RESUMEN
The band alignment of semiconductors, insulators, and dielectrics is relevant to diverse material properties and device structures utilizing their surfaces and interfaces. In particular, the ionization potential and electron affinity are fundamental quantities that describe surface-dependent band-edge positions with respect to the vacuum level. Their accurate and systematic determination, however, demands elaborate experiments or simulations for well-characterized surfaces. Here, we report machine learning for the band alignment of nonmetallic oxides using a high-throughput first-principles calculation data set containing about 3000 oxide surfaces. Our neural network accurately predicts the band positions for relaxed surfaces of binary oxides simply by using the information on bulk structures and surface termination planes. Moreover, we extend the model to naturally include multiple-cation effects and transfer it to ternary oxides. The present approach enables the band alignment of a vast number of solid surfaces, thereby opening the way to a systematic understanding and materials screening.
RESUMEN
The analysis of the diradical state of functional open-shell molecules is important for understanding their physical properties and chemical reactivity. The diradical character is an important factor in the functional elucidation and design of open-shell molecules. In recent years, attempts have been made to immobilise functional open-shell molecules on surfaces to form devices. However, the influence of surface interactions on the diradical state remains unclear. In this study, the physisorption structures of p-benzyne, which is a typical diradical molecule, on MgO(001) and SrO(001) surfaces are used as models to investigate how the diradical character is affected by physisorption. This is done using approximate spin-projected density functional theory calculations with dispersion correction and plane-wave basis (AP-DFT-D3/plane-wave calculations). The diradical character change (Δy) due to adsorption can be categorised into three factors, namely the change due to the distortion of the diradical molecule (Δydis), the interaction between neighbouring diradical molecules (Δycoh), and molecule-surface interactions (Δysurf). In all the calculated models, physisorption reduced the diradical character (Δy < 0), and the contribution of Δysurf was the largest among the three factors. The calculated results show that adsorption induces electron delocalisation to π-conjugated orbitals and intramolecular charge polarisation, both of which contribute to reducing the occupancy of singly occupied molecular orbitals. This indicates that the diradical character of p-benzyne is reduced by the stabilisation of the resonance structures. Furthermore, geometry optimisation of the surfaces shows that the chemical-soft surface (SrO) varies the diradical character more significantly than the chemical-hard surface (MgO). This study shows that the open-shell electronic state and stack structure of diradical molecules can be controlled through the analysis of the surface diradical state.
RESUMEN
Li2MnO3 is a promising cathode candidate for Li-ion batteries because of its high discharge capacity; however, its reaction mechanism during cycling has not been sufficiently explicated. Observations of Mn and O binding energy shifts in operando hard X-ray photoelectron spectroscopy measurements enabled us to determine the charge-compensation mechanism of Li2MnO3. The O 1s peak splits at an early stage during the first charge, and the concentration of lower-valence O changes reversibly with cycling, indicating the formation of a low-valence O species that intrinsically participates in the redox reaction. The O 1s peak-splitting behavior, which indicates the number of valences of O in Li2MnO3, is supported by the computational results for an O3 to O1 structural transition. This is in agreement with the results of our previous study, wherein we confirmed this O3 to O1 transition based on in situ surface X-ray diffraction analysis, X-ray photoelectron spectroscopy, and first-principles formation energy calculations.
RESUMEN
Spinel oxides are an important class of materials for heterogeneous catalysis including photocatalysis and electrocatalysis. The surface O vacancy formation energy (EOvac) is a critical quantity for catalyst performance because the surface of metal oxide catalysts often acts as a reaction site, for example, in the Mars-van Krevelen mechanism. However, experimental evaluation of EOvac is very challenging. We obtained the EOvac for (100), (110), and (111) surfaces of normal zinc-based spinel oxides ZnAl2O4, ZnGa2O4, ZnIn2O4, ZnV2O4, ZnCr2O4, ZnMn2O4, ZnFe2O4, and ZnCo2O4. The most stable surface is (100) for all compounds. The smallest EOvac for a surface is the largest in the (100) surface except for ZnCo2O4. For (100) and (110) surfaces, there is a good correlation, over all spinels, between the smallest EOvac for the surface and bulk formation energy, while the ionization potential correlates well in (111) surfaces. Machine learning over EOvac of all surface sites in all orientations and for all compounds to find the important factors, or descriptors, that decide the EOvac revealed that bulk and surface-dependent descriptors are the most important, namely the bulk formation energy, a Boolean descriptor of whether the surface is (111) or not, and the ionization potential, followed by geometrical descriptors that are different in each O site.
