Single Drop Whole Blood Diagnostics: Portable Biomedical Sensor for Cardiac Troponin I Detection.

Detection of disease biomarkers from whole blood is very important in disease prevention and management. However, new generation assays like point-of-care or mobile diagnostics face a myriad of challenges in detecting proteins from whole blood. In this research, we have designed, fabricated, and characterized a portable biomedical sensor for the detection of cardiac troponin I (cTnI) directly from whole blood, without sample pretreatments. The sensing methodology is based on an extended gate electrical double layer (EDL) gated field effect transistor (FET) biosensor that can offer very high sensitivity, a wide dynamic range, and high selectivity to target analyte. The sensing methodology is not impeded by electrostatic screening and can be applied to all types of FET sensors. A portable biomedical system is designed to carry out the diagnostic assay in a very simple and rapid manner, that allows the user to screen for target protein from a single drop of blood, in 5 min. This biomedical sensor can be used in hospitals and homes alike, for early detection of cTnI which is a clinical marker for acute myocardial infarction. This sensing methodology could potentially revolutionize the modern health care industry.

Investigation of C-terminal domain of SARS nucleocapsid protein-Duplex DNA interaction using transistors and binding-site models.

AlGaN/GaN high electron mobility transistors (HEMTs) were used to sense the binding between double stranded DNA (dsDNA) and the severe acute respiratory syndrome coronavirus (SARS-CoV) nucleocapsid protein (N protein). The sensing signals were the drain current change of the HEMTs induced by the protein-dsDNA binding. Binding-site models using surface coverage ratios were utilized to analyze the signals from the HEMT-based sensors to extract the dissociation constants and predict the number of binding sites. Two dissociation constants, K D1 = 0.0955 nM, K D2 = 51.23 nM, were obtained by fitting the experimental results into the two-binding-site model. The result shows that this technique is more competitive than isotope-labeling electrophoretic mobility shift assay (EMSA). We demonstrated that AlGaN/GaN HEMTs were highly potential in constructing a semiconductor-based-sensor binding assay to extract the dissociation constants of nucleotide-protein interaction.

Risk stratification of heart failure from one drop of blood using hand-held biosensor for BNP detection.

Continued risk assessment by evaluating cardiac biomarkers in healthy and unhealthy individuals can lower the mortality rate of cardiovascular diseases (CVDs). In this research, we have developed a hand-held biosensor system to rapidly screen for brain natriuretic peptide (BNP) from a single drop of whole blood. The sensor methodology is based on extended gate design of electrical double layer (EDL) field effect transistor (FET), that can directly detect BNP in whole blood, without extensive sample pre-treatments, thereby eliminating the limitations of charge screening in high ionic strength solutions. A simple sensor array chip is fabricated to integrate with the MOSFET sensor system. Sensing characteristics are elucidated using purified BNP samples in 1 × PBS (with 4% BSA), spiked BNP samples in whole blood and clinical whole blood samples. The blood cells can be gravitationally separated without the use of any external actuation. The sensor exhibits very high sensitivity over wide dynamic range of detection. The sensing characteristics are not adversely affected by the presence of background proteins or blood cells, even without gravitational blood cell separation. Thus, the biosensor system can allow users to perform rapid whole blood diagnostics with minimal user protocols, in 5 min. The features of high sensitivity, cost-effectiveness and convenience of usage empower this technology to revolutionize the mobile diagnostics and healthcare industry.

High sensitivity cardiac troponin I detection in physiological environment using AlGaN/GaN High Electron Mobility Transistor (HEMT) Biosensors.

In this study, we report the development of a high sensitivity assay for the detection of cardiac troponin I using electrical double layer gated high field AlGaN/GaN HEMT biosensor. The unique gating mechanism overcomes the drawback of charge screening seen in traditional FET based biosensors, allowing detection of target proteins in physiological solutions without sample processing steps. Troponin I specific antibody and aptamer are used as receptors. The tests carried out using purified protein solution and clinical serum samples depict high sensitivity, specificity and wide dynamic range (0.006-148ng/mL). No additional wash or sample pre-treatment steps are required, which greatly simplifies the biosensor system. The miniaturized HEMT chip is packaged in a polymer substrate and easily integrated with a portable measurement unit, to carry out quantitative troponin I detection in serum samples with < 2µl sample volume in 5min. The integrated prototype biosensor unit demonstrates the potential of the method as a rapid, inexpensive, high sensitivity CVD biomarker assay. The highly simplified protocols and enhanced sensor performance make our biosensor an ideal choice for point of care diagnostics and personal healthcare systems.

