Construction of phase-separated Co/MnO synergistic catalysts and integration onto sponge for rapid removal of multiple contaminants.

Wastewater treatment recycling is critical to ensure safe water supply or to overcome water shortage. Herein, we developed metallic Co integration onto MnO nanorods (MON) resulting in a phase-separated synergetic catalyst by creating more Mn(III) via the Jahn-Teller effect and oxygen vacancies and improving the redox capability of Co nanoparticles mediated by a thin carbon layer. Additionally, the N-doped surface carbon network on MON contributes to polar sites, facilitating the enrichment of contaminants around reactive sites, thereby shortening the migration of reactive oxidative species (ROS) toward contaminants. The optimized MnO@Co/C-600 exhibits superior PMS activation efficiency for bisphenol A degradation (0.463 min-1), displaying nearly a 20-fold enhancement in the rate constant compared to Mn3O4/C-600. Subsequent experiments involving variable modulation and extension were conducted to further elucidate the multiple synergistic effects. The mechanism study further confirms the synergy of ˙SO4-, ˙OH, ˙O2-, and 1O2, along with additional electron transfer pathways. The intermediates generated during degradation pathways and their toxicity to aquatic organisms were identified. Notably, a monolith integrated catalyst was explored by anchoring MnO@Co/C-600 onto a tailored melamine sponge based on Ca ion triggered crosslink tactic for the photothermal degradation of bisphenol A, tetracycline and norfloxacin, endowed with easy recovery and good stability. Furthermore, we demonstrated that the total organic carbon removal of multiple contaminants surpassed that of sole contaminants.

A CuCo Bimetal Confined Hollow SiC Hybrid Photothermal Nanoreactor for the Integration of Pollutant Mineralization and Solar-Powered Water Evaporation.

Growing attention has been paid to the rational treatment of antibiotics-bearing medical wastewater. However, the complexity of polluted wastewater makes the later comprehensive treatment difficult only by the Advanced Oxidation Process technique. Therefore, the coupled water treatment techniques including contaminant mineralization and regeneration of cleanwater become very attractive. A bimetallic functional hollow nanoreactor defined as (Co@SiO2/Cu-X) was successfully constructed by coating a Cu-doped silica layer on the metal-organic framework (ZIF-67) followed by programmed calcination in nitrogen. The nanoreactor was endowed with a hollow configuration composed of mesoporous N-doping C-Silica hybrid shell encapsulated ultrafine Cu and Co metallic species. Such a configuration allows for the efficient diffusion and open reaction space of big contaminant molecules. The catalytic synergy of exposed Co-Cu bimetals and the easy accessibility of electron-rich contaminants by polar N doping sites triggered surface affinity make the optimal Co@SiO2/Cu-6 afford an excellent catalytic norfloxacin mineralization activity (7 min, kabs=0.744 min-1) compared to Cu-free Co@SiO2-6 (kabs=0.493 min-1) and Co-6 (kabs=0.378 min-1) Benefiting from the above unique advantages, Co@SiO2/Cu-6 show excellent removal performance in degrading different pollutants (carbamazepine, oxytetracycline, tetracycline, and bisphenol A) and persistent recycled stability in removing NFX. In addition, by virtue of the excellent photothermal properties, interfacial solar water evaporation application by Co@SiO2/Cu-6 was further explored to reach the regeneration of cleanwater (1.595 kg m-2 h-1, 97.51 %). The integration of pollutant mineralization and solar water evaporation by creating the monolith evaporation by anchoring the Co@SiO2/Cu-6 onto the tailored melamine sponge allows the regeneration of cleanwater (1.6 kg⋅m-2⋅h-1) and synchronous pollutant removal (NFX, 95 %, 60 min), which provides potential possibility the treatment of complicated wastewater.

Enabling Efficient Aerobic 5-Hydroxymethylfurfural Oxidation to 2,5-Furandicarboxylic Acid in Water by Interfacial Engineering Reinforced Cu-Mn Oxides Hollow Nanofiber.

Herein, a one-dimensional hollow nanofiber catalyst composed of tightly packed multiphase metal oxides of Mn2 O3 and Cu1.4 Mn1.6 O4 was constructed by electrospinning and tailored thermal treatment procedure. The characterization results comprehensively confirmed the special morphology and composition of various comparative catalysts. This strategy endowed the catalyst with abundant interfacial characteristics of components Mn2 O3 and Cu1.4 Mn1.6 O4 nanocrystal. Impressively, the tuning thermal treatment resulted in tailored CuI sites and surface oxygen species of the catalyst, thus affording optimized oxygen vacancies for reinforced oxygen adsorption, while the concomitant enhanced lattice oxygen activity in the constructed composite catalyst ensured the higher catalytic oxidation ability. More importantly, the regulated proportion of oxygen vacancy and lattice oxygen in the composite catalyst was obtained in the best catalyst, beneficial to accelerate the reaction cycle. Compared to other counterparts obtained by different temperatures, the CMO-500 sample exhibited superior selective aerobic 5-hydroxymethylfurfural (HMF) oxidation to 2,5-furandicarboxylic acid (FDCA, 96 % yield) in alkali-bearing aqueous solution using O2 at 120 °C, which resulted from the above-mentioned composition optimization and interfacial engineering reinforced surface oxygen consumption and regeneration cycle. The reaction mechanism was further proposed to uncover the lattice oxygen and oxygen vacancy participating HMF conversion process.

Natural DNA-assisted RuP2 on highly graphitic N,P-codoped carbon for pH-wide hydrogen evolution.

Natural DNA was employed for the first time as a phosphorization agent and carbon source to controllably synthesize a RuP2/N,P-codoped carbon composite by a simple "mix-and-pyrolyze" strategy, which displays higher activity for alkaline and acidic HER and neutral activity compared to Pt/C together with outstanding durability.

Hydroxyl-Exchanged Nanoporous Ionic Copolymer toward Low-Temperature Cycloaddition of Atmospheric Carbon Dioxide into Carbonates.

An ionic copolymer catalyst with nanopores, large surface area, high ionic density, and superior basicity was prepared via the radical copolymerization of amino-functionalized ionic liquid bromide and divinylbenzene, followed with a hydroxyl exchange for removing bromonium. Evaluated in chemical fixation of CO2 with epoxides into cyclic carbonates in the absence of any solvent and basic additive, the nanoporous copolymer catalyst showed high and stable activity, superior to various control catalysts including the halogen-containing analogue. Further, high yields were obtained over a wide scope of substrates including aliphatic long carbon-chain alkyl epoxides and internal epoxide, even under atmospheric pressure and less than 100 °C for the majority of the substrates. On the basis of in situ Fourier transform infrared (FT-IR) investigation and density functional theory (DFT) calculation for the reaction intermediates, we proposed a possible reaction mechanism accounting for the superior catalytic activity of the ionic copolymer. The specifically prepared ionic copolymer material of this work features highly stable, noncorrosive, and sustainable catalysis and, thus, may be a new possibility for efficient chemical fixation of CO2 since it is an environmentally friendly, metal-free solid catalyst.

Heterogeneous conversion of CO2 into cyclic carbonates at ambient pressure catalyzed by ionothermal-derived meso-macroporous hierarchical poly(ionic liquid)s.

Meso-macroporous hierarchical poly(ionic liquid)s (MPILs) with extremely high ionic site densities and tunable pore structures were ionothermally synthesized through the free radical self-polymerization of our newly designed rigid bis-vinylimidazolium salt monomer. The synthesis avoided the use of any templates, gave a high yield (>99%) and allowed recycling of the IL solvent; thus it is facile, atom-efficient, environmentally friendly and sustainable. The synthesized MPILs possessed distinctive features of polycation matrices, abundant halogen anions, and large surface areas. They not only presented enhanced CO2 capture, but led to breakthroughs in the heterogeneous catalytic conversion of CO2 into cyclic carbonates: (1) unprecedented high activity at atmospheric pressure and low temperature; (2) good substrate compatibility, even being active towards the extremely inert aliphatic long carbon-chain alkyl epoxides. This result renders the first occasion of a metal-solvent-additive free recyclable heterogeneous cycloaddition of CO2 at such mild conditions.