Variation in optimal hemodynamic atrio-ventricular delay of biventricular pacing with different endocardial left ventricular lead locations using precision hemodynamics.

INTRODUCTION: It is not known whether the optimal atrioventricular (AVopt ) delay varies between left ventricular (LV) pacing site during endocardial biventricular pacing (BiVP) and may therefore needs consideration. METHODS: We assessed the hemodynamic AVopt in patients with chronic heart failure undergoing endocardial LV lead implantation. AVopt was assessed during atrio-BiVP with a "roving LV lead." Up to four locations were studied: mid-lateral wall, mid-septum (or a close alternative), site of greatest hemodynamic improvement, and LV lead implant site. The AVopt was compared to a fixed AV delay of 180 ms. RESULTS: Seventeen patients were included (12 male, aged 66.5 ± 12.8 years, ejection fraction 26 ± 7%, 16 left bundle branch block or high percentage of right ventricular pacing [RVP], QRS duration 167 ± 27 ms). In most locations (62/63), AVopt increased systolic blood pressure during BiVP compared with RVP (relative improvement 6 mmHg, interquartile range [IQR] 4-9 mmHg). Compared to a fixed AV delay, the hemodynamic improvement at AVopt was higher (1 mmHg, IQR 0.2-2.6 mmHg, p < .001). Within most patients (16/17), we observed a difference in AVopt between pacing sites (median paced AVopt 209 ms, IQR 117-250). Within this range, the hemodynamic impact of these differences was small (median loss 0.6 mmHg, IQR 0.1-2.6 mmHg). CONCLUSION: Within a patient, different endocardial LV lead locations have slightly different hemodynamic AVopt which are superior to a fixed AV delay. The hemodynamic consequence of applying an optimum from a different lead location is small.

How robust are recommended waiting times to pacing after cardiac surgery that are derived from observational data?

AIMS: For bradycardic patients after cardiac surgery, it is unknown how long to wait before implanting a permanent pacemaker (PPM). Current recommendations vary and are based on observational studies. This study aims to examine why this variation may exist. METHODS AND RESULTS: We conducted first a study of patients in our institution and second a systematic review of studies examining conduction disturbance and pacing after cardiac surgery. Of 5849 operations over a 6-year period, 103 (1.8%) patients required PPM implantation. Only pacing dependence at implant and time from surgery to implant were associated with 30-day pacing dependence. The only predictor of regression of pacing dependence was time from surgery to implant. We then applied the conventional procedure of receiver operating characteristic (ROC) analysis, seeking an optimal time point for decision-making. This suggested the optimal waiting time was 12.5 days for predicting pacing dependence at 30 days for all patients (area under the ROC curve (AUC) 0.620, P = 0.031) and for predicting regression of pacing dependence in patients who were pacing-dependent at implant (AUC 0.769, P < 0.001). However, our systematic review showed that recommended optimal decision-making time points were strongly correlated with the average implant time point of those individual studies (R = 0.96, P < 0.001). We further conducted modelling which revealed that in any such study, the ROC method is strongly biased to indicate a value near to the median time to implant as optimal. CONCLUSION: When commonly used automated statistical methods are applied to observational data with the aim of defining the optimal time to pacing after cardiac surgery, the suggested answer is likely to be similar to the average time to pacing in that cohort.

The digital MIQE guidelines: Minimum Information for Publication of Quantitative Digital PCR Experiments.

There is growing interest in digital PCR (dPCR) because technological progress makes it a practical and increasingly affordable technology. dPCR allows the precise quantification of nucleic acids, facilitating the measurement of small percentage differences and quantification of rare variants. dPCR may also be more reproducible and less susceptible to inhibition than quantitative real-time PCR (qPCR). Consequently, dPCR has the potential to have a substantial impact on research as well as diagnostic applications. However, as with qPCR, the ability to perform robust meaningful experiments requires careful design and adequate controls. To assist independent evaluation of experimental data, comprehensive disclosure of all relevant experimental details is required. To facilitate this process we present the Minimum Information for Publication of Quantitative Digital PCR Experiments guidelines. This report addresses known requirements for dPCR that have already been identified during this early stage of its development and commercial implementation. Adoption of these guidelines by the scientific community will help to standardize experimental protocols, maximize efficient utilization of resources, and enhance the impact of this promising new technology.

The use of 35S and Tnos expression elements in the measurement of genetically engineered plant materials.

An online survey was conducted by the International Life Sciences Institute, Food Biotechnology Committee, on the use of qualitative and quantitative polymerase chain reaction (PCR) assays for cauliflower mosaic virus 35S promoter and Agrobacterium tumefaciens Tnos DNA sequence elements for the detection of genetically engineered (GE) crop plant material. Forty-four testing laboratories around the world completed the survey. The results showed the widespread use of such methods, the multiplicity of published and in-house methods, and the variety of reference materials and calibrants in use. There was an interest on the part of respondents in validated quantitative assays relevant to all GE events that contain these two genetic elements. Data are presented by testing two variations each of five published real-time quantitative PCR methods for 35S detection on eight maize reference materials. The results showed that two of the five methods were not suitable for all the eight reference materials, with poor linear regression parameters and multiple PCR amplification products for some of the reference materials. This study demonstrates that not all 35S methods produce satisfactory results, emphasizing the need for method validation.

