Miniaturized paper-based analytical device for the portable analysis of phyto-cannabinoids in plant and oral fluids.

In this work, a low-cost and eco-friendly paper-based analytical device (PAD) method is described for the determination of phyto-cannabinoids in cannabis and oral fluids based on a simple colorimetric reaction. The PAD was able to distinguish tetrahydrocannabinol (THC)- and cannabidiol (CBD)-rich plant samples by using 4-aminophenol (4-AP) and later on to quantify total phyto-cannabinoid content (THC + CBD + CBN) in plant and oral fluids by using the Fast Corinth V reagent. The chemical and physical properties regarding paper type and reagent concentration in the PAD were optimized to achieve the best analytical performance. After that, analytical features were obtained, including a linear range of 0.01-0.1 mg mL-1, a limit of detection (LOD) of 0.003 mg mL-1, and a suitable precision, expressed as relative standard deviation (RSD) lower than 10%. Furthermore, no significant interferences were observed in colorimetric reactions when tea, herbs, and drug samples were analyzed. Additionally, the PAD proved color stability up to 1 month after the sampling at 25 °C. The developed PAD was suitable for determining total phyto-cannabinoid content in plants and oral fluids, obtaining good results compared to GC-MS. Overall, this method showed good reliability resulting in an operational on-site device for drug monitoring.

Novel Nanozeolitic Imidazolate Framework (ZIF-8)-Luciferase Biocomposite for Nanosensing Applications.

The identification of new strategies to improve the stability of proteins is of utmost importance for a number of applications, from biosensing to biocatalysis. Metal-organic frameworks (MOFs) have been shown as a versatile host platform for the immobilization of proteins, with the potential to protect proteins in harsh conditions. In this work, a new thermostable luciferase mutant has been selected as a bioluminescent protein model to investigate the suitability of MOFs to improve its stability and prompt its applications in real-world applications, for example, ATP detection in portable systems. The luciferase has been immobilized onto zeolitic imidazolate framework-8 (ZIF-8) to obtain a bioluminescent biocomposite with enhanced performance. The biocomposite ZIF-8@luc has been characterized in harsh conditions (e.g., high temperature, non-native pH, etc.). Bioluminescence properties confirmed that MOF enhanced the luciferase stability at acidic pH, in the presence of organic solvents, and at -20 °C. To assess the feasibility of this approach, the recyclability, storage stability, precision, and Michaelis-Menten constants (Km) for ATP and d-luciferin have been also evaluated. As a proof of principle, the suitability for ATP detection was investigated and the biocomposite outperformed the free enzyme in the same experimental conditions, achieving a limit of detection for ATP down to 0.2 fmol.

Aptamer-functionalized stir bar sorptive extraction for selective isolation, identification, and determination of concanavalin A in food by MALDI-TOF-MS.

An aptamer-functionalized stir bar sorptive extraction (SBSE) coating is described for the first time devoted to selective isolation and preconcentration of an allergenic food protein, concavanalin A (Con A), followed by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF-MS) determination. For this purpose, the polytetrafluoroethylene surface of commercial magnetic stir bars was properly modified and vinylized to immobilize a thiol-modified aptamer against Con A via straightforward "thiol-ene" click chemistry. The aptamer-functionalized stir bar was employed as SBSE sorbent to isolate Con A, and several parameters that can affect the extraction efficiency were investigated. Under the optimized conditions, Con A was extracted and desorbed during 30 and 45 min, respectively, at 25 °C and 600 rpm. The SBSE MALDI-TOF-MS method provided limits of detection of 0.5 µg mL-1 for Con A. Furthermore, the SBSE coating was highly selective to Con A compared to other lectins. The developed method was successfully applied to the determination of low levels of Con A in several food matrices (i.e., white beans as well as chickpea, lentils, and wheat flours). Recoveries ranged from 81 to 97% with relative standard deviations below 7%. The aptamer-based stir bars presented suitable physical and chemical long-term stability (1 month) and a reusability of 10 and 5 extraction cycles with standards and food extracts, respectively. The developed aptamer-affinity extraction devices open up the possibility of developing novel highly selective SBSE coatings for the extraction of proteins and peptides from complex samples.

