[Research on Improving the Measurement Speed of THz-TDS Instruments].

The measurement speed is an important parameter of terahertz time-domain spectroscopy (THz-TDS) instruments. To improve the measurement speed of the spectrometer we need to increase the scanning speed of the delay line. In this paper, we study the influence of the scanning speed, the time constant of lock-in amplifier and the sampling rate on the signal quality. The results show that, when the time constant equal to 10 ms, increasing the scanning speed does not cause significant changes in the amplitude of the signal. But when the time constant equal to 30, 100 and 300 ms, with the increasing of the scanning speed the signal amplitude decreases rapidly. Therefore, the time constant should be set as small as possible to avoid deterioration of signal quality. On the other hand, higher the scanning speed is, fewer data points are collected with a same time-domain length. Therefore, when the scanning speed increase, not only the time constant should be reduced, but also the sampling rate should be increased to avoid the distortion of signal waveform caused by the number reduction of data points. The conclusions can provide a reference for improving the measurement speed of THz-TDS instrument.

Full-Space Wavefront Shaping of Broadband Vortex Beam with Switchable Terahertz Metasurface Based on Vanadium Dioxide.

Currently, vortex beams are extensively utilized in the information transmission and storage of communication systems due to their additional degree of freedom. However, traditional terahertz metasurfaces only focus on the generation of narrowband vortex beams in reflection or transmission mode, which is unbeneficial for practical applications. Here, we propose and design terahertz metasurface unit cells composed of anisotropic Z-shaped metal structures, two dielectric layers, and a VO2 film layer. By utilizing the Pancharatnam-Berry phase theory, independent control of a full 2π phase over a wide frequency range can be achieved by rotating the unit cell. Moreover, the full-space mode (transmission and reflection) can also be implemented by utilizing the phase transition of VO2 film. Based on the convolution operation, three different terahertz metasurfaces are created to generate vortex beams with different wavefronts in full-space, such as deflected vortex beams, focused vortex beams, and non-diffraction vortex beams. Additionally, the divergences of these vortex beams are also analyzed. Therefore, our designed metasurfaces are capable of efficiently shaping the wavefronts of broadband vortex beams in full-space, making them promising applications for long-distance transmission, high integration, and large capacity in 6G terahertz communications.

Terahertz Modulation and Ultrafast Characteristic of Two-Dimensional Lead Halide Perovskites.

In recent years, two-dimensional (2D) halide perovskites have been widely used in solar cells and photoelectric devices due to their excellent photoelectric properties and high environmental stability. However, the terahertz (THz) and ultrafast responses of the 2D halide perovskites are seldom studied, limiting the developments and applications of tunable terahertz devices based on 2D perovskites. Here, 2D R-P type (PEA)2(MA)2Pb3I10 perovskite films are fabricated on quartz substrates by a one-step spin-coating process to study their THz and ultrafast characteristics. Based on our homemade ultrafast optical pump-THz probe (OPTP) system, the 2D perovskite film shows an intensity modulation depth of about 10% and an ultrafast relaxation time of about 3 ps at a pump power of 100 mW due to the quantum confinement effect. To further analyze the recombination mechanisms of the photogenerated carriers, a three-exponential function is used to fit the carrier decay processes, obtaining three different decay channels, originating from free carrier recombination, exciton recombination, and trap-assisted recombination, respectively. In addition, the photoconductor changes (∆σ) at different pump-probe delay times are also investigated using the Drude-Smith model, and a maximum difference of 600 S/m is obtained at τp = 0 ps for a pump power of 100 mW. Therefore, these results show that the 2D (PEA)2(MA)2Pb3I10 film has potential applications in high-performance tunable and ultrafast THz devices.

Profiling of gene fusion involving targetable genes in Chinese gastric cancer.

