Short communication: Effect of cross ventilation with or without evaporative pads on core body temperature and resting time of lactating cows.

A trial was performed to assess the effect of evaporative pads on core body temperature (CBT) and lying behavior of lactating Holstein cows housed in cross-ventilated freestall facilities in a humid environment. This trial was undertaken in 2 barns equipped with (EP) or without (NP) evaporative pads. Each facility had 4 pens, 1 baffle/pen, and a nominal width of 122 m. Stocking density was higher (123.4 vs. 113.1%) and freestalls were slightly shorter (2.3 vs. 2.4 m) and narrower (1.16 vs. 1.21 m) in EP compared with NP barns. In each pen, lying behavior of 20 cows was monitored using electronic data loggers that recorded at 1-min intervals. A subset (n=14) of these cows within each pen were also fitted with temperature loggers attached to blank controlled intravaginal drug release devices to determine CBT every 5 min. Ambient conditions were collected every 15 min. Individual cow lying duration and lying bouts were assessed for each cow, as well as time spent standing and CBT within the following categories: CBT <38.6°C, and CBT >38.6, >38.9, >39.2, >39.4, and >39.7°C. These variables were analyzed using pen as the experimental unit, with cow and day as additional random effects. The average maximum ambient conditions over the 9 d were 25°C and 78.74% relative humidity. No differences were observed in lying duration and number of lying bouts over the 9-d period, with overall means of 696±31 min/d and 12.6±0.5 bouts/d. The EP cows spent 170 min/d longer with a CBT <38.6°C and 107 min/d less with CBT >39.2°C than did NP cows. Cooling with evaporative pads tended to increase time spent lying with a CBT >8.6°C and lying bouts/d for EP cows versus NP cows. Results from this trial show that even under mild heat stress, evaporative cooling in cross-ventilated facilities can decrease CBT and tended to increase lying time.

Invited review: Sustainability of the US dairy industry.

The US dairy industry has realized tremendous improvements in efficiencies and milk production since the 1940s. During this time, farm and total cow numbers have decreased and average herd size has increased. This intensification, combined with the shift to a largely urban public, has resulted in increased scrutiny of the dairy industry by social and environmental movements and increased concern regarding the dairy industry's sustainability. In response to these concerns, a group of scientists specializing in animal welfare, nutrient management, greenhouse gas emissions, animal science, agronomy, agricultural engineering, microbiology, and economics undertook a critical review of the US dairy industry. Although the US dairy system was identified as having significant strengths, the consensus was that the current structure of the industry lacks the resilience to adapt to changing social and environmental landscapes. We identified several factors affecting the sustainability of the US dairy industry, including climate change, rapid scientific and technological innovation, globalization, integration of societal values, and multidisciplinary research initiatives. Specific challenges include the westward migration of milk production in the United States (which is at odds with projected reductions in precipitation and associated limitations in water availability for cattle and crops), and the growing divide between industry practices and public perceptions, resulting in less public trust. Addressing these issues will require improved alignment between industry practices and societal values, based upon leadership from within the industry and sustained engagement with other interested participants, including researchers, consumers, and the general public.

Effects of adjustable and stationary fans with misters on core body temperature and lying behavior of lactating dairy cows in a semiarid climate.