Micro-paper-based analytical device decorated with metal-organic frameworks for the assay of synthetic cannabinoids in oral fluids coupled to ion mobility spectrometry.

A new concept of paper-based device has been developed combining the advantages of cellulose supports and the rich surface chemistry of metal-organic frameworks (MOFs). The composite, named as NH2-UiO-66@paper, has been developed for the isolation of synthetic cannabinoid receptor agonists (SCRAs) in oral fluids, trying to mimic the interactions of those compounds with the human CB1R and CB2R receptors, mainly governed by hydrogen bonding and π-interactions with serine and histidine residues. MOF selection (UiO-66) and functionalization of the ligand (2-aminoterephthalic acid) has been done according to the following criteria: (i) water stability of the selected MOF, and (ii) promoting appropriate interactions with SCRAs due to the MOF nature. NH2-UiO-66@paper composite has been characterized in depth and the results confirmed that the material is stable at the temperature selected for thermal desorption (230 °C). Furthermore, the developed method provided appropriate precision values (RSD < 12%) and a limit of detection as low as 10 ng using ion mobility spectrometry as analytical technique. Lastly, the method has been successfully applied to the isolation of several synthetic cannabinoids from oral fluids. This method claims to be an interesting approach for expanding the combination of MOFs with sustainable support and represents a promising alternative to sophisticated and non-portable systems due to the negligible sample treatment required and the simplicity of the operation, which can be applied with screening purposes.

3D printed spinning cup-shaped device for immunoaffinity solid-phase extraction of diclofenac in wastewaters.

This article reports current research efforts towards designing bespoke microscale extraction approaches exploiting the versatility of 3D printing for fast prototyping of novel geometries of sorptive devices. This is demonstrated via the so-called 3D printed spinning cup-based platform for immunoextraction of emerging contaminants using diclofenac as a model analyte. A new format of rotating cylindrical scaffold (containing a semispherical upper cavity) with enhanced coverage of biorecognition elements, and providing elevated enhancement factors with no need of eluate processing as compared with other microextraction stirring units is proposed. Two distinct synthetic routes capitalized upon modification of the acrylate surface of stereolithographic 3D printed parts with hexamethylenediamine or branched polyethyleneimine chemistries were assayed for covalent binding of monoclonal diclofenac antibody.Under the optimized experimental conditions, a LOD of 108 ng L-1 diclofenac, dynamic linear range of 0.4-1,500 µg L-1, and enrichment factors > 83 (for near-exhaustive extraction) were obtained using liquid chromatography coupled with UV-Vis detection. The feasibility of the antibody-laden device for handling of complex samples was demonstrated with the analysis of raw influent wastewaters with relative recoveries ranging from 102 to 109%. By exploiting stereolithographic 3D printing, up to 36 midget devices were fabricated in a single run with an estimated cost of mere 0.68 euros per 3D print and up to 16 €/device after the incorporation of the monoclonal antibody.

Zeolitic imidazolate framework-8 decorated with gold nanoparticles for solid-phase extraction of neonicotinoids in agricultural samples.

A composite built with aminated zeolitic imidazolate framework and gold nanoparticles (AuNPs) for solid-phase extraction (SPE) of neonicotinoids in agricultural samples is presented. The composite was prepared through the assembly of AuNPs onto the surface of metal-organic framework based on the strong interaction between the amino group and AuNP. These metallic surfaces provided additional interactions based on the affinity of amino and cyano groups present in the target compounds. The composite was characterized by scanning electron microscopy, powder X-ray diffraction, Fourier-transform infrared spectroscopy, and surface area measurements. Regarding the SPE protocol, several parameters that can influence the extraction performance were optimized, such as sample volume or composition of elution solvent, among others. After elution, the analytes were determined via HPLC with diode-array detection. Under the selected conditions, satisfactory recoveries of five pesticides (thiamethoxan, clothianidin, imidacloprid, acetamiprid, and thiacloprid) were obtained (between 80 and 110%) in real samples, whereas the limits of detection ranged from 0.019 to 0.041 µg L-1 in aqueous samples and 0.3 to 0.8 µg g-1 in solid samples.

