RESUMEN
Pyrrolizidine alkaloids (PAs) are found to be toxic pollutants emitted into the environment by numerous plant species, resulting in contamination. In this article, we investigate the occurrence of PAs in the aquatic environment of small Swiss streams combining two different approaches. Pyrrolizidine alkaloids (PAs) are toxic secondary metabolites produced by numerous plant species. Although they were classified as persistent and mobile and found to be emitted into the environment, their occurrence in surface waters is largely unknown. Therefore, we performed a retrospective data analysis of two extensive HRMS campaigns each covering five small streams in Switzerland over the growing season. All sites were contaminated with up to 12 individual PAs and temporal detection frequencies between 36 and 87%. Individual PAs were in the low ng/L range, but rain-induced maximal total PA concentrations reached almost 100 ng/L in late spring and summer. Through PA patterns in water and plants, several species were tentatively identified as the source of contamination, with Senecio spp. and Echium vulgare being the most important. Additionally, two streams were monitored, and PAs were quantified with a newly developed, faster, and more sensitive LC-MS/MS method to distinguish different plant-based and indirect human PA sources. A distinctly different PA fingerprint in aqueous plant extracts pointed to invasive Senecio inaequidens as the main source of the surface water contamination at these sites. Results indicate that PA loads may increase if invasive species are sufficiently abundant.
Asunto(s)
Alcaloides de Pirrolicidina , Cromatografía Liquida , Humanos , Estudios Retrospectivos , Suiza , Espectrometría de Masas en TándemRESUMEN
Dissolved organic matter (DOM) strongly influences the properties and fate of engineered nanoparticles (ENPs) in aquatic environments. There is an extensive body of experiments on interactions between DOM and ENPs and also larger particles. [We denote particles on the nano- and micrometer scale as particulate matter (PM).] However, the experimental results are very heterogeneous, and a general mechanistic understanding of DOM-PM interactions is still missing. In this situation, recent reviews have called to expand the range of DOM and ENPs studied. Therefore, our work focuses on the diversity of the DOM and PM types investigated. Because the experimental results reported in the literature are highly disparate and difficult to structure, a new format of organizing, visualizing, and interpreting the results is needed. To this end, we perform a network analysis of 951 experimental results on DOM-PM interactions, which enabled us to analyze and quantify the diversity of the materials investigated. The diversity of the DOM-PM combinations studied has mostly been decreasing over the last 25 y, which is driven by an increasing focus on several frequently investigated materials, such as DOM isolated from fresh water, DOM in whole-water samples, and TiO2 and silver PM. Furthermore, there is an underrepresentation of studies into the effect of particle coating on PM-DOM interactions. Finally, it is of great importance that the properties of DOM used in experiments with PM, in particular the molecular weight and the content of aromatic and aliphatic carbon, are reported more comprehensively and systematically.
Asunto(s)
Monitoreo del Ambiente , Nanopartículas/química , Contaminantes Químicos del Agua/química , Carbono/química , Modelos Químicos , Peso Molecular , Nanopartículas/toxicidad , Compuestos Orgánicos/química , Compuestos Orgánicos/toxicidad , Plata/química , Solubilidad , Agua/química , Contaminantes Químicos del Agua/toxicidadRESUMEN
To protect themselves, plants can produce toxic secondary metabolites (phytotoxins) that appear with widely varying structures and negative effects. These phytotoxins often show similar properties as known aquatic micropollutants in terms of mobility, persistence, toxicity, and possibly also ecotoxicity. However, their occurrence in surface waters remains largely unknown, which is also due to unknown ability of available screening approaches to detect them. Therefore, we performed a target and suspect screening based on a persistence-mobility prioritization for phytotoxins in small Swiss creeks using high resolution mass spectrometry. In total, three of 26 targets were detected, three of 78 suspects tentatively identified, and six suspects fully confirmed by reference standards. To the best of our knowledge, it is the first time that three different plant secondary metabolite classes are detected in the same surface water sample. Estrogenic isoflavones were detected at 73% of the sites with formononetin as main toxin, which is in agreement with previous studies. Furthermore, pyrrolizidine alkaloids and the indole alkaloid gramine were detected. Especially pyrrolizidine alkaloids might be critical due to their production by various plants including the invasive Senecio inaequidens, and their known importance in food and feed safety. Based on these first screening results, different phytotoxin classes should be assessed for their ecotoxicological effects and considered in future water monitoring.
