Canagliflozin alleviates pulmonary hypertension by activating PPARγ and inhibiting its S225 phosphorylation.

Pulmonary hypertension (PH) is a progressive fatal disease with no cure. Canagliflozin (CANA), a novel medication for diabetes, has been found to have remarkable cardiovascular benefits. However, few studies have addressed the effect and pharmacological mechanism of CANA in the treatment of PH. Therefore, our study aimed to investigate the effect and pharmacological mechanism of CANA in treating PH. First, CANA suppressed increased pulmonary artery pressure, right ventricular hypertrophy, and vascular remodeling in both mouse and rat PH models. Network pharmacology, transcriptomics, and biological results suggested that CANA could ameliorate PH by suppressing excessive oxidative stress and pulmonary artery smooth muscle cell proliferation partially through the activation of PPARγ. Further studies demonstrated that CANA inhibited phosphorylation of PPARγ at Ser225 (a novel serine phosphorylation site in PPARγ), thereby promoting the nuclear translocation of PPARγ and increasing its ability to resist oxidative stress and proliferation. Taken together, our study not only highlighted the potential pharmacological effect of CANA on PH but also revealed that CANA-induced inhibition of PPARγ Ser225 phosphorylation increases its capacity to counteract oxidative stress and inhibits proliferation. These findings may stimulate further research and encourage future clinical trials exploring the therapeutic potential of CANA in PH treatment.

[Mechanism of Notoginseng Radix et Rhizoma in regulating PI3K/Akt/mTORC1-mitochondrial energy metabolism to treat chronic renal failure in rats with blood stasis syndrome].

This study observed the effects of Notoginseng Radix et Rhizoma on the phosphatidylinositol 3-kinase(PI3K)/protein kinase B(Akt)/mammalian target of rapamycin complex 1(mTORC1) signaling pathway and mitochondrial energy metabolism in the rat model of adriamycin-induced renal fibrosis with blood stasis syndrome to explore the mechanism of Notoginseng Radix et Rhizoma in protecting the kidney. Thirty male rats with adriamycin-induced renal fibrosis were randomized into model, low-, medium-, and high-dose Notoginseng Radix et Rhizoma, and positive control groups(n=6). Six clean SD male rats were selected into the normal group. The normal group and model group were administrated with normal saline, and other groups with corresponding drugs. After 8 weeks of treatment, the renal function, renal pathology, adenosine triphosphate(ATP) levels, Na~+-K~+-ATPase and Ca~(2+)-Mg~(2+)-ATPase activities, and the protein levels of ATP5B, mTORC1, 70 kDa ribosomal protein S6 kinase(P70S6K), P85, Akt, p-Akt, and SH2-containing inositol phosphatase(SHIP2) in the renal tissue were determined. Compared with the normal group, the model group showed elevated levels of blood urea nitrogen(BUN) and serum creatinine(SCr)(P<0.01). Compared with the model group, Notoginseng Radix et Rhizoma and the positive control lowered the levels of BUN and SCr, which were significant in the medium-and high-dose Noto-ginseng Radix et Rhizoma groups and the positive control group(P<0.05). Compared with the model group, Notoginseng Radix et Rhizoma and the positive control alleviated the pathological changes in the renal tissue, such as vacuolar and fibroid changes, glomerulus atrophy, cystic expansion of renal tubules, and massive infiltration of inflammatory cells. Compared with the normal group, the model group showed decreased mitochondrial ATP content and Na~+-K~+-ATPase and Ca~(2+)-Mg~(2+)-ATPase activities in the renal tissue(P<0.05), and medium-and high-dose Notoginseng Radix et Rhizoma and positive control mitigated such decreases(P<0.05). Compared with the model group, medium-and high-dose Notoginseng Radix et Rhizoma and the positive control up-regulated the protein levels of ATP5B and SHIP2 and down-regulated the protein levels of mTORC1, P70S6K, P85, Akt, and p-Akt(P<0.05 or P<0.01 or P<0.001). Notoginseng Radix et Rhizoma may exert an anti-fibrosis effect by inhibiting the activation of the PI3K/Akt/mTORC1 pathway to restore mitochondrial energy metabolism, thus protecting the kidney.

