Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 20
Filtrar
Más filtros

Banco de datos
Tipo del documento
Intervalo de año de publicación
1.
Nano Lett ; 23(24): 11409-11415, 2023 Dec 27.
Artículo en Inglés | MEDLINE | ID: mdl-38095312

RESUMEN

A prominent characteristic of 2D magnetic systems is the enhanced spin fluctuations, which reduce the ordering temperature. We report that a magnetic field of only 1000th of the Heisenberg superexchange interaction can induce a crossover, which for practical purposes is the effective ordering transition, at temperatures about 6 times the Néel transition in a site-diluted two-dimensional anisotropic quantum antiferromagnet. Such a strong magnetic response is enabled because the system directly enters the antiferromagnetically ordered state from the isotropic disordered state, skipping the intermediate anisotropic stage. The underlying mechanism is achieved on a pseudospin-half square lattice realized in the [(SrIrO3)1/(SrTiO3)2] superlattice thin film that is designed to linearly couple the staggered magnetization to external magnetic fields by virtue of the rotational symmetry-preserving Dzyaloshinskii-Moriya interaction. Our model analysis shows that the skipping of the anisotropic regime despite finite anisotropy is due to the enhanced isotropic fluctuations under moderate dilution.

2.
Langmuir ; 39(40): 14308-14327, 2023 Oct 10.
Artículo en Inglés | MEDLINE | ID: mdl-37751568

RESUMEN

We have studied the effect of platinum underlayer for two deposited thicknesses on the microstructure, crystalline quality, morphology, chemical composition, and magnetic properties as well as magnetic domain formation of BaFe12O19 (BaM) grown on YSZ(111) by pulsed laser deposition (PLD). We found that PLD platinum deposited with a thickness of 25 nm cannot withstand the dewetting phenomenon occurring during the subsequent BaM layer growth. A smooth and continuous Pt underlayer that possesses a sharp interface and omits the intermixing between the BaM and substrate was successfully achieved for a deposited Pt film thickness of 75 nm. Independent of the thickness of the deposited Pt layer, the c-axis orientation as well as coercivity Hc and the anisotropy HA fields were significantly improved due to a remarkable improvement of lattice mismatch in comparison with the BaM layer grown without a Pt underlayer on YSZ(111). By applying high-resolution X-ray diffraction, scanning and transmission electron microscopy (SEM/TEM), and atomically resolved scanning TEM imaging combined with energy-dispersive X-ray spectroscopy, as well as atomic and magnetic force microscopy, a comprehensive investigation of both structure and chemical composition of the deposited BaM films and their interfacial regions was performed. This study aimed to correlate the enhancement of the overall magnetic properties and of the local spin magnetic domain orientation with the modification of BaM microstructure and chemical composition at the nanometer scale due to the Pt underlayer. Finally, we attempted to understand the mechanisms that control the magnetic properties of these BaM films in order to be able to tailor them.

3.
Phys Rev Lett ; 129(18): 187201, 2022 Oct 28.
Artículo en Inglés | MEDLINE | ID: mdl-36374692

RESUMEN

The number of atomic layers confined in a two-dimensional structure is crucial for the electronic and magnetic properties. Single-layer and bilayer J_{eff}=1/2 square lattices are well-known examples where the presence of the extra layer turns the XY anisotropy to the c-axis anisotropy. We report on experimental realization of a hybrid SrIrO_{3}/SrTiO_{3} superlattice that integrates monolayer and bilayer square lattices in one layered structure. By synchrotron x-ray diffraction, resonant x-ray magnetic scattering, magnetization, and resistivity measurements, we found that the hybrid superlattice exhibits properties that are distinct from both the single-layer and bilayer systems and cannot be explained by a simple addition of them. In particular, the entire hybrid superlattice orders simultaneously through a single antiferromagnetic transition at temperatures similar to the bilayer system but with all the J_{eff}=1/2 moments mainly pointing in the ab plane similar to the single-layer system. The results show that bringing monolayer and bilayer with orthogonal properties in proximity to each other in a hybrid superlattice structure is a powerful way to stabilize a unique state not obtainable in a uniform structure.