Standard reference material 2366 for measurement of human cytomegalovirus DNA.

Human cytomegalovirus (CMV), classified as human herpesvirus 5, is ubiquitous in human populations. Infection generally causes little illness in healthy individuals, but can cause life-threatening disease in those who are immunocompromised or in newborns through complications arising from congenital CMV infection. An important aspect in diagnosis and treatment is to track circulating viral load with molecular methods, particularly with quantitative PCR. Standardization is vital, because of interlaboratory variability (due in part to the variety of assays and calibrants). Toward that end, the U.S. National Institute of Standards and Technology produced a Standard Reference Material 2366 appropriate for establishing metrological traceability of assay calibrants. This standard is composed of CMV DNA (Towne(Δ147) bacterial artificial chromosome DNA). Regions of the CMV DNA that are commonly used as targets for PCR assays were sequenced. Digital PCR was used to quantify the DNA, with concentration expressed as copies per microliter. The materials were tested for homogeneity and stability. An interlaboratory study was conducted by Quality Control for Molecular Diagnostics (Glasgow, UK), in which one component of SRM 2366 was included for analysis by participants in a CMV external quality assessment and proficiency testing program.

The relative roles of collagen adhesive receptor DDR2 activation and matrix stiffness on the downregulation of focal adhesion kinase in vascular smooth muscle cells.

Cells within tissues derive mechanical anchorage and specific molecular signals from the insoluble extracellular matrix (ECM) that surrounds them. Understanding the role of different cues that extracellular matrices provide cells is critical for controlling and predicting cell response to scaffolding materials. Using an engineered extracellular matrix of Type I collagen we examined how the stiffness, supramolecular structure, and glycosylation of collagen matrices influence the protein levels of cellular FAK and the activation of myosin II. Our results show that (1) cellular FAK is downregulated on collagen fibrils, but not on a non-fibrillar monolayer of collagen, (2) the downregulation of FAK is independent of the stiffness of the collagen fibrils, and (3) FAK levels are correlated with levels of tyrosine phosphorylation of the collagen adhesion receptor DDR2. Further, siRNA depletion of DDR2 blocks FAK downregulation. Our results suggest that the collagen receptor DDR2 is involved in the regulation of FAK levels in vSMC adhered to Type I collagen matrices, and that regulation of FAK levels in these cells appears to be independent of matrix stiffness.

Factors affecting quantification of total DNA by UV spectroscopy and PicoGreen fluorescence.

The total amount of DNA in a preparation extracted from tissues can be measured in several ways, each method offering advantages and disadvantages. For the sake of accuracy in quantitation, it is of interest to compare these methodologies and determine if good correlation can be achieved between them. Different answers can also be clues to the physical state of the DNA. In this study, we investigated the lack of correlation between ultraviolet (UV) absorbance and fluorescent (PicoGreen) measurements of the concentration of DNAs isolated from plant tissues. We found that quantitation based on the absorbance-based method correlated with quantitation based on phosphorus content, while the PicoGreen-based method did not. We also found evidence of the production of single-stranded DNA under conditions where the DNA was not fragmented into small pieces. The PicoGreen fluorescent signal was dependent on DNA fragment size but only if the DNA was in pure water, while DNA in buffer was much less sensitive. Finally, we document the high sensitivity of the PicoGreen assays to the detergent known as CTAB (cetyldimethylethylammonium bromide). The CTAB-based method is highly popular for low-cost DNA extraction with many published variations for plant and other tissues. The removal of residual CTAB is important for accurate quantitation of DNA using PicoGreen.

Antifungal therapy for central nervous system histoplasmosis, using a newly developed intracranial model of infection.

The outcome of central nervous system (CNS) histoplasmosis is often unfavorable. Although fluconazole plays an integral role in treatment of fungal meningitis, its role in the treatment of histoplasmosis is hampered by reduced activity and potential development of resistance. A murine model of CNS histoplasmosis was used to evaluate the hypothesis that a combination of amphotericin B and fluconazole therapy would be superior to amphotericin B monotherapy. Groups of B6C3F(1) mice were infected by injection of Histoplasma capsulatum into the subarachnoid space. The addition of fluconazole hindered the antifungal effect of amphotericin B, as determined by measurement of fungal burden, suggesting antagonism in the brain. Fluconazole was less effective as a single agent than was amphotericin B, despite the greater penetration of fluconazole into brain tissues. The hypothesis that amphotericin B-fluconazole combination therapy would be superior to amphotericin B monotherapy for treatment of CNS histoplasmosis was not supported by this study.