Confinement of 1D Chain and 2D Layered CuI Modules in K-INA-R Frameworks via Coordination Assembly: Structure Regulation and Semiconductivity Tuning.

Herein, we present a new series of CuI-based hybrid materials with tunable structures and semiconducting properties. The CuI inorganic modules can be tailored into a one-dimensional (1D) chain and two-dimensional (2D) layer and confined/stabilized in coordination frameworks of potassium isonicotinic acid (HINA) and its derivatives (HINA-R, R = OH, NO2, and COOH). The resulting CuI-based hybrid materials exhibit interesting semiconducting behaviors associated with the dimensionality of the inorganic module; for instance, the structures containing the 2D-CuI module demonstrate significantly enhanced photoconductivity with a maximum increase of five orders of magnitude compared to that of the structures containing the 1D-CuI module. They also represent the first CuI-bearing hybrid chemiresistive gas sensors for NO2 with boosted sensing performance and sensitivity at multiple orders of magnitude over that of the pristine CuI. Particularly, the sensing ability of CuI-K-INA containing both 1D- and 2D-CuI modules is comparable to those of the best NO2 chemiresistors reported thus far.

Rational Engineering of p-n Heterogeneous ZnS/SnO2 Quantum Dots with Fast Ion Kinetics for Superior Li/Na-Ion Battery.

Constructing heterogeneous nanostructures is an efficient strategy to improve the electrical and ionic conductivity of metal chalcogenide-based anodes. Herein, ZnS/SnO2 quantum dots (QDs) as p-n heterojunctions that are uniformly anchored to reduced graphene oxides (ZnS-SnO2 @rGO) are designed and engineered. Combining the merits of fast electron transport via the internal electric field and a greatly shortened Li/Na ion diffusion pathway in the ZnS/SnO2 QDs (3-5 nm), along with the excellent electrical conductivity and good structural stability provided by the rGO matrix, the ZnS-SnO2 @rGO anode exhibits enhanced electronic and ionic conductivity, which can be proved by both experiments and theoretical calculations. Consequently, the ZnS-SnO2 @rGO anode shows a significantly improved rate performance that simple counterpart composite anodes cannot achieve. Specifically, high reversible specific capacities are achieved for both lithium-ion battery (551 mA h g-1 at 5.0 A g-1 , 670 mA h g-1 at 3.0 A g-1 after 1400 cycles) and sodium-ion battery (334 mA h g-1 at 5.0 A g-1 , 313 mA h g-1 at 1.0 A g-1 after 400 cycles). Thus, this strategy to build semiconductor metal sulfides/metal oxide heterostructures at the atomic scale may inspire the rational design of metal compounds for high-performance battery applications.

Efficient Co-Adsorption and Highly Selective Separation of Cs+ and Sr2+ with a K+ -Activated Niobium Germanate by the pH Control.

137 Cs and 90 Sr are hazardous to ecological environment and human health due to their strong radioactivity, long half-life, and high mobility. However, effective adsorption and separation of Cs+ and Sr2+ from acidic radioactive wastewater is challenging due to stability issues of material and the strong competition of protons. Herein, a K+ -activated niobium germanate (K-NGH-1) presents efficient Cs+ /Sr2+ coadsorption and highly selective Cs+ /Sr2+ separation, respectively, under different acidity conditions. In neutral solution, K-NGH-1 exhibits ultrafast adsorption kinetics and high adsorption capacity for both Cs+ and Sr2+ (qm Cs  = 182.91 mg g-1 ; qm Sr  = 41.62 mg g-1 ). In 1 M HNO3 solution, K-NGH-1 still possesses qm Cs of 91.40 mg g-1 for Cs+ but almost no adsorption for Sr2+ . Moreover, K-NGH-1 can effectively separate Cs+ from 1 M HNO3 solutions with excess competing Sr2+ and Mn + (Mn +  = Na+ , Ca2+ , Mg2+ ) ions. Thus, efficient separation of Cs+ and Sr2+ is realized under acidic conditions. Besides, K-NGH-1 shows excellent acid and radiation resistance and recyclability. All the merits above endow K-NGH-1 with the first example of niobium germanates for radionuclides remediation. This work highlights the facile pH control approach towards bifunctional ion exchangers for efficient Cs+ /Sr2+ coadsorption and selective separation.

