Endothelial cell repopulation after stenting determines in-stent neointima formation: effects of bare-metal vs. drug-eluting stents and genetic endothelial cell modification.

AIMS: Understanding endothelial cell repopulation post-stenting and how this modulates in-stent restenosis is critical to improving arterial healing post-stenting. We used a novel murine stent model to investigate endothelial cell repopulation post-stenting, comparing the response of drug-eluting stents with a primary genetic modification to improve endothelial cell function. METHODS AND RESULTS: Endothelial cell repopulation was assessed en face in stented arteries in ApoE(-/-) mice with endothelial-specific LacZ expression. Stent deployment resulted in near-complete denudation of endothelium, but was followed by endothelial cell repopulation, by cells originating from both bone marrow-derived endothelial progenitor cells and from the adjacent vasculature. Paclitaxel-eluting stents reduced neointima formation (0.423 ± 0.065 vs. 0.240 ± 0.040 mm(2), P = 0.038), but decreased endothelial cell repopulation (238 ± 17 vs. 154 ± 22 nuclei/mm(2), P = 0.018), despite complete strut coverage. To test the effects of selectively improving endothelial cell function, we used transgenic mice with endothelial-specific overexpression of GTP-cyclohydrolase 1 (GCH-Tg) as a model of enhanced endothelial cell function and increased NO production. GCH-Tg ApoE(-/-) mice had less neointima formation compared with ApoE(-/-) littermates (0.52 ± 0.08 vs. 0.26 ± 0.09 mm(2), P = 0.039). In contrast to paclitaxel-eluting stents, reduced neointima formation in GCH-Tg mice was accompanied by increased endothelial cell coverage (156 ± 17 vs. 209 ± 23 nuclei/mm(2), P = 0.043). CONCLUSION: Drug-eluting stents reduce not only neointima formation but also endothelial cell repopulation, independent of strut coverage. In contrast, selective targeting of endothelial cell function is sufficient to improve endothelial cell repopulation and reduce neointima formation. Targeting endothelial cell function is a rational therapeutic strategy to improve vascular healing and decrease neointima formation after stenting.

In vitro and in vivo effects of the probiotic Escherichia coli strain M-17: immunomodulation and attenuation of murine colitis.

We examined the in vitro and in vivo effects of a probiotic, Escherichia coli strain M-17 (EC-M17), on NF-kappaB signalling, cytokine secretion and efficacy in dextran sulfate sodium (DSS)-induced murine colitis. NF-kappaB signalling was assessed using an NF-kappaB luciferase reporter cell line that was stimulated with TNF-alpha (100 ng/ml). p65 Nuclear binding and cytokine secretion (TNF-alpha, IL-1beta and IL-6) were evaluated using a RAW 264.7 macrophage cell line that was exposed to lipopolysaccharide (LPS; 5 microg/ml). Mice were administered vehicle, EC-M17, metronidazole, or EC-M17 plus metronidazole for 13 d. During the final 6 d, mice also received 2 % DSS. Parameters evaluated included disease activity index (DAI), histology, myeloperoxidase and NF-kappaB p65. EC-M17 dose dependently inhibited TNF-alpha-induced NF-kappaB signalling. At 5 x 109 colony-forming units/ml, EC-M17 inhibited NF-kappaB by >95 %. LPS-induced nuclear p65 binding was significantly inhibited (78 %; P 90 %) the LPS-induced secretion of TNF-alpha, IL-1beta and IL-6. In mice with DSS-induced colitis, EC-M17, metronidazole, and EC-M17 plus metronidazole significantly reduced DAI and colonic histology scores. Both EC-M17 and metronidazole reduced colonic IL-12, IL-6, IL-1beta and interferon-gamma. The combination of EC-M17 plus metronidazole resulted in more substantial cytokine reductions than were found with either treatment alone, and combination therapy significantly (P < 0.05 in both cases) reduced IL-1beta compared with EC-M17 and colonic histology scores compared with metronidazole. Alone, and in combination with metronidazole, EC-M17 improved murine colitis, probably due to an inhibitory effect on NF-kappaB signalling.

Recommendations for nanomedicine human subjects research oversight: an evolutionary approach for an emerging field.