4.
Langmuir ; 37(2): 734-749, 2021 Jan 19.
Artículo en Inglés | MEDLINE | ID: mdl-33406840

RESUMEN

Optimizing and monitoring the growth conditions of Pt films, often used as bottom electrodes in multiferroic material systems, represents a highly relevant issue that is of importance for controlling the crystalline quality and performance of ferroelectric oxides such as, e.g. LuFeO3. We performed a time-resolved monitoring of the growth and morphology of Pt films during pulsed laser deposition (PLD) in dependence on the grown film effective thickness and on the growth temperature Tg using in situ grazing incidence small-angle X-ray scattering (GISAXS). Through real-time analysis and modeling of GISAXS patterns, we could fully characterize the influence of Tg on the morphology and on the growth kinetics of the Pt layers. Consequently, critical and characteristic effective thicknesses for the transitions nucleation phase (I)/coalescence phase (II) and coalescence phase (II)/coarsening phase (III) could be determined. In combination with complementary microscopic imaging and chemical mapping via combined SEM/EDXS, we demonstrate the occurrence of a morphological progression in the Pt PLD-grown Pt films, changing from grains at room temperature to a 3D-island morphology at 300 °C, further to a hole-free structure at 500 °C, and finally to a channel structure for 700 and 900 °C. The film topography, as characterized by atomic force microscopy (AFM), favors the PLD growth of Pt layers at temperatures beyond 700 °C where the film is homogeneous, continuous, and hole-free with a flat and smooth surface. The double dependency of the percolation transition on the film effective thickness and on the growth temperature has been established by measuring the electrical conductivity.

5.
Phys Rev Lett ; 124(17): 177601, 2020 May 01.
Artículo en Inglés | MEDLINE | ID: mdl-32412287

RESUMEN

We report on the epitaxial strain-driven electronic and antiferromagnetic modulations of a pseudospin-half square-lattice realized in superlattices of (SrIrO_{3})_{1}/(SrTiO_{3})_{1}. With increasing compressive strain, we find the low-temperature insulating behavior to be strongly suppressed with a corresponding systematic reduction of both the Néel temperature and the staggered moment. However, despite such a suppression, the system remains weakly insulating above the Néel transition. The emergence of metallicity is observed under large compressive strain but only at temperatures far above the Néel transition. These behaviors are characteristics of the Slater-Mott crossover regime, providing a unique experimental model system of the spin-half Hubbard Hamiltonian with a tunable intermediate coupling strength.

6.
Inorg Chem ; 57(23): 14727-14732, 2018 Dec 03.
Artículo en Inglés | MEDLINE | ID: mdl-30427197

RESUMEN

A new type of uranium binary hydride, UH2, with the CaF2 crystal structure, was synthesized in a thin-film form using reactive sputter deposition at low temperatures. The material has a grain size of 50-100 nm. The lattice parameter a = (535.98 ± 0.14 pm) is close to that in known Np (534.3 pm) and Pu (535.9 pm) iso-types. UH2 is a metallic ferromagnet with the Curie temperature TC ≈ 120 K. A very wide hysteresis loop indicates strong magnetocrystalline anisotropy. X-ray photoelectron spectroscopy reveals similarities with electronic structure of UH3, which is also ferromagnet with higher TC = 165 K.

7.
Phys Rev Lett ; 119(2): 027204, 2017 Jul 14.
Artículo en Inglés | MEDLINE | ID: mdl-28753323

RESUMEN

We report an experimental investigation of the two-dimensional J_{eff}=1/2 antiferromagnetic Mott insulator by varying the interlayer exchange coupling in [(SrIrO_{3})_{1}, (SrTiO_{3})_{m}] (m=1, 2 and 3) superlattices. Although all samples exhibited an insulating ground state with long-range magnetic order, temperature-dependent resistivity measurements showed a stronger insulating behavior in the m=2 and m=3 samples than the m=1 sample which displayed a clear kink at the magnetic transition. This difference indicates that the blocking effect of the excessive SrTiO_{3} layer enhances the effective electron-electron correlation and strengthens the Mott phase. The significant reduction of the Néel temperature from 150 K for m=1 to 40 K for m=2 demonstrates that the long-range order stability in the former is boosted by a substantial interlayer exchange coupling. Resonant x-ray magnetic scattering revealed that the interlayer exchange coupling has a switchable sign, depending on the SrTiO_{3} layer number m, for maintaining canting-induced weak ferromagnetism. The nearly unaltered transition temperature between the m=2 and the m=3 demonstrated that we have realized a two-dimensional antiferromagnet at finite temperatures with diminishing interlayer exchange coupling.