Supramolecular-Interactions-Modulated Photoluminescence in Indium Bromide-Based Isomers.

Here, two isomeric ionic zero-dimensional indium bromide crystals of α (1)/ß (2)-[OPy][InBr4(Phen)] (OPy = N-octylpyridinium; Phen = 1,10-phenanthroline) have been isolated simply by changing the cooling conditions in solvothermal syntheses. Structural comparisons indicate their different supramolecular interactions, which can be confirmed by Hirshfeld surface analyses. The crystal 2 has additional hydrogen bonds and π-π interactions; as a result, the more compact stacking of 2 could result in a 10-fold higher photoluminescence (PL) quantum yield (PLQY) than that of 1. Density functional theory calculations confirm the electron transition from the inorganic moiety to the organic ligand, which provides a further understanding of the optical process. This work provides a new idea for designing PL indium-based halides by understanding the structure-PL relationship.

Mussel-Inspired Two-Dimensional Halide Perovskite Facilitated Dopamine Polymerization and Self-Adhesive Photoelectric Coating.

Polydopamine (PDA) is a good adhesion agent for lots of gels inspired by the mussel, whereas hybrid organic-inorganic perovskites (HOIPs) usually exhibit extraordinary optoelectronic performance. Herein, mussel-inspired chemistry has been integrated with two-dimensional HOIPs first, leading to the preparation of new crystal (HDA)2PbBr4 (1) (DA = dopamine). The organic cation dopamine can be introduced into PDA resulting in a thin film of (HPDA)2PbBr4 (PDA-1). The dissolved inorganic components of layered perovskite in DMF solution together with H2O2 addition can facilitate DA polymerization greatly. More importantly, PDA-1 can inherit an excellent semiconductor property of HOIPs and robust adhesion of the PDA hydrogel resulting in a self-adhesive photoelectric coating on various interfaces.

FGF10 mitigates doxorubicin-induced myocardial toxicity in mice via activation of FGFR2b/PHLDA1/AKT axis.

Doxorubicin is a common chemotherapeutic agent in clinic, but myocardial toxicity limits its use. Fibroblast growth factor (FGF) 10, a multifunctional paracrine growth factor, plays diverse roles in embryonic and postnatal heart development as well as in cardiac regeneration and repair. In this study we investigated the role of FGF10 as a potential modulator of doxorubicin-induced cardiac cytotoxicity and the underlying molecular mechanisms. Fgf10+/- mice and an inducible dominant negative FGFR2b transgenic mouse model (Rosa26rtTA; tet(O)sFgfr2b) were used to determine the effect of Fgf10 hypomorph or blocking of endogenous FGFR2b ligands activity on doxorubicin-induced myocardial injury. Acute myocardial injury was induced by a single injection of doxorubicin (25 mg/kg, i.p.). Then cardiac function was evaluated using echocardiography, and DNA damage, oxidative stress and apoptosis in cardiac tissue were assessed. We showed that doxorubicin treatment markedly decreased the expression of FGFR2b ligands including FGF10 in cardiac tissue of wild type mice, whereas Fgf10+/- mice exhibited a greater degree of oxidative stress, DNA damage and apoptosis as compared with the Fgf10+/+ control. Pre-treatment with recombinant FGF10 protein significantly attenuated doxorubicin-induced oxidative stress, DNA damage and apoptosis both in doxorubicin-treated mice and in doxorubicin-treated HL-1 cells and NRCMs. We demonstrated that FGF10 protected against doxorubicin-induced myocardial toxicity via activation of FGFR2/Pleckstrin homology-like domain family A member 1 (PHLDA1)/Akt axis. Overall, our results unveil a potent protective effect of FGF10 against doxorubicin-induced myocardial injury and identify FGFR2b/PHLDA1/Akt axis as a potential therapeutic target for patients receiving doxorubicin treatment.

