Synthesis, Characterization and Photophysical Properties of a New Family of Rare-earth Cluster-based Metal-organic Frameworks.

In this work, nine new rare-earth metal-organic frameworks (RE-MOFs, where RE = Lu(III), Yb(III), Tm(III), Er(III), Ho(III), Dy(III), Tb(III), Gd(III), and Eu(III)) isostructural to Zr-MOF-808 are synthesized, characterized, and studied regarding their photophysical properties. Materials with high crystallinity and surface area are obtained from a reproducible synthetic procedure that involves the use of two fluorinated modulators. At the same time, these new RE-MOFs display tunable photoluminescent properties due to efficient linker-to-metal energy transfer promoted by the antenna effect, resulting in a series of RE-MOFs displaying lanthanoid-based emissions spanning the visible and near-infrared regions of the electromagnetic spectrum.

The Effect of Linker-to-Metal Energy Transfer on the Photooxidation Performance of an Isostructural Series of Pyrene-Based Rare-Earth Metal-Organic Frameworks.

The tetratopic linker, 1,3,6,8-tetrakis(p-benzoic acid)pyrene (H4 TBAPy) along with rare-earth (RE) ions is used for the synthesis of 9 isostructures of a metal-organic framework (MOF) with shp topology, named RE-CU-10 (RE = Y(III), Gd(III), Tb(III), Dy(III), Ho(III), Er(III), Tm(III), Yb(III), and Lu(III)). The synthesis of each RE-CU-10 analogue requires different reaction conditions to achieve phase pure products. Single crystal X-ray diffraction indicates the presence of a RE9 -cluster in Y- to Tm-CU-10, while a RE11 -cluster is observed for Yb- and Lu-CU-10. The photooxidation performance of RE-CU-10 analogues is evaluated, observing competition between linker-to-metal energy transfer versus the generation of singlet oxygen. The singlet oxygen produced is used to detoxify a mustard gas simulant 2-chloroethylethyl sulfide, with half-lives ranging from 4.0 to 5.8 min, some of the fastest reported to date using UV-irradiation and < 1 mol% catalyst, in methanol under O2 saturation.

A historical perspective on porphyrin-based metal-organic frameworks and their applications.

Porphyrins are important molecules widely found in nature in the form of enzyme active sites and visible light absorption units. Recent interest in using these functional molecules as building blocks for the construction of metal-organic frameworks (MOFs) have rapidly increased due to the ease in which the locations of, and the distances between, the porphyrin units can be controlled in these porous crystalline materials. Porphyrin-based MOFs with atomically precise structures provide an ideal platform for the investigation of their structure-function relationships in the solid state without compromising accessibility to the inherent properties of the porphyrin building blocks. This review will provide a historical overview of the development and applications of porphyrin-based MOFs from early studies focused on design and structures, to recent efforts on their utilization in biomimetic catalysis, photocatalysis, electrocatalysis, sensing, and biomedical applications.

Remodelling a shp: Transmetalation in a Rare-Earth Cluster-Based Metal-Organic Framework.

Postsynthetic modification of metal-organic frameworks (MOFs) is an important strategy for accessing MOF analogues that cannot be easily synthesized de novo. In this work, the rare-earth (RE) cluster-based MOF Y-CU-10 with shp topology was modified through transmetalation using a series of RE ions, including La(III), Nd(III), Eu(III), Tb(III), Er(III), Tm(III), and Yb(III). In all cases, metal exchange higher than 70% was observed, with reproducible results. All transmetalated materials were fully characterized and compared to the parent MOF Y-CU-10 with regard to crystallinity, surface area, and morphology. Additionally, single-crystal X-ray diffraction measurements were performed to provide further evidence of transmetalation occurring in the nonanuclear cluster nodes of the MOF.

Rare-earth metal-organic frameworks: from structure to applications.

