Application of hot-stage microscopy direct analysis in real time mass spectrometry (HDM) to the analysis of polymers.

RATIONALE: Polymers are ubiquitous, and characterisation of their chemical, thermal and mechanical properties is important in many applications. Hot-stage microscopy Direct Analysis in Real Time mass spectrometry (HDM) is a new technique which combines optical measurements with the benefits of ambient ionisation mass spectrometry. Physical and chemical information can be obtained as a function of sample temperature, in real time. METHODS: Samples were placed on a miniaturised hot-stage between a custom-made Direct Analysis in Real Time (DART) source and the inlet of an ion trap mass spectrometer, and subjected to both linear and cycled temperature programmes. Optical images were collected using a digital microscope and mass spectra (positive and negative ion) were recorded simultaneously. RESULTS: Mass spectra and optical images were used to monitor the thermal expansion and release of volatile oligomers from both medical and domestic grades of silicone. Series of ions separated by 74 m/z units were observed, consistent with the SiOMe2 monomer; the median mass of these increased with increasing temperature up to the decomposition point (340-400°C). The abundance of volatile material produced decreased with repeated thermal cycling. The coefficients of thermal expansion were calculated from optical data and were in agreement with conventional measurements (2.7-3.6 × 10-4 °C-1 ). Two samples of beach sand analysed for the presence of microplastics were found to contain polyethylene and polystyrene, respectively. CONCLUSIONS: Results indicate that the novel technique of HDM can be successfully applied to the characterisation of a wide range of polymers including those in complex matrices.

An Integrated Hot-Stage Microscope-Direct Analysis in Real Time-Mass Spectrometry System for Studying the Thermal Behavior of Materials.

This paper describes a new analytical instrument that combines a precisely temperature-controlled hot-stage with digital microscopy and Direct Analysis in Real Time-mass spectrometry (DART-MS) detection. The novelty of the instrument lies in its ability to monitor processes as a function of temperature through the simultaneous recording of images, quantitative color changes, and mass spectra. The capability of the instrument was demonstrated through successful application to four very varied systems including profiling an organic reaction, decomposition of silicone polymers, and the desorption of rhodamine B from an alumina surface. The multidimensional, real-time analytical data provided by this instrument allow for a much greater insight into thermal processes than could be achieved previously.

Parameters affecting ion intensities in transmission-mode direct analysis in real-time mass spectrometry.

A survey of the effect of temperature, transmission module material and analysis time on ion intensities in transmission mode direct analysis in real time mass spectrometry is presented. Ion intensity profiles obtained for two related compounds are similar when analysed separately but are very different when analysed as a mixture.

Formation of a dimer of trinuclear helicates which encapsulates an array of six hydrogen-bonded anions.

The amine-containing ligand L, composed of two bidentate pyridyl-thiazole moieties linked by a 1,3-diaminophenylene unit, reacts with copper(II) ions to form a dinuclear double helicate [Cu2 L2 ](4+) . Reaction of [Cu2 L2 ](4+) with dihydrogen phosphate (0.5 equivalents) gives the unsaturated dinuclear double helicate [Cu2 L2 (OPO3 H2 )](3+) . [Cu2 L2 (OPO3 H2 )](3+) further reacts with another 0.5 equivalents of dihydrogen phosphate to give a trinuclear circular helicate which then self-assembles into a hexameric cluster [{Cu3 L3 (OPO3 H2 )3 }](26+) .

Tri-carbonyl-chlorido-(6',7'-di-hydro-5'H-spiro-[cyclo-pentane-1,6'-dipyrido[3,2-d:2',3'-f][1,3]diazepine]-κ(2) N (1),N (11))rhenium(I).