Asunto(s)
Agua/química , Espectrometría de Masas , Alcaloides de Pirrolicidina , Senecio , Toxinas BiológicasRESUMEN
The bisphenols S, F, and AF (BPS, BPF, and BPAF) are used to replace the endocrine disrupting chemical bisphenol A (BPA) while exerting estrogenic effects of comparable potency. We assessed the cumulative risk for the aforementioned BPs in Europe and compared the risk before and after the year 2011, which was when the first BPA restrictions became effective. For this, we probabilistically modeled external exposures from food, personal care products (PCPs), thermal paper, and dust (using the tools MCRA and PACEM for exposures from food and PCPs, respectively). We calculated internal concentrations of unconjugated BPs with substance-specific PBPK models and cumulated these concentrations normalized by estrogenic potency. The resulting mean internal cumulative exposures to unconjugated BPs were 3.8 and 2.1 ng/kg bw/day before and after restrictions, respectively. This decline was mainly caused by the replacement of BPA by BPS in thermal paper and the lower dermal uptake of BPS compared to BPA. However, the decline was not significant: the selected uncertainty intervals overlapped (P2.5-P97.5 uncertainty intervals of 2.7-4.9 and 1.3-6.3 ng/kg bw/day before and after restrictions, respectively). The upper uncertainty bounds for cumulative exposure were higher after restrictions, which reflects the larger uncertainty around exposures to substitutes compared to BPA.
Asunto(s)
Compuestos de Bencidrilo , Estrógenos , Estrona , Europa (Continente) , FenolesRESUMEN
Chlorinated paraffins are industrial chemicals that can be subdivided into short-chain (SCCP), medium-chain (MCCP), and long-chain (LCCP) chlorinated paraffins. The global production volumes of MCCPs are nowadays suspected to be much higher than those of S- and LCCPs, and the few available studies on the environmental occurrence of chlorinated paraffins report often higher MCCP concentrations than S- or LCCP concentrations in the environment. The present review focuses, therefore, on MCCPs specifically and provides a literature overview and a data analysis of the production volumes, PBT properties (persistence, bioaccumulation potential, and toxicity), and the worldwide measured concentrations of MCCP in environmental samples, biota, and humans. Furthermore, we include our own measurements of technical CP formulations from China, the major global producing country, to estimate the global production amounts of MCCPs. The key findings from this review are that (1) MCCPs are toxic to the aquatic environment, and the available data suggest that they are also persistent; (2) available time trends for MCCPs in soil, biota, and most of the sediment cores show increasing time trends over the last years to decades; and (3) MCCP concentrations in sediment close to local sources exceed toxicity thresholds (i.e., the PNEC). Our study shows that overall, MCCPs are of growing concern, and regulatory actions should be considered seriously.
Asunto(s)
Hidrocarburos Clorados , Parafina , China , Monitoreo del Ambiente , Humanos , SueloRESUMEN
Polychlorinated biphenyls (PCBs) are persistent hazardous chemicals that are still detected in the atmosphere and other environmental media, although their production has been banned for several decades. At the long-term monitoring site, Zeppelin at Spitsbergen, different PCB congeners have been continuously measured for more than a decade. However, it is not clear what factors determine the seasonal and interannual variability of different (lighter versus heavier) PCB congeners. To investigate the influence of atmospheric transport patterns on PCB-28 and PCB-101 concentrations at Zeppelin, we applied the Lagrangian Particle Dispersion Model FLEXPART and calculated "footprints" that indicate the potential source regions of air arriving at Zeppelin. By means of a cluster analysis, we assigned groups of similar footprints to different transport regimes and analyzed the PCB concentrations according to the transport regimes. The concentrations of both PCB congeners are affected by the different transport regimes. For PCB-101, the origin of air masses from the European continent is primarily related to high concentrations; elevated PCB-101 concentrations in winter can be explained by the high frequency of this transport regime in winter, whereas PCB-101 concentrations are low when air is arriving from the oceans. For PCB-28, in contrast, concentrations are high during summer when air is mainly arriving from the oceans but low when air is arriving from the continents. The most likely explanation of this finding is that local emissions of PCB-28 mask the effect of long-range transport and determine the concentrations measured at Zeppelin.
