Characterization of Streptomyces nymphaeiformis sp. nov., and its taxonomic relatedness to other polyhydroxybutyrate-degrading streptomycetes.

A polyhydroxybutyrate (PHB)-degrading actinomycete, strain SFB5AT, was identified as a species of Streptomyces based on its membrane fatty acid profile and the presence of ll-diaminopimelic acid in the cell wall. It formed sporulating mycelia on most agar media, but flat or wrinkled, moist colonies on trypticase soy agar. Spores were smooth, cylindrical, and borne on long, straight to flexuous chains. It produced a light brown diffusible pigment, but not melanin. Comparison of genomic digital DNA-DNA hybridization (dDDH) and average nucleotide identity (ANI) values indicated that strain SFB5AT was related to Streptomyces litmocidini JCM 4394T, Streptomyces vietnamensis GIMV4.0001T, Streptomyces nashvillensis JCM 4498T and Streptomyces tanashiensis JCM 4086T, plus 11 other species. However, the dDDH and ANI values were well below the species differentiation thresholds of <70 and <95 %, respectively; also, multilocus sequence analysis distances exceeded the species threshold of 0.007. Moreover, strain SFB5AT differed from the other species in pigmentation and its ability to catabolize arabinose. Strain SFB5AT and 11 of its 15 closest relatives degraded PHB and have genes for extracellular, short-chain-length denatured polyhydroxyalkanoate depolymerases. These enzymes from strain SFB5AT and its closest relatives had a type 1 catalytic domain structure, while those from other relatives had a type 2 structure, which differs from type one in the position of a consensus histidine in the active site. Thus, phenotypic and genotypic differences suggest that strain SFB5AT represents a new species of Streptomyces, for which we propose the name Streptomyces nymphaeiformis sp. nov. The type strain is SFB5AT (=NRRL B-65520T=DSM 112030T).

Luminescent and Proton Conducting Lanthanide Coordination Networks Based On a Zwitterionic Tripodal Triphosphonate.

The synthesis, structural characterization, luminescence properties, and proton conduction performance of a new family of isostructural cationic 2D layered compounds are reported. These have the general formula [Ln(H4NMP)(H2O)2]Cl·2H2O [Ln = La(3+), Pr(3+), Sm(3+), Eu(3+), Gd(3+), Tb(3+), Dy(3+), Ho(3+), H6NMP = nitrilotris(methylphosphonic acid)], and contain Cl(-) as the counterion. In the case of Ce(3+), a 1D derivative, [Ce2(H3NMP)2(H2O)4]·4.5H2O, isostructural with the known lanthanum compound has been isolated by simply crystallization at room temperature. The octa-coordinated environment of Ln(3+) in 2D compounds is composed by six oxygen atoms from three different ligands and two oxygens from each bound water. Two of the three phosphonate groups act as both chelating and bridging linkers, while the third phosphonate group acts solely as a bridging moiety. The materials are stable at low relative humidity at less at 170 °C. However, at high relative humidity transform to other chloride-free phases, including the 1D structure. The proton conductivity of the 1D materials varies in a wide range, the highest values corresponding to the La derivative (σ ≈ 2 × 10(-3) S·cm(-1) at RH 95% and 80 °C). A lower proton conductivity, 3 × 10(-4) S·cm(-1), was measured for [Gd(H4NMP)(H2O)2]Cl·2H2O at 80 °C, which remains stable under the work conditions used. Absorption and luminescence spectra were recorded for selected [Ln(H4NMP)(H2O)2]Cl·2H2O compounds. In all of them, the observed transitions are attributed solely to f-f transitions of the lanthanide ions present, as the H4NMP(2-) organic group has no measurable absorption or luminescence properties.

Silver-based hybrid materials from meta- or para-phosphonobenzoic acid: influence of the topology on silver release in water.