Cows readily seek shade to reduce solar heat load during periods of high ambient temperature. Typically, auxiliary cooling systems are oriented to maximize cooling for shaded cows. However, when a shade structure is oriented north-south, stationary fan and mister cooling systems are unable to track shade as the sun's angle shifts throughout the day, and thus can become ineffective. The FlipFan Dairy Cooling System (Schaefer Ventilation Equipment, Sauk Rapids, MN) employs fans and misters that follow shade and compensate for wind speed by rotating on a horizontal axis. Multiparous, lactating Holstein cows (n=144) on a commercial dairy in Arizona were cooled by a fixed system comprised of stationary fans and misters acting as control or the adjustable FlipFan operated for 16.5 h/d (0830 to 0100 h). Core body temperatures (CBT) of 64 cows (4 pens/treatment; 8 cows/pen; 6d) and lying behavior of 144 cows (4 pens/treatment; 18 cows/pen; 5d) were collected by intravaginal and leg data loggers, respectively. Cows were balanced by milk production, blocked by days in milk, and randomly assigned to pen within block. Pen was the experimental unit. In a second experiment, isothermal maps were developed using a fixed system of thermal data loggers arranged in the shaded areas of the pens at different times of day and were analyzed for differences in the temperature-humidity index (THI) achieved by each cooling treatment. Ambient conditions consisted of a mean temperature of 33.0°C, mean relative humidity of 40.3%, and mean THI of 80.2. Mean 24-h CBT for FlipFan was lower than control (38.9 vs. 39.1±0.04°C). A treatment × time interaction was observed in which CBT of FlipFan was 0.4°C lower than control from 0600 to 0800h and 1500 to 1600h. Cows cooled by FlipFan spent more time lying down compared with those cooled by control (9.5 vs. 8.6 h/d). Cows under FlipFan had more frequent lying bouts than did those under control (12.8 vs. 10.7 bouts/d). Lower CBT and decreased standing time are consistent with the findings of other studies when ambient heat load was reduced. In the second experiment, the FlipFan system achieved a lower THI in the morning and evening (5.9 and 1.7%, respectively), and the THI also tended to be 0.8% lower in the afternoon compared with that of control. Results indicate that FlipFan is more effective than a stationary fan and mister system at decreasing CBT, increasing lying time and bouts, and providing a more desirable microenvironment for cows throughout the day in a semiarid environment.

Effects of monensin on metabolic parameters, feeding behavior, and productivity of transition dairy cows.

The effects of monensin on transition cow metabolism may be dependent on modulation of feeding behavior, rumen pH, and expression of key metabolic genes. Multiparous Holstein cows were used to determine the effects of monensin (400mg/cow daily) on these variables. Cows were randomly assigned, based on calving date, to control or monensin treatments (n = 16 per treatment) 21 d before their expected calving date, and cows remained on treatments through 21 d postpartum. Feeding behavior and water intake data were collected daily. Liver biopsies were conducted after assessing BCS and BW on d -21, -7, 1, 7, and 21 relative to calving for analysis of triglyceride (TG) content as well as mRNA abundance of cytosolic phosphoenolpyruvate carboxykinase, carnitine palmitoyltransferase 1a, and apolipoprotein B. Blood samples were collected 21, 7, and 4 d before expected calving and 1 (day of calving), 4, 7, 14, and 21 d postpartum for nonesterified fatty acid, ß-hydroxybutyrate, glucose, insulin, and haptoglobin analyses. Ruminal pH was collected every 5 min on d 1 through 6 postpartum via a wireless indwelling probe. On d 7 postpartum, a caffeine clearance test was performed to assess liver function. Data were analyzed using mixed models with repeated measures over time. Monensin decreased mean plasma ß-hydroxybutyrate (734 vs. 616 ± 41 µM) and peak concentrations (1,076 vs. 777 ± 70 µM on d 4 postpartum). Monensin also decreased time between meals prepartum (143 vs. 126 ± 5.0 min) and postpartum (88.8 vs. 81.4 ± 2.9 min), which was likely related to a smaller ruminal pH standard deviation in the first day after cows changed to a lactation ration (0.31 vs. 0.26 ± 0.015). Monensin also increased liver mRNA abundance of carnitine palmitoyltransferase 1a (0.10 vs. 0.15 ± 0.002 arbitrary units), which corresponded to a slower rate of liver TG accumulation from d -7 to +7 (412 vs. 128 ± 83 mg of TG/g of protein over this time period). No significant effects of monensin supplementation were observed on milk production, liver cytosolic phosphoenolpyruvate carboxykinase, apolipoprotein B, plasma nonesterified fatty acid, glucose, insulin, or haptoglobin. No effects on disease incidence were detected, but sample size was small for detecting such effects. Overall, results confirm that the effects of monensin on transition cows extend beyond altered propionate flux.