Asunto(s)
Contaminantes Atmosféricos , Monitoreo del Ambiente , Bifenilos Policlorados , Atmósfera , Océanos y Mares , SvalbardRESUMEN
A fundamental problem associated with the vertical transport of engineered nanomaterials (ENMs) in saturated porous media is the occurrence of nonexponential, for example, nonmonotonic or linearly increasing, retention profiles. To investigate this problem, we compiled an extensive database of ENMs transport experiments in saturated porous media. Using this database we trained a decision tree that shows the order of importance, and range of influence, of the physicochemical factors that control the retention profile shape. Our results help identify domains where current particle-transport models can be used, but also highlight, for the first time, large domains where nonexponential retention profiles dominate and new approaches are needed to understand ENM transport. Importantly, highly advective flow and high ENM influent mass can mask the influence of other physicochemical factors on the retention profile shape; notably, this occurs in 50% of the experiments investigated. Where the relationship between physicochemical factors and retention profile shape can be investigated in detail, our results agree with, and provide validation for, the current understanding of how these factors influence ENM transport.
Asunto(s)
Nanoestructuras/química , PorosidadRESUMEN
The reduction of emissions of mercury is a declared aim of the Minamata Convention, a UN treaty designed to protect human health and the environment from adverse effects of mercury. To assess the effectiveness of the convention in the future, better constraints about the current mercury emissions is a premise. In our study, we applied a top-down approach to quantify mercury emissions on the basis of atmospheric mercury measurements conducted at the remote high altitude monitoring station Jungfraujoch, Switzerland. We established the source-receptor relationships and by the means of atmospheric inversion we were able to quantify spatially resolved European emissions of 89 ± 14 t/a for elemental mercury. Our European emission estimate is 17% higher than the bottom-up emission inventory, which is within stated uncertainties. However, some regions with unexpectedly high emissions were identified. Stationary combustion, in particular in coal-fired power plants, is found to be the main responsible sector for increased emission estimates. Our top-down approach, based on measurements, provides an independent constraint on mercury emissions, helps to improve and refine reported emission inventories, and can serve for continued assessment of future changes in emissions independent from bottom-up inventories.
Asunto(s)
Carbón Mineral , Mercurio , Contaminantes Atmosféricos , Altitud , Monitoreo del Ambiente , Humanos , Centrales Eléctricas , InvestigaciónRESUMEN
Here a new global emission inventory of C4-C10 perfluoroalkanesulfonic acids (PFSAs) from the life cycle of perfluorooctanesulfonyl fluoride (POSF)-based products in 1958-2030 is presented. In particular, we substantially improve and expand the previous frameworks by incorporating missing pieces (e.g., emissions to soil through land treatment, overlooked precursors) and updating parameters (e.g., emission factors, degradation half-lives). In 1958-2015, total direct and indirect emissions of perfluorooctanesulfonic acid (PFOS) are estimated as 1228-4930 tonnes, and emissions of PFOS precursors are estimated as 1230-8738 tonnes and approximately 670 tonnes for x-perfluorooctanesulfonamides/sulfonamido ethanols (xFOSA/Es) and POSF, respectively. Most of these emissions occurred between 1958 and 2002, followed by a substantial decrease. This confirms the positive effect of the ongoing transition to phase out POSF-based products, although this transition may still require substantial time and cause substantial additional releases of PFOS (8-153 tonnes) and xFOSA/Es (4-698 tonnes) in 2016 to 2030. The modeled environmental concentrations obtained by coupling the emission inventory and a global multimedia mass-balance model generally agree well with reported field measurements, suggesting that the inventory captures the actual emissions of PFOS and xFOSA/Es for the time being despite remaining uncertainties. Our analysis of the key uncertainties and open questions of and beyond the inventory shows that, among others, degradation of side-chain fluorinated polymers in the environment and landfills can be a long-term, (potentially) substantial source of PFOS.
