molecular level understanding of acid-catalysed conversion of sugar molecules to platform chemicals such as hydroxy-methyl furfural (HMF), furfuryl alcohol (FAL), and levulinic acid (LA) is essential for efficient biomass conversion. In this paper, the high-level G4MP2 method along with the SMD solvation model is employed to understand detailed reaction energetics of the acid-catalysed decomposition of glucose and fructose to HMF. Based on protonation free energies of various hydroxyl groups of the sugar molecule, the relative reactivity of gluco-pyranose, fructo-pyranose and fructo-furanose are predicted. Calculations suggest that, in addition to the protonated intermediates, a solvent assisted dehydration of one of the fructo-furanosyl intermediates is a competing mechanism, indicating the possibility of multiple reaction pathways for fructose to HMF conversion in aqueous acidic medium. Two reaction pathways were explored to understand the thermodynamics of glucose to HMF; the first one is initiated by the protonation of a C2-OH group and the second one through an enolate intermediate involving acyclic intermediates. Additionally, a pathway is proposed for the formation of furfuryl alcohol from glucose initiated by the protonation of a C2-OH position, which includes a C-C bond cleavage, and the formation of formic acid. The detailed free energy landscapes predicted in this study can be used as benchmarks for further exploring the sugar decomposition reactions, prediction of possible intermediates, and finally designing improved catalysts for biomass conversion chemistry in the future.
Asunto(s)
Fructosa/química , Furaldehído/análogos & derivados , Furanos/química , Glucosa/química , Ácidos/química , Catálisis , Furaldehído/química , Protones , TermodinámicaRESUMEN
The influence of temperature changes in water-based electrolytes on the atomic structure at the electrochemical interface has been studied using in situ surface X-ray scattering (SXS) in combination with cyclic voltammetry. Results are presented for the potential-dependent surface reconstruction of Au(100), the adsorption and ordering of bromide anions on the Au(100) surface, and the adsorption and oxidation of CO on Pt(111) in pure HClO(4) and in the presence of anions. These systems represent a range of structural phenomena, namely metal surface restructuring and ordering transitions in both nonreactive spectator species and reactive adsorbate layers. The key effect of temperature appears to be in controlling the kinetics of the surface reactions that involve oxygenated species, such as hydroxyl adsorption and oxide formation. The results indicate that temperature effects should be considered in the determination of structure-function relationships in many important electrochemical systems.
RESUMEN
Periodic, self-consistent DFT-GGA calculations are used to study the thermochemical properties of both surface and subsurface atomic hydrogen on a variety of pure metals and near-surface alloys (NSAs). For surface hydrogen on pure metals, calculated site preferences, adsorption geometries, vibrational frequencies, and binding energies are reported and are found to be in good agreement with available experimental data. On NSAs, defined as alloys wherein a solute is present near the surface of a host metal in a composition different from the bulk composition, surface hydrogen generally binds more weakly than it binds to the pure-metal components composing the alloys. Some of the NSAs even possess the unusual property of binding hydrogen as weakly as the noble metals while, at the same time, dissociating H(2) much more easily. On both NSAs and pure metals, formation of surface hydrogen is generally exothermic with respect to H(2)(g). In contrast, formation of subsurface hydrogen is typically endothermic with respect to gas-phase H(2) (the only exception to this general statement is found for pure Pd). As with surface H, subsurface H typically binds more weakly to NSAs than to the corresponding pure-metal components of the alloys. The diffusion barrier for hydrogen from surface to subsurface sites, however, is usually lower on NSAs compared to the pure-metal components, suggesting that population of subsurface sites may occur more rapidly on NSAs.
Asunto(s)
Química Física/métodos , Hidrógeno/química , Elementos de Transición , Adsorción , Aleaciones , Catálisis , Difusión , Electrones , Plomo/química , Metales/química , Modelos Teóricos , Presión , Propiedades de SuperficieRESUMEN
We present calculated adsorption energies of oxygen on gold and platinum clusters with up to 923 atoms (3 nm diameter) using density functional theory. We find that surface tension of the clusters induces a compression, which weakens the bonding of adsorbates compared with the bonding on extended surfaces. The effect is largest for close-packed surfaces and almost nonexistent on the more reactive steps and edges. The effect is largest at low coverage and decreases, even changing sign, at higher coverages where the strain changes from compressive to tensile. Quantum size effects also influence adsorption energies but only below a critical size of 1.5 nm for platinum and 2.5 nm for gold. We develop a model to describe the strain-induced size effects on adsorption energies, which is able to describe the influence of surface structure, adsorbate, metal, and coverage.