Determination of antibiotics in meat samples using analytical methodologies: A review.

Antibiotics are widely used to prevent or treat some diseases in human and veterinary medicine and also as animal growth promoters. The presence of these compounds in foods derived from food-producing animals can be a risk for human health. Consequently, regulatory agencies have set maximum residue limits for antibiotics in food samples. Therefore, the development of novel methodologies for its determination in food samples is required. Specifically, the analysis and quantification of these substances in meat tissues is a challenge for the analytical chemistry research community. This is due to the complexity of the matrix and the low detection limits required by the regulatory agencies. In this sense, a comprehensive review on the development of new sample preparation treatments involving extraction, cleanup, and enrichment steps of antibiotics in meat samples in combination with sensitive and sophisticated determination techniques that have been carry out in the last years is necessary. Therefore, the aim of this work is to summarize the published methodologies for the determination of antibiotics from 2016 until the beginning of the second semester of 2020. The first part of this review includes an introduction about antibiotic families, followed by sample preparation and determination techniques applied to the different families. Finally, a detailed discussion of the current trends and the future possible perspectives in this field are also included.

Bio-metal-organic frameworks for molecular recognition and sorbent extraction of hydrophilic vitamins followed by their determination using HPLC-UV.

A bio-metal-organic framework (bio-MOF) derived from the amino acid L-serine has been prepared in bulk form and evaluated as sorbent for the molecular recognition and extraction of B-vitamins. The functional pores of bio-MOF exhibit high amounts of hydroxyl groups jointly directing other supramolecular host-guest interactions thus providing the recognition of B-vitamins in fruit juices and energy drinks. Single-crystal X-ray diffraction studies reveal the specific B-vitamin binding sites and the existence of multiple hydrogen bonds between these target molecules and the framework. It offered unique snapshots to accomplish an efficient capture of these solutes in complex aqueous matrices. Four B-vitamins (thiamin, nicotinic acid, nicotinamide, and pyridoxine) were investigated. They were eluted from the sorbent with phosphate buffer at pH 7 and analyzed by HPLC with UV detection. The sorbent was compared with commercial C18 cartridges. Following the procedure, acceptable reproducibility (RSD values < 14%) was achieved, and the detection limits were in the range 0.4 to 1.4 ng mL-1. The method was applied to the analysis of energy drink and juice samples and the recoveries were between 75 and 123% in spiked beverage samples. Graphical abstractA bio-MOF as SPE sorbent was prepared and applied to the extraction of B-vitamins in fruit juices and energy drinks.

Recent Advances in Affinity MOF-Based Sorbents with Sample Preparation Purposes.

This review summarizes the recent advances concerning metal-organic frameworks (MOFs) modified with several biomolecules (e.g., amino acids, nucleobases, proteins, antibodies, aptamers, etc.) as ligands to prepare affinity-based sorbents for application in the sample preparation field. The preparation and incorporation strategies of these MOF-based affinity materials were described. Additionally, the different types of ligands that can be employed for the synthesis of these biocomposites and their application as sorbents for the selective extraction of molecules and clean-up of complex real samples is reported. The most important features of the developed biocomposites will be discussed throughout the text in different sections, and several examples will be also commented on in detail.

Incorporation of metal-organic framework amino-modified MIL-101 into glycidyl methacrylate monoliths for nano LC separation.

Metal-organic frameworks consisting of amino-modified MIL-101(M: Cr, Al, and Fe) crystals have been synthesized and subsequently incorporated to glycidyl methacrylate monoliths to develop novel stationary phases for nano-liquid chromatography. Two incorporation approaches of these materials in monoliths were explored. The metal-organic framework materials were firstly attached to the pore surface through reaction of epoxy groups present in the parent glycidyl methacrylate-based monolith. Alternatively, NH2 -MIL-101(M) were admixed in the polymerization mixture. Using short time UV-initiated polymerization, monolithic beds with homogenously dispersed metal-organic frameworks were obtained. The chromatographic performance of embedded UV-initiated composites was demonstrated with separations of polycyclic aromatic hydrocarbons and non-steroidal anti-inflammatory drugs as test solutes. In particular, the incorporation of the NH2 -MIL-101(Al) into the organic polymer monoliths led to an increase in the retention of all the analytes compared to the parent monolith. The hybrid monolithic columns also exhibited satisfactory run-to-run and column-to-column reproducibility.