In the past 30 years, metal-organic frameworks (MOFs) have garnered widespread attention owing to their diverse chemical structures, and tunable properties. As a result, MOFs are of interest for a wide variety of potential applications spanning multiple scientific and engineering disciplines. MOFs have been synthesized using several elements from the periodic table, including those with metal nodes containing s-, p-, d-, and f-block elements. MOFs synthesized with rare-earth (RE) elements, which include scandium, yttrium and the series of fifteen lanthanides are an intriguing family of MOFs from the standpoint of both structure and function. While RE-MOFs can possess many of the same properties common to all MOF families (i.e., permanent porosity, tunable pore size/shape, accessible Lewis acidic sites), they can also display unique structures and properties owing to the high coordination numbers and distinct optical properties of RE-elements. In this review, we present the progress, and highlight several discoveries from research conducted on the topic of RE-MOFs. First, diverse structures of RE-MOFs are presented, divided into classes based on the composition of the RE-metal node being RE(iii)-ions, RE(iii)-chains, or RE(iii)-clusters. Then, several potential applications of RE-MOFs are presented, highlighting examples in the areas of chemical sensing, white light emission, biological imaging, drug delivery, near infrared emission, catalysis, gas adsorption, and chemical separations.

Modular Construction of Porous Hydrogen-Bonded Molecular Materials from Melams.

Ordered materials with predictable structures and properties can be made by a modular approach, using molecules designed to interact with neighbors and hold them in predetermined positions. Incorporating 4,6-diamino-1,3,5-triazin-2-yl (DAT) groups in modules is an effective way to direct assembly because each DAT group can form multiple N-H⋅⋅⋅N hydrogen bonds according to established patterns. We have found that modules with high densities of N(DAT)2 groups can be made by base-induced double triazinylations of readily available amines. The resulting modules can form structures held together by remarkably large numbers of hydrogen bonds per molecule. Even simple modules with only 1-3 N(DAT)2 groups and fewer than 70 non-hydrogen atoms can crystallize to form highly open networks in which each molecule engages in over 20 N-H⋅⋅⋅N hydrogen bonds, and more than 70 % of the volume is available for accommodating guests. In favorable cases, guests can be removed to create rigorously porous crystalline solids analogous to zeolites and metal-organic frameworks.

Postsynthetic Tuning of Metal-Organic Frameworks for Targeted Applications.

Metal-organic frameworks (MOFs) are periodic, hybrid, atomically well-defined porous materials that typically form by self-assembly and consist of inorganic nodes (metal ions or clusters) and multitopic organic linkers. MOFs as a whole offer many intriguing properties, including ultrahigh porosity, tunable chemical functionality, and low density. These properties point to numerous potential applications, including gas storage, chemical separations, catalysis, light harvesting, and chemical sensing, to name a few. Reticular chemistry, or the linking of molecular building blocks into predetermined network structures, has been employed to synthesize thousands of MOFs. Given the vast library of candidate nodes and linkers, the number of potentially synthetically accessible MOFs is enormous. Nevertheless, a powerful complementary approach to obtain specific structures with desired chemical functionality is to modify known MOFs after synthesis. This approach is particularly useful when incorporation of particular chemical functionalities via direct synthesis is challenging or impossible. The challenges may stem from limited stability or solubility of precursors, unwanted secondary reactivity of precursors, or incompatibility of functional groups with the conditions needed for direct synthesis. MOFs can be postsynthetically modified by replacing the metal nodes and/or organic linkers or via functionalization of the metal nodes and/or organic linkers. Here we describe some of our efforts toward the development and application of postsynthetic strategies for imparting desired chemical functionalities in MOFs of known topology. The techniques include methods for functionalizing MOF nodes, i.e., solvent-assisted ligand incorporation (SALI) and atomic layer deposition in MOFs (AIM) as well as a method to replace structural linkers, termed solvent-assisted linker exchange (SALE), also known as postsynthethic exchange (PSE). For each functionalization strategy, we first describe its chemical basis along with the requirements for its successful implementation. We then present a small number of examples, with an emphasis on those that (a) convey the underlying concepts and/or (b) lead to functional structures (e.g., catalysts) that would be difficult or impossible to access via direct routes. The examples, however, are only illustrative, and a significant body of work exists from both our lab and others, especially for the SALE/PSE strategy. We refer readers to the papers cited and to the references therein. More exciting, in our view, will be new examples and new applications of the functionalization strategies-especially applications made possible by creatively combining the strategies. Underexplored (again, in our view) are implementations that impart electrical conductivity, enable increasingly selective chemical sensing, or facilitate cascade catalysis. It will be interesting to see where these strategies and others take this compelling field over the next few years.