A Cerium Organic Framework with {Cu2I2} Cluster and {Cu2I2}n Chain Modules: Structure and Fluorescence Sensing Properties.

In this work, a copper iodine module bearing a coordination polymer (CP) with a formula of [(Cu2I2)2Ce2(INA)6(DMF)3]·DMF (1, HINA = isonicotinic acid, DMF = N,N'-dimethyl formamide) is presented. The title compound features a three dimensional (3D) structure, in which the {Cu2I2} cluster and {Cu2I2}n chain modules are coordinated by N atoms from a pyridine ring in INA- ligands, while the Ce3+ ions are bridged by the carboxylic groups of INA- ligands. More importantly, compound 1 exhibits an uncommon red fluorescence (FL) with a single emission band maximized at 650 nm belonging to near infrared (NIR) luminescence. The temperature dependent FL measurement was applied to investigate the FL mechanism. Remarkably, 1 could be used as a FL sensor to cysteine and the nitro-bearing explosive molecule of trinitropheno (TNP) with high sensitivity, demonstrating its potential FL sensing applications for biothiol and explosive molecules.

A Soluble Porous Coordination Polymer for Fluorescence Sensing of Explosives and Toxic Anions under Homogeneous Environment.

In the past decades, porous coordination polymers (PCPs) based fluorescent (FL) sensors have received intense attention due to their promising applications. In this work, a soluble Zn-PCP is presented as a sensitive probe towards explosive molecules, chromate, and dichromate ions. In former reports, PCP sensors were usually ground into fine powders and then dispersed in solvents to form FL emulsion for sensing applications. However, their insoluble characters would cause the sensing accuracy which is prone to interference from environmental effects. While in this work, the as-made PCP could be directly soluble in organic solvents to form a clear solution with bright blue emission, representing the first soluble PCP based fluorescence sensor to probe explosive molecules under a homogeneous environment. Moreover, the FL PCP solution also shows sensitive detection behaviors towards the toxic anions of CrO42- and Cr2O72-, which exhibit a good linear relationship between the fluorescence intensity of Zn-PCP and the concentrations of both analytes. This work provides a reference for designing task-specific PCP sensors utilized under a homogeneous environment.

Structural Evolution and Properties of Praseodymium Antimony Oxochlorides Based on a Chain-like Tertiary Building Unit.

Unveiling the structural evolution of single-crystalline compounds based on certain building units may help greatly in guiding the design of complex structures. Herein, a series of praseodymium antimony oxohalide crystals have been isolated under solvothermal conditions via adjusting the solvents used, that is, [HN(CH2CH3)3][FeII(2,2'-bpy)3][Pr4Sb12O18Cl15]·EtOH (1) (2,2'-bpy = 2,2'-bipyridine), [HN(CH2CH3)3][FeII(2,2'-bpy)3]2[Pr4Sb12O18Cl14)2Cl]·N(CH2CH3)3·2H2O (2), and (H3O)[Pr4Sb12O18Cl12.5(TEOA)0.5]·2.5EtOH (3) (TEOA = mono-deprotonated triethanolamine anion). Single-crystal X-ray diffraction analysis revealed that all the three structures feature an anionic zig-zag chain of [Pr4Sb12O18Cl15-x]n as the tertiary building unit (TBU), which is formed by interconnections of praseodymium antimony oxochloride clusters (denoted as {Pr4Sb12}) as secondary building units. Interestingly, different arrangements or linkages of chain-like TBUs result in one-dimensional, two-dimensional layered, and three-dimensional structures of 1, 2, and 3, respectively, thus demonstrating clearly the structural evolution of metal oxohalide crystals. The title compounds have been characterized by elemental analysis, powder X-ray diffraction, thermogravimetric analysis, and UV-Vis spectroscopy, and the photodegradation for methyl blue in an aqueous solution of compound 1 has been preliminarily studied. This work offers a way to deeply understand the assembly process of intricate lanthanide-antimony(III) oxohalide structures at the atomic level.