In the title compound, [ReCl(C15H16N4)(CO)3], the Re(I) ion is coordinated in a distorted octa-hedral geometry by one Cl atom, two N atoms of the bidentate ligand and three carbonyl groups. The cyclo-pentane group is orientated in a transoid fashion with respect to the chloride ligand. The dihedral angle between the pryridine rings is 10.91 (12)°. In the crystal, N-H⋯Cl hydrogen bonds link complex mol-ecules, forming a two-dimensional network parallel to (001).

Tri-carbonyl-chlorido-(6',7'-di-hydro-5'H-spiro-[cyclo-hexane-1,6'-dipyrido[3,2-d:2',3'-f][1,3]diazepine]-κ(2) N (1),N (11))rhenium(I).

In the title compound, [ReCl(C16H18N4)(CO)3], the Re(I) ion is coordinated in a distorted octa-hedral geometry by one Cl atom, two N atoms of the bidentate ligand and three carbonyl groups. The cyclo-hexane group is orientated in a transoid fashion with respect to the chloride ligand. In the crystal, N-H⋯Cl hydrogen bonds link complex mol-ecules, forming a two-dimensional network parallel to (100).

Allosteric effects in a ditopic ligand containing bipyridine and tetra-aza-crown donor units.

Artificial allosterism: A ditopic ligand, which contains both bipyridine and tetra-aza-crown binding sites, coordinates one Cu(II) through all four N-donors of the tetradentate aza-crown unit. Reaction at the bipyridine site with another Cu(II) allosterically changes the aza-crown from being a tetradentate to a tridentate N-donor unit, a change in coordination mode that causes the successive binding of two Cu(II) ions to proceed with severe negative cooperativity (see scheme).

Urinary pharmacokinetic methodology to determine the relative lung bioavailability of inhaled beclometasone dipropionate.

AIM: Urinary pharmacokinetic methods have been identified to determine the relative lung and systemic bioavailability after an inhalation. We have extended this methodology to inhaled beclometasone dipropionate (BDP). METHOD: Ethics Committee approval was obtained and all subjects gave consent. Twelve healthy volunteers received randomized doses, separated by >7 days, of 2000 µg BDP solution with (OralC) and without (Oral) 5 g oral charcoal, 10,100 µg inhalations from a Qvar(®) Easibreathe metered dose inhaler (pMDI) with (QvarC) and without (Qvar) oral charcoal and eight 250 µg inhalations from a Clenil(®) pMDI (Clenil). Subjects provided urine samples at 0, 0.5, 1, 2, 3, 5, 8, 12 and 24 h post study dose. Urinary concentrations of BDP and its metabolites, beclometasone-17-monopropionate (17-BMP) and beclometasone (BOH) were measured. RESULTS: No BDP, 17-BMP or BOH were detected in any samples post OralC dosing. Post oral dosing no BDP was detected in all urine samples and no 17-BMP or BOH was excreted in the first 30 min. Significantly more (P < 0.001) BDP, 17-BMP and BOH were excreted in the first 30 min and the cumulative 24 h urinary excretions post Qvar and Clenil compared with Oral. The mean ratio (90% confidence interval) of the 30 min urinary excretions for Qvar compared with Clenil was 231.4 (209.6, 255.7) %. CONCLUSION: The urinary pharmacokinetic methodology to determine the relative lung and systemic bioavailability post inhalation, using 30 min and cumulative 24 h post inhalation samples, applies to BDP. The ratio between Qvar and Clenil is consistent with related clinical and lung deposition studies.

Coordination polymers utilizing N-oxide functionalized host ligands.