Metal-organic frameworks for the removal of toxic industrial chemicals and chemical warfare agents.

Owing to the vast diversity of linkers, nodes, and topologies, metal-organic frameworks can be tailored for specific tasks, such as chemical separations or catalysis. Accordingly, these materials have attracted significant interest for capture and/or detoxification of toxic industrial chemicals and chemical warfare agents. In this paper, we review recent experimental and computational work pertaining to the capture of several industrially-relevant toxic chemicals, including NH3, SO2, NO2, H2S, and some volatile organic compounds, with particular emphasis on the challenging issue of designing materials that selectively adsorb these chemicals in the presence of water. We also examine recent research on the capture and catalytic degradation of chemical warfare agents such as sarin and sulfur mustard using metal-organic frameworks.

Presence versus Proximity: The Role of Pendant Amines in the Catalytic Hydrolysis of a Nerve Agent Simulant.

Amino-functionalized zirconium-based metal-organic frameworks (MOFs) have shown unprecedented catalytic activity compared to non-functionalized analogues for hydrolysis of organophosphonate-based toxic chemicals. Importantly, the effect of the amino group on the catalytic activity is significantly higher in the case of UiO-66-NH2 , where the amino groups reside near the node, compared to UiO-67-m-NH2 , where they are directed away from the node. Herein, we show that the proximity of the amino group is crucial for fast catalytic activity towards hydrolysis of organophosphonate-based nerve agents. The generality of the observed amine-proximity-dictated catalytic activity has been tested on two different MOF systems which have different topology. DFT calculations reveal that amino groups on all the MOFs studied are not acting as Brønsted bases; instead they control the microsolvation environment at the Zr6 -node active site and therefore increase the overall catalytic rates.

Postsynthetic Incorporation of a Singlet Oxygen Photosensitizer in a Metal-Organic Framework for Fast and Selective Oxidative Detoxification of Sulfur Mustard.

A fullerene-based photosensitizer is incorporated postsynthetically into a Zr6 -based MOF, NU-1000, for enhanced singlet oxygen production. The structural organic linkers in the MOF platform also act as photosensitizers which contribute to the overall generation of singlet oxygen from the material under UV irradiation. The singlet oxygen generated by the MOF/fullerene material is shown to oxidize sulfur mustard selectively to the less toxic bis(2-chloroethyl)sulfoxide with a half-life of only 11 min.

Detoxification of Chemical Warfare Agents Using a Zr6 -Based Metal-Organic Framework/Polymer Mixture.

Owing to their high surface area, periodic distribution of metal sites, and water stability, zirconium-based metal-organic frameworks (Zr6 -MOFs) have shown promising activity for the hydrolysis of nerve agents GD and VX, as well as the simulant, dimethyl 4-nitrophenylphosphate (DMNP), in buffered solutions. A hurdle to using MOFs for this application is the current need for a buffer solution. Here the destruction of the simulant DMNP, as well as the chemical warfare agents (GD and VX) through hydrolysis using a MOF catalyst mixed with a non-volatile, water-insoluble, heterogeneous buffer is reported. The hydrolysis of the simulant and nerve agents in the presence of the heterogeneous buffer was fast and effective.

High efficiency adsorption and removal of selenate and selenite from water using metal-organic frameworks.

A series of zirconium-based, metal-organic frameworks (MOFs) were tested for their ability to adsorb and remove selenate and selenite anions from aqueous solutions. MOFs were tested for adsorption capacity and uptake time at different concentrations. NU-1000 was shown to have the highest adsorption capacity, and fastest uptake rates for both selenate and selenite, of all zirconium-based MOFs studied here. Herein, the mechanism of selenate and selenite adsorption on NU-1000 is explored to determine the important features that make NU-1000 a superior adsorbent for this application.

A Hafnium-Based Metal-Organic Framework as a Nature-Inspired Tandem Reaction Catalyst.