Luminescence Enhancement and Temperature Sensing Properties of Hybrid Bismuth Halides Achieved via Tuning Organic Cations.

Bismuth-halide-based inorganic-organic hybrid materials (Bi-IOHMs) are desirable in luminescence-related applications due to their advantages such as low toxicity and chemical stability. Herein, two Bi-IOHMs of [Bpy][BiCl4(Phen)] (1, Bpy = N-butylpyridinium, Phen = 1,10-phenanthroline) and [PP14][BiCl4(Phen)]·0.25H2O (2, PP14 = N-butyl-N-methylpiperidinium), containing different ionic liquid cations and same anionic units, have been synthesized and characterized. Single-crystal X-ray diffraction reveals that compounds 1 and 2 crystallize in the monoclinic space group of P21/c and P21, respectively. They both possess zero-dimensional ionic structures and exhibit phosphorescence at room temperature upon excitation of UV light (375 nm for 1, 390 nm for 2), with microsecond lifetime (24.13 µs for 1 and 95.37 µs for 2). Hirshfeld surface analysis has been utilized to visually exhibit the different packing motifs and intermolecular interactions in 1 and 2. The variation in ionic liquids makes compound 2 have a more rigid supramolecular structure than 1, resulting in a significant enhancement in photoluminescence quantum yield (PLQY), that is, 0.68% for 1 and 33.24% for 2. In addition, the ratio of the emission intensities for compounds 1 and 2 shows a correlation with temperature. This work provides new insight into luminescence enhancement and temperature sensing applications involving Bi-IOHMs.

Reversible Luminescent Switching Induced by Heat/Water Treatment in a Zero-Dimensional Hybrid Antimony(â ¢) Chloride.

Recently zero-dimensional (0-D) inorganic-organic metal halides (IOMHs) have become a promising class of optoelectronic materials. Herein, we report a new photoluminescent (PL) 0-D antimony(III)-based IOMH single crystal, namely [H2BPZ][SbCl5]·H2O (BPZ = benzylpiperazine). Photophysical characterizations indicate that [H2BPZ][SbCl5]·H2O exhibits singlet/triplet dual-band emission. Density functional theory (DFT) calculations suggest that [H2BPZ][SbCl5]·H2O has the large energy difference between singlet and triplet states, which might induce the dual emission in this compound. Temperature-dependent PL spectra analyses suggest the soft lattice and strong electron-phonon coupling in this compound. Thermogravimetric analysis shows that the water molecules in the lattice of the title crystal could be removed by thermal treatment, giving rise to a dehydrated phase of [H2BPZ][SbCl5]. Interestingly, such structural transformation is accompanied by a reversible PL emission transition between red light (630 nm, dehydrated phase) and yellow light (595 nm, water-containing phase). When being exposed to an environment with 77% relative humidity, the emission color of the dehydrated phase was able to change from red to yellow within 20 s, and the red emission could be restored after reheating. The red to yellow emission switching could be achieved in acetone with water concentration as low as 0.2 vol%. The reversible PL transition phenomenon makes [H2BPZ][SbCl5]·H2O a potential material for luminescent water-sensing.

Single-Crystal Superstructures via Hierarchical Assemblies of Giant Rubik's Cubes as Tertiary Building Units.

Intricate superstructures possess unusual structural features and promising applications. The preparation of superstructures with single-crystalline nature are conducive to understanding the structure-property relationship, however, remains an intriguing challenge. Herein we put forward a new hierarchical assembly strategy towards rational and precise construction of intricate single-crystal superstructures. Firstly, two unprecedented superclusters in Rubik's cube's form with a size of ≈2×2×2 nm3 are constructed by aggregation of eight {Pr4 Sb12 } oxohalide clusters as secondary building units (SBUs). Then, the Rubik's cubes further act as isolable tertiary building units (TBUs) to assemble diversified single-crystal superstructures. Importantly, intermediate assembly states are captured, which helps illustrate the evolution of TBU-based superstructures and thus provides a profound understanding of the assembly process of superstructures at the atomic level.

Lithium Storage Performance Boosted via Delocalizing Charge in Znx Co1- x PS3 /CoS2 of 2D/3D Heterostructure.