Hybrid monoliths with metal-organic frameworks in spin columns for extraction of non-steroidal drugs prior to their quantitation by reversed-phase HPLC.

A (glycidyl methacrylate)-co-(ethylene glycol dimethacrylate) polymer (poly(GMA-co-EDMA)) was functionalized with metal-organic frameworks (MOF) and used as a sorbent for solid-phase extraction (SPE). The polymeric sorbent was prepared in-situ by photopolymerization in a previously wall-modified spin column, and then modified with an amino-modified MOF of type NH2-MIL-101(Cr). The sorbents were used for the extraction of nonsteroidal anti-inflammatory drugs (NSAIDs) from human urine samples. The sorbent was compared with the parent monolith and embedded approach, where the MOF particles are admixed in the polymerization mixture before the in-situ polymerization in the modified spin column. SPE is performed by percolating the sample solutions in a centrifuge, which streamlines the SPE steps. The hybrid composites were characterized by scanning electron microscopy and nitrogen intrusion porosimetry. Three NSAIDs (ketoprofen, flurbiprofen, and ibuprofen) were tested. They were eluted from the sorbent with acidified water-acetonitrile mixtures and subsequently analyzed by reversed-phase HPLC with UV detection. The detection limits varied in the range from 0.1 to 7 µg·L-1, and the precisions (relative standard deviation) were <14% in all the cases. The recoveries were between 71.0 and 78.0% in spiked urine samples. Graphical abstractA hybrid monolith modified with amino-modified MOF [named NH2-MIL-101(Cr)] in wall-modified spin columns was prepared. The resulting micro-extraction device was applied to the extraction and preconcentration of non-steroidal anti-inflammatory drugs.

Extraction of aflatoxins by using mesoporous silica (type UVM-7), and their quantitation by HPLC-MS.

A solid-phase extraction procedure has been developed by using a sorbent derived from UVM-7 mesoporous silica. The sorbent was applied to the extraction of aflatoxins B1, B2, G1 and G2 from tea samples followed by HPLC with mass spectrometric detection. The sorbent was characterized by transmission electron microscopy, nuclear magnetic resonance, X-ray diffraction and nitrogen adsorption-desorption. UVM-7 is found to be the best solid phase. The amount of solid-phase, type and volume of eluent, pH value and ionic strength and breakthrough volume were optimized. Following the recommended procedure, recoveries between 96.0 and 98.2% were achieved, with RSD values of <5.1%, and the limits of detection are in the range from 0.14 to 0.7 µg·kg-1. The material is reusable. The method was applied to the analysis of real tea samples. A low matrix effect is found, and recoveries are >88%. The results were compared with those obtained by immunoaffinity columns as a reference method. Only low concentrations of aflatoxin G2 were found in some samples, and results obtained with both methods are shown to be statistically sound and comparable. Graphical abstractSchematic representation of a mesoporous silica sorbent (type UVM-7) for the extraction of aflatoxins (AF) from tea by solid-phase extraction (SPE), and its determination by liquid chromatography. The morphology of the material allows to retain the analytes very well.

Improving Fractionation of Human Milk Proteins through Calcium Phosphate Coprecipitation and Their Rapid Characterization by Capillary Electrophoresis.

This work describes a simple sample pretreatment method for the fractionation of human milk proteins (into their two main groups, whey and caseins) prior to their analysis. The protein-extraction protocol is based on the addition of calcium phosphate to nonadjusted pH human milk. The combination of calcium ions with phosphate results in an effective coprecipitation of caseins. To assess the suitability of this fractionation protocol, the protein extracts were analyzed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), LC-MS/MS, and capillary electrophoresis (CE) analysis. The results evidence a significant decrease in contamination of casein fraction with whey proteins and vice versa compared with the conventional isoelectric precipitation of caseins. In addition, CE fraction collection coupled to LC-MS/MS (off-line coupling) has been successfully applied to the identification of minor proteins in this complex matrix. The methodology presented here constitutes a promising tool to enlarge the knowledge of human milk proteome.

