RESUMEN
The chemical selectivity and faradaic efficiency of high-index Cu facets for the CO2 reduction reaction (CO2 RR) is investigated. More specifically, shape-controlled nanoparticles enclosed by Cu {hk0} facets are fabricated using Cu multilayer deposition at three distinct layer thicknesses on the surface facets of Au truncated ditetragonal nanoprisms (Au DTPs). Au DTPs are shapes enclosed by 12 high-index {310} facets. Facet angle analysis confirms DTP geometry. Elemental mapping analysis shows Cu surface layers are uniformly distributed on the Au {310} facets of the DTPs. The 7â nm Au@Cu DTPs high-index {hk0} facets exhibit a CH4 : CO product ratio of almost 10 : 1 compared to a 1 : 1 ratio for the reference 7â nm Au@Cu nanoparticles (NPs). Operando Fourier transform infrared spectroscopy spectra disclose reactive adsorbed *CO as the main intermediate, whereas CO stripping experiments reveal the high-index facets enhance the *CO formation followed by rapid desorption or hydrogenation.
RESUMEN
One of the great challenges of hybrid organic-inorganic perovskite photovoltaics is the material's stability at elevated temperatures. Over the past years, significant progress has been achieved in the field by compositional engineering of perovskite semiconductors, e.g., using multiple-cation perovskites. However, given the large variety of device architectures and nonstandardized measurement protocols, a conclusive comparison of the intrinsic thermal stability of different perovskite compositions is missing. In this work, we systematically investigate the role of cation composition on the thermal stability of perovskite thin films. The cations in focus of this study are methylammonium (MA), formamidinium (FA), cesium, and the most common mixtures thereof. We compare the thermal degradation of these perovskite thin films in terms of decomposition, optical losses, and optoelectronic changes when stressed at 85 °C for a prolonged time. Finally, we demonstrate the effect of thermal stress on perovskite thin films with respect to their performance in solar cells. We show that all investigated perovskite thin films show signs of degradation under thermal stress, though the decomposition is more pronounced in methylammonium-based perovskite thin films, whereas the stoichiometry in methylammonium-free formamidinium lead iodide (FAPbI3) and formamidinium cesium lead iodide (FACsPbI3) thin films is much more stable. We identify compositions of formamidinium and cesium to result in the most stable perovskite compositions with respect to thermal stress, demonstrating remarkable stability with no decline in power conversion efficiency when stressed at 85 °C for 1000 h. Thereby, our study contributes to the ongoing quest of identifying the most stable perovskite compositions for commercial application.
RESUMEN
The surface, interface, and bulk properties are a few of the most critical factors that influence the performance of perovskite solar cells. The photoelectron spectroscopy (PES) is used as a technique to analyze these properties. However, the information depth of PES is limited to 10-20 nm, which makes it not suitable to study the complete devices, which have a thickness of â¼1 µm. Here, we introduce a novel and simple technique of PES on a tapered cross section (TCS-PES). It provides both lateral and vertical resolutions compared to the conventional PES so that it is suitable to study a complete perovskite solar cell. It offers many benefits over conventional PES methods such as the chemical composition in the micrometer scale from the surface to the bulk and the electronic properties at the multiple interfaces. The chemical natures of different layers of the perovskite-based solar cells [(FAPbI3)0.85(MAPbBr3)0.15] can be identified precisely for the first time using the TCS-PES method. We found that the perovskite layer has higher iodine concentration at the Spiro/perovskite interface and higher bromine concentration at the TiO2/perovskite interface. UPS measurements on the tapered cross section revealed that the perovskite is n-type, and the solar cell studied here is a p-n-n structure type device. The unique possibilities to analyze the complete solar cell by XPS and UPS allow us to estimate the band bending in a working solar cell. Moreover, this technique can further be used to study the device under operating conditions, and it can be applied in other solid-state devices like solid electrolyte Li-ion batteries, LEDs, or photoelectrodes.
RESUMEN
In the urge of designing noble metal-free and sustainable electrocatalysts for oxygen evolution reaction (OER), herein, a mineral Digenite Cu9 S5 has been prepared from a molecular copper(I) precursor, [{(PyHS)2 CuI (PyHS)}2 ](OTf)2 (1), and utilized as an anode material in electrocatalytic OER for the first time. A hot injection of 1 yielded a pure phase and highly crystalline Cu9 S5 , which was then electrophoretically deposited (EPD) on a highly conducting nickel foam (NF) substrate. When assessed as an electrode for OER, the Cu9 S5 /NF displayed an overpotential of merely 298±3â mV at a current density of 10â mA cm-2 in alkaline media. The overpotential recorded here supersedes the value obtained for the best reported Cu-based as well as the benchmark precious-metal-based RuO2 and IrO2 electrocatalysts. In addition, the choronoamperometric OER indicated the superior stability of Cu9 S5 /NF, rendering its suitability as the sustainable anode material for practical feasibility. The excellent catalytic activity of Cu9 S5 can be attributed to the formation of a crystalline CuO overlayer on the conductive Cu9 S5 that behaves as active species to facilitate OER. This study delivers a distinct molecular precursor approach to produce highly active copper-based catalysts that could be used as an efficient and durable OER electro(pre)catalysts relying on non-precious metals.