Pyridyl functionalized host molecules are oxidized to their N-oxide analogues and form a series of coordination polymers and discrete complexes with transition metal cations. Complex {[Ag(3)(NMP)(6)(L1)(2)]·3(ClO(4))}(∞) where L1 = tris(isonicotinoyl-N-oxide)cyclotriguaiacylene, NMP = N-methylpyrrolidone, is a three-dimensional (3-D) 3,6-connected coordination polymer of pyrite-like (pyr) topology and features ligand unsupported argentophilic interactions, while two-dimensional (2-D) 3,6-connected coordination polymers with the rarely reported kagome dual (kgd) topology are found for [M(L1)(2)](2+) where M = Zn, Cd, Cu. Ligand L2 = tris(nicotinoyl-N-oxide)cyclotriguaiacylene forms a 2-D coordination polymer with 4(4) (sql) grid topology in complexes {[M(L2)(2)(DMF)(2)]·2ClO(4)·8(DMF)}(∞) M = Cd or Cu, DMF = N,N'-dimethylformamide, and a double-linked chain structure in {[Co(L2)(2)(DMF)(2)]·2NO(3)·4(DMF)·H(2)O}(∞), and both types of structure feature hand-shake self-inclusion motifs either within or between the polymers. 2-D coordination networks with 6(3) (hcb) topologies are found in complexes {[M(L3)(NO(3))(2)]·2(DMF)}(∞) (M = Cd, Zn) and {[Cu(5)(L3)(2)Cl(10)(NMP)(4)]}(∞) where L3 = tris(2-pyridylmethyl)cyclotriguaiacylene, while [Ag(2)(L3)(2)(NMP)(4)]·2(BF(4))·2(NMP) has a discrete dimeric structure which again shows hand-shake host-guest interactions supported by π-π stacking.

Ag(I) organometallic coordination polymers and capsule with tris-allyl cyclotriveratrylene derivatives.

Tris-allyl-cyclotriguaiacylene combines with silver salts to give a range of crystalline network structures and one discrete complex. A number of different coordination modes are found within the complexes including η(2)-allyl, aryl, and OR groups binding to Ag(I). AgSbF(6) gives two types of three-dimensional (3-D) coordination polymer with unusual topologies, along with a discrete Ag(2)L(2) capsule dependent on reaction stoichiometry and reaction conditions. Isostructural coordination chain structures are found with AgBF(4) and AgClO(4), while use of Ag(CF(3)SO(3)) gives two-dimensional (2-D) and 3-D coordination polymers through bridging triflate anions.

Tripodal 4-pyridyl-derived host ligands and their metallo-supramolecular chemistry: stella octangula and bowl-shaped assemblies.

The synthesis of five new cyclotriveratrylene derivatives with 4-pyridyl side arms is reported, along with the crystal structures of three of these. Three ligands with extended 4-pyridylphenyl side arms and a ligand derived from cyclotriphenolene have been shown to form [Pd(6)L(8)](12+) stella octangula assemblies using diffusion-ordered spectroscopy NMR and electrospray MS techniques. This confirms the generality of the stella octagula assembly, providing that the ligand arms show a degree of rigidity. The more flexible ether-linked ligand tris(4-pyridylmethyl)cyclotriguaiacylene forms a smaller [Pd(3)L(4)](6+) bowl-shaped assembly in the solid state and in solution. The previously reported ligand tris(4-pyridylmethylamino)cyclotriguaiacylene forms a similar assembly in solution.

Hot-stage microscopy - Direct Analysis in Real-time mass spectrometry (HDM) as a novel tool for monitoring thermally-driven reactions on a small scale.

There is a requirement for reliable real-time analytical tools for reaction monitoring to optimise chemical syntheses. We have developed a new technique which combines thermal analysis, digital microscopy and chemical identification using ambient ionisation mass spectrometry. We term this hot-stage microscopy-Direct Analysis in Real-Time mass spectrometry (HDM). The technique provides optical data as a function of temperature coupled with chemical characterisation of evolved species, including reactants, intermediates and products throughout the course of a reaction. In addition, only a few milligrams of sample are required with analyte detection down to the nanogram range. We demonstrate the benefits of HDM using a series of solvent-free reactions. Our results confirm the suitability of the technique as the reactions studied follow the same pathways as published previously. The accurate temperature control achieved with HDM could also be used to assess the optimum temperature at which thermally-driven reactions can proceed efficiently.

Octapi interactions: self-assembly of a Pd-based [2]catenane driven by eightfold pi interactions.

An unprecedented 2.5 nm array of pi interactions between eight aromatic rings drives the formation of a [2]catenane. Disruption of this array through the use of longer ligands results in the formation of only single, uncatenated rings. The catenated complex is shown to persist in solution alongside its constituent metallomacrocycles.

Heteroligand molecular "stirrups" using conformationally flexible ditopic pyridyl-pyrazolyl ligands.

Heteroligand molecular "stirrups" form by the self-assembly of flexible ditopic ligands in combination with 4,4'-bipyridine and [(dppp)Pd)](2+). Crystallographic analysis shows that the ligands, bis[3-(4-pyridyl)pyrazolyl]-m-xylene (mXy(4py3pz)) and bis[4-(4-pyridyl)pyrazolyl]-p-xylene (pXy(4py4pz)) form complexes of the type [{(dppp)Pd}(2)(4,4'-bipy)(L)].4OTf (1.4OTf and 2.4OTf, respectively) in the solid state, with remarkably similar structures considering the differences in substitution patterns between the two ligands. The self-assembly of both 1(4+) and 2(4+) is assisted by face-to-face pi interactions on the exterior of the macrocycle between the phenyl rings of the dppp ligands and the pyridyl groups of the ditopic ligands.

Octanuclear cubic coordination cages.

Two new bis-bidentate bridging ligands have been prepared, L (naph) and L (anth), which contain two chelating pyrazolyl-pyridine units connected to an aromatic spacer (naphthalene-1,5-diyl and anthracene-9,10-diyl respectively) via methylene connectors. Each of these reacts with transition metal dications having a preference for octahedral coordination geometry to afford {M 8L 12} (16+) cages (for L (anth), M = Cu, Zn; for L (naph), M = Co, Ni, Cd) which have an approximately cubic arrangement of metal ions with a bridging ligand spanning each of the twelve edges, and a large central cavity containing a mixture of anions and/or solvent molecules. The cages based on L (anth) have two cyclic helical {M 4L 4} faces, of opposite chirality, connected by four additional L (anth) ligands as "pillars"; all metal centers have a meridional tris-chelate configuration. In contrast the cages based on L (naph) have (noncrystallographic) S 6 symmetry, with a diagonally opposite pair of corners having a facial tris-chelate configuration with the other six being meridional. An additional significant difference between the two types of structure is that the cubes containing L (anth) do not show significant interligand aromatic stacking interactions. However, in the cages based on L (naph), there are six five-membered stacks of aromatic ligand fragments around the periphery, each based on an alternating array of electron-rich (naphthyl) and electron-deficient (pyrazolyl-pyridine, coordinated to M (2+)) aromatic units. A consequence of this is that the cages {M 8(L (naph)) 12} (16+) retain their structural integrity in polar solvents, in contrast to the cages {M 8(L (anth)) 12} (16+) which dissociate in polar solvents. Consequently, the cages {M 8(L (naph)) 12} (16+) give NMR spectra in agreement with the symmetry observed in the solid state, and their fluorescence spectra (for M = Cd) display (in addition to the normal naphthalene-based pi-pi* fluorescence) a lower-energy exciplex-like emission feature associated with a naphthyl --> pyrazolyl-pyridine charge-transfer excited state arising from the pi-stacking between ligands around the cage periphery.

Mixed-ligand molecular paneling: dodecanuclear cuboctahedral coordination cages based on a combination of edge-bridging and face-capping ligands.