Asunto(s)
Fluorocarburos , Modelos Teóricos , Ambiente , Monitoreo del Ambiente , SueloRESUMEN
We report on two farms in Switzerland heavily contaminated by polychlorinated biphenyls (PCBs) and dioxins (PCDD/Fs), occurring in the first case from diffuse sources and in the second case from PCB-containing wall paint. Extensive measurements of PCBs and PCDD/Fs on site (soil, forage, and paint) and in cattle (blood, fat, and milk) allowed validation of our novel dynamic toxicokinetic model, which includes the transfer of contaminants from the mother cows to their suckling calf and the uptake of soil by grazing cattle. We show that for calves, the mother milk is the main uptake route of contaminants. For both cows and calves, ingestion of contaminated soil, although often overlooked, is an appreciable uptake path. The remediation of the contaminated stable lead to a 2-3 fold reduction of the PCB levels in animals within one year. The transfer of animals to an uncontaminated mountain site during summer proved to be an effective decontamination procedure with up to 50% reduction of the levels within three months. Our study calls for a rapid removal of PCB-containing materials in animal husbandry farms and shows that the diffuse contamination of soils will remain a source for PCBs and PCDD/Fs in our food chain for decades to come.
Asunto(s)
Dioxinas/química , Furanos/química , Bifenilos Policlorados/química , Contaminantes del Suelo/química , Crianza de Animales Domésticos , Animales , Benzofuranos , Bovinos , Dioxinas/farmacocinética , Femenino , Cadena Alimentaria , Furanos/farmacocinética , Lactancia , Bifenilos Policlorados/farmacocinética , Dibenzodioxinas Policloradas , Contaminantes del Suelo/farmacocinética , SuizaRESUMEN
The need for an environmental risk assessment for engineered nanomaterials (ENM) necessitates the knowledge about their environmental emissions. Material flow models (MFA) have been used to provide predicted environmental emissions but most current nano-MFA models consider neither the rapid development of ENM production nor the fact that a large proportion of ENM are entering an in-use stock and are released from products over time (i.e., have a lag phase). Here we use dynamic probabilistic material flow modeling to predict scenarios of the future flows of four ENM (nano-TiO2, nano-ZnO, nano-Ag and CNT) to environmental compartments and to quantify their amounts in (temporary) sinks such as the in-use stock and ("final") environmental sinks such as soil and sediment. In these scenarios, we estimate likely future amounts if the use and distribution of ENM in products continues along current trends (i.e., a business-as-usual approach) and predict the effect of hypothetical trends in the market development of nanomaterials, such as the emergence of a new widely used product or the ban on certain substances, on the flows of nanomaterials to the environment in years to come. We show that depending on the scenario and the product type affected, significant changes of the flows occur over time, driven by the growth of stocks and delayed release dynamics.
Asunto(s)
Contaminantes Ambientales , Nanoestructuras , Ambiente , Modelos Teóricos , SueloRESUMEN
Two small-scale field studies were conducted to investigate the transfer of substances from products into dust due to direct and air-mediated transfer. The project focused on semivolatile organic compounds (SVOCs), which are frequently found in and re-emitted from dust. For the field studies, four artificial products containing deuterium-labeled SVOCs (eight phthalates and adipates) were installed in residential indoor environments. Two plastic products were installed vertically to investigate substance transfer due to evaporation into air. One plastic product and a carpet were installed horizontally to investigate the direct transfer from source to dust. A pyrethroid was intentionally released by spraying a commercial spray. Dust samples were collected from the floor, elevated surfaces in the room and the surfaces of the horizontally installed products. We observed that the dust concentrations of substances exclusively transferred via air were similar at different collection sites, but the concentrations of chemicals present in horizontal products were up to 3 orders of magnitude higher in dust deposited on the source. We conclude that direct transfer from source into dust substantially increases the final SVOC concentration in dust in contact with the source, regardless of the vapor pressure of investigated SVOCs, and may lead to larger human exposure.
