Clinical pilot study for EPID-based in vivo dosimetry using EPIgray™ for head and neck VMAT.

This work details the clinical pilot study methodology used at Wellington Blood and Cancer Centre (WBCC) before the clinical release of in vivo dosimetry (IVD) system EPIgray™ for head and neck (H&N) volumetric modulated arc therapy (VMAT) treatments. Clinical pilot studies make it possible to select appropriate, department-specific tolerance ranges for the treatment type and site under investigation. An IVD clinical pilot study of H&N VMAT treatments was conducted over 3 months at WBCC using EPIgray™ dose reconstruction software and included 12 patients and 32 individual treatment fractions. Statistical analysis of the dose deviations between the treatment planning system (TPS) dose and EPIgray™ reconstructed dose confirmed that a deviation tolerance range of ± 7.0% was an appropriate choice for H&N VMAT at WBCC.

Report of the ACPSEM radiation oncology medical physics workforce modelling project task group.

The ACPSEM radiation oncology medical physics workforce modelling project task group was formed to acquire a snapshot of practices in Australia and New Zealand and to develop an activity-based workforce model. To achieve this, two surveys were carried out, capturing the work practices of 98 radiation oncology departments and 182 college members. The member survey provided a snapshot of the current workforce: their demographics, work conditions, professional recognition, and future plans. The facility survey provided an Australian and New Zealand contextualisation of the volume-based activities defined in the International Atomic Energy Agency activity-based radiation oncology staffing model at a granular level. An ACPSEM ROMP workforce model was developed to be a modelling tool applicable at both the facility and sector levels.

Relapse patterns after low-dose-rate prostate brachytherapy.

PURPOSE: When biochemical failure (BF) develops after low-dose-rate prostate brachytherapy, the relapse site is frequently not found. We set out to find whether prostate-specific membrane antigen positron emission tomography -CT (PSMA PET-CT) scanning has improved knowledge of relapse patterns. METHODS AND MATERIALS: A database was analyzed, which contained information and long-term followup on 903 men who had an iodine-125 seed implant as monotherapy for early-stage prostate cancer. There was a total of 68 BFs. RESULT: In 38 men developing BF before PSMA PET-CT scanning was available, the site of relapse was local in six, distant in twelve, and unknown in twenty. In 30 men developing BF more recently who had a PSMA PET-CT scan, the relapse site was demonstrated in all cases, and 19 (63%) men had relapsed at the prostate base. Radiation dosimetry of base relapses and paired controls demonstrated that implants routinely delivered a lower radiation dose to the base than to the rest of the prostate. Eight of seventeen cases found to have prostate relapse only underwent salvage prostatectomy. CONCLUSION: PSMA PET-CT scanning is highly effective in demonstrating the relapse site(s) when BF develops after low-dose-rate prostate brachytherapy. Knowledge of the relapse site increases management options for men developing BF.

A prospective audit of the 10-year outcomes from low dose-rate brachytherapy for early stage prostate cancer.

AIM: New Zealand men diagnosed with early stage prostate cancer need to know what outcomes to expect from management options. METHODS: Between 2001 and 2016, 951 men were treated with low dose-rate brachytherapy (permanent iodine-125 seed implantation) by the Wellington Prostate Brachytherapy Group based at Southern Cross Hospital, Wellington. At follow up after treatment, men had their PSA measured and were scored for urinary, bowel and sexual side effects. RESULTS: Median follow-up of men was 7.9 years (range 2.0-16.3 years). Ten-year PSA control was 95% for the 551 men with low-risk prostate cancer and 82% for the 400 men with intermediate-risk prostate cancer. Adverse effects were generally minor and short-term only. Temporary urinary obstruction developed soon after the implant in 2.6% men, and the 10-year cumulative risk of urethral stricture was 2.6%. Erectile dysfunction developed in 29% men, two-thirds of whom had a good response to a PDE5 inhibitor. Most men returned to a normal routine within four days of the implant. CONCLUSION: LDR brachytherapy is a highly effective low-impact treatment option for New Zealand men with early stage prostate cancer.

The validity of Acuros BV and TG-43 for high-dose-rate brachytherapy superficial mold treatments.

PURPOSE: The purpose of this work is to validate the Acuros BV dose calculation algorithm for high-dose-rate (HDR) brachytherapy superficial mold treatments in the absence of full scatter conditions and compare this with TG-43 dose calculations. We also investigate the impact of additional back scatter material (bolus) applied above surface molds to the dose distributions under the mold. METHODS AND MATERIALS: The absorbed dose at various depths was compared for simulations performed using either TG-43 or Acuros BV dose calculations. Parameter variations included treatment area, thickness of the bolus, and surface shape (flat or spherical). Film measurements were carried out in a flat phantom. RESULTS: Acuros BV calculations and film measurements agreed within 1.5% but were up to 15% lower than TG-43 dose calculations when no bolus was applied above the treatment catheters. The difference in dose at the prescription depth (1 cm below the central catheter) increased with increasing treatment area: 3.3% difference for a 3 × 3.5 cm2 source loading area, 7.4% for 8 × 9 cm2, and 13.4% for 18 × 19 cm2. The dose overestimation of the TG-43 model decreased when bolus was added above the treatment catheters. CONCLUSIONS: The TG-43 dosimetry formalism cannot model surface mold treatments in the absence of full scatter conditions within 5% for loading areas larger than approximately 5 × 5 cm2. The TG-43 model results in an overestimation of the delivered dose, which increases with treatment area. This confirms the need for model-based dose calculation algorithms as discussed in TG-186.