Tandem catalytic systems, often inspired by biological systems, offer many advantages in the formation of highly functionalized small molecules. Herein, a new metal-organic framework (MOF) with porphyrinic struts and Hf6 nodes is reported. This MOF demonstrates catalytic efficacy in the tandem oxidation and functionalization of styrene utilizing molecular oxygen as a terminal oxidant. The product, a protected 1,2-aminoalcohol, is formed selectively and with high efficiency using this recyclable heterogeneous catalyst. Significantly, the unusual regioselective transformation occurs only when an Fe-decorated Hf6 node and the Fe-porphyrin strut work in concert. This report is an example of concurrent orthogonal tandem catalysis.

Selective Photooxidation of a Mustard-Gas Simulant Catalyzed by a Porphyrinic Metal-Organic Framework.

The photooxidation of a mustard-gas simulant, 2-chloroethyl ethyl sulfide (CEES), is studied using a porphyrin-based metal-organic framework (MOF) catalyst. At room temperature and neutral pH value, singlet oxygen is generated by PCN-222/MOF-545 using an inexpensive and commercially available light-emitting diode. The singlet oxygen produced by PCN-222/MOF-545 selectively oxidizes CEES to the comparatively nontoxic product 2-chloroethyl ethyl sulfoxide (CEESO) without formation of the highly toxic sulfone product. In comparison to current methods, which utilize hydrogen peroxide as an oxidizing agent, this is a more realistic, convenient, and effective method for mustard-gas detoxification.

Tuning the emission lifetime in bis-cyclometalated iridium(III) complexes bearing iminopyrene ligands.

Bis-cyclometalated Ir(III) complexes with the general formula Ir(ppz)2(X^NPyrene), where ppz = 1-phenylpyrazole and X^NPyrene is a bidentate chelate with X = N or O, are reported. Modifications on the ancillary ligand containing pyrene drastically affect the emission lifetimes observed (0.329 to 104 µs). Extended emission lifetimes in these complexes compared to model complexes result from reversible electronic energy transfer or the observation of dual emission containing along-lived pyrene ligand-centered triplet ((3)LC) component. A combination of steady-state and time-resolved spectroscopic techniques are used to observe reversible electronic energy transfer in solution between the iridium core and pyrene moiety in the complex [Ir(ppz)2(NMe^NCH2Pyr)][PF6] (2), where NMe^NCH2Pyr = N-(pyren-1-ylmethyl)-1-(pyridin-2-yl)ethaneimine. Studies on [Ir(ppz)2(NMe^NCH2Pyr)][PF6] in a poly(methyl methacrylate) (PMMA) film reveal that reversible energy transfer is no longer effective, and instead, dual emission with a long-lived (3)LC component from pyrene is observed. Dual emission is observed in additional cyclometalated iridium complexes bearing pyrene-containing ancillary ligands N^NPyrene and O^NPyrene when the complexes are dispersed in a PMMA film.

Rare-earth acetates as alternative precursors for rare-earth cluster-based metal-organic frameworks.

RE-UiO-66 analogues are synthesized using RE acetates as precursors for the first time. These MOFs are fully characterized and the influence of the precursor on the materials obtained is studied. Additionally, the influence of water on the yield of the syntheses and the quality of the materials is explored.

Adsorptive removal of iodate oxyanions from water using a Zr-based metal-organic framework.

A Zr6-based metal-organic framework (MOF), MOF-808, is investigated for the adsorptive removal of IO3- from aqueous solutions, due to its high surface area and abundance of open metal sites. The uptake kinetics, adsorption capacity and binding mode are studied, showing a maximum uptake capacity of 233 mg g-1, the highest reported by any material.

Unravelling the synthesis of a rare-earth cluster-based metal-organic framework with spn topology.

Y-CU-45, an analogue of Zr-MOF-808, is synthesized for the first time. Several reaction conditions are tested demonstrating that two fluorinated modulators are required for a reproducible synthesis yielding high quality material. Y-CU-45 shows high crystallinity and surface area, shining light on the potential for rare-earth cluster-based MOFs with open metal sites.