The nanomedicine field is fast evolving toward complex, "active," and interactive formulations. Like many emerging technologies, nanomedicine raises questions of how human subjects research (HSR) should be conducted and the adequacy of current oversight, as well as how to integrate concerns over occupational, bystander, and environmental exposures. The history of oversight for HSR investigating emerging technologies is a patchwork quilt without systematic justification of when ordinary oversight for HSR is enough versus when added oversight is warranted. Nanomedicine HSR provides an occasion to think systematically about appropriate oversight, especially early in the evolution of a technology, when hazard and risk information may remain incomplete. This paper presents the consensus recommendations of a multidisciplinary, NIH-funded project group, to ensure a science-based and ethically informed approach to HSR issues in nanomedicine, and to integrate HSR analysis with analysis of occupational, bystander, and environmental concerns. We recommend creating two bodies, an interagency Human Subjects Research in Nanomedicine (HSR/N) Working Group and a Secretary's Advisory Committee on Nanomedicine (SAC/N). HSR/N and SAC/N should perform 3 primary functions: (1) analysis of the attributes and subsets of nanomedicine interventions that raise HSR challenges and current gaps in oversight; (2) providing advice to relevant agencies and institutional bodies on the HSR issues, as well as federal and federal-institutional coordination; and (3) gathering and analyzing information on HSR issues as they emerge in nanomedicine. HSR/N and SAC/N will create a home for HSR analysis and coordination in DHHS (the key agency for relevant HSR oversight), optimize federal and institutional approaches, and allow HSR review to evolve with greater knowledge about nanomedicine interventions and greater clarity about attributes of concern.

Effect of the coating morphology on the drug release from engineered drug-polymer nanocomposites.

The ElectroNanospray process (Nanocopoeia, Inc) transforms drugs and polymers into many nanoscale material states including powders, liquids, encapsulated particles, and coatings. This enabling technology platform allows application of polymers and drugs to the surface of medical devices such as coronary stents in a single-stage process. Modification of ElectroNanospray process parameters resulted in surface coatings with rich morphologies ranging in appearance from smooth and heterogeneous to highly porous and rough (open matrix). The traditional approach of measuring percent release over time by HPLC shows that the drug release profiles change significantly with coating morphology. In this study, we employed high resolution imaging techniques such as SEM, Atomic Force Microscopy (AFM) and Confocal Raman Microscopy to elucidate the drug release process on these coatings in situ, indicating a correlation of release kinetics with coating morphology.

Multimodal dynamic imaging of therapeutic biomedical coatings in aqueous medium.

Drug release from therapeutic biomedical films such as drug-polymer composite coatings on drug eluting stents is a highly complex and poorly understood process. The dynamics of drug release and the evolution of surface morphology during release have direct impact on the performance of the device. This information is not easily accessible, and there have been few systematic studies to investigate drug release from biomedical coatings in real time. In this study, the complementary analytical techniques of confocal Raman microscopy, in-liquid atomic force microscopy, scanning electron microscopy, and high performance liquid chromatography were used to examine real-time mobilization and release of the drug rapamycin from polyisobutylene-block-polystyrene thin films, during immersion in buffered saline for 12 h. Each technique was found to have distinct limitations in either temporal or spatial resolution; in combination, however, the overlapping techniques provided a level of detail that is not available using any single approach.

Drug-eluting stent coatings.

This paper reviews the development of coronary stents from a polymer scientist's view point, and presents the first results of an interdisciplinary team assembled for the development of new stent systems. Poly(styrene-b-isobutylene-b-styrene) block copolymer (SIBS), a nanostructured thermoplastic elastomer, is used in clinical practice as the drug-eluting polymeric coating on the Taxus coronary stent (trademark of Boston Scientific Co.). Our group has been developing new architectures comprising of arborescent (dendritic) polyisobutylene cores (D_SIBS), which were shown to be as biocompatible as SIBS. ElectroNanospray (Nanocopoeia Inc.) was used to coat test coupons and coronary stents with selected D(S)IBS polymers loaded with dexamethasone, a model drug. The surface topology varied from smooth to nanosized particulate coating. This paper will demonstrate how drug release profiles were influenced by both the molecular weight of the polyisobutylene core and spraying conditions of the polymer-drug mixture.