RESUMEN
We describe the behavior of optical trajectories in multipass rotationally asymmetric cavities (RACs) using a phase-space motivated approach. Emphasis is placed on generating long optical paths. A trajectory with an optical path length of 18 m is generated within a 68 cm3 volume. This path length to volume ratio (26.6 cm-2) is large compared to current state of the art multipass cells such as the cylindrical multipass cell (6.6 cm-2) and astigmatic Herriott cell (9 cm-2). Additionally, the effect of small changes to the input conditions on the path length is studied and compared to the astigmatic Herriott cell. This work simplifies the process of designing RACs with long optical path lengths and could lead to broader implementation of these multipass cells.
RESUMEN
The low-temperature growth of materials that support high-performance devices is crucial for advanced semiconductor technologies such as integrated circuits built using monolithic three-dimensional (3D) integration and flexible electronics. However, low growth temperature prohibits sufficient atomic diffusion and directly leads to poor material quality, imposing severe challenges that limit device performance. Here, we demonstrate superior quality growth of 3D semiconductors at growth temperatures reduced by >200 °C by using two-dimensional (2D) materials as intermediate layers to optimize the potential energy barrier for adatom diffusion. We reveal the benefits of maintaining, but reducing, the potential field through the 2D layer, which coupled with the inert surface of the 2D material lowers the kinetic barriers, enabling long-distance atomic diffusion and enhanced material quality at lower growth temperatures. As model systems, GaN and ZnSe, grown using WSe2 and graphene intermediate layers, exhibit larger grains, preferred orientation, reduced strain, and improved carrier mobility, all at temperatures lower by >200 °C compared to direct growth as characterized by diffraction, X-ray photoelectron spectroscopy, Raman, and Hall measurements. The realization of high-performance materials using 2D intermediate layers can enable transformative technologies under thermal budget restrictions, and the 2D/3D heterostructures could enable promising heterostructures for future device designs.