Three novel silver-based metal-organic frameworks materials, which were synthesized from either 3-phosphono or 4-phosphonobenzoic acid and silver nitrate, are reported. The novel hybrids were synthesized under hydrothermal conditions; the pH of the reaction media was controlled by adding different quantities of urea thereby producing different topologies. Compound 1 (Ag3(4-PO3-C6H4-COO)), synthesized in the presence of urea, exhibits a compact 3D structure in which both phosphonic acid and carboxylic acid functional groups are linked to the silver-based inorganic network. Compound 2 (Ag(4-PO3H-C6H4-COOH)), which was synthesized at lower pH (without urea), has a layered structure in which only the phosphonic acid functional groups from 4-phosphonobenzoic acid moieties are linked to the silver inorganic network; the carboxylic acid groups being engaged in hydrogen bonds. Finally, material 3 (Ag(3-PO3H-C6H4-COOH)) was synthesized from 3-phosphonobenzoic acid and silver nitrate without urea. This material 3 features a layered structure exhibiting carboxylic acid functional groups linked via hydrogen bonds in the interlayer space. After the full characterization of these materials (single X-ray structure, IR, TGA), their ability to release silver salts in aqueous environment was measured. Silver release, determined in aqueous solution by cathodic stripping voltammetry, shows that the silver release capacity of these materials is dependent on the topology of the hybrids. The more compact structure 1 is extremely stable in water with only trace levels of silver ions being detected. On the other hand, compounds 2 and 3, in which only the phosphonic acid functional groups were bonded to the inorganic network, released larger quantities of silver ions into aqueous solution. These results which were compared with the silver release of the previously described compound 4 (Ag6(3-PO3-C6H4-COO)2). The results clearly show that the release capacity of silver-based metal organic framework can be tuned by modifying their topology which, in the present study, is governed by the regio-isomer of the organic precursor and the synthetic conditions under which the hybrids are prepared.

Structural variability in multifunctional metal xylenediaminetetraphosphonate hybrids.

Two new families of divalent metal hybrid derivatives from the aromatic tetraphosphonic acids 1,4- and 1,3-bis(aminomethyl)benzene-N,N'-bis(methylenephosphonic acid), (H2O3PCH2)2-N-CH2C6H4CH2-N(CH2PO3H2)2 (designated herein as p-H8L and m-H8L) have been synthesized by crystallization at room temperature and hydrothermal conditions. The crystal structures of M[(HO3PCH2)2N(H)CH2C6H4CH2N(H)(CH2PO3H)2(H2O)2]·2H2O (M = Mg, Co, and Zn), M-(p-H6L), and M[(HO3PCH2)2N(H)CH2C6H4CH2N(H)(CH2PO3H)2]·nH2O (M = Ca, Mg, Co, and Zn and n = 1-1.5), M-(m-H6L), were solved ab initio by synchrotron powder diffraction data using the direct methods and subsequently refined using the Rietveld method. The crystal structure of the isostructural M-(p-H6L) is constituted by organic-inorganic monodimensional chains where the phosphonate moiety acts as a bidentate chelating ligand bridging two metal octahedra. M-(m-H6L) compounds exhibit a 3D pillared open-framework with small 1D channels filled with water molecules. These channels are formed by the pillaring action of the organic ligand connecting adjacent layers through the phosphonate oxygens. Thermogravimetric and X-ray thermodiffraction analyses of M-(p-H6L) showed that the integrity of their crystalline structures is maintained up to 470 K, without significant reduction of water content, while thermal decomposition takes place above 580 K. The utility of M-(p-H6L) (M = Mg and Zn) hybrid materials in corrosion protection was investigated in acidic aqueous solutions. In addition, the impedance data indicate both families of compounds display similar proton conductivities (σ ∼ 9.4 × 10(-5) S·cm(-1), at 98% RH and 297 K), although different proton transfer mechanisms are involved.

Structural study of hydrated/dehydrated manganese thiophene-2,5-diphosphonate metal organic frameworks, Mn2(O3P-C4H2S-PO3)·2H2O.

Synthesis of thiophene-2,5-diphosphonic acid 2 is reported, and its use for synthesis of the original pristine materials Mn(2)(O(3)P-C(4)H(2)S-PO(3))·2H(2)O 3 is reported. The structure of material 3 has been fully resolved from single-crystal X-ray diffraction. Mn(2)(O(3)P-C(4)H(2)S-PO(3))·2H(2)O 3 crystallizes in a monoclinic cell (space group P2) with the following parameters: a = 11.60(1) Å, b = 4.943(5) Å, c = 19.614(13) Å, ß = 107.22°. A noticeable feature of the structure of compound 3 is the orientation of the thiophene heterocycles that adopt two different orientations in two successive layers (along c). Thermal analysis of compound 3 indicates that the water molecules are easily removed from 160 to 230 °C while the dehydrated structure is stable up to 500 °C. The dehydrated compound obtained from 3 can be rehydrated to give the polymorphic compound Mn(2)(O(3)P-C(4)H(2)S-PO(3))·2H(2)O 4, which crystallizes in an orthorhombic cell (space group Pnam) with the following parameters: a = 7.5359(3) Å, b = 7.5524(3) Å, c = 18.3050(9) Å. The main difference between the structures of 3 and 4 arises from both the orientation of the thiophene rings (herringbone-type organization in 4) and the structure of the inorganic layers. The thiophene-2,5-diphosphonic acid moieties engaged in materials 3 and 4 adopt a different orientation likely due to rotation around the P-C bonds and via the dehydrated state 5, which is likely more flexible than the hydrated states. Study of the magnetic properties performed on compound 3 and 4 and on the dehydrated compounds Mn(2)(O(3)P-C(4)H(2)S-PO(3)) 5 complemented by the structural study has permitted us to characterize the antiferromagnetic ground state of sample 3, a weak ferromagnetic component in sample 4, and complete paramagnetic behavior in sample 5.