Effect of complementation of cattle cooling systems with feedline soakers on lactating dairy cows in a desert environment.

Two experiments were conducted on a commercial dairy farm in eastern Saudi Arabia to investigate the effects of Korral Kool (KK; Korral Kool Inc., Mesa, AZ) cattle cooling systems complemented with feedline soakers on core body temperature (CBT) of dairy cows. In both experiments, cows had access to KK 24h/d. In the first experiment, 7 primiparous and 6 multiparous lactating Holstein dairy cows were assigned to 1 of 2 pens, which were assigned randomly to treatment sequence over 4 d in a switchback design. Soakers were on (ON24) or off (OFF24) for 24h/d. For the second experiment, 20 multiparous lactating Holstein cows were assigned randomly to 1 of 2 pens, which were assigned randomly to treatment sequence in a switchback design. This experiment lasted 4 d and feedline soakers alternately remained off or were on (ON12) for 12h/d. In experiment 1, average ambient temperature was 30 ± 0.9°C and average relative humidity was 44 ± 14% (mean ± SD). Feedline soakers complementing KK systems for 24 h/d decreased the mean CBT of lactating dairy cows compared with KK systems alone (38.80 vs. 38.98 ± 0.061°C, respectively). A significant treatment by time interaction was found. The greatest treatment effects occurred at 2100 h; treatment means at this time were 39.26 and 38.85 ± 0.085°C for OFF24 and ON24 treatments, respectively. In experiment 2, average ambient temperature was 35 ± 1.5°C and average relative humidity was 33 ± 16%. Feedline soakers running for 12 h/d significantly decreased the mean 24-h CBT from 39.16 to 38.99 ± 0.084°C. Treatment by time interaction was also significant; the greatest treatment effects occurred at 1500 h, when ON12 reduced CBT from 39.38 to 38.81 ± 0.088°C. These results demonstrate that complementing the KK system with feedline soakers decreased the CBT of dairy cows housed in desert environments. However, the combined systems were not sufficient to lower CBT to normal temperatures in this extreme environment.

Effects of running time of a cattle-cooling system on core body temperature of cows on dairy farms in an arid environment.

Two experiments were conducted on a commercial dairy farm to describe the effects of a reduction in Korral Kool (KK; Korral Kool Inc., Mesa, AZ) system operating time on core body temperature (CBT) of primiparous and multiparous cows. In the first experiment, KK systems were operated for 18, 21, or 24 h/d while CBT of 63 multiparous Holstein dairy cows was monitored. All treatments started at 0600 h, and KK systems were turned off at 0000 h and 0300 h for the 18-h and 21-h treatments, respectively. Animals were housed in 9 pens and assigned randomly to treatment sequences in a 3 × 3 Latin square design. In the second experiment, 21 multiparous and 21 primiparous cows were housed in 6 pens and assigned randomly to treatment sequences (KK operated for 21 or 24 h/d) in a switchback design. All treatments started at 0600 h, and KK systems were turned off at 0300 h for the 21-h treatments. In experiment 1, cows in the 24-h treatment had a lower mean CBT than cows in the 18- and 21-h treatments (38.97, 39.08, and 39.03±0.04°C, respectively). The significant treatment by time interaction showed that the greatest treatment effects occurred at 0600 h; treatment means at this time were 39.43, 39.37, and 38.88±0.18°C for 18-, 21-, and 24-h treatments, respectively. These results demonstrate that a reduction in KK system running time of ≥3 h/d will increase CBT. In experiment 2, a significant parity by treatment interaction was found. Multiparous cows on the 24-h treatment had lower mean CBT than cows on the 21-h treatment (39.23 and 39.45±0.17°C, respectively), but treatment had no effect on mean CBT of primiparous cows (39.50 and 39.63±0.20°C for 21- and 24-h treatments, respectively). A significant treatment by time interaction was observed, with the greatest treatment effects occurring at 0500 h; treatment means at this time were 39.57, 39.23, 39.89, and 39.04±0.24°C for 21-h primiparous, 24-h primiparous, 21-h multiparous, and 24-h multiparous cows, respectively. These results demonstrate that multiparous and primiparous cows respond differently when KK system running time decreases from 24 to 21 h. We conclude that in desert climates, the KK system should be operated continuously to decrease heat stress of multiparous dairy cows, but that operating time could be reduced from 24 to 21 h for primiparous cows. Reducing system operation time should be done carefully, however, because CBT was elevated in all treatments.