BACKGROUND: Approximately half of all new cases of gastric cancer (GC) and related deaths occur in China. More than 80% of patients with GC are diagnosed at an advanced stage, which results in poor prognosis. Although HER2-directed therapy and immune checkpoint inhibitors have been somewhat successful, new drugs are still needed for the treatment of GC. Notably, several gene fusion-targeted drugs have been approved by the United States Food and Drug Administration for solid tumors, including GC, such as larotrectinib for NTRK fusion-positive cancers and zenocutuzumab for NRG1 fusion-positive cancers. However, gene fusions involving targetable genes have not been well characterized in Chinese patients with GC. AIM: To identify the profile of fusions involving targetable genes in Chinese patients with GC using clinical specimens and determine the distribution of patients with gene fusion variants among the molecular subtypes of GC. METHODS: We retrospectively analyzed gene fusion events in tumor tissue samples from 954 Chinese patients with GC. Clinicopathological characteristics were obtained from their medical records. Genetic alterations, such as single nucleotide variants, indels, amplifications, and gene fusions, were identified using a targeted sequencing panel containing 825 genes. Fusions were validated by fluorescence in situ hybridization (FISH) using break-apart probes. The microsatellite instability (MSI) status was evaluated using MSIsensor from the targeted sequencing panel data. Tumor mutational burden (TMB) was calculated using the total number of nonsynonymous mutations divided by the total genomic targeted region. Chi-square analysis was used to determine the enrichment of gene fusions associated with the molecular subtypes of GC. RESULTS: We found that 1.68% (16/954) of patients harbored 20 fusion events involving targetable genes. RARA fusions (n = 5) were the most common, followed by FGFR2, BRAF, MET, FGFR3, RET, ALK, EGFR, NTRK2, and NRG1 fusions. Two of the RARA fusions, EML4-ALK (E6:E20) and EGFR-SEPTIN14 (E7:E10), have been identified in other tumors but not in GC. Surprisingly, 18 gene fusion events were previously not reported in any cancer types. Twelve of the eighteen novel gene fusions included complete exons encoding functional domains of targetable genes, such as the tyrosine kinase domain of receptor tyrosine kinases and the DNA- and ligand-binding domains of RARA. Consistent with the results of detection using the targeted sequencing fusion panel, the results of FISH (fluorescence in situ hybridization) confirmed the rearrangement of FGFR2 and BRAF in tumors from patients 04 and 09, respectively. Genetic analysis indicated that the fusion genes were significantly enriched in patients with ERBB2 amplification (P = 0.02); however, there were no significant differences between fusion-positive and fusion-negative patients in age, sex, MSI status, and TMB. CONCLUSION: We characterized the landscape of fusions involving targetable genes in a Chinese GC cohort and found that 1.68% of patients with GC harbor potential targetable gene fusions, which were enriched in patients with ERBB2 amplification. Gene fusion detection may provide a potential treatment strategy for patients with GC with disease progression following standard therapy.

Graphene-Modulated Terahertz Metasurfaces for Selective and Active Control of Dual-Band Electromagnetic Induced Reflection (EIR) Windows.

Currently, metasurfaces (MSs) integrating with different active materials have been widely explored to actively manipulate the resonance intensity of multi-band electromagnetic induced transparency (EIT) windows. Unfortunately, these hybrid MSs can only realize the global control of multi-EIT windows rather than selective control. Here, a graphene-functionalized complementary terahertz MS, composed of a dipole slot and two graphene-integrated quadrupole slots with different sizes, is proposed to execute selective and active control of dual-band electromagnetic induced reflection (EIR) windows. In this structure, dual-band EIR windows arise from the destructive interference caused by the near field coupling between the bright dipole slot and dark quadrupole slot. By embedding graphene ribbons beneath two quadrupole slots, the resonance intensity of two windows can be selectively and actively modulated by adjusting Fermi energy of the corresponding graphene ribbons via electrostatic doping. The theoretical model and field distributions demonstrate that the active tuning behavior can be ascribed to the change in the damper factor of the corresponding dark mode. In addition, the active control of the group delay is further investigated to develop compact slow light devices. Therefore, the selective and active control scheme introduced here can offer new opportunities and platforms for designing multifunctional terahertz devices.

Tunable bandwidth of double electromagnetic induced transparency windows in terahertz graphene metamaterial.

By patterning graphene on a SiO2/Si substrate, in this paper, we design and numerically investigate double electromagnetic induced transparency (EIT) windows in a terahertz metamaterial based on a π-like graphene structure. The surface current distributions reveal that the double EIT windows arise from the destructive interferences caused by different asymmetric coupling modes. Moreover, the bandwidth of two transparency windows can be actively controlled by changing the asymmetric coupling strength. By shifting the Fermi energy of graphene, more interestingly, the bandwidth and frequency modulation depths of the two transparency windows is 38.4% and 36% respectively, and the associated group delay and delay bandwidth product (DBP) can also be actively tuned. Therefore, such EIT-like graphene metamaterials are promising candidates for designing slow-light devices and wide-band filters.