Time-resolved dosimetry using a pinpoint ionization chamber as quality assurance for IMRT and VMAT.

PURPOSE: To develop a method to verify the dose delivery in relation to the individual control points of intensity modulated radiotherapy (IMRT) and volumetric modulated arc therapy (VMAT) using an ionization chamber. In addition to more effective problem solving during patient-specific quality assurance (QA), the aim is to eventually map out the limitations in the treatment chain and enable a targeted improvement of the treatment technique in an efficient way. METHODS: Pretreatment verification was carried out for 255 treatment plans that included a broad range of treatment indications in two departments using the equipment of different vendors. In-house developed software was used to enable calculation of the dose delivery for the individual beamlets in the treatment planning system (TPS), for data acquisition, and for analysis of the data. The observed deviations were related to various delivery and measurement parameters such as gantry angle, field size, and the position of the detector with respect to the field edge to distinguish between error sources. RESULTS: The average deviation of the integral fraction dose during pretreatment verification of the planning target volume dose was -2.1% ± 2.2% (1 SD), -1.7% ± 1.7% (1 SD), and 0.0% ± 1.3% (1 SD) for IMRT at the Radboud University Medical Center (RUMC), VMAT (RUMC), and VMAT at the Wellington Blood and Cancer Centre, respectively. Verification of the dose to organs at risk gave very similar results but was generally subject to a larger measurement uncertainty due to the position of the detector at a high dose gradient. The observed deviations could be related to limitations of the TPS beam models, attenuation of the treatment couch, as well as measurement errors. The apparent systematic error of about -2% in the average deviation of the integral fraction dose in the RUMC results could be explained by the limitations of the TPS beam model in the calculation of the beam penumbra. CONCLUSIONS: This study showed that time-resolved dosimetry using an ionization chamber is feasible and can be largely automated which limits the required additional time compared to integrated dose measurements. It provides a unique QA method which enables identification and quantification of the contribution of various error sources during IMRT and VMAT delivery.

Validation of Varian's SmartAdapt® deformable image registration algorithm for clinical application.

BACKGROUND: Re-contouring of structures on consecutive planning computed tomography (CT) images for patients that exhibit anatomical changes is elaborate and may negatively impact the turn-around time if this is required for many patients. This study was therefore initiated to validate the accuracy and usefulness of automatic contour propagation for head and neck cancer patients using SmartAdapt® which is the deformable image registration (DIR) application in Varian's Eclipse™ treatment planning system. METHODS: CT images of eight head and neck cancer patients with multiple planning CTs were registered using SmartAdapt®. The contoured structures of target volumes and OARs of the primary planning CT were deformed accordingly and subsequently compared with a reference structure set being either: 1) a structure set independently contoured by the treating Radiation Oncologist (RO), or 2) the DIR-generated structure set after being reviewed and modified by the RO. RESULTS: Application of DIR offered a considerable time saving for ROs in delineation of structures on CTs that were acquired mid-treatment. Quantitative analysis showed that 84% of the volume of the DIR-generated structures overlapped with the independently re-contoured structures, while 94% of the volume overlapped with the DIR-generated structures after review by the RO. This apparent intra-observer variation was further investigated resulting in the identification of several causes. Qualitative analysis showed that 92% of the DIR-generated structures either need no or only minor modification during RO reviews. CONCLUSIONS: SmartAdapt is a powerful tool with sufficient accuracy that saves considerable time in re-contouring structures on re-CTs. However, careful review of the DIR-generated structures is mandatory, in particular in areas where tumour regression plays a role.

Patterns of failure after iodine-125 seed implantation for prostate cancer.

PURPOSE: To determine the site of relapse when biochemical failure (BF) occurs after iodine-125 seed implantation for prostate cancer. MATERIALS AND METHODS: From 2001-2009, 500 men underwent implantation in Wellington, New Zealand. Men who sustained BF were placed on relapse guidelines that delayed restaging and intervention until the prostate-specific antigen (PSA) was ⩾20 ng/mL. RESULTS: Most implants (86%) had a prostate D90 of ⩾90%, and multivariate analysis showed that this parameter was not a variable that affected the risk of BF. Of 21 BFs that occurred, the site of failure was discovered to be local in one case and distant in nine cases. Restaging failed to identify the site of relapse in two cases. In nine cases the trigger for restaging had not been reached. CONCLUSIONS: If post-implant dosimetry is generally within the optimal range, distant rather than local failure appears to be the main cause of BF. Hormone treatment is therefore the most commonly indicated secondary treatment intervention (STI). Delaying the start of STI prevents the unnecessary treatment of men who undergo PSA 'bounce' and have PSA dynamics initially mimicking those of BF.