A promising anode material consisting of bimetallic thiophosphate Znx Co1- x PS3 and CoS2 with 2D/3D heterostructure is designed and prepared by an effective chemical transformation. Density functional theory calculations illustrate that the Zn2+ can effectively modulate the electrical ordering of Znx Co1- x PS3 on the nanoscale: the reduced charge distribution emerging around the Zn ions can enhance the local built-in electric field, which will accelerate the ions migration rate by Coulomb forces and provide tempting opportunities for manipulating Li+ storage behavior. Moreover, the merits of the large planar size enable Znx Co1- x PS3 to provide abundant anchoring sites for metallic CoS2 nanocubes, generating a 2D/3D heterostructure with a strong electric field. The resultant Znx Co1- x PS3 /CoS2 can offer the combined advantages of bimetallic alloying and heterostructure in lithium storage applications, leading to outstanding performance as an anode material for lithium-ion batteries. Consequently, a high capacity of 794 mA h g-1 can be retained after 100 cycles at 0.2 A g-1 . Even at 3.0 A g-1 , a satisfactory capacity of 465 mA h g-1 can be delivered. The appealing alloying-heterostructure and electrochemical performance of this bimetallic thiophosphate demonstrate its great promise for applications in practical rechargeable batteries.

Targeting cyclin-dependent kinase 9 in cancer therapy.

Cyclin-dependent kinase (CDK) 9 associates mainly with cyclin T1 and forms the positive transcription elongation factor b (p-TEFb) complex responsible for transcriptional regulation. It has been shown that CDK9 modulates the expression and activity of oncogenes, such as MYC and murine double minute 4 (MDM4), and it also plays an important role in development and/or maintenance of the malignant cell phenotype. Malfunction of CDK9 is frequently observed in numerous cancers. Recent studies have highlighted the function of CDK9 through a variety of mechanisms in cancers, including the formation of new complexes and epigenetic alterations. Due to the importance of CDK9 activation in cancer cells, CDK9 inhibitors have emerged as promising candidates for cancer therapy. Natural product-derived and chemically synthesized CDK9 inhibitors are being examined in preclinical and clinical research. In this review, we summarize the current knowledge on the role of CDK9 in transcriptional regulation, epigenetic regulation, and different cellular factor interactions, focusing on new advances. We show the importance of CDK9 in mediating tumorigenesis and tumor progression. Then, we provide an overview of some CDK9 inhibitors supported by multiple oncologic preclinical and clinical investigations. Finally, we discuss the perspective and challenge of CDK9 modulation in cancer.

An Iron-NDC Framework with a Cage Structure and an Optothermal Conversion in NIR Window.

Pursuing novel materials with efficient photothermal conversion under irradiation at the near-infrared region windows (NIR, 750-850 nm; NIR-I and NIR-II, 1000-1320 nm)) is of great importance due to their irreplaceable applications, especially in the biomedical field. Herein, on the basis of a coordination chemistry strategy, an iron-based metal-organic framework (MOF) of [N(CH3)4]2[Fe3(NDC)4]·DMF·3H2O (Fe-NDC, 1,4-H2NDC = 1,4-naphthalenedicarboxylic acid, N(CH3)4+ = tetramethyl-ammonium, and DMF = N,N-dimethylformamide) was prepared and characterized. Due to the d-d transition effect introduced by coordination with the transition-metal ion of iron and the highly conjugated naphthalenic moiety in 1,4-H2NDC, guaranteeing an energy transfer between iron and the organic module, Fe-NDC shows a remarkable broad absorption, which could be extended into the NIR-II section. As a result, Fe-NDC could be irradiated by NIR laser (both 808 and 1064 nm) to achieve photothermal conversion. This work sets a good example to inspire the future designation of NIR light-irradiated photothermal materials based on the first-row transition metals.

Spacer Cation Alloying of a Homoconformational Carboxylate trans Isomer to Boost in-Plane Ferroelectricity in a 2D Hybrid Perovskite.

