Development and evaluation of Artemisia vulgaris mucilage based polymeric network for controlled drug delivery.

The present study was conducted to fabricate and compare pH-sensitive polymeric networks of Artemisia vulgaris- Methacrylic acid using free radical polymerization conventional method and microwave-assisted method. Potassium persulphate and N' N'- Methylene bisacrylamide were employed as an initiator-crosslinker system. Swelling studies were performed at pH 1.2, 4.5, 6.8 and 7.4. Concentrations of polymer and monomer along with radiation dose were optimized as a function of swelling. Porosity and gel fraction were calculated for all samples. FTIR study confirmed the formation of cross-linked networks. Results of SEM indicated that the microwave irradiated polymeric network had a more porous structure. DSC and XRD study indicated the entrapment of drug inside the polymeric networks in amorphous form. In comparison to the conventional method, the polymeric network prepared by the microwave-assisted method exhibited high swelling ratios, porosity, thermal stability and drug release. These results signify microwave radiations as an effective alternative to the conventional heating method.

Chitosan based controlled release drug delivery of mycophenolate mofetil loaded in nanocarriers system: synthesis and in-vitro evaluation.

Background: Organ transplantation is an important and critical procedure, which requires the suppression of immunity, and to suppress the immunity, a constant plasma concentration of immunosuppressant is required.Objectives: The said objective can be achieved by formulating a controlled release drug delivery system of the drug. Chitosan (CHT) nanoparticles (NPs) have been revolutionizing the conventional drug delivery system, for the past two decades. The aim of the current research work was to develop and evaluate CHT-based mycophenolate mofetil (MMF) loaded nanoparticles (CHT/MMF-NPs) using different drug to polymer ratios.Methods: The challenge was to entrap a lipophilic drug within NPs by the ionic gelation method of the positively charged CHT, using tripolyphosphate (TPP) as the crosslinking agent. The prepared CHT/MMF-NPs were evaluated for physical and chemical characterizations, including particle size, surface charge, entrapment efficiency (EE), surface morphology by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) for chemical compatibilities, X-ray diffractometry (XRD) and in-vitro dissolution studies.Results: Outcomes of the studies revealed that particles were 260 ± 17 nm in diameter, with the smooth and regular surface. Satisfactory values of EE (99%) have indicated the suitability of selected ingredients and employed methodology. Moreover, FTIR has confirmed the chemical compatibilities of the formulations. In-vitro dissolution studies have indicated diffusion type of controlled and sustained drug release during 24 h, with zero-order, as best fit kinetic model.Conclusion: Conclusively, the successful achievement of objectives has indicated the suitability of excipients and methodology to prepare CHT/MMF-NPs for better therapeutic outcomes.

Stimuli-responsive/smart tablet formulations (under simulated physiological conditions) for oral drug delivery system based on glucuronoxylan polysaccharide.

Objective: Development of stimuli-responsive intelligent drug delivery system (based on a polysaccharide, glucuronoxylan [GX]) with on-off switching properties under physiological conditions.Significance: As GX exhibits high swelling index and stimuli-responsive swelling/de-swelling properties, therefore, this material appeared highly useful to design pH, solvent and ionic stress-sensitive oral tablet formulations, which offered on-off switching properties. In this way, we could design intelligent/smart drug delivery systems for levosulpiride (LS) and theophylline (TF) with valuable pharmaceutical properties.Methods: GX-based tablet formulations were explored for stimuli-responsive, reversible swelling-deswelling behavior, dynamic swelling, and its kinetics. Tablet surface and channeling after swelling were observed using scanning electron microscopy (SEM). Drug release study was performed mimicking the physiological conditions like pH and transit time of gastrointestinal tract (GIT). Radiographic images of tablet path (in vivo) were recorded.Results: GX-based formulations exhibited high swelling in deionized water (DW), pH 6.8 and 7.4 while negligible swelling at pH 1.2. SEM images discovered the presence of microcracks and nanopores on the surface of tablets and showed channeling after swelling of tablets in DW. Sustained drug release was observed and found directly proportional to the concentration of GX in the formulations with negligible release at pH 1.2. In vivo radiographic evaluation indicated the retention of tablets in GIT for 7 h. Hemocompatibility studies showed the non-thrombogenic and non-hemolytic nature of GX.Conclusions: GX-based smart/stimuli-responsive formulations can control/sustain the release of drugs in GIT.

Linseed hydrogel based floating drug delivery system for fluoroquinolone antibiotics: Design, in vitro drug release and in vivo real-time floating detection.

