RESUMEN
Lignin monomers have attracted attention as functional materials for various industrial uses. However, it is challenging to obtain these monomers by degrading polymerized lignin due to the rigid ether linkage between the aromatic rings. Here, we propose a novel approach based on molecular vibrational excitation using infrared free electron laser (IR-FEL) for the degradation of lignin. The IR-FEL is an accelerator-based pico-second pulse laser, and commercially available powdered lignin was irradiated by the IR-FEL under atmospheric conditions. Synchrotron-radiation infrared microspectroscopy analysis showed that the absorption intensities at 1050 cm-1, 1140 cm-1, and 3400 cm-1 were largely decreased alongside decolorization. Electrospray ionization mass chromatography analysis showed that coumaryl alcohol was more abundant and a mass peak corresponding to hydrated coniferyl alcohol was detected after irradiation at 2.9 µm (νO-H) compared to the original lignin. Interestingly, a mass peak corresponding to vanillic acid appeared after irradiation at 7.1 µm (νC=C and νC-C), which was supported by our two-dimensional nuclear magnetic resonance spectroscopy analysis. Therefore, it seems that partial depolymerization of lignin can be induced by IR-FEL irradiation in a wavelength-dependent manner.
RESUMEN
A coupling device, which can extract coherent edge radiation (CER) from an optical cavity for a free-electron laser (FEL) without damaging the FEL due to diffraction loss, was developed at Nihon University. We successfully observed the CER beam with a power of 1 mW or more in the terahertz range during FEL oscillation. It is revealed that the CER power changed with the detuning of the optical cavity and the dependence of the CER power on the detuning length differs from that of the FEL power. The measured CER spectra indicate that the longitudinal electron distribution in a bunch is modulated by the FEL oscillation with a period corresponding to the FEL slippage length. We herein report the characteristics of the CER with FEL oscillation in detail. These results demonstrate that the CER is excellent tool to reveal the overall effect of FEL interaction on electron distribution in a bunch.
RESUMEN
Thermal effects produced in a laser-irradiated sample were studied by micro-X-ray diffraction and micro-Fourier transform infrared spectroscopy (FTIR). Gypsum, transformed into bassanite at 124 degrees C and into anhydrite at 147 degrees C, was used as a thermal indicator. Pit formation by a wavelength-tunable free electron laser (FEL) irradiation on the gypsum pellet maximized at a wavelength of 3.0 microm, 2 mJ/shot, and pits were not detected in those irradiated at 2.6 or 3.8 microm compared with the maximum at 3.0 microm and diminished at 2.0 or 4.0 microm in the human tooth case. Micro-X-ray diffraction and micro-FTIR did not reveal any appreciable bassanite or anhydrite in the irradiated regions. From the laser ablation viewpoint, these results allow the FEL ablation to be considered as plasma or evaporative ones. This study indicated that the micro-pulse of laser was effective to prevent thermal damages of laser irradiation.