Asunto(s)
Contaminación del Aire Interior , Polvo , Humanos , Compuestos Orgánicos VolátilesRESUMEN
BACKGROUND: In recent years, the frequency of contact allergy to isothiazolinones has increased alarmingly in Europe, but only limited data are available on concentrations of isothiazolinones in consumer products. OBJECTIVES: To examine the current frequency of isothiazolinones [methylisothiazolinone (MI), methylchloroisothiazolinone (MCI), benzisothiazolinone (BIT), and octylisothiazolinone (OIT)] in a wide array of detergents and cosmetics relevant for the Swiss population. METHODS: By means of a market survey, the occurrence of isothiazolinones was investigated in 1948 consumer products. Of these, 88 products were analysed by liquid chromatography-high-resolution mass spectrometry after ultrasonic extraction. RESULTS: Only 7.6% of all cosmetics contained isothiazolinones, but the prevalence in detergents was much higher (42.9%). The measured concentration ranges in detergents were 4.310, 3.5279, 3.8186 and 7.9 ppm (one product only) for MCI, MI, BIT, and OIT, respectively [corrected]. For cosmetics, these were 1.3-133 and 4.8 ppm (one product only) for MI and MCI, respectively. CONCLUSIONS: Our study has shown that high concentrations of isothiazolinones (including MI) can be found in a large variety of products, in particular in detergents. Therefore, the safe use of these preservatives should be re-evaluated by including detergents in the exposure assessment.
Asunto(s)
Cosméticos/análisis , Detergentes/análisis , Tiazoles/análisis , Cromatografía Liquida , Cosméticos/efectos adversos , Cosméticos/química , Dermatitis Alérgica por Contacto/etiología , Detergentes/efectos adversos , Detergentes/química , Humanos , Espectrometría de Masas , Conservadores Farmacéuticos/efectos adversos , Conservadores Farmacéuticos/análisis , Suiza , Tiazoles/efectos adversosRESUMEN
Passive air samplers were deployed at 23 sites across the city of Zurich, Switzerland to investigate the spatial distribution of polychlorinated biphenyls (PCBs) in air. Concentrations of the six indicator PCBs (iPCBs) in air ranged from 54 to 3160 pg·m(-3) in the two sampling campaigns (spring 2011 and spring 2013). Measurements at two sampling sites were significantly higher than the median in both years, because of the proximity to primary PCB sources. Concentrations at most other stations were in a narrow range, suggesting that atmospheric PCB concentrations in Zurich are mainly caused by a high number of rather small sources. A correlation of iPCB concentrations in air with the number of buildings constructed between 1955 and 1975 in the surrounding areas of the sampling sites was observed. This demonstrates that PCB-containing building materials, such as joint sealants, influence PCB levels in urban air. Additionally, atmospheric iPCB concentrations were measured in the surrounding of a housing complex with PCB-contaminated joint sealants. Using a Gaussian diffusion model, annual iPCB emissions of 110-190 g were calculated for this housing complex. This appreciable amount released by a single building points out that more efforts are required to further eliminate remaining PCB stocks.