Zwitterionic codeine-derived methacrylate monoliths for enantioselective capillary electrochromatography of chiral acids and chiral bases.

Thiol-ene click reaction of N-acetyl-L-cysteine methyl ester to codeine, followed by reaction with allyl isocyanate and hydrolysis to the corresponding zwitterionic chiral selector and its subsequent bonding to the surface of a methacrylate monolith provided a new chiral capillary column for enantiomer separation of chiral acids and chiral bases. First, the epoxy groups of a poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolith were converted into amine residues, followed by reaction with allylglycidyl ether. In this way, a spacer arm was bonded to the surface before coating and cross-linking poly(3-mercaptopropyl methylsiloxane) (PMPMS) via radical addition (thiol-ene click reaction) to the surface. In order to improve the performance of the monolithic chiral stationary phase, thio ether and residual thiol groups were oxidized to sulfonyl and sulphonate groups, respectively. This novel chiral stationary phase (CSP) was evaluated by capillary electrochromatography (CEC) using two chiral model compounds, namely N-3,5-dinitrobenzoyl-R,S-leucine (retained by anion-exchange mechanism) and mefloquine (by cation-exchange process). The ion-exchange retention mechanism on the CSP was characterized for these two counterionic model solutes by varying the mobile phase composition, including the nature of solvents, the concentration of counter-ions and co-ions, and the acid-to-base ratio. A series of chiral ß-blockers and amino acid derivatives was used to further check the performance of the modified monolith under the optimal conditions. Several enantiomers were baseline resolved with reasonable peak efficiencies (up to 60,000 theoretical plates per meter for the second eluted enantiomer).

Solid-phase extraction of phospholipids using mesoporous silica nanoparticles: application to human milk samples.

In this study, mesoporous silica materials (MSMs) with bimodal pore systems (namely, UVM-7), MCM-41 silica, and a commercial silica-based material were evaluated as solid-phase extraction (SPE) sorbents for the isolation of phospholipids (PLs) using phosphatidylcholine as a test compound. Morphological characterization (including TEM, surface, and size pore measurements) of these materials was carried out. The mechanism of interaction of the target analyte with the MSMs was also studied. With regard to the SPE process, several experimental parameters that affect the extraction performance (e.g., loading and elution solvent, breakthrough volume, loading capacity, and reusability) were investigated. The recommended protocol was applied to the extraction of PLs in human milk fat samples. The extracted PLs were then determined by hydrophilic interaction liquid chromatography (HILIC) using evaporative light scattering detection (ELSD). This work reports the first application of silica-based mesoporous materials to preconcentrate PLs in these complex matrices. Graphical abstract ᅟ.

Poly(ethylene glycol) diacrylate based monolithic capillary columns for the analysis of polar small solutes by capillary electrochromatography.

Monolithic stationary phases based on poly(ethylene glycol) diacrylates for capillary electrochromatography were developed. Several poly(ethylene glycol) diacrylates (Mn 250, 575, and 700) were used as single monomers and the resulting columns were carefully compared. Methanol and ethyl ether were selected as porogenic solvents, and in all cases ultraviolet radiation was selected as initiation method to prepare polymeric monoliths. The influence of the monomer chain length and ratio monomer/porogen on the morphological and electrochromatographic properties of the resulting monoliths was investigated. Several families of compounds with different polarity (alkyl benzenes, organophosphorous pesticides, benzoic acid derivatives, and sulfonamides) were selected to evaluate the performance of the fabricated monolithic columns. The best results were obtained for poly(ethylene glycol) diacrylate 700 monoliths affording efficiencies of 144 000 plates/m for retained polar aromatic small molecules and excellent reproducibility in column preparation (RSD values below 2.5%).

Photografted methacrylate-based monolithic columns coated with cellulose tris(3,5-dimethylphenylcarbamate) for chiral separation in CEC.