RESUMEN
In this paper, we use density functional theory (DFT) calculations on highly parallel computing resources to study size-dependent changes in the chemical and electronic properties of platinum (Pt) for a number of fixed freestanding clusters ranging from 13 to 1415 atoms, or 0.7-3.5 nm in diameter. We find that the surface catalytic properties of the clusters converge to the single crystal limit for clusters with as few as 147 atoms (1.6 nm). Recently published results for gold (Au) clusters showed analogous convergence with size. However, this convergence happened at larger sizes, because the Au d-states do not contribute to the density of states around the Fermi-level, and the observed level fluctuations were not significantly damped until the cluster reached ca. 560 atoms (2.7 nm) in size.
RESUMEN
Improving the efficiency of electrocatalytic reduction of oxygen represents one of the main challenges for the development of renewable energy technologies. Here, we report the systematic evaluation of Pt-ternary alloys (Pt3(MN)1 with M, N = Fe, Co, or Ni) as electrocatalysts for the oxygen reduction reaction (ORR). We first studied the ternary systems on extended surfaces of polycrystalline thin films to establish the trend of electrocatalytic activities and then applied this knowledge to synthesize ternary alloy nanocatalysts by a solvothermal approach. This study demonstrates that the ternary alloy catalysts can be compelling systems for further advancement of ORR electrocatalysis, reaching higher catalytic activities than bimetallic Pt alloys and improvement factors of up to 4 versus monometallic Pt.
RESUMEN
Electrocatalysis will play a key role in future energy conversion and storage technologies, such as water electrolysers, fuel cells and metal-air batteries. Molecular interactions between chemical reactants and the catalytic surface control the activity and efficiency, and hence need to be optimized; however, generalized experimental strategies to do so are scarce. Here we show how lattice strain can be used experimentally to tune the catalytic activity of dealloyed bimetallic nanoparticles for the oxygen-reduction reaction, a key barrier to the application of fuel cells and metal-air batteries. We demonstrate the core-shell structure of the catalyst and clarify the mechanistic origin of its activity. The platinum-rich shell exhibits compressive strain, which results in a shift of the electronic band structure of platinum and weakening chemisorption of oxygenated species. We combine synthesis, measurements and an understanding of strain from theory to generate a reactivity-strain relationship that provides guidelines for tuning electrocatalytic activity.
Asunto(s)
Cobre/química , Electroquímica , Nanopartículas del Metal/química , Oxígeno/química , Platino (Metal)/química , Catálisis , Oxígeno/metabolismo , Propiedades de SuperficieRESUMEN
Voltammetric dealloying of bimetallic platinum-copper (Pt-Cu) alloys has been shown to be an effective strategy to modify the surface electrocatalytic reactivity of Pt bimetallic nanoparticles (S. Koh and P. Strasser, J. Am. Chem. Soc., 2007, 129, 12624). Using cyclic voltammetry and structural XRD studies, we systematically characterize the Pt-Cu precursor compounds as well as the early stages of the selective Cu surface dissolution (dealloying) process for Pt(25)Cu(75), Pt(50)Cu(50), and Pt(75)Cu(25) alloy nanoparticles annealed at both low and high temperature. We also assess the impact of the synthesis conditions on the electrocatalytic reactivity for the oxygen reduction reaction (ORR). To gain atomistic insight into the observed voltammetric profiles, we compare our experimental results with periodic DFT calculations of trends in the thermodynamics of surface Cu dissolution potentials from highly stepped and kinked Pt(854) single crystal surfaces. The modeling suggests a dependence of the electrochemical Cu dissolution potentials on the detailed atomic environment (coordination number, nature of coordinating atoms) of the bimetallic Pt-Cu surfaces. The DFT-predicted shifts in electrochemical Cu dissolution potentials are shown to qualitatively account for the observed voltammetric profiles during Cu dealloying. Our study suggests that metal-specific energetics have to be taken into account to explain the detailed dealloying behavior of bimetallic surfaces.
Asunto(s)
Aleaciones/química , Cobre/química , Nanopartículas del Metal/química , Modelos Químicos , Platino (Metal)/química , Catálisis , Simulación por Computador , Electroquímica , Electrodos , Modelos Moleculares , Oxidación-Reducción , Oxígeno/química , Propiedades de Superficie , Termodinámica , Difracción de Rayos XRESUMEN
We present results of density functional theory calculations on a Pt(111) slab with a bilayer of water, solvated protons in the water layer, and excess electrons in the metal surface. In this way we model the electrochemical double layer at a platinum electrode. By varying the number of protons/electrons in the double layer we investigate the system as a function of the electrode potential. We study the elementary processes involved in the hydrogen evolution reaction, 2(H(+) + e(-)) --> H(2), and determine the activation energy and predominant reaction mechanism as a function of electrode potential. We confirm by explicit calculations the notion that the variation of the activation barrier with potential can be viewed as a manifestation of the Brønsted-Evans-Polanyi-type relationship between activation energy and reaction energy found throughout surface chemistry.