8.
RSC Adv ; 14(12): 8434-8444, 2024 Mar 06.
Artículo en Inglés | MEDLINE | ID: mdl-38476175

RESUMEN

A chiral organic insulator, (R)-α-phenylethylammonium-oxalate (RAPEAO), was prepared in the forms of single-crystal, powder and spin-coated layers on silicon substrate surfaces modified by plasma treatment or a (3-aminopropyl)triethoxysilane (APTES) polymer layer. For spin-coated samples, different deposition conditions have been investigated - various thicknesses controlled by speed and the number of repeated cycles, deposited continuously or by a layer-by-layer technique. The chemistry of this compound did not allow the deposition of the continuous thin film, yet, it caused the formation of a few nuclei on the substrate surface. Modification of the substrate with low temperature plasma caused the increased number of nuclei as well as enabled the growth of the nanowires, which was confirmed by atomic force microscopy (AFM) images. The same effect has been observed from the X-ray diffraction (XRD) measurements, where preferential growth of the studied compound in one direction was confirmed by grazing incidence, as well as wide reciprocal space mapping (WRSM). XRD studies confirmed the structural similarity of the compound, disregarding the compound form ranging from nanowires on the substrate to the bulk. Finally, the substrate covered by APTES thin film has had increased coverage of the substrate surface by the studied compound. Impedance spectroscopy revealed that the electrical conductivity of the sample in bulk at 20 °C is 6.3 × 10-15 (Ω cm)-1, indicating the insulating properties of the material.

9.
Nanomaterials (Basel) ; 14(8)2024 Apr 18.
Artículo en Inglés | MEDLINE | ID: mdl-38668205

RESUMEN

The structure and the chemical composition of individual layers as well as of interfaces belonging to the two heterostructures M1 (BaFe12O19/YbFeO3/YSZ) and M2 (YbFeO3/BaFe12O19/YSZ) grown by pulsed laser deposition on yttria-stabilized zirconia (YSZ) substrates are deeply characterized by using a combination of methods such as high-resolution X-ray diffraction, transmission electron microscopy (TEM), and atomic-resolution scanning TEM with energy-dispersive X-ray spectroscopy. The temperature-dependent magnetic properties demonstrate two distinct heterostructures with different coercivity, anisotropy fields, and first anisotropy constants, which are related to the defect concentrations within the individual layers and to the degree of intermixing at the interface. The heterostructure with the stacking order BaFe12O19/YbFeO3, i.e., M1, exhibits a distinctive interface without any chemical intermixture, while an Fe-rich crystalline phase is observed in M2 both in atomic-resolution EDX maps and in mass density profiles. Additionally, M1 shows high c-axis orientation, which induces a higher anisotropy constant K1 as well as a larger coercivity due to a high number of phase boundaries. Despite the existence of a canted antiferromagnetic/ferromagnetic combination (T < 140 K), both heterostructures M1 and M2 do not reveal any detectable exchange bias at T = 50 K. Additionally, compressive residual strain on the BaM layer is found to be suppressing the ferromagnetism, thus reducing the Curie temperature (Tc) in the case of M1. These findings suggest that M1 (BaFe12O19/YbFeO3/YSZ) is suitable for magnetic storage applications.

