Activation-Induced Cytidine Deaminase Expression Facilitates the Malignant Phenotype and Epithelial-to-Mesenchymal Transition in Clear Cell Renal Cell Carcinoma.

Although advances have been made in the development of antiangiogenesis targeted therapy and surgery, metastatic clear cell renal cell carcinoma (ccRCC) is still incurable. Activation-induced cytidine deaminase (AID) is mainly expressed in a variety of germ and somatic cells, and induces somatic hypermutation and class-switch recombination, playing a vital role in antibody diversification. We confirmed that AID was expressed at a higher level in ccRCC tissues than in the corresponding nontumor renal tissues. We explored the impact of AID on ccRCC proliferation, invasion, and migration. In 769-p and 786-0 cells, expression of an AID-specific short hairpin RNA significantly reduced AID expression, which markedly inhibited tumor cell invasion, proliferation, and migration. Previous studies showed that AID is associated with Wnt ligand secretion mediator (WLS/GPR177), cyclin-dependent kinase 4 (CDK4), and stromal cell-derived factor-1 (SDF-1/CXCL12) regulation, which was further confirmed in human ccRCC tissues. Therefore, we studied the relationship between AID and these three molecules, and the impact of AID on epithelial-to-mesenchymal transition in ccRCC. WLS/GPR177, SDF-1/CXCL12, and CDK4 were sensitive to 5-azacytidine (a DNA demethylation agent), which reverted the inhibition of carcinogenesis caused by AID repression. In summary, AID is an oncogene that might induce tumorigenesis through DNA demethylation. Targeting AID may represent a novel therapeutic approach to treat metastatic ccRCC.

Highly Efficient and Stable Perovskite Solar Cells via Modification of Energy Levels at the Perovskite/Carbon Electrode Interface.

Perovskite solar cells (PSCs) have attracted great attention in the past few years due to their rapid increase in efficiency and low-cost fabrication. However, instability against thermal stress and humidity is a big issue hindering their commercialization and practical applications. Here, by combining thermally stable formamidinium-cesium-based perovskite and a moisture-resistant carbon electrode, successful fabrication of stable PSCs is reported, which maintain on average 77% of the initial value after being aged for 192 h under conditions of 85 °C and 85% relative humidity (the "double 85" aging condition) without encapsulation. However, the mismatch of energy levels at the interface between the perovskite and the carbon electrode limits charge collection and leads to poor device performance. To address this issue, a thin-layer of poly(ethylene oxide) (PEO) is introduced to achieve improved interfacial energy level alignment, which is verified by ultraviolet photoemission spectroscopy measurements. Indeed as a result, power conversion efficiency increases from 12.2% to 14.9% after suitable energy level modification by intentionally introducing a thin layer of PEO at the perovskite/carbon interface.

Flexible All-organic, All-solution Processed Thin Film Transistor Array with Ultrashort Channel.

Shrinking the device dimension has long been the pursuit of the semiconductor industry to increase the device density and operation speed. In the application of thin film transistors (TFTs), all-organic TFT arrays made by all-solution process are desired for low cost and flexible electronics. One of the greatest challenges is how to achieve ultrashort channel through a cost-effective method. In our study, ultrashort-channel devices are demonstrated by direct inkjet printing conducting polymer as source/drain and gate electrodes without any complicated substrate's pre-patterning process. By modifying the substrate's wettability, the conducting polymer's contact line is pinned during drying process which makes the channel length well-controlled. An organic TFT array of 200 devices with 2 µm channel length is fabricated on flexible substrate through all-solution process. The simple and scalable process to fabricate high resolution organic transistor array offers a low cost approach in the development of flexible and wearable electronics.

Highly Improved Efficiency of Deep-Blue Fluorescent Polymer Light-Emitting Device Based on a Novel Hole Interface Modifier with 1,3,5-Triazine Core.