RESUMEN
Metal/oxide support perimeter sites are known to provide unique properties because the nearby metal changes the local environment on the support surface. In particular, the electron scavenger effect reduces the energy necessary for surface anion desorption, and thereby contributes to activation of the (reverse) Mars-van Krevelen mechanism. This study investigated the possibility of such activation in hydrides, carbides, nitrides, and sulfides. The work functions (WFs) of known hydrides, carbides, nitrides, oxides, and sulfides with group 3, 4, or 5 cations (Sc, Y, La, Ti, Zr, Hf, V, Nb, and Ta) were calculated. The WFs of most hydrides, carbides, and nitrides are smaller than the WF of Ag, implying that the electron scavenger effect may occur when late transition metal nanoparticles are adsorbed on the surface. The WF of oxides and sulfides decreases when reduced. The surface anion vacancy formation energy correlates well with the bulk formation energy in carbides and nitrides, while almost no correlation is found in hydrides because of the small range of surface hydrogen vacancy formation energy values. The electron scavenger effect is explicitly observed in nanorods adsorbed on TiH2 and Ti2O3; the surface vacancy formation energy decreases at anion sites near the nanorod, and charge transfer to the nanorod happens when an anion is removed at such sites. Activation of hydrides, carbides, and nitrides by nanorod adsorption and screening support materials through WF calculation are expected to open up a new category of supported catalysts.
RESUMEN
The ionization potential is a fundamental key quantity with great relevance to diverse material properties. We find that state of the art methods based on density functional theory and simple diagrammatic approaches as commonly taken in the GW approximation predict the ionization potentials of semiconductors and insulators unsatisfactorily. Good agreement between theory and experiment is obtained only when diagrams resulting from the antisymmetry of the many-electron wave function are taken into account via vertex corrections in the self-energy. The present approach describes both localized and delocalized states accurately, making it ideally suited for a wide class of materials and processes.
RESUMEN
Catalytic propane dehydrogenation (PDH) has mainly been studied using metal- and metal oxide-based catalysts. Studies on dehydrogenation catalysis by metal hydrides, however, have rarely been reported. In this study, PDH reactions using group IIIB and IVB metal hydride catalysts were investigated under relatively low-temperature conditions of 450 °C. Lanthanum hydride exhibited the lowest activation energy for dehydrogenation and the highest propylene yield. Based on kinetics studies, a comparison between the reported calculation results and isotope experiments, the hydrogen vacancies of metal hydrides were involved in low-temperature PDH reactions.
RESUMEN
This study proposes the unsaturated coordination index, σ, as a potential descriptor of the stability of metal-oxide surfaces cleaved from bulk. The value of σ, the number of missing bonds per unit area, can be obtained very quickly using only crystallographic data, namely, the bulk geometry. The surface energies of various binary oxides, with and without atom relaxation, were calculated. Their correlations with σ had good coefficients of determination (R2) values, particularly in high-symmetry crystals. The proposed descriptor is very useful for an initial evaluation of stable metal-oxide surfaces without conducting any surface model calculations.
RESUMEN
A change in the electronic spin state of the surfaces relevant to Li (de)intercalation of nanosized stoichiometric lithium cobalt oxide LiCo(III)O(2) from low-spin to intermediate and high spin is observed for the first time. These surfaces are the ones that are relevant for Li (de)intercalation. From density functional theory calculations with a Hubbard U correction, the surface energies of the layered lithium cobalt oxide can be significantly lowered as a consequence of the spin change. The crystal field splitting of Co d orbitals is modified at the surface due to missing Co-O bonds. The electronic spin transition also has a significant impact on Co(III)-Co(IV) redox potential, as revealed by the change in the lithium (de)intercalation voltage profile in a lithium half cell.
RESUMEN
Perovskite oxides comprise an important class of materials, and some of their applications depend on the surface reactivity characteristics. We calculated, using density functional theory, the surface O vacancy formation energy (E Ovac) for perovskite-structure oxides, with a transition metal (Ti-Fe) as the B-site cation, to estimate the catalytic reactivity of perovskite oxides. The E Ovac value correlated well with the band gap and bulk formation energy, which is a trend also found in other oxides. A low E Ovac value, which is expected to result in higher catalytic activity via the Mars-van Krevelen mechanism, was found in metallic perovskites such as CaCoO3, BaFeO3, and SrFeO3. On the other hand, titanates had high E Ovac values, typically exceeding 4 eV/atom, suggesting that these materials are less reactive when O vacancy formation is involved in the reaction mechanism.
RESUMEN
[This corrects the article DOI: 10.1021/acsomega.2c00702.].
RESUMEN
Material characterization that informs research and development of batteries is generally based on well-established ex situ and in situ experimental methods that do not consider the band structure. This is because experimental extraction of structural information for liquid-electrolyte batteries is extremely challenging. However, this hole in the available experimental data negatively affects the development of new battery systems. Herein, we determined the entire band structure of a model thin-film solid-state battery with respect to an absolute potential using operando hard X-ray photoelectron spectroscopy by treating the battery as a semiconductor device. We confirmed drastic changes in the band structure during charging, such as interfacial band bending, and determined the electrolyte potential window and overpotential location at high voltage. This enabled us to identify possible interfacial side reactions, for example, the formation of the decomposition layer and the space charge layer. Notably, this information can only be obtained by evaluating the battery band structure during operation. The obtained insights deepen our understanding of battery reactions and provide a novel protocol for battery design.
RESUMEN
Hydrogen spillover, the migration of dissociated hydrogen atoms from noble metals to their support materials, is a ubiquitous phenomenon and is widely utilized in heterogeneous catalysis and hydrogen storage materials. However, in-depth understanding of the migration of spilled hydrogen over different types of supports is still lacking. Herein, hydrogen spillover in typical reducible metal oxides, such as TiO2, CeO2, and WO3, was elucidated by combining systematic characterization methods involving various in situ techniques, kinetic analysis, and density functional theory calculations. TiO2 and CeO2 were proven to be promising platforms for the synthesis of non-equilibrium RuNi binary solid solution alloy nanoparticles displaying a synergistic promotional effect in the hydrolysis of ammonia borane. Such behaviour was driven by the simultaneous reduction of both metal cations under a H2 atmosphere over TiO2 and CeO2, in which hydrogen spillover favorably occurred over their surfaces rather than within their bulk phases. Conversely, hydrogen atoms were found to preferentially migrate within the bulk prior to the surface over WO3. Thus, the reductions of both metal cations occurred individually on WO3, which resulted in the formation of segregated NPs with no activity enhancement.
RESUMEN
We evaluated the structural change of the cathode material Li2MnO3 that was deposited as an epitaxial film with an (001) orientation in an all-solid-state battery. We developed an in situ surface X-ray diffraction (XRD) technique, where X-rays are incident at a very low grazing angle of 0.1°. An X-ray with wavelength of 0.82518 Å penetrated an â¼2 µm-thick amorphous Li3PO4 solid-state electrolyte and â¼1 µm-thick metal Li anode on the Li2MnO3 cathode. Experiments revealed a structural change to a high-capacity (activated) phase that proceeded gradually and continuously with cycling. The activated phase barely showed any capacity fading. First-principles calculations suggested that the activated phase has O1 stacking, which is attained by first delithiating to an intermediate phase with O3 stacking and tetrahedral Li. This intermediate phase has a low Li migration barrier path in the [001] direction, but further delithiation causes an energetically favorable and irreversible transition to the O1 phase. We propose a mechanism of structural change with cycling: charging to a high voltage at a sufficiently low Li concentration typically induces irreversible transition to a phase detrimental to cycling that could, but not necessarily, be accompanied by the dissolution of Mn and/or the release of O into the electrolyte, while a gradual irreversible transition to an activated phase happens at a similar Li concentration under a lower voltage.
RESUMEN
Daylight-driven photocatalysts have attracted much attention in the context of "green" technology. Although various active materials have been reported and their applications are rapidly increasing, many are discovered after enormous experimental efforts. Herein the discovery of a novel oxide photocatalyst, ß-SnMoO4, is demonstrated via a rational search of 3483 known and hypothetical compounds with various compositions and structures over the whole range of SnO-MO q/2 (M: Ti, Zr, and Hf (q = 4); V, Nb, and Ta (q = 5); Cr, Mo, and W (q = 6)) pseudobinary systems. Screening using thermodynamic stability, band gap, and band-edge positions by density functional theory calculations identifies ß-SnMoO4 as a potential target. Then a low temperature route is used to successfully synthesize the novel crystal, which is confirmed by X-ray powder diffraction and Mössbauer spectroscopy. ß-SnMoO4 is active for the photocatalytic decomposition of a methylene blue solution under daylight and its activity is comparable to a known photocatalyst, ß-SnWO4.
RESUMEN
Nitride semiconductors are attractive because they can be environmentally benign, comprised of abundant elements and possess favourable electronic properties. However, those currently commercialized are mostly limited to gallium nitride and its alloys, despite the rich composition space of nitrides. Here we report the screening of ternary zinc nitride semiconductors using first-principles calculations of electronic structure, stability and dopability. This approach identifies as-yet-unreported CaZn2N2 that has earth-abundant components, smaller carrier effective masses than gallium nitride and a tunable direct bandgap suited for light emission and harvesting. High-pressure synthesis realizes this phase, verifying the predicted crystal structure and band-edge red photoluminescence. In total, we propose 21 promising systems, including Ca2ZnN2, Ba2ZnN2 and Zn2PN3, which have not been reported as semiconductors previously. Given the variety in bandgaps of the identified compounds, the present study expands the potential suitability of nitride semiconductors for a broader range of electronic, optoelectronic and photovoltaic applications.
RESUMEN
A variety of proton (H(+))-conducting oxides are known, including those used in electrochemical devices such as fuel cells. In contrast, pure H(-) conduction, not mixed with electron conduction, has not been demonstrated for oxide-based materials. Considering that hydride ions have an ionic size appropriate for fast transport and also a strong reducing ability suitable for high-energy storage and conversion devices, we prepared a series of K2NiF4-type oxyhydrides, La(2-x-y)Sr(x + y)LiH(1-x + y)O(3-y), in the hope of observing such H(-) conductors. The performance of an all-solid-state TiH2/o-La2LiHO3 (x = y = 0, o: orthorhombic)/Ti cell provided conclusive evidence of pure H(-) conduction.
RESUMEN
To fully understand and control materials and their properties, it is of critical importance to determine their atomic structures in all three dimensions. Recent revolutionary advances in electron optics - the inventions of geometric and chromatic aberration correctors as well as electron source monochromators - have provided fertile ground for performing optical depth sectioning at atomic-scale dimensions. In this study we theoretically demonstrate the imaging of top/sub-surface atomic structures and identify the depth of single dopants, single vacancies and the other point defects within materials by large-angle illumination scanning transmission electron microscopy (LAI-STEM). The proposed method also allows us to measure specimen properties such as thickness or three-dimensional surface morphology using observations from a single crystallographic orientation.
RESUMEN
Extensive experimental work has been carried out to characterize the stable Na-vacancy ordering patterns at various compositions of layered Na(x)CoO(2). However, contradictions and debates prevail in the literature, particularly at high Na concentrations x>0.5. Understanding of the exotic electronic properties in this system requires a thorough understanding of the Na-vacancy structural orderings. Using density functional theory in the generalized gradient approximation (GGA), combined with a cluster expansion structure prediction algorithm we have found an intricate set of Na-vacancy ordered ground states in Na(x)CoO(2) (0.5< or =x< or =1). We demonstrate a newly predicted ordering pattern between 0.67< or =x< or =0.71. By comparing the first principles electronic structure methods within the GGA and GGA+U (Hubbard U correction) approximations, we demonstrate that at certain Na concentration the stable ordering is affected by charge localization on the Co layer through coupling between the Na and Co lattices.