10.
Nanomaterials (Basel) ; 14(8)2024 Apr 20.
Artículo en Inglés | MEDLINE | ID: mdl-38668219

RESUMEN

The morphology and crystal structure of Pt films grown by pulsed laser deposition (PLD) on yttria-stabilized zirconia (YSZ)at high temperatures Tg = 900 °C was studied for four different film thicknesses varying between 10 and 70 nm. During the subsequent growth of the capping layer, the thermal stability of the Pt was strongly influenced by the Pt film's thickness. Furthermore, these later affected the film morphology, the crystal structure and hillocks size, and distribution during subsequent growth at Tg = 900 °C for a long duration. The modifications in the morphology as well as in the structure of the Pt film without a capping layer, named also as the as-grown and encapsulated layers in the bilayer system, were examined by a combination of microscopic and scattering methods. The increase in the thickness of the deposited Pt film brought three competitive phenomena into occurrence, such as 3D-2D morphological transition, dewetting, and hillock formation. The degree of coverage, film continuity, and the crystal quality of the Pt film were significantly improved by increasing the deposition time. An optimum Pt film thickness of 70 nm was found to be suitable for obtaining a hillock-free Pt bottom electrode which also withstood the dewetting phenomena revealed during the subsequent growth of capping layers. This achievement is crucial for the deposition of functional bottom electrodes in ferroelectric and multiferroic heterostructure systems.

11.
Nanomaterials (Basel) ; 14(12)2024 Jun 17.
Artículo en Inglés | MEDLINE | ID: mdl-38921917

RESUMEN

The hexagonal ferrite h-YbFeO3 grown on YSZ(111) by pulsed laser deposition is foreseen as a promising single multiferroic candidate where ferroelectricity and antiferromagnetism coexist for future applications at low temperatures. We studied in detail the microstructure as well as the temperature dependence of the magnetic properties of the devices by comparing the heterostructures grown directly on YSZ(111) (i.e., YbPt_Th0nm) with h-YbFeO3 films deposited on substrates buffered with platinum Pt/YSZ(111) and in dependence on the Pt underlayer film thickness (i.e., YbPt_Th10nm, YbPt_Th40nm, YbPt_Th55nm, and YbPt_Th70nm). The goal was to deeply understand the importance of the crystal quality and morphology of the Pt underlayer for the h-YbFeO3 layer crystal quality, surface morphology, and the resulting physical properties. We demonstrate the relevance of homogeneity, continuity, and hillock formation of the Pt layer for the h-YbFeO3 microstructure in terms of crystal structure, mosaicity, grain boundaries, and defect distribution. The findings of transmission electron microscopy and X-ray diffraction reciprocal space mapping characterization enable us to conclude that an optimum film thickness for the Pt bottom electrode is ThPt = 70 nm, which improves the crystal quality of h-YbFeO3 films grown on Pt-buffered YSZ(111) in comparison with h-YbFeO3 films grown on YSZ(111) (i.e., YbPt_Th0nm). The latter shows a disturbance in the crystal structure, in the up-and-down atomic arrangement of the ferroelectric domains, as well as in the Yb-Fe exchange interactions. Therefore, an enhancement in the remanent and in the total magnetization was obtained at low temperatures below 50 K for h-YbFeO3 films deposited on Pt-buffered substrates Pt/YSZ(111) when the Pt underlayer reached ThPt = 70 nm.

12.
Nat Commun ; 15(1): 4961, 2024 Jun 11.
Artículo en Inglés | MEDLINE | ID: mdl-38862514

RESUMEN

Phases with spontaneous time-reversal ( T ) symmetry breaking are sought after for their anomalous physical properties, low-dissipation electronic and spin responses, and information-technology applications. Recently predicted altermagnetic phase features an unconventional and attractive combination of a strong T -symmetry breaking in the electronic structure and a zero or only weak-relativistic magnetization. In this work, we experimentally observe the anomalous Hall effect, a prominent representative of the T -symmetry breaking responses, in the absence of an external magnetic field in epitaxial thin-film Mn5Si3 with a vanishingly small net magnetic moment. By symmetry analysis and first-principles calculations we demonstrate that the unconventional d-wave altermagnetic phase is consistent with the experimental structural and magnetic characterization of the Mn5Si3 epilayers, and that the theoretical anomalous Hall conductivity generated by the phase is sizable, in agreement with experiment. An analogy with unconventional d-wave superconductivity suggests that our identification of a candidate of unconventional d-wave altermagnetism points towards a new chapter of research and applications of magnetic phases.