Asunto(s)
Movimientos del Aire , Contaminantes Atmosféricos/análisis , Monitoreo del Ambiente , Bifenilos Policlorados/análisis , Ciudades , Difusión , Modelos Estadísticos , SuizaRESUMEN
The need for an environmental risk assessment for engineered nanomaterials (ENM) necessitates the knowledge about their environmental concentrations. Despite significant advances in analytical methods, it is still not possible to measure the concentrations of ENM in natural systems. Material flow and environmental fate models have been used to provide predicted environmental concentrations. However, almost all current models are static and consider neither the rapid development of ENM production nor the fact that many ENM are entering an in-use stock and are released with a lag phase. Here we use dynamic probabilistic material flow modeling to predict the flows of four ENM (nano-TiO2, nano-ZnO, nano-Ag and CNT) to the environment and to quantify their amounts in (temporary) sinks such as the in-use stock and ("final") environmental sinks such as soil and sediment. Caused by the increase in production, the concentrations of all ENM in all compartments are increasing. Nano-TiO2 had far higher concentrations than the other three ENM. Sediment showed in our worst-case scenario concentrations ranging from 6.7 µg/kg (CNT) to about 40â¯000 µg/kg (nano-TiO2). In most cases the concentrations in waste incineration residues are at the "mg/kg" level. The flows to the environment that we provide will constitute the most accurate and reliable input of masses for environmental fate models which are using process-based descriptions of the fate and behavior of ENM in natural systems and rely on accurate mass input parameters.
Asunto(s)
Contaminantes Ambientales , Nanoestructuras/química , Ambiente , Modelos Teóricos , Suelo/químicaRESUMEN
Semivolatile organic compounds (SVOCs) can be released from products and distributed in the indoor environment, including air and dust. However, the mechanisms and the extent of substance transfer into air and dust are not well understood. Therefore, in a small-scale field study the transfer of nine SVOCs was investigated: Four artificial consumer products were doped with eight deuterium-labeled plasticizers (phthalates and adipates) and installed in five homes to investigate the emission processes of evaporation, abrasion, and direct transfer. Intentional release was studied with a commercial spray containing a pyrethroid. During the 12 week study, indoor air and settled dust samples were collected and analyzed. On the basis of our measurement results, we conclude that the octanol-air partitioning coefficient Koa is a major determinant for the substance transfer into either air or dust: A high Koa implies that the substance is more likely to be found in dust than in air. The emission process also plays a role: For spraying, we found higher dust and air concentrations than for evaporation. In contrast, apartment parameters like air exchange rate or temperature had just a minor influence. Another important mechanistic finding was that although transfer from product to dust currently is postulated to be mostly mediated by air, direct transport from product to dust on the product surface was also observed.
Asunto(s)
Contaminación del Aire Interior/análisis , Polvo/análisis , Compuestos Orgánicos Volátiles/análisis , Deuterio/análisis , Deuterio/química , Ácidos Ftálicos/química , Plastificantes/química , Compuestos Orgánicos Volátiles/químicaRESUMEN
In previous studies, the incorporation of polychlorinated biphenyls (PCBs) has been quantified in the accumulation areas of Alpine glaciers. Here, we introduce a model framework that quantifies mass fluxes of PCBs in glaciers and apply it to the Silvretta glacier (Switzerland). The models include PCB incorporation into the entire surface of the glacier, downhill transport with the flow of the glacier ice, and chemical fate in the glacial lake. The models are run for the years 1900-2100 and validated by comparing modeled and measured PCB concentrations in an ice core, a lake sediment core, and the glacial streamwater. The incorporation and release fluxes, as well as the storage of PCBs in the glacier increase until the 1980s and decrease thereafter. After a temporary increase in the 2000s, the future PCB release and the PCB concentrations in the glacial stream are estimated to be small but persistent throughout the 21st century. This study quantifies all relevant PCB fluxes in and from a temperate Alpine glacier over two centuries, and concludes that Alpine glaciers are a small secondary source of PCBs, but that the aftermath of environmental pollution by persistent and toxic chemicals can endure for decades.