Two-dimensional (2D) hybrid perovskites of Ruddlesden-Popper (RP) lattices are recently booming as a vigorous class of ferroelectrics, whereas their intrinsic van der Waals gaps exert weak interactions that destabilize the layered motifs. Thus, it is an urgent challenge to reduce interlayered energy gaps to allow an exploration of stable RP ferroelectrics. Here, we propose hydrogen bonds to reduce van der Waals gaps of 2D RP-type perovskites while the ferroelectricity is retained. For the first time, a homoconformational trans isomer has been alloyed as the spacing cation of the 2D ferroelectric (t-ACH)2(EA)2Pb3Br10 (1, where t-ACH is 4-aminomethyl-1-cyclohexanecarboxylate and EA is ethylammonium). Strikingly, the strong O-H···O hydrogen bonds link adjacent spacing sheets to build a quasi-RP motif with a lower energy gap. In terms of ferroelectricity, the mixed-cation alloying has a crucial role in spontaneous polarization (Ps), as verified by structure analyses, quadratic optical nonlinearity, and electric hysteresis loops. The ordering of t-ACH+ and EA+ cations induces mmmFm symmetry breaking, along with an unusual in-plane Ps value of ∼2.9 µC/cm2 in the ac plane. In combination with the anisotropic nature of its 2D motif, this ferroelectricity creates strong linearly polarized light sensitivity with a large dichroism ratio of ∼3.2, far beyond those of most of the inorganic 2D systems. As far as we know, a 2D RP-type ferroelectric with a trans isomer cationic spacer is unprecedented, and the concept of reducing energy gaps via H-bonding interactions will strengthen the layered perovskite structure and shed light on the rational design of stable ferroelectrics toward photoelectric applications.

Multi-Dopant Engineering in Perovskite Cs2SnCl6: White Light Emitter and Spatially Luminescent Heterostructure.

Bi3+/Te4+ co-doped Cs2SnCl6 with dual emission spectrum (i.e., 450 and 575 nm) was achieved by a modified solution method, which can overcome the phase separation in the previous method for Cs2SnCl6 crystal growth. The two emission peaks arising from the two dopants Bi3+ and Te4+ have distinct photoluminescence (PL) lifetimes. Thus, the control of dopant ratio or PL delay time will regulate the PL intensity ratio between 450 and 575 nm peaks leading to adjustable emission color. The energy transfer between the two emission centers, which is confirmed by the optical spectra and PL lifetime, has a critical distance around 7.8 nm with a maximum of 50% transfer efficiency. The Bi3+/Te4+ co-doped Cs2SnCl6 with superior stability in water and aqua regia was fabricated into a single-phase white light-emitting diode. In the meantime, various luminescent heterostructures were obtained by epitaxial Cs2SnCl6 crystal growth with different dopants, which can broaden the study of composition engineering in halide perovskites.

Selective Luminescence Response of a Zero-Dimensional Hybrid Antimony(III) Halide to Solvent Molecules: Size-Effect and Supramolecular Interactions.

Zero-dimensional (0D) metal halides with solid-state luminescence switching (SSLS) have attracted attention as sensors and luminescent anticounterfeiting. Herein, selective solvent molecule response and accordingly luminescence switching were discovered in 0D [EtPPh3]2[SbCl5] (1, EtPPh3 = ethyltriphenylphosphonium). More than a dozen kinds of solvent molecules have been tested to find out the selection rule for molecule absorption in 1, which is demonstrated to be the size effect of guest molecules. Confirmed by crystal structural analysis, only the solvents with molecular volume less than 22.3 Å3 could be accommodated in 1 leading to the solvatochromic photoluminescence (PL). The mechanism of solvatochromic PL was also deeply studied, which was found to be closely related to the supramolecular interactions between solvent molecules and the host material. Different functional groups of the solvent molecule can affect its strength of hydrogen bonding with [SbCl5]2-, which is crucial for the distortion level of [SbCl5]2- unit and thus results in not only distinct solvatochromic PL but also distinct thermochromic PL. In addition, they all show typical self-trapped exciton triplet emissions. The additional supramolecular interactions from guest molecules can enhance the photoluminescence quantum yield to be as high as 95%.