13.
Nat Commun ; 14(1): 1404, 2023 Mar 14.
Artículo en Inglés | MEDLINE | ID: mdl-36918538

RESUMEN

While geometrically frustrated quantum magnets host rich exotic spin states with potentials for revolutionary quantum technologies, most of them are necessarily good insulators which are difficult to be integrated with modern electrical circuit. The grand challenge is to electrically detect the emergent fluctuations and excitations by introducing charge carriers that interact with the localized spins without destroying their collective spin states. Here, we show that, by designing a Bi2Ir2O7/Dy2Ti2O7 heterostructure, the breaking of the spin-ice rule in insulating Dy2Ti2O7 leads to a charge response in the conducting Bi2Ir2O7 measured as anomalous magnetoresistance during the field-induced Kagome ice-to-saturated ice transition. The magnetoresistive anomaly also captures the characteristic angular and temperature dependence of this ice-rule-breaking transition, which has been understood as magnetic monopole condensation. These results demonstrate a novel heteroepitaxial approach for electronically probing the transition between exotic insulating spin states, laying out a blueprint for the metallization of frustrated quantum magnets.

14.
J Mater Sci ; 57(25): 11563-11581, 2022.
Artículo en Inglés | MEDLINE | ID: mdl-35789923

RESUMEN

This work describes temperature-induced crystallization processes and reaction mechanisms occurring in the borohydride-imidazolate system. In the course of thermal evolution, crystal structures of two novel bimetallic imidazolates AMnIm3 (A = Na, K) were solved using synchrotron radiation powder diffraction data. Both the alkali metal cation and the Mn cations exhibit distorted octahedral coordination while each imidazolate is surrounded by two alkali metal and two manganese atoms. Extensive study of the thermal expansion behaviour revealed that the expansion of the bimetallic imidazolates does not proceed uniformly over the entire temperature range but rather abruptly changes from a colossal negative to a moderate positive volume expansion. Such behaviour is caused by the coherent intergrowth of the coexisting phases which form a composite, a positive lattice mismatch and a tensile strain during the coexistence of NaMIm3 (M = Mg and Mn) and NaIm or HT-NaIm. Such coherent coalescence of two materials opens the possibility for targeted design of zero thermal expansion materials. Graphical abstract: Crystal structures of AMnIm3 (A = Na, K) were determined. Coherently intergrown NaMIm3/NaIm (M = Mg, Mn) present colossal negative thermal expansion. Supplementary Information: The online version contains supplementary material available at 10.1007/s10853-022-07360-z.

15.
Sci Rep ; 12(1): 5647, 2022 Apr 05.
Artículo en Inglés | MEDLINE | ID: mdl-35383221

RESUMEN

Atomistic processes during pulsed-laser deposition (PLD) growth influence the physical properties of the resulting films. We investigated the PLD of epitaxial layers of hexagonal LuFeO[Formula: see text] by measuring the X-ray diffraction intensity in the quasiforbidden reflection 0003 in situ during deposition. From measured X-ray diffraction intensities we determined coverages of each layer and studied their time evolution which is described by scaling exponent [Formula: see text] directly connected to the surface roughness. Subsequently we modelled the growth using kinetic Monte Carlo simulations. While the experimentally obtained scaling exponent [Formula: see text] decreases with the laser frequency, the simulations provided the opposite behaviour. We demonstrate that the increase of the surface temperature caused by impinging ablated particles satisfactorily explains the recorded decrease in the scaling exponent with the laser frequency. This phenomena is often overlooked during the PLD growth.

16.
Dalton Trans ; 50(45): 16849, 2021 Nov 23.
Artículo en Inglés | MEDLINE | ID: mdl-34766613

RESUMEN

Correction for 'Mixed H2O/H2 plasma-induced redox reactions of thin uranium oxide films under UHV conditions' by Ghada El Jamal et al., Dalton Trans., 2021, DOI: 10.1039/d1dt01020d.