Beyond the Debye length in high ionic strength solution: direct protein detection with field-effect transistors (FETs) in human serum.

In this study, a new type of field-effect transistor (FET)-based biosensor is demonstrated to be able to overcome the problem of severe charge-screening effect caused by high ionic strength in solution and detect proteins in physiological environment. Antibody or aptamer-immobilized AlGaN/GaN high electron mobility transistors (HEMTs) are used to directly detect proteins, including HIV-1 RT, CEA, NT-proBNP and CRP, in 1X PBS (with 1%BSA) or human sera. The samples do not need any dilution or washing process to reduce the ionic strength. The sensor shows high sensitivity and the detection takes only 5 minutes. The designs of the sensor, the methodology of the measurement, and the working mechanism of the sensor are discussed and investigated. A theoretical model is proposed based on the finding of the experiments. This sensor is promising for point-of-care, home healthcare, and mobile diagnostic device.

Realization of an ultra-sensitive hydrogen peroxide sensor with conductance change of horseradish peroxidase-immobilized polyaniline and investigation of the sensing mechanism.

In this study, we fabricate an ultra-sensitive hydrogen peroxide sensor by using horseradish peroxidase (HRP)-immobilized conducting polymer, polyaniline (PANI). With the proposed detection mechanism, hydrogen peroxide first oxidizes HRP, which then oxidizes polyaniline, thus resulting in decreased conductivity of the polyaniline thin film. The reduced HRP can be further oxidized by hydrogen peroxide and the cycle of the oxidation/reduction would continue until all hydrogen peroxide are reacted, leading to the high sensitivity of the sensor due to the signal contributed from all hydrogen peroxide molecule. The detection limit of this sensor is only 0.7 nM. The detectable concentration of H2O2 is from 0.7 nM to 1 µM. Beyond 1 µM, the sensor gradually saturates and some H2O2 remains, indicating the inhibition of HRP activity at high concentration of H2O2. There is no response to hydrogen peroxide once the PANI is standalone without HRP immobilized, showing the enzymatic reaction is required in the process of hydrogen peroxide detection. The simple process for the sensor fabrication allows the sensor to be cost-effective and disposable. This electronic hydrogen peroxide sensor is promising in applications for low concentration hydrogen peroxide detections, such as the reactive oxygen species (ROS) in oxidative stress studies.

Detection of Severe Acute Respiratory Syndrome (SARS) Coronavirus Nucleocapsid Protein Using AlGaN/GaN High Electron Mobility Transistors.

AlGaN/GaN high electron mobility transistors (HEMTs) were used to detect the SARS coronavirus (SARS-CoV) nucleocapsid protein interaction without fluorescent labeling. The detection limit in our system was approximately 0.003 nM of protein sample. Our result showed that this technique was more competitive than isotope-labeling EMSA. We demonstrated AlGaN/GaN was highly potential in constructing a semiconductor-based-sensor binding assay to extract the dissociation constants of nucleic acid-protein interaction.

AlGaN/GaN high electron mobility transistors for protein-peptide binding affinity study.

Antibody-immobilized AlGaN/GaN high electron mobility transistors (HEMTs) were used to detect a short peptide consisting of 20 amino acids. One-binding-site model and two-binding-site model were used for the analysis of the electrical signals, revealing the number of binding sites on an antibody and the dissociation constants between the antibody and the short peptide. In the binding-site models, the surface coverage ratio of the short peptide on the sensor surface is relevant to the electrical signals resulted from the peptide-antibody binding on the HEMTs. Two binding sites on an antibody were observed and two dissociation constants, 4.404×10(-11) M and 1.596×10(-9) M, were extracted from the binding-site model through the analysis of the surface coverage ratio of the short peptide on the sensor surface. We have also shown that the conventional method to extract the dissociation constant from the linear regression of curve-fitting with Langmuir isotherm equation may lead to an incorrect information if the receptor has more than one binding site for the ligand. The limit of detection (LOD) of the sensor observed in the experimental result (~10 pM of the short peptide) is very close to the LOD (around 2.7-3.4 pM) predicted from the value of the smallest dissociation constants. The sensitivity of the sensor is not only dependent on the transistors, but also highly relies on the affinity of the ligand-receptor pair. The results demonstrate that the AlGaN/GaN HEMTs cannot only be used for biosensors, but also for the biological affinity study.