Asunto(s)
Algoritmos , Hidrógeno/química , Modelos Teóricos , Platino (Metal)/química , Protones , Cationes , Electroquímica , Electrodos , Solventes/química , Termodinámica , Agua/químicaRESUMEN
The pace of materials discovery for heterogeneous catalysts and electrocatalysts could, in principle, be accelerated by the development of efficient computational screening methods. This would require an integrated approach, where the catalytic activity and stability of new materials are evaluated and where predictions are benchmarked by careful synthesis and experimental tests. In this contribution, we present a density functional theory-based, high-throughput screening scheme that successfully uses these strategies to identify a new electrocatalyst for the hydrogen evolution reaction (HER). The activity of over 700 binary surface alloys is evaluated theoretically; the stability of each alloy in electrochemical environments is also estimated. BiPt is found to have a predicted activity comparable to, or even better than, pure Pt, the archetypical HER catalyst. This alloy is synthesized and tested experimentally and shows improved HER performance compared with pure Pt, in agreement with the computational screening results.
RESUMEN
Periodic, self-consistent, density functional theory calculations have been performed to demonstrate that subsurface oxygen (O(sb)) dramatically increases the reactivity of the Ag(111) surface. O(sb) greatly facilitates the dissociation of H2, O2, and NO and enhances the binding of H, C, N, O, O2, CO, NO, C2H2, and C2H4 on the Ag(111) surface. This effect originates from an O(sb)-induced upshift of the d-band center of the Ag surface and becomes more pronounced at higher O(sb) coverage. Our findings point to the important role that near-surface impurities, such as O(sb), can play in determining the thermochemistry and kinetics of elementary steps catalyzed by transition metal surfaces.
Asunto(s)
Oxígeno/química , Plata/química , Adsorción , Cristalografía por Rayos X , Modelos Químicos , Modelos Moleculares , Propiedades de SuperficieRESUMEN
A periodic, self-consistent, Density Functional Theory study of methanol decomposition on Pt(111) is presented. The thermochemistry and activation energy barriers for all the elementary steps, starting with O[bond]H scission and proceeding via sequential hydrogen abstraction from the resulting methoxy intermediate, are presented here. The minimum energy path is represented by a one-dimensional potential energy surface connecting methanol with its final decomposition products, CO and hydrogen gas. It is found that the rate-limiting step for this decomposition pathway is the abstraction of hydroxyl hydrogen from methanol. CO is clearly identified as a strong thermodynamic sink in the reaction pathway while the methoxy, formaldehyde, and formyl intermediates are found to have low barriers to decomposition, leading to very short lifetimes for these intermediates. Stable intermediates and transition states are found to obey gas-phase coordination and bond order rules on the Pt(111) surface.
RESUMEN
The rational design of pure and alloy metal catalysts from fundamental principles has the potential to yield catalysts of greatly improved activity and selectivity. A promising area of research concerns the role that near-surface alloys (NSAs) can play in endowing surfaces with novel catalytic properties. NSAs are defined as alloys wherein a solute metal is present near the surface of a host metal in concentrations different from the bulk; here we use density functional theory calculations to introduce a new class of these alloys that can yield superior catalytic behaviour for hydrogen-related reactions. Some of these NSAs bind atomic hydrogen (H) as weakly as the noble metals (Cu, Au) while, at the same time, dissociating H(2) much more easily. This unique set of properties may permit these alloys to serve as low-temperature, highly selective catalysts for pharmaceuticals production and as robust fuel-cell anodes.
Asunto(s)
Aleaciones/química , Catálisis , Microscopía Electrónica/métodos , NanotecnologíaRESUMEN
Periodic, self-consistent, Density Functional Theory (PW91-GGA) calculations are used to study competitive paths for the decomposition of methanol on Pt(111). Pathways proceeding through initial C-H and C-O bond scission events in methanol are considered, and the results are compared to data for a pathway proceeding through an initial O-H scission event [Greeley et al. J. Am. Chem. Soc. 2002, 124, 7193]. The DFT results suggest that methanol decomposition via CH(2)OH and either formaldehyde or HCOH intermediates is an energetically feasible pathway; O-H scission to CH(3)O, followed by sequential dehydrogenation, may be another realistic route. Microkinetic modeling based on the first-principles results shows that, under realistic reaction conditions, C-H scission in methanol is the initial decomposition step with the highest net rate. The elementary steps of all reaction pathways (with the exception of C-O scission) follow a linear correlation between the transition state and final state energies. Simulated HREELS spectra of the intermediates show good agreement with available experimental data, and HREELS spectra of experimentally elusive reaction intermediates are predicted.