17.
Materials (Basel) ; 13(1)2019 Dec 21.
Artículo en Inglés | MEDLINE | ID: mdl-31877688

RESUMEN

Structural quality of LuFeO 3 epitaxial layers grown by pulsed-laser deposition on sapphire substrates with and without platinum Pt interlayers has been investigated by in situ high-resolution X-ray diffraction (reciprocal-space mapping). The parameters of the structure such as size and misorientation of mosaic blocks have been determined as functions of the thickness of LuFeO 3 during growth and for different thicknesses of platinum interlayers up to 40 nm. By means of fitting of the time-resolved X-ray reflectivity curves and by in situ X-ray diffraction measurement, we demonstrate that the LuFeO 3 growth rate as well as the out-of-plane lattice parameter are almost independent from Pt interlayer thickness, while the in-plane LuFeO 3 lattice parameter decreases. We reveal that, despite the different morphologies of the Pt interlayers with different thickness, LuFeO 3 was growing as a continuous mosaic layer and the misorientation of the mosaic blocks decreases with increasing Pt thickness. The X-ray diffraction results combined with ex situ scanning electron microscopy and high-resolution transmission electron microscopy demonstrate that the Pt interlayer significantly improves the structure of LuFeO 3 by reducing the misfit of the LuFeO 3 lattice with respect to the material underneath.

18.
Sci Rep ; 9(1): 4263, 2019 Mar 12.
Artículo en Inglés | MEDLINE | ID: mdl-30862782

RESUMEN

Fundamental control of magnetic coupling through heterostructure morphology is a prerequisite for rational engineering of magnetic ground states. We report the tuning of magnetic interactions in superlattices composed of single and bilayers of SrIrO3 inter-spaced with SrTiO3 in analogy to the Ruddlesden-Popper series iridates. Magnetic scattering shows predominately c-axis antiferromagnetic orientation of the magnetic moments for the bilayer, as in Sr3Ir2O7. However, the magnetic excitation gap, measured by resonant inelastic x-ray scattering, is quite different between the two structures, evidencing a significant change in the stability of the competing magnetic phases. In contrast, the single layer iridate hosts a more bulk-like gap. We find these changes are driven by bending of the c-axis Ir-O-Ir bond, which is much weaker in the single layer, and subsequent local environment changes, evidenced through x-ray diffraction and magnetic excitation modeling. Our findings demonstrate how large changes in the magnetic interactions can be tailored and probed in spin-orbit coupled heterostructures by engineering subtle structural modulations.

19.
Nanoscale ; 10(7): 3198-3211, 2018 Feb 15.
Artículo en Inglés | MEDLINE | ID: mdl-29379917

RESUMEN

The emission of light in two-dimensional (2-D) layered hybrid organic lead halide perovskites, namely (R-NH3)2PbX4, can be effectively tuned using specific building blocks for the perovskite formation. Herein this behaviour is combined with a non-covalent graphene functionalization allowing excellent selectivity and spatial resolution of the perovskite film growth, promoting the formation of hybrid 2-D perovskite : graphene heterostructures with uniform coverage of up to centimeter scale graphene sheets and arbitrary shapes down to 5 µm. Using cryo-Raman microspectroscopy, highly resolved spectra of the perovskite phases were obtained and the Raman mapping served as a convenient spatially resolved technique for monitoring the distribution of the perovskite and graphene constituents on the substrate. In addition, the stability of the perovskite phase with respect to the thermal variation was inspected in situ by X-ray diffraction. Finally, time-resolved photoluminescence characterization demonstrated that the optical properties of the perovskite films grown on graphene are not hampered. Our study thus opens the door to smart fabrication routes for (opto)-electronic devices based on 2-D perovskites in contact with graphene with complex architectures.

20.
Phys Rev B ; 94(5)2016 Aug 01.
Artículo en Inglés | MEDLINE | ID: mdl-28459114

RESUMEN

The evolution of local ferroelectric lattice distortions in multiferroic Ge1-x Mn x Te is studied by x-ray diffraction, x-ray absorption spectroscopy and density functional theory. We show that the anion/cation displacements smoothly decrease with increasing Mn content, thereby reducing the ferroelectric transition from 700 to 100 K at x = 0.5, where the ferromagnetic Curie temperature reaches its maximum. First principles calculations explain this quenching by different local bond contributions of the Mn 3d shell compared to the Ge 4s shell in excellent quantitative agreement with the experiments.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA