RESUMEN
A facile and cost-effective approach assisted by ball milling (BM) of commercial titanium dioxide (TiO2), has been utilized to develop cheaper and efficient construction materials. At least three of the commercial and cheaper TiO2 samples (BA01-01, BA01-01+ and R996, designated as A1, A4 and R1, respectively) were selected and subjected to BM treatment to enhance their photocatalytic efficiencies, if possible. It was noted, that the samples A1, A4 and R1 were typical composites of TiO2 and calcium carbonate (CaCO3) and contained varying proportions of anatase, and rutile phases of TiO2 and CaCO3. Two of the highly efficient commercial TiO2 samples, Degussa P25 (simply designated as P25) and ST01 (Ishihara Ind.) were selected for making benchmark comparisons of photocatalytic efficiencies. The BM treated TiO2 samples (designated as TiO2-BM with respect to A1, A4 and R1) were evaluated for photocatalytic efficiencies both in both aqueous (methylene blue (MB)) and gaseous (NOx) photodegradation reactions. Based on detailed comparative investigations, it was observed that A1-BM photocatalyst exhibited superior photocatalytic performances over A4-BM and R1-BM, towards both MB and NOx photodegradation reactions. The difference of NOx photodegradation efficiency between the mortar mixed with A1-BM and that mixed with ST01, and P-25 at 15% were 16.6%, and 32.4%, respectively. Even though the mortar mixed with A1-BM at 15% composition exhibited a slightly lower NOx photodegradation efficiency as compared to mortar mixed with the expensive ST01 and P-25 photocatalysts, the present work promises an economic application in the eco-friendly construction materials for air purification considering the far lower cost of A1. The reasons for the superior performance of A1-BM were deduced through characterization of optical properties, surface characteristics, phase composition, morphology, microstructure and particle size distribution between pristine and BM treated A1 using characterization techniques such as diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction analysis, field emission scanning electron microscopy and particle size analysis.
RESUMEN
Titanium dioxide (TiO2), the golden standard among the photocatalysts, exhibits a varying level of photocatalytic activities (PCA) amongst the synthetically prepared and commercially available products. For commercial applications, superior photoactivity and cost-effectiveness are the two main factors to be reckoned with. This study presents the development of simple, cost-effective post-treatment processes for a less costly TiO2 to significantly enhance the PCA to the level of expensive commercial TiO2 having demonstrated superior photoactivities. We have utilized sequential calcination and ball milling (BM) post-treatment processes on a less-costlier KA100 TiO2 and demonstrated multi-fold (nearly 90 times) enhancement in PCA. The post-treated KA100 samples along with reference commercial samples (P25, NP400, and ST01) were well-characterized by appropriate instrumentation and evaluated for the PCA considering acetaldehyde photodegradation as the model reaction. Lattice parameters, phase composition, crystallite size, surface functionalities, titanium, and oxygen electronic environments were evaluated. Among post-treated KA100, the sample that is subjected to sequential 700 °C calcination and BM (KA7-BM) processes exhibited 90-fold PCA enhancement over pristine KA100 and the PCA-like commercial NP400 (pure anatase-based TiO2). Based on our results, we attribute the superior PCA for KA7-BM due to the smaller crystallite size, the co-existence of mixed anatase-srilankite-rutile phases, and the consequent multiphase heterojunction formation, higher surface area, lattice disorder/strain generation, and surface oxygen environment. The present work demonstrates a feasible potential for the developed post-treatment strategy towards commercial prospects.
RESUMEN
Titanium dioxide (TiO2) has been extensively investigated in interdisciplinary research (such as catalysis, energy, environment, health, etc.) owing to its attractive physico-chemical properties, abundant nature, chemical/environmental stability, low-cost manufacturing, low toxicity, etc. Over time, TiO2-incorporated building/construction materials have been utilized for mitigating potential problems related to the environment and human health issues. However, there are challenges with regards to photocatalytic efficiency improvements, lab to industrial scaling up, and commercial product production. Several innovative approaches/strategies have been evolved towards TiO2 modification with the focus of improving its photocatalytic efficiency. Taking these aspects into consideration, research has focused on the utilization of many of these advanced TiO2 materials towards the development of construction materials such as concrete, mortar, pavements, paints, etc. This topical review focuses explicitly on capturing and highlighting research advancements in the last five years (mainly) (2014-2019) on the utilization of various modified TiO2 materials for the development of practical photocatalytic building materials (PBM). We briefly summarize the prospective applications of TiO2-based building materials (cement, mortar, concretes, paints, coating, etc.) with relevance to the removal of outdoor/indoor NOx and volatile organic compounds, self-cleaning of the surfaces, etc. As a concluding remark, we outline the challenges and make recommendations for the future outlook of further investigations and developments in this prosperous area.