Divalent metal vinylphosphonate layered materials: compositional variability, structural peculiarities, dehydration behavior, and photoluminescent properties.

A family of M-VP (M = Ni, Co, Cd, Mn, Zn, Fe, Cu, Pb; VP = vinylphosphonate) and M-PVP (M = Co, Cd; PVP = phenylvinylphosphonate) materials have been synthesized by hydrothermal methods and characterized by FT-IR, elemental analysis, and thermogravimetric analysis (TGA). Their structures were determined either by single crystal X-ray crystallography or from laboratory X-ray powder diffraction data. The crystal structure of some M-VP and M-PVP materials is two-dimensional (2D) layered, with the organic groups (vinyl or phenylvinyl) protruding into the interlamellar space. However, the Pb-VP and Cu-VP materials show dramatically different structural features. The porous, three-dimensional (3D) structure of Pb-VP contains the Pb center in a pentagonal pyramid. A Cu-VP variant of the common 2D layered structure shows a very peculiar structure. The structure of the material is 2D with the layers based upon three crystallographically distinct Cu atoms; an octahedrally coordinated Cu(2+) atom, a square planar Cu(2+) atom and a Cu(+) atom. The latter has an unusual co-ordination environment as it is 3-coordinated to two oxygen atoms with the third bond across the double bond of the vinyl group. Metal-coordinated water loss was studied by TGA and thermodiffractometry. The rehydration of the anhydrous phases to give the initial phase takes place rapidly for Cd-PVP but it takes several days for Co-PVP. The M-VP materials exhibit variable dehydration-rehydration behavior, with most of them losing crystallinity during the process.

Phase Transformation Dynamics in Sulfate-Loaded Lanthanide Triphosphonates. Proton Conductivity and Application as Fillers in PEMFCs.

Phase transformation dynamics and proton conduction properties are reported for cationic layer-featured coordination polymers derived from the combination of lanthanide ions (Ln3+) with nitrilo-tris(methylenephosphonic acid) (H6NMP) in the presence of sulfate ions. Two families of materials are isolated and structurally characterized, i.e., [Ln2(H4NMP)2(H2O)4](HSO4)2·nH2O (Ln = Pr, Nd, Sm, Eu, Gd, Tb, Er, Yb; n = 4-5, Series I) and [Ln(H5NMP)]SO4·2H2O (Ln = Pr, Nd, Eu, Gd, Tb; Series II). Eu/Tb bimetallic solid solutions are also prepared for photoluminescence studies. Members of families I and II display high proton conductivity (10-3 and 10-2 S·cm-1 at 80 °C and 95% relative humidity) and are studied as fillers for Nafion-based composite membranes in PEMFCs, under operating conditions. Composite membranes exhibit higher power and current densities than the pristine Nafion membrane working in the range of 70-90 °C and 100% relative humidity and with similar proton conductivity.

Ethane-1,1,2-trisphosphonic acid hemihydrate.

Ethane-1,1,2-trisphosphonic acid crystallizes as a hemihydrate, C(2)H(9)O(9)P(3).0.5H(2)O, in which the water O atom lies on an inversion centre in the space group P2(1)/c. The acid component, which contains a short but noncentred O-H...O hydrogen bond, adopts a gauche conformation. The acid components are linked by an extensive series of O-H...O hydrogen bonds to form layers, which are linked into pairs by the water molecules.

Tailoring the photoluminescence properties of transition metal phosphonates.