We present an investigation of deep-blue fluorescent polymer light-emitting diodes (PLEDs) with a novel functional 1,3,5-triazine core material (HQTZ) sandwiched between poly(3,4-ethylene dioxythiophene):poly(styrene sulfonic acid) layer and poly(vinylcarbazole) layer as a hole injection layer (HIL) without interface intermixing. Ultraviolet photoemission spectroscopy and Kelvin probe measurements were carried out to determine the change of anode work function influenced by the HQTZ modifier. The thin HQTZ layer can efficiently maximize the charge injection from anode to blue emitter and simultaneously enhance the hole mobility of HILs. The deep-blue device performance is remarkably improved with the maximum luminous efficiency of 4.50 cd/A enhanced by 80% and the maximum quantum efficiency of 4.93%, which is 1.8-fold higher than that of the conventional device without HQTZ layer, including a lower turn-on voltage of 3.7 V and comparable Commission Internationale de L'Eclairage coordinates of (0.16, 0.09). It is the highest efficiency ever reported to date for solution-processed deep-blue PLEDs based on the device structure of ITO/HILs/poly(9,9-dialkoxyphenyl-2,7-silafluorene)/CsF/AL. The results indicate that HQTZ based on 1,3,5-triazine core can be a promising candidate of interfacial materials for deep-blue fluorescent PLEDs.

Improving the stability of bulk heterojunction solar cells by incorporating pH-neutral PEDOT:PSS as the hole transport layer.

In the application of traditional bulk heterojunction polymer solar cells, to prevent the etching of ITO by the acidic poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and thereby improve the device stability, pH-neutral PEDOT:PSS is introduced as the hole transport layer (HTL). After treating the neutral PEDOT:PSS with UV-ozone and with an oxygen plasma, the average power conversion efficiency (PCE) of the device increases from 3.44% to 6.60%. Such surface treatments reduce the energy level offset between the HTL and the active layer, which increases the open circuit voltage and enhances hole transportation, leading to the PCE improvement. Moreover, the devices with the neutral PEDOT:PSS HTL are more stable in air than those with the acidic PEDOT:PSS HTL. The PCE of the devices with the acidic PEDOT:PSS HTL decreases by 20% after 7 days and 45% after 50 days under ambient conditions, whereas the PCE of the devices with the pH-neutral PEDOT:PSS HTL decreases by only 9 and 20% after 7 and 50 days, respectively. X-ray photoelectron spectroscopy shows that the acidic PEDOT:PSS etches the indium from the indium-tin-oxide (ITO) electrode, which is responsible for the degradation of the device. In comparison, the diffusion of the indium is much slower in the devices with the pH-neutral PEDOT:PSS HTL.

Highly efficient, solution processed electrofluorescent small molecule white organic light-emitting diodes with a hybrid electron injection layer.

Highly efficient, solution-processed, and all fluorescent white organic light-emitting diodes (WOLEDs) based on fluorescent small molecules have been achieved by incorporating a low-conductivity hole injection layer and an inorganic-organic hybrid electron injection layer. The light-emission layer is created by doping a fluorescent π-conjugated blue dendrimer host (the zeroth generation dendrimer, G0) with a yellow-emitting fluorescent dopant oligo(paraphenylenevinylene) derivative CN-DPASDB with a doping ratio of 100:0.15 (G0:CN-DPASDB) by weight. To suppress excessive holes, the high-conductivity hole injection layer (PEDOT:PSS AI 4083) is replaced by the low-conductivity PEDOT:PSS CH 8000. To facilitate the electron injection, a hybrid electron injection layer is introduced by doping a methanol/water-soluble conjugated polymer poly[(9,9-bis(30-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)] (PFNR2) with solution-processed cesium fluoride (CsF). The device achieves a maximum luminous efficiency of 17.0 cd A(-1) and a peak power efficiency of 15.6 lm W(-1) at (0.32, 0.37) with a color rendering index of 64.