A chiral capillary monolithic column for enantiomer separation in capillary electrochromatography was prepared by coating cellulose tris(3,5-dimethylphenylcarbamate) on porous glycidyl methacrylate-co-ethylene dimethacrylate monolith in capillary format grafted with chains of [2(methacryloyloxy)ethyl] trimethylammonium chloride. The surface modification of the monolith by the photografting of [2(methacryloyloxy)ethyl] trimethylammonium chloride monomer as well as the coating conditions of cellulose tris(3,5-dimethylphenylcarbamate) onto the grafted monolithic scaffold were optimized to obtain a stable and reproducible chiral stationary phase for capillary electrochromatography. The effect of organic modifier (acetonitrile) in aqueous mobile phase for the enantiomer separation by capillary electrochromatography was also investigated. Several pairs of enantiomers including acidic, neutral, and basic analytes were tested and most of them were partially or completely resolved under aqueous mobile phases. The prepared monolithic chiral stationary phases exhibited a good stability, repeatability, and column-to-column reproducibility, with relative standard deviations below 11% in the studied electrochromatographic parameters.

Carbon nanotube-modified monolithic polymethacrylate pipette tips for (micro)solid-phase extraction of antidepressants from urine samples.

This work evaluates the potential of methacrylate monoliths with multi-walled carbon nanotubes incorporated into the polymeric network for the extraction of antidepressants from human urine. The method is based on a micropipette solid-phase extraction tip containing a hybrid monolithic material covalently attached to the polypropylene housing. A polymer layer made from poly(ethylene dimethacrylate) was bound to the inner surface of a polypropylene tip via UV grafting. The preparation of the monolith and the microextraction steps were optimized in terms of adsorption capacity. Limits of detection ranged from 9 to 15 µg·L-1. The average precision of the method varied between 3 and 5% (intra-tips), and from 4 to 14% (inter-tips). The accuracy of the method was evaluated through a recovery study by using spiked samples. Graphical abstract Hybrid polymer monoliths containing multi-walled carbon nanotubes (MWCNTs) were prepared in pipette tips by photo-polymerization approach. The extraction devices were used for the extraction of antidepressants in urine samples.

Determination of azoxystrobin and chlorothalonil using a methacrylate-based polymer modified with gold nanoparticles as solid-phase extraction sorbent.

This paper describes a novel and sensitive method for extraction, preconcentration, and determination of two important widely used fungicides, azoxystrobin, and chlorothalonil. The developed methodology is based on solid-phase extraction (SPE) using a polymeric material functionalized with gold nanoparticles (AuNPs) as sorbent followed by high-performance liquid chromatography (HPLC) with diode array detector (DAD). Several experimental variables that affect the extraction efficiency such as the eluent volume, sample flow rate, and salt addition were optimized. Under the optimal conditions, the sorbent provided satisfactory enrichment efficiency for both fungicides, high selectivity and excellent reusability (>120 re-uses). The proposed method allowed the detection of 0.05 µg L-1 of the fungicides and gave satisfactory recoveries (75-95 %) when it was applied to drinking and environmental water samples (river, well, tap, irrigation, spring, and sea waters).

UV-polymerized butyl methacrylate monoliths with embedded carboxylic single-walled carbon nanotubes for CEC applications.

The preparation of polymeric monoliths with embedded carboxy-modified single-walled carbon nanotubes (c-SWNTs) and their use for capillary electrochromatography (CEC) is described. Carbon nanotube composites were obtained by preparing a polymerization mixture in the presence of increasing c-SWNT concentrations, followed by UV initiation. The novel stationary phases were studied by optical microscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman spectroscopy. Using short UV-polymerization times, the optimized porogenic solvent (a binary mixture of 1,4-butanediol and 2-propanol) gave rise to polymeric beds with homogenously dispersed embedded c-SWNTs. The CEC features of these monoliths were evaluated using polycyclic aromatic hydrocarbons (PAHs), non-steroidal anti-inflammatory drugs (NSAIDs) and chiral compounds. The monolith prepared in the presence of c-SWNTs showed enhanced resolution of the text mixtures, including a remarkable capability to separate enantiomers.