Effect of structure on sensing performance of a target induced signaling probe shifting DNA-based (TISPS-DNA) sensor.

A type of "signal on" displacement-based sensors named target induced signaling probe shifting DNA-based (TISPS-DNA) sensor were developed for a designated DNA detection. The signaling mechanism of the signaling probe (SP) shifting different from the classical conformation/flexibility change mode endows the sensor with high sensitivity. Through using thiolated or no thiolated capturing probe (CP), two 3-probe sensing structures, sensor-1 and sensor-2, were designed and constructed. The systematical comparing research results show that both sensors exhibit some similarities or big differences in sensing performance. On the one hand, the similarity in structures determines the similarity in some aspects of signaling mechanism, background signal, signal changing form, anti-fouling ability and versatility; on the other hand, the slight difference in structures also results in two opposite hybridization modes of gradual increasing resistance and gradual decreasing resistance which can affect the hybridization efficiency between the assistant probe (AP) and the SP, further producing some big differences in sensing performance, for example, apparently different signal enhancement (SE) change, point mutation discrimination ability and response speed. Under the optimized fabrication and detection conditions, both sensors feature high sensitivity for target DNAs with the detection limits of ∼10 fM for sensor-1 and ∼7 fM for sensor-2, respectively. Among many acquired sensing virtues, the sensor-1 shows a peculiar specificity adjustability which is also a highlight in this work.

A "signal on" protection-displacement-hybridization-based electrochemical hepatitis B virus gene sequence sensor with high sensitivity and peculiar adjustable specificity.

One "signal on" electrochemical sensing strategy was constructed for the detection of a specific hepatitis B virus (HBV) gene sequence based on the protection-displacement-hybridization-based (PDHB) signaling mechanism. This sensing system is composed of three probes, one capturing probe (CP) and one assistant probe (AP) which are co-immobilized on the Au electrode surface, and one 3-methylene blue (MB) modified signaling probe (SP) free in the detection solution. One duplex are formed between AP and SP with the target, a specific HBV gene sequence, hybridizing with CP. This structure can drive the MB labels close to the electrode surface, thereby producing a large detection current. Two electrochemical testing techniques, alternating current voltammetry (ACV) and cyclic voltammetry (CV), were used for characterizing the sensor. Under the optimized conditions, the proposed sensor exhibits a high sensitivity with the detection limit of ∼5fM for the target. When used for the discrimination of point mutation, the sensor also features an outstanding ability and its peculiar high adjustability.

Using the synergism strategy for highly sensitive and specific electrochemical sensing of Streptococcus pneumoniae Lyt-1 gene sequence.

With the help of the interaction mode of capture probe-target-signal probe (CP-T-SP), an electrochemical sensing method based on the synergism strategy of dual-hybridized signaling probes modified with 6 MB (methylene blue), background suppression and large surface area Au electrode is developed for the detection of Streptococcus pneumoniae (S. pneumoniae) Lyt-1 gene sequence. The proposed sensor features a very low detection limit (LOD) of ∼0.5 fM for the target. This method also exhibits highly versatility and can apply to the construction of other sensors for the analysis of similar designated pathogenic bacteria gene sequence (PBGS).

A highly sensitive and specific electrochemical sensing method for robust detection of Escherichia coli lac Z gene sequence.

Based on the interaction mode of capture probe-target-signal probe (CP-T-SP), a simple but efficient electrochemical sensing method is developed for robust detection of Escherichia coli (E. coli) lac Z gene sequence. The sensing system is simply composed of two probes with CP attached to the surface of gold electrode and methylene blue (MB)-labeled SP free in the detecting solution. Two duplexes are formed with the target DNA, an E. coli lac Z gene sequence, hybridizing with two ends of CP and SP separately. This structure can position the MB labels near to the electrode surface, thereby resulting in the change of detecting current. The proposed sensor exhibits a high sensitivity with a detection limit of ∼30 fM for target DNA and good mismatch discrimination ability (MDA). This method can also be applied to the construction of other sensors for the analysis of similar designated pathogenic bacteria gene sequence (PBGS).