Herein, we designed a novel gastroretentive drug delivery system as floating matrix tablets based on a polysaccharide material from linseeds (Linum usitatissimum L.) for fluoroquinolone antibiotics. A number of formulations were designed with a combination of linseed hydrogel (LSH) and different excipients to obtain a desired sustained release profile of moxifloxacin. The drug release study was performed basically at pH 1.2. However, the tablet may pass through the stomach to intestine due to certain reasons then it also offered sustained drug release at intestinal pH 4.5, 6.8 and 7.4, as well. Results indicated that sustained moxifloxacin release was directly proportional to the concentration of LSH and the release of drug followed non-Fickian diffusion. SEM of the tablets indicated porous nature of LSH with elongated channels which contributed to the swelling of the tablet and then facilitated the discharge of moxifloxacin from the core of the tablet. In vivo X-ray study was performed to assess disintegration and real-time floating of tablet that confirmed its presence for 6 h in the stomach. These findings indicated that LSH can be used to develop novel gastroretentive sustained release drug delivery systems with the double advantage of sustained drug release at all pH of GIT.

Hydroxypropylcellulose-flurbiprofen conjugates: design, characterization, anti-inflammatory activity and enhanced bioavailability.

Herein, we report novel macromolecular prodrugs (MPDs) of flurbiprofen (FLB) onto a cellulose ether, hydroxypropylcellulose (HPC). The FLB was activated with a powerful acylation reagent carbonyldiimadazole (CDI) in N,N' dimethylacetamide (DMAc) solvent at room temperature. Imidazolide of FLB generated in situ reacts at 80 °C for 24 h with pre-dissolved HPC to prepare HPC-FLB conjugates. The resultant MPDs of FLB showed moderate to high degree of substitution (DS: 0.35-1.3) with good yield (70-82%). Structures were thoroughly characterized using FTIR, UV and NMR spectroscopic analyses. The pharmacokinetic studies showed that the t1/2 and tmax values of FLB from HPC-FLB conjugate were increased substantially as compare to standard FLB indicates enhanced bioavailability of drug after conjugate formation. Remarked anti-inflammatory activity of the HPC-FLB conjugate was also observed.

A comprehensive review of phytochemical profile, bioactives for pharmaceuticals, and pharmacological attributes of Azadirachta indica.

Azadirachta indica L. is a multipurpose medicinal tree of family Meliaceae. It occurs in tropical and semitropical regions of the world. Different parts of this miraculous tree are used to treat pyrexia, headache, ulcer, respiratory disorders, cancer, diabetes, leprosy, malaria, dengue, chicken pox, and dermal complications. The tree is popular for its pharmacological attributes such as hypolipidemic, antifertility, microbicidal, antidiabetic, anti-inflammatory, hepatoprotective, antipyretic, hypoglycemic, insecticidal, nematicidal, antiulcer, antioxidant, neuroprotective, cardioprotective, and antileishmaniasis properties. A. indica is also rich in various phytochemicals for pharmaceuticals such as alkaloids, steroids, flavonoids, terpenoids, fatty acids, and carbohydrates. The fungicidal potential of the tree is due to the presence of azadirachtin and nimbin. Herein, we have compiled a comprehensive review of phytochemical profile, pharmacological attributes, and therapeutic prospective of this multipurpose tree.

Evaluation of superabsorbent linseed-polysaccharides as a novel stimuli-responsive oral sustained release drug delivery system.

CONTEXT: Advancement in technology has transformed the conventional dosage forms to intelligent drug delivery systems. Such systems are helpful for targeted and efficient drug delivery with minimum side effects. Drug release from these systems is governed and controlled by external stimuli (pH, enzymes, ions, glucose, etc.). Polymeric biomaterial having stimuli-responsive properties has opened a new area in drug delivery approach. OBJECTIVE: Potential of a polysaccharide (rhamnogalacturonan)-based hydrogel from Linseeds (Linum usitatissimum L.) was investigated as an intelligent drug delivery material. MATERIALS AND METHODS: Different concentrations of Linseed hydrogel (LSH) were used to prepare caffeine and diacerein tablets and further investigated for pH and salt solution-responsive swelling, pH-dependent drug release, and release kinetics. Morphology of tablets was observed using SEM. RESULTS: LSH tablets exhibited dynamic swelling-deswelling behavior with tendency to swell at pH 7.4 and in deionized water while deswell at pH 1.2, in normal saline and ethanol. Consequently, pH controlled release of the drugs was observed from tablets with lower release (<10%) at pH 1.2 and higher release at pH 6.8 and 7.4. SEM showed elongated channels in swollen then freeze-dried tablets. DISCUSSION: The drug release was greatly influenced by the amount of LSH in the tablets. Drug release from LSH tablets was governed by the non-Fickian diffusion. CONCLUSIONS: These finding indicates that LSH holds potential to be developed as sustained release material for tablet.

