Full-length human cytomegalovirus terminase pUL89 adopts a two-domain structure specific for DNA packaging.

A key step in replication of human cytomegalovirus (HCMV) in the host cell is the generation and packaging of unit-length genomes into preformed capsids. The enzymes involved in this process are the terminases. The HCMV terminase complex consists of two terminase subunits, the ATPase pUL56 and the nuclease pUL89. A potential third component pUL51 has been proposed. Even though the terminase subunit pUL89 has been shown to be essential for DNA packaging and interaction with pUL56, it is not known how pUL89 mechanistically achieves sequence-specific DNA binding and nicking. To identify essential domains and invariant amino acids vis-a-vis nuclease activity and DNA binding, alanine substitutions of predicted motifs were analyzed. The analyses indicated that aspartate 463 is an invariant amino acid for the nuclease activity, while argine 544 is an invariant aa for DNA binding. Structural analysis of recombinant protein using electron microscopy in conjunction with single particle analysis revealed a curvilinear monomer with two distinct domains connected by a thinner hinge-like region that agrees well with the predicted structure. These results allow us to model how the terminase subunit pUL89's structure may mediate its function.

Cd(II)- and Pb(II)-Induced Self-Assembly of Peripheral Membrane Domains from Protein Kinase C.

Cd2+ and Pb2+ are xenobiotic heavy metal ions that use ionic mimicry to interfere with the cellular function of biomacromolecules. Using a combination of SAXS, electron microscopy, FRET, and solution NMR spectroscopy, we demonstrate that treatment with Cd2+ and Pb2+ causes self-assembly of protein kinase C regulatory domains that peripherally associate with membranes. The self-assembly process successfully competes with ionic mimicry and is mediated by conserved protein regions that are distinct from the canonical Ca2+-binding motifs of protein kinase C. The ability of protein oligomers to interact with anionic membranes is enhanced compared to the monomeric species. Our findings suggest that metal-ion-dependent peripheral membrane domains can be utilized for generating protein-metal-ion nanoclusters and serve as biotemplates for the design of sequestration agents.

The chloroplast division protein ARC6 acts to inhibit disassembly of GDP-bound FtsZ2.

Chloroplasts host photosynthesis and fulfill other metabolic functions that are essential to plant life. They have to divide by binary fission to maintain their numbers throughout cycles of cell division. Chloroplast division is achieved by a complex ring-shaped division machinery located on both the inner (stromal) and the outer (cytosolic) side of the chloroplast envelope. The inner division ring (termed the Z ring) is formed by the assembly of tubulin-like FtsZ1 and FtsZ2 proteins. ARC6 is a key chloroplast division protein that interacts with the Z ring. ARC6 spans the inner envelope membrane, is known to stabilize or maintain the Z ring, and anchors the Z ring to the inner membrane through interaction with FtsZ2. The underlying mechanism of Z ring stabilization is not well-understood. Here, biochemical and structural characterization of ARC6 was conducted using light scattering, sedimentation, and light and transmission EM. The recombinant protein was purified as a dimer. The results indicated that a truncated form of ARC6 (tARC6), representing the stromal portion of ARC6, affects FtsZ2 assembly without forming higher-order structures and exerts its effect via FtsZ2 dynamics. tARC6 prevented GDP-induced FtsZ2 disassembly and caused a significant net increase in FtsZ2 assembly when GDP was present. Single particle analysis and 3D reconstruction were performed to elucidate the structural basis of ARC6 activity. Together, the data reveal that a dimeric form of tARC6 binds to FtsZ2 filaments and does not increase FtsZ polymerization rates but rather inhibits GDP-associated FtsZ2 disassembly.

Chloroplast division protein ARC3 acts on FtsZ2 by preventing filament bundling and enhancing GTPase activity.

Chloroplasts evolved from cyanobacterial endosymbiotic ancestors and their division is a complex process initiated by the assembly of cytoskeletal FtsZ (Filamentous temperature sensitive Z) proteins into a ring structure at the division site (Z-ring). The cyanobacterial Z-ring positioning system (MinCDE proteins) is also conserved in chloroplasts, except that MinC was lost and replaced by the eukaryotic ARC3 (accumulation and replication of chloroplasts). Both MinC and ARC3 act as negative regulators of FtsZ assembly, but ARC3 bears little sequence similarity with MinC. Here, light scattering assays, co-sedimentation, GTPase assay and transmission electron microscopy in conjunction with single-particle analysis have been used to elucidate the structure of ARC3 and its effect on its main target in chloroplast division, FtsZ2. Analysis of FtsZ2 in vitro assembly reactions in the presence and absence of GMPCPP showed that ARC3 promotes FtsZ2 debundling and disassembly of existing filaments in a concentration-dependent manner and requires GTP hydrolysis. Three-dimensional reconstruction of ARC3 revealed an almost circular molecule in which the FtsZ-binding N-terminus and the C-terminal PARC6 (paralog of ARC6)-binding MORN (Membrane Occupation and Recognition Nexus) domain are in close proximity and suggest a model for PARC6-enabled binding of ARC3 to FtsZ2. The latter is corroborated by in vivo data.

Stable micron-scale holes are a general feature of canonical holins.

At a programmed time in phage infection cycles, canonical holins suddenly trigger to cause lethal damage to the cytoplasmic membrane, resulting in the cessation of respiration and the non-specific release of pre-folded, fully active endolysins to the periplasm. For the paradigm holin S105 of lambda, triggering is correlated with the formation of micron-scale membrane holes, visible as interruptions in the bilayer in cryo-electron microscopic images and tomographic reconstructions. Here we report that the size distribution of the holes is stable for long periods after triggering. Moreover, early triggering caused by an early lysis allele of S105 formed approximately the same number of holes, but the lesions were significantly smaller. In contrast, early triggering prematurely induced by energy poisons resulted in many fewer visible holes, consistent with previous sizing studies. Importantly, the unrelated canonical holins P2 Y and T4 T were found to cause the formation of holes of approximately the same size and number as for lambda. In contrast, no such lesions were visible after triggering of the pinholin S(21) 68. These results generalize the hole formation phenomenon for canonical holins. A model is presented suggesting the unprecedentedly large size of these holes is related to the timing mechanism.

FtsZ1/FtsZ2 Turnover in Chloroplasts and the Role of ARC3.

Chloroplast division requires filamentation temperature-sensitive Z (FtsZ), a tubulin-like GTPase of cyanobacterial endosymbiotic origin. Plants and algae possess two distinct FtsZ protein families, FtsZ1 and FtsZ2 that co-assemble into a ring (Z-ring) at the division site. Z-ring assembly and disassembly and division site positioning is controlled by both positive and negative factors via their specific interactions with FtsZ1 and FtsZ2. Here we present the in planta analysis of Arabidopsis FtsZ1 and FtsZ2 turnover in the context of a native chloroplast division machinery. Fluorescence recovery after photobleaching analysis was conducted using fluorescently tagged FtsZ at wild-type (WT)-like levels. Rapid photobleaching, low signal-to-noise ratio, and phototropic movements of chloroplasts were overcome by (i) using progressive intervals in time-lapse imaging, (ii) analyzing epidermal rather than stromal chloroplasts, and (iii) employing image stack alignment during postprocessing. In plants of WT background, fluorescence recovery half-times averaged 117 and 325 s for FtsZ1 and FtsZ2, respectively. In plants lacking ARC3, the key negative regulator of FtsZ assembly, the turnover was threefold slower. The findings are discussed in the context of previous results conducted in a heterologous system.

Cold-microwave enhanced enzyme-linked immunosorbent assays--a path to high-throughput clinical diagnostics.

The enzyme-linked immunosorbent assay (ELISA) constitutes an important clinical diagnostic approach. However, the prolonged incubation times involved lead to turnaround times of typically ⩾1 day, potentially delaying a definitive diagnosis or an adequate treatment plan for individual patients. Here cold-microwave technology (CMT) was employed to significantly reduce the times required for diagnostic ELISAs. The new approach was validated and compared to a conventional ELISA setup measuring canine calprotectin (cCP). Canine serum and fecal specimens were used for the analytical validation of cCP ELISA by conventional and CMT-ELISA. Cross-validation of both ELISA methods consisted of the determination of analytic sensitivity, linearity, accuracy, precision, and reproducibility. The long-term stability of antibody-coated ELISA plates was also evaluated up to 33 days. The ELISA approaches were comparable to each other. The observed-to-expected ratios for linearity and accuracy were 100.2±11.8 and 98.1±10.8% (mean±standard deviation), respectively. Precision and reproducibility were ⩽17.2%. For samples run on precoated ELISA plates over 33 days %CVs were ⩽12.5%. While both ELISA approaches were analytically sensitive, linear, accurate, precise, and reproducible with measurements of cCP concentrations, CMT-ELISA offered a reduction in incubation times by 90-95%, facilitating a very fast turnaround time and suggesting CMT-ELISA for improved human and veterinary clinical diagnostics.

Holin triggering in real time.

During λ infections, the holin S105 accumulates harmlessly in the membrane until, at an allele-specific time, suddenly triggering to form irregular holes of unprecedented size (>300 nm), releasing the endolysin from the cytoplasm, resulting in lysis within seconds. Here we used a functional S105-GFP chimera and real-time deconvolution fluorescence microscopy to show that the S105-GFP fusion accumulated in a uniformly distributed fashion, until suddenly, within 1 min, it formed aggregates, or rafts, at the time of lethal triggering. Moreover, the isogenic fusion to a nonlethal S105 mutant remained uniformly distributed, whereas a fusion to an early-lysing mutant showed early triggering and early raft formation. Protein accumulation rates of the WT, early, and nonlethal alleles were identical. Fluorescence recovery after photobleaching (FRAP) revealed that the nonlethal mutant and untriggered WT hybrids were highly mobile in the membrane, whereas the WT raft was essentially immobile. Finally, an antiholin allele, S105(ΔTMD1)-mcherryfp, in the product of which the S105 sequence deleted for the first transmembrane domain was fused to mCherryFP. This hybrid retained full antiholin activity, in that it blocked lethal hole formation by the S105-GFP fusion, accumulated uniformly throughout the host membrane and prevented the S105-GFP protein from forming rafts. These findings suggest that phage lysis occurs when the holin reaches a critical concentration and nucleates to form rafts, analogous to the initiation of purple membrane formation after the induction of bacteriorhodopsin in halobacteria. This model for holin function may be relevant for processes in mammalian cells, including the release of nonenveloped viruses and apoptosis.

Colony organization in the green alga Botryococcus braunii (Race B) is specified by a complex extracellular matrix.

Botryococcus braunii is a colonial green alga whose cells associate via a complex extracellular matrix (ECM) and produce prodigious amounts of liquid hydrocarbons that can be readily converted into conventional combustion engine fuels. We used quick-freeze deep-etch electron microscopy and biochemical/histochemical analysis to elucidate many new features of B. braunii cell/colony organization and composition. Intracellular lipid bodies associate with the chloroplast and endoplasmic reticulum (ER) but show no evidence of being secreted. The ER displays striking fenestrations and forms a continuous subcortical system in direct contact with the cell membrane. The ECM has three distinct components. (i) Each cell is surrounded by a fibrous ß-1, 4- and/or ß-1, 3-glucan-containing cell wall. (ii) The intracolonial ECM space is filled with a cross-linked hydrocarbon network permeated with liquid hydrocarbons. (iii) Colonies are enclosed in a retaining wall festooned with a fibrillar sheath dominated by arabinose-galactose polysaccharides, which sequesters ECM liquid hydrocarbons. Each cell apex associates with the retaining wall and contributes to its synthesis. Retaining-wall domains also form "drapes" between cells, with some folding in on themselves and penetrating the hydrocarbon interior of a mother colony, partitioning it into daughter colonies. We propose that retaining-wall components are synthesized in the apical Golgi apparatus, delivered to apical ER fenestrations, and assembled on the surfaces of apical cell walls, where a proteinaceous granular layer apparently participates in fibril morphogenesis. We further propose that hydrocarbons are produced by the nonapical ER, directly delivered to the contiguous cell membrane, and pass across the nonapical cell wall into the hydrocarbon-based ECM.

Micron-scale holes terminate the phage infection cycle.

Holins are small phage-encoded proteins that accumulate harmlessly in the cytoplasmic membrane during the infection cycle until suddenly, at an allele-specific time, triggering to form lethal lesions, or "holes." In the phages lambda and T4, the holes have been shown to be large enough to allow release of prefolded active endolysin from the cytoplasm, which results in destruction of the cell wall, followed by lysis within seconds. Here, the holes caused by S105, the lambda-holin, have been captured in vivo by cryo-EM. Surprisingly, the scale of the holes is at least an order of magnitude greater than any previously described membrane channel, with an average diameter of 340 nm and some exceeding 1 microm. Most cells exhibit only one hole, randomly positioned in the membrane, irrespective of its size. Moreover, on coexpression of holin and endolysin, the degradation of the cell wall leads to spherically shaped cells and a collapsed inner membrane sac. To obtain a 3D view of the hole by cryo-electron tomography, we needed to reduce the average size of the cells significantly. By taking advantage of the coupling of bacterial cell size and growth rate, we achieved an 80% reduction in cell mass by shifting to succinate minimal medium for inductions of the S105 gene. Cryotomographic analysis of the holes revealed that they were irregular in shape and showed no evidence of membrane invagination. The unexpected scale of these holes has implications for models of holin function.

Single particle tracking analysis of the chloroplast division protein FtsZ anchoring to the inner envelope membrane.

Replication of chloroplast in plant cells is an essential process that requires co-assembly of the tubulin-like plastid division proteins FtsZ1 and FtsZ2 at mid-chloroplast to form a ring structure called the Z-ring. The Z-ring is stabilized via its interaction with the transmembrane protein ARC6 on the inner envelope membrane of chloroplasts. Plants lacking ARC6 are defective in plastid division and contain only one or two enlarged chloroplasts per cell with abnormal localization of FtsZ: instead of a single Z-ring, many short FtsZ filaments are distributed throughout the chloroplast. ARC6 is thought to be the anchoring point for FtsZ assemblies. To investigate the role of ARC6 in FtsZ anchoring, the mobility of green fluorescent protein-tagged FtsZ assemblies was assessed by single particle tracking in mutant plants lacking the ARC6 protein. Mean square displacement analysis showed that the mobility of FtsZ assemblies is to a large extent characterized by anomalous diffusion behavior (indicative of intermittent binding) and restricted diffusion suggesting that besides ARC6-mediated anchoring, an additional FtsZ-anchoring mechanism is present in chloroplasts.

Electron crystallography of biomolecules: mysterious membranes and missing cones.

One of the major challenges facing structural biologists today is the determination of high-resolution 3D structures of membrane proteins. The requirement for detergent molecules to be present makes X-ray crystallography particularly difficult, coupled with the added problems of isolating sufficient (viable) protein samples at high enough concentrations to yield 3D crystals. One technique that enables structural determination with fewer constraints is electron crystallography of two-dimensional crystals, in which small amounts of membrane proteins can be studied in native form in lipid bilayers.

Physical barriers to carotenoid bioaccessibility. Ultrastructure survey of chromoplast and cell wall morphology in nine carotenoid-containing fruits and vegetables.

BACKGROUND: The ultrastructural characterisation of cellular components is a key element in revealing the bases for differences in nutrient bioaccessibility among fruits and vegetables and their derived products. Together, cell walls and chromoplasts constitute the two major physical barriers to carotenoid release from the food matrix (structure) during digestion. In general, larger cells with thinner cell walls are most likely to fail under mechanical pressure. In relation to chromoplasts, the substructures plastoglobuli, crystals and membranes give decreasing rates of carotenoid solubilisation when exposed to digestive forces. RESULTS: This paper describes cell wall and chromoplast structures in nine carotenoid-storing raw fruits and vegetables. Watermelon and melon cells were shown to have the largest cells concomitant with thin, non-fibrous cell walls, while carrot, hypodermal grapefruit and sweet potato cells were smallest with fibrous or dense cell walls. Mango fruit showed the highest proportion of globules to other substructures. Carrot, papaya and tomato contained many crystalline structures. Finally, watermelon, mango and butternut squash developed a high proportion of membranous structures. CONCLUSION: A more precise description of the physical characteristics of foods that stand as barriers to bioaccessibility can help in understanding which are more or less inhibitory for particular foods.

Efficient isolation of Pseudomonas aeruginosa type III secretion translocators and assembly of heteromeric transmembrane pores in model membranes.

Translocation of bacterial toxins or effectors into host cells using the type III secretion (T3S) system is a conserved mechanism shared by many Gram-negative pathogens. Pseudomonas aeruginosa injects different proteins across the plasma membrane of target cells, altering the normal metabolism of the host. Protein translocation presumably occurs through a proteinaceous transmembrane pore formed by two T3S secreted protein translocators, PopB and PopD. Unfolded translocators are secreted through the T3S needle prior to insertion into the target membrane. Purified PopB and PopD form pores in model membranes. However, their tendency to form heterogeneous aggregates in solution had hampered the analysis of how these proteins undergo the transition from a denatured state to a membrane-inserted state. Translocators were purified as stable complexes with the cognate chaperone PcrH and isolated from the chaperone using 6 M urea. We report here the assembly of stable transmembrane pores by dilution of urea-denatured translocators in the presence of membranes. PopB and PopD spontaneously bound liposomes containing anionic phospholipids and cholesterol in a pH-dependent manner as observed by two independent assays, time-resolved Förster resonance energy transfer and sucrose-step gradient ultracentrifugation. Using Bodipy-labeled proteins, we found that PopB interacts with PopD on the membrane surface as determined by excitation energy migration and fluorescence quenching. Stable transmembrane pores are more efficiently assembled at pH <5.0, suggesting that acidic residues might be involved in the initial membrane binding and/or insertion. Altogether, the experimental setup described here represents an efficient method for the reconstitution and analysis of membrane-inserted translocators.

Raman spectroscopy analysis of botryococcene hydrocarbons from the green microalga Botryococcus braunii.

Botryococcus braunii, B race is a unique green microalga that produces large amounts of liquid hydrocarbons known as botryococcenes that can be used as a fuel for internal combustion engines. The simplest botryococcene (C(30)) is metabolized by methylation to give intermediates of C(31), C(32), C(33), and C(34), with C(34) being the predominant botryococcene in some strains. In the present work we have used Raman spectroscopy to characterize the structure of botryococcenes in an attempt to identify and localize botryococcenes within B. braunii cells. The spectral region from 1600-1700 cm(-1) showed ν(C=C) stretching bands specific for botryococcenes. Distinct botryococcene Raman bands at 1640 and 1647 cm(-1) were assigned to the stretching of the C=C bond in the botryococcene branch and the exomethylene C=C bonds produced by the methylations, respectively. A Raman band at 1670 cm(-1) was assigned to the backbone C=C bond stretching. Density function theory calculations were used to determine the Raman spectra of all botryococcenes to compare computed theoretical values with those observed. The analysis showed that the ν(C=C) stretching bands at 1647 and 1670 cm(-1) are actually composed of several closely spaced bands arising from the six individual C=C bonds in the molecule. We also used confocal Raman microspectroscopy to map the presence and location of methylated botryococcenes within a colony of B. braunii cells based on the methylation-specific 1647 cm(-1) botryococcene Raman shift.

Oligomerization of plant FtsZ1 and FtsZ2 plastid division proteins.

FtsZ was identified in bacteria as the first protein to localize mid-cell prior to division and homologs have been found in many plant species. Bacterial studies demonstrated that FtsZ forms a ring structure that is dynamically exchanged with a soluble pool of FtsZ. Our previous work established that Arabidopsis FtsZ1 and FtsZ2-1 are capable of in vitro self-assembly into two distinct filament types, termed type-I and type-II and noted the presence of filament precursor molecules which prompted this investigation. Using a combination of electron microscopy, gel chromatography and native PAGE revealed that (i) prior to FtsZ assembly initiation the pool consists solely of dimers and (ii) during assembly of the Arabidopsis FtsZ type-II filaments the most common intermediate between the dimer and filament state is a tetramer. Three-dimensional reconstructions of the observed dimer and tetramer suggest these oligomeric forms may represent consecutive steps in type-II filament assembly and a mechanism is proposed, which is expanded to include FtsZ assembly into type-I filaments. Finally, the results permit a discussion of the oligomeric nature of the soluble pool in plants.

Characterization of the mechanism of action of the genetically modified Cry1AbMod toxin that is active against Cry1Ab-resistant insects.

Bacillus thuringiensis Cry toxins are used in the control of insect pests. They are pore-forming toxins with a complex mechanism that involves the sequential interaction with receptors. They are produced as protoxins, which are activated by midgut proteases. Activated toxin binds to cadherin receptor, inducing an extra cleavage including helix alpha-1, facilitating the formation of a pre-pore oligomer. The toxin oligomer binds to secondary receptors such as aminopeptidase and inserts into lipid rafts forming pores and causing larval death. The primary threat to efficacy of Bt-toxins is the evolution of insect resistance. Engineered Cry1AMod toxins, devoid of helix alpha-1, could be used for the control of resistance in lepidopterans by bypassing the altered cadherin receptor, killing resistant insects affected in this receptor. Here we analyzed the mechanism of action of Cry1AbMod. We found that alkaline pH and the presence of membrane lipids facilitates the oligomerization of Cry1AbMod. In addition, tryptophan fluorescence emission spectra, ELISA binding to pure aminopeptidase receptor, calcein release assay and analysis of ionic-conductance in planar lipid bilayers, indicated that the secondary steps in mode of action that take place after interaction with cadherin receptor such as oligomerization, receptor binding and pore formation are similar in the Cry1AbMod and in the wild type Cry1Ab. Finally, the membrane-associated structure of Cry1AbMod oligomer was analyzed by electron crystallography showing that it forms a complex with a trimeric organization.

The holin of bacteriophage lambda forms rings with large diameter.

Holins control the length of the infection cycle of tailed phages (the Caudovirales) by oligomerizing to form lethal holes in the cytoplasmic membrane at a time dictated by their primary structure. Nothing is currently known about the physical basis of their oligomerization or the structure of the oligomers formed by any known holin. Here we use electron microscopy and single-particle analysis to characterize structures formed by the bacteriophage lambda holin (S105) in vitro. In non-ionic or mild zwitterionic detergents, purified S105, but not the lysis-defective variant S105A52V, forms rings of at least two size classes, the most common having inner and outer diameters of 8.5 and 23 nm respectively, and containing approximately 72 S105 monomers. The height of these rings, 4 nm, closely matches the thickness of the lipid bilayer. The central channel is of unprecedented size for channels formed by integral membrane proteins, consistent with the non-specific nature of holin-mediated membrane permeabilization. S105 present in detergent-solubilized rings and in inverted membrane vesicles showed similar sensitivities to proteolysis and cysteine-specific modification, suggesting that the rings are representative of the lethal holes formed by S105 to terminate the infection cycle and initiate lysis.

Assembly of monomeric human cytomegalovirus pUL104 into portal structures.

In order for human cytomegalovirus (HCMV) to replicate, concatemeric DNA has to be cleaved into unit-length genomes and packaged into preformed capsids. For packaging to take place and DNA to be translocated, a channel is required in the capsid. Viral capsid channels are generally formed by portal proteins. Here, we show by cross-linking, native gel electrophoresis of infected cells and gel permeation chromatography that the HCMV portal candidate protein pUL104 can form dimers and higher order multimers. Electron microscopy of purified monomeric pUL104 after 5 min incubation revealed that the protein had assembled into a multimeric form and that this form closely resembles complete portal assembly. This is the first study to show that pUL104 monomers have the ability to form portal complexes without additional viral proteins.