A series of phenylphosphonates, Zn(1-x)Mn(x)(O(3)PC(6)H(5)) x H(2)O, where x = 0, 0.005, 0.25, 0.5, 0.75 and 1.0, has been prepared and their photoluminescence responses studied. The presence of Mn in the sample results in a red emission, whilst when x = 0 the emission is green. Levels of Mn <1 mol% result in an orange emission. Ag(6)(m-O(3)PC(6)H(4)CO(2))(2) has been prepared by hydrothermal reaction of Ag(NO(3)) and m-phosphonobenzoic acid. The material has a 1D channel structure in which the channels are lined with the phenyl groups. Ag(6)(m-O(3)PC(6)H(4)CO(2))(2) shows a green luminescence response to laser excitation, whilst the related Zn material, Zn(3)(m-O(3)PC(6)H(4)CO(2))(2), shows an unusual yellow emission.

Remarkable thermal stability of Eu(4-phosphonobenzoate): structure investigations and luminescence properties.

A new 3D rare-earth hybrid material Eu(p-O(3)PC(6)H(4)COO) has been synthesised by a hydrothermal route from Eu(NO(3))(3) x 5 H(2)O and the rigid precursor, 4-phosphonobenzoic acid. The structure of Eu(p-O(3)PC(6)H(4)COO) has been solved by X-ray diffraction on a powder sample and is described as an inorganic network in which both carboxylic and phosphonic acid groups are linked to Eu ions forming a three-dimensional architecture. Thermal analysis performed on this compound has underlined its remarkable stability up to 510 degrees C and an optical study has been conducted to examine its luminescence properties that have been related to the structure of the material. The structural and luminescence properties have also been compared with the related material Eu phenylphosphonate.

Crystal chemistry and electronic structure of the metallic lithium ion conductor, LiNiN.

The layered ternary nitride LiNiN shows an interesting combination of fast Li+ ion diffusion and metallic behavior, properties which suggest potential applications as an electrode material in lithium ion batteries. A detailed investigation of the structure and properties of LiNiN using powder neutron diffraction, ab initio calculations, SQUID magnetometry, and solid-state NMR is described. Variable-temperature neutron diffraction demonstrates that LiNiN forms a variant of the parent Li3N structure in which Li+ ion vacancies are ordered within the [LiN] planes and with Ni exclusively occupying interlayer positions (at 280 K: hexagonal space group Pm2, a = 3.74304(5) A, c = 3.52542(6) A, Z = 1). Calculations suggest that LiNiN is a one-dimensional metal, as a result of the mixed pi- and sigma-bonding interactions between Ni and N along the c-axis. Solid-state 7Li NMR spectra are consistent with both fast Li+ motion and metallic behavior.

Evolution of structure, transport properties and magnetism in ternary lithium nitridometalates Li(3-x-y)M(x)N, M = Co, Ni, Cu.

The structures, magnetism and ion transport properties of the ternary nitrides Li(3-x-y)M(x)N (M = Co, Ni, Cu; y= lithium vacancy) were examined by powder X-ray diffraction, solid-state NMR and SQUID magnetometry. Doping levels are achieved up to x approximately = 0.4 for M = Cu and Co, but much higher substitution levels (x approximately =1) are obtained in the Li-Ni-N system. Transition metals substitute for Li at the Li(1) interplanar site and the ensuing lithium vacancies are disordered within the [Li(2)N] planes. High substitution levels in the Li-Ni-N system lead to the formation of ordered phases. Diffusion parameters, including activation energies, correlation times and diffusion coefficients, were obtained from variable-temperature solid-state NMR measurements in several ternary compounds. SQUID magnetometry shows significant variations of the electronic properties with dopant and x. The properties of the ternary nitrides can be rationalised in terms of the identity of the dopant and the structural modifications arising from the substitution process.

Fast lithium ion diffusion in the ternary layered nitridometalate LiNiN.

The structure, Li+ diffusion dynamics, and magnetic properties of the layered nitridonickelate(II), LiNiN, have been investigated by powder X-ray diffraction, 7Li solid-state NMR, and SQUID magnetometry and compared and contrasted with those of the Li+ fast ion conductor, Li3N. The replacement of Li+ by Ni2+ with concomitant generation of Li+ vacancies has profound effects on ionic diffusion and electronic properties. The nitridonickelate, akin to its binary parent, displays rapid Li+ ion diffusion but, by contrast, the diffusion process is confined only to the Li-N planes. Further, replacement of Li by Ni leads to a transition from semiconducting to metallic behavior, likely mediated through the creation of infinite, 1D Ni-N chains of increased covalency.