Preparation and characterization of pH sensitive crosslinked Linseed polysaccharides-co-acrylic acid/methacrylic acid hydrogels for controlled delivery of ketoprofen.

Some pH responsive polymeric matrix of Linseed (Linum usitatissimum), L. hydrogel (LSH) was prepared by free radical polymerization using potassium persulfate (KPS) as an initiator, N,N-methylene bisacrylamide (MBA) as a crosslinker, acrylic acid (AA) and methacrylic acid (MAA) as monomers; while ketoprofen was used as a model drug. Different formulations of LSH-co-AA and LSH-co-MAA were formulated by varying the concentration of crosslinker and monomers. Structures obtained were thoroughly characterized using Fourier transforms infrared (FTIR) spectroscopy, XRD analysis and Scanning electron microscopy. Sol-gel fractions, porosity of the materials and ketoprofen loading capacity were also measured. Swelling and in vitro drug release studies were conducted at simulated gastric fluids, i.e., pH 1.2 and 7.4. FTIR evaluation confirmed successful grafting of AA and MAA to LSH backbone. XRD studies showed retention of crystalline structure of ketoprofen in LSH-co-AA and its amorphous dispersion in LSH-co-MAA. Gel content was increased by increasing MBA and monomer content; whereas porosity of hydrogel was increased by increasing monomer concentration and decreased by increasing MBA content. Swelling of copolymer hydrogels was high at pH 7.4 and low at pH 1.2. Ketoprofen release showed an increasing trend by increasing monomer content; however it was decreased with increasing MBA content. Sustained release of ketoprofen was noted from copolymers and release followed Korsmeyer-Peppas model.

Biological evaluation of synthetic α,ß-unsaturated carbonyl based cyclohexanone derivatives as neuroprotective novel inhibitors of acetylcholinesterase, butyrylcholinesterase and amyloid-ß aggregation.

A series of new α,ß-unsaturated carbonyl-based cyclohexanone derivatives was synthesized by simple condensation method and all compounds were characterized by using various spectroscopic techniques. New compounds were evaluated for their effects on acetylcholinesterase (AChE) and butyrylcholinesterase (BuChE). These compounds were also screened for in vitro cytotoxicity and for inhibitory activity for self-induced Aß1-42 aggregation. The effect of these compounds against amyloid ß-induced cytotoxicity was also investigated. The findings of in vitro experiment revealed that most of these compounds exhibited potent inhibitory activity against AChE and self-induced Aß1-42 aggregation. The compound 3o exhibited best AChE (IC50=0.037µM) inhibitory potential. Furthermore, compound 3o disassembled the Aß fibrils produced by self-induced Aß aggregation by 76.6%. Compounds containing N-methyl-4-piperidone linker, showed high acetylcholinesterase and self-induced Aß aggregation inhibitory activities as compared to reference drug donepezil. The pre-treatment of cells with synthetic compounds protected them against Aß-induced cell death by up to 92%. Collectively, these findings suggest that some compounds from this series have potential to be promising multifunctional agents for AD treatment and our study suggest the cyclohexanone derivatives as promising new inhibitors for AChE and BuChE, potentially useful to treat neurodegenerative diseases.

Mimosa pudica L., a High-Value Medicinal Plant as a Source of Bioactives for Pharmaceuticals.

Mimosa pudica Linn. (Family: Mimosaceae) is used as an ornamental plant due to its thigmonastic and nyctinastic movements. M. pudica is also used to avoid or cure several disorders like cancer, diabetes, hepatitis, obesity, and urinary infections. M. pudica is famous for its anticancer alkaloid, mimosine, along with several valuable secondary metabolites like tannins, steroids, flavonoids, triterpenes, and glycosylflavones. A wide array of pharmacological properties like antioxidant, antibacterial, antifungal, anti-inflammatory, hepatoprotective, antinociceptive, anticonvulsant, antidepressant, antidiarrheal, hypolipidemic activities, diuretic, antiparasitic, antimalarial, and hypoglycemic have been attributed to different parts of M. pudica. Glucuronoxylan polysaccharide extruded from seeds of M. pudica is used for drug release formulations due to its high swelling index. This review covers a thorough examination of functional bioactives as well as pharmacological and phytomedicinal attributes of the plant with the purpose of exploring its pharmaceutical and nutraceutical potentials.

Extraction, purification and characterization of the crystallin protein of cataractous eye lens nucleus.

The purpose of this study is to separate and identify the crystallin protein present in the nucleus of a human cataractous eye lens. Cataractous lenses were collected from different eye hospitals from patients of different etiologies with ages between 40 and 80 years. Lens nucleus proteins were extracted into four fractions on the basis of their solubility in different media by applying a reported method. These fractions were buffer-soluble proteins (PS), urea-soluble proteins (PU), yellow fraction proteins (PY) and insoluble proteins (PI). All three soluble fractions were subjected to HPLC and GPC analysis. Both HPLC and GPC analysis showed that each fraction contains α-, ß- and γ-crystallins, a major class of protein present in the lenses of vertebrates. Various chromatographic parameters including precision, accuracy and linearity have been evaluated. Studies of water-insoluble crystallins using sodium dodecylsulphate polyacrylamide gel electrophoresis (SDS-PAGE) have demonstrated extreme homogeneity with evidence of major components with molecular masses of 18-70 kDa, similar to the crystallin of the water-soluble portion. The method was found to be suitable for the analysis of various isomers of crystallin protein present in human cataractous eye lens nuclei. The detailed results of the GPC are discussed. This study provides the first HPLC and GPC analysis of a human cataractous eye lens nucleus.

Alhagi: a plant genus rich in bioactives for pharmaceuticals.

Alhagi, a plant genus from family Fabaceae, is widely distributed in many countries of Asia, Australia and Europe. Commonly known as camel thorn, Alhagi has many species famous for feed and folk medicinal uses. Different species of Alhagi such as Alhagi pseudalhagi, A. graecorum, A. sparsifolia, A. kirgisorum, A. maurorum, A. camelorum and A. persarum have been explored for their antioxidant potential and nutritive value along with various medicinal properties. A wide array of pharmacologically active secondary metabolites such as flavonoids, alkaloids (alhacidin and alhacin), steroids, pseudalhagin A, phospholipids and polysaccharides have been reported from different parts of Alhagi species. A broad range of biological activities such as antioxidant, cardiovascular, anti-ulcer, hepatoprotective, antispasmodic, antidiarrheal, antinociceptive, antipyretic, anti-inflammatory, anti-rheumatic, antibacterial and antifungal have been ascribed to different parts of Alhagi. In addition, Alhagi plants are also valued as a rich source of digestible protein and important minerals. This review focuses on the medicinal applications and detailed profile of high-value bioactive phytochemicals along with pharmacological attributes and therapeutic potential of these multi-purpose plants.

Succinate-bonded pullulan: An efficient and reusable super-sorbent for cadmium-uptake from spiked high-hardness groundwater.

Chemically modified pullulan was evaluated for its sorption efficiency and selectivity to remove cadmium (Cd) from spiked high-hardness groundwater (GW). Pullulan esterified with succinic anhydride using dimethylaminopyridine showed a fairly high degree of substitution value as confirmed by (1)H NMR spectroscopy. Pullulan succinate (Pull-Suc) was converted into the sodium salt (Pull-Suc-Na). The effect of contact time (5-200min) and pH (2-8) on Cd-uptake by the sorbent (Pull-Suc-Na) was investigated. The sorbent showed more than 90% Cd-removal in first 15min from distilled water (DW) and GW solution, respectively. Comparison of Pull-Suc-Na with other polysaccharidal sorbents suggested its high efficiency (DW 476.2mg/g and GW 454.5mg/g) and selectivity for the removal of Cd by an ion exchange mechanism, which is further supported by the negative Gibbs free energy values calculated from Langmuir isotherms. A Langmuir isotherm kinetic model provided the best fit for the sorption of Cd using Pull-Suc-Na. The sorbent showed a negligible decrease in Cd-uptake over three regeneration cycles. The thermal stability testing of the sorbents indicated that Pull-Suc-Na (sorbent) is more stable than Pull-Suc.

One pot light assisted green synthesis, storage and antimicrobial activity of dextran stabilized silver nanoparticles.

BACKGROUND: Green synthesis of nanomaterials finds the edge over chemical methods due to its environmental compatibility. Herein, we report green synthesis of silver nanoparticles (Ag NPs) mediated with dextran. Dextran was used as a stabilizer and capping agent to synthesize Ag NPs using silver nitrate (AgNO3) under diffused sunlight conditions. RESULTS: UV-vis spectra of as synthesized Ag nanoparticles showed characteristic surface plasmon band in the range from ~405-452 nm. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