Asunto(s)
Cubierta de Hielo , Bifenilos Policlorados , Monitoreo del Ambiente , Lagos , Modelos Teóricos , Suiza , Contaminantes Químicos del AguaRESUMEN
In the (S)-proline-mediated asymmetric hydrogenation of isophorone (IP) on supported Pd catalyst, excellent enantioselectivity is achieved, with an enantiomeric excess of up to 99%. The role of the heterogeneous catalyst has been the subject of a controversial debate, and the current mechanistic understanding cannot explain the observed enantioselectivity of this catalytic system. The lack of in situ information about the role of the heterogeneous catalyst has prompted us to investigate the surface processes occurring at the methanol-Pd catalyst interface using attenuated total reflection infrared spectroscopy. Time-resolved monitoring of the homogeneous solution and of the catalytic solid-liquid interface coupled with catalytic data provides crucial information on the catalytically relevant enantiodifferentiating processes. While the condensation of IP and the corresponding chiral product 3,3,5-trimethylcyclohexanone with the chiral amine is connected to the enantiodifferentiation, it was found that the crucial enantioselectivity-controlling steps take place on the metal surface, and the reaction has to be classified as heterogeneous asymmetric hydrogenation. The presented spectroscopic and catalytic results provide strong evidence for the existence of two competing enantioselective processes leading to opposing enantioselection. Depending on surface coverage of the Pd catalyst, the reaction is controlled either by kinetic resolution ((S)-pathway) or by chiral catalysis ((R)-pathway). Steering the hydrogenation on the (R)-reaction pathway requires sufficient concentration of IP-(S)-proline condensate, as this chiral reactive intermediate becomes the most abundant surface species, inhibiting the competing kinetic resolution. The unraveled (R)-reaction pathway emphasizes an intriguing strategy for inducing chirality in heterogeneous asymmetric catalysis.
Asunto(s)
Ciclohexanonas/química , Paladio/química , Prolina/química , Adsorción , Catálisis , Hidrogenación , Metanol/química , EstereoisomerismoRESUMEN
Ambient air concentrations of polychlorinated biphenyls (PCBs) in Zurich, Switzerland, are reported for the years 2011-2013. These measurements reveal a distinct seasonal trend with PCB concentrations in air during the summer that were three to five times higher than in the winter. We used a long-term dynamic multimedia model to analyze the seasonal trend and to back-calculate urban emissions of PCBs. In contrast to previous short-term studies that considered time periods of several days to months to extrapolate annual emissions, the use of long-term field data and the corresponding model reduces the uncertainty in these extrapolations. Comparison with measured PCB concentrations in air shows that our model is able to reproduce seasonal trends of the six indicator PCBs (iPCBs). The good agreement of the model results with measurements over a time period of three years provides confidence in model outputs and allows us to estimate the total annual PCB emissions of Zurich (86 µg capita(-1) d(-1)). The resulting summer emissions are nine times higher than emissions during winter. Interestingly, this factor corresponds to the expected increase in PCB volatilization due to the effect of temperature on vapor pressure. This finding implies that PCBs in Zurich are probably released mainly by volatilization from sources that are directly exposed to ambient air temperature (i.e., outdoor sources). The derived emissions are in accordance with previous studies performed at the same location and are also in agreement with an existing emission inventory.
Asunto(s)
Contaminantes Atmosféricos/análisis , Monitoreo del Ambiente/métodos , Modelos Teóricos , Bifenilos Policlorados/análisis , Ciudades , Monitoreo del Ambiente/estadística & datos numéricos , Estaciones del Año , Suiza , VolatilizaciónRESUMEN
We present results from a chemical fate model quantifying incorporation of polychlorinated biphenyls (PCBs) into the Silvretta glacier, a temperate Alpine glacier located in Switzerland. Temperate glaciers, in contrast to cold glaciers, are glaciers where melt processes are prevalent. Incorporation of PCBs into cold glaciers has been quantified in previous studies. However, the fate of PCBs in temperate glaciers has never been investigated. In the model, we include melt processes, inducing elution of water-soluble substances and, conversely, enrichment of particles and particle-bound chemicals. The model is validated by comparing modeled and measured PCB concentrations in an ice core collected in the Silvretta accumulation area. We quantify PCB incorporation between 1900 and 2010, and discuss the fate of six PCB congeners. PCB concentrations in the ice core peak in the period of high PCB emissions, as well as in years with strong melt. While for lower-chlorinated PCB congeners revolatilization is important, for higher-chlorinated congeners, the main processes are storage in glacier ice and removal by particle runoff. This study gives insight into PCB fate and dynamics and reveals the effect of snow accumulation and melt processes on the fate of semivolatile organic chemicals in a temperate Alpine glacier.