A comparison of the effects of 2 cattle-cooling systems on dairy cows in a desert environment.

An experiment was conducted to investigate the effects of operation time and size of Korral Kool (KK; Korral Kool Inc., Mesa, AZ) systems on core body temperature (CBT) of dairy cows. Two KK systems were compared: a system with 1.29-m-diameter, 3-hp fans spaced 6 m apart (referred to as small) and a system with 1.52-m-diameter, 5-hp fans spaced 8 m apart (referred to as big). Forty-eight multiparous Holstein cows were assigned randomly to 8 pens (4 big, 4 small), and pens were assigned randomly to a sequence of treatments (KK operated for 21 or 24 h/d) in a switchback design. A complementary calorimetric analysis was developed to investigate the cooling area under the KK units of the big and small systems. Twenty-five sensors distributed equally under the KK units measured ambient temperature at 5-min intervals for 2 h. Average ambient temperature was 35.0±0.6°C and relative humidity was 45±8%. There were significant treatment effects on mean CBT: cows on the small 24-h treatment had a lower mean CBT than cows on the small 21-h treatment (39.22 vs. 39.36±0.14°C), and cows on the big 24-h treatment had a lower mean CBT than cows on the big 21-h treatment (38.95 vs. 39.09±0.13°C). A significant treatment by time interaction was observed. The greatest difference between systems occurred at 0100 h; treatment means at this time were 39.05, 39.01, 39.72, and 39.89±0.16°C for the big 24-h, big 21-h, small 24-h, and small 21-h treatments, respectively. At certain times of day, the big system reduced CBT more than the small system. These results show that CBT of multiparous cows decreased when KK system operational time was increased from 21 to 24 h regardless of the size of the KK cooling system used. The calorimetric analysis showed that even though the big system resulted in lower mean ambient temperatures than the small system, the distance between units in the big system should be decreased to reduce the variation in temperature under the big units.

Bone strength statistical distribution functions for broilers.

Shear and three-point bending tests were conducted on the femur and tibia bones from Hubbard broilers to establish the type of statistical distribution function that best fits bone strength data. In the past it was assumed that these types of data followed a normal distribution. The results of this investigation indicate that a log-normal function best describes the mechanical properties of the tibia and a normal function describes the properties of the femur. Overall the results of the distribution analysis indicate that the mechanical properties of bone tend to follow a log-normal distribution.

Effect of body size and cage profile on the shear strength of bones of caged layers.

The effects of body size and cage profile on the shear strength of bones from caged layers aged 72 weeks were studied. Bones tested included the radius, ulna, humerus, femur, and tibiotarsus. The ultimate shear force of the femur, tibia, and humerus all increased as body size increased (P less than 0.01). The wing bones of birds housed in high profile cages had higher shear breaking loads than birds housed in low profile cages. The ultimate shear stresses of the bones were not affected by body size or cage profile. The radius had the highest shear stress (29.2 MPa), followed in descending order by the ulna (19.1 MPa), tibiotarsus, humerus (11.4 MPa) and femur (11.3 MPa).