Reaction of a tris-bidentate ligand L(1) (which can cap one triangular face of a metal polyhedron), a bis-bidentate ligand L(2) (which can span one edge of a metal polyhedron), and a range of M(2+) ions (M = Co, Cu, Cd), which all have a preference for six coordination geometry, results in assembly of the mixed-ligand polyhedral cages [M12(mu(3)-L(1))4(mu-L(2))12](24+). When the components are combined in the correct proportions [M(2+):L(1):L(2) = 3:1:3] in MeNO2, this is the sole product. The array of 12 M(2+) cations has a cuboctahedral geometry, containing six square and eight triangular faces around a substantial central cavity; four of the eight M3 triangular faces (every alternate one) are capped by a ligand L(1), with the remaining four M3 faces having a bridging ligand L(2) along each edge in a cyclic helical array. Thus, four homochiral triangular {M3(L(2))3}(6+) helical units are connected by four additional L(1) ligands to give the mixed-ligand cuboctahedral array, a topology which could not be formed in any homoleptic complex of this type but requires the cooperation of two different types of ligand. The complex [Cd3(L(2))3(ClO4)4(MeCN)2(H2O)2](ClO4)2, a trinuclear triple helicate in which two sites at each Cd(II) are occupied by monodentate ligands (solvent or counterions), was also characterized and constitutes an incomplete fragment of the dodecanuclear cage comprising one triangular {M3(L(2))3}(6+) face which has not yet reacted with the ligands L(1). (1)H NMR and electrospray mass spectrometric studies show that the dodecanuclear cages remain intact in solution; the NMR studies show that the Cd 12 cage has four-fold (D2) symmetry, such that there are three independent Cd(II) environments, as confirmed by a (113)Cd NMR spectrum. These mixed-ligand cuboctahedral complexes reveal the potential of using combinations of face-capping and edge-bridging ligands to extend the range of accessible topologies of polyhedral coordination cages.

The dimeric "hand-shake" motif in complexes and metallo-supramolecular assemblies of cyclotriveratrylene-based ligands.

A series of clathrate and metal complexes with cyclotriveratrylene-like molecular host ligands show a similar dimeric homomeric inclusion motif in which a ligand arm of one host is the intra-cavity guest of another and vice versa. This "hand-shake" motif is found in the trinuclear transition metal complex [Cu(3)Cl(6)(1)]CH(3)CN1.5 H(2)O in which 1 is tris(4-[2,2',6',2''-terpyridyl]benzyl)cyclotriguaiacylene; in the self-included M(4)L(4) tetrahedral metallo-supramolecular assembly [Ag(4)(2)(4)] (BF(4))(4) in which 2 is tris-(2-quinolylmethyl)cyclotriguaiacylene; in the 1D coordination chains [Ag(4)]ReO(4) CH(3)CN and [Ag(5)]SbF(6)3 DMFH(2)O in which 4 is tris(1H-imidazol-1-yl)cyclotriguaiacylene and 5 is tris{4-(2-pyridyl)benzyl}cyclotriguaiacylene; and in the acetone clathrate of tris{4-(2-pyridyl)benzyl-amino}cyclotriguaiacylene. Clathrates of ligands 2 and 5 do not show the same dimeric motif, although 2 has an extended homomeric inclusion motif that gives a hexagonal network.

A wavelength and lifetime responsive cryptate-containing fluorescent probe for zinc ions in water.

A diamino-functionalised cryptate can react irreversibly with butanal in water, in the presence of an excess of a metal ion, to form a cyclised bis-aminal complex, which displays metal-dependent luminescence properties.

Metal-specific allosteric activation and deactivation of a diamine.

The reaction of a potentially tetradentate bis(pyridyl-thiazole) ligand with acetone is allosterically activated upon complexation with Cd(II) but deactivated by reaction with Cu(I), demonstrating metal-specific allosteric controlled reactivity.

This facile interconversion of dinuclear double helicates and side-by-side species: a reprogrammable ligand with potential sensor applications.

The ligand L1 forms a dinuclear double helicate with Cu+ but upon addition of Ba2+ to the system a side-by-side species is formed both in solution and in the solid state; in the presence of Na+ both the helicate and the side-by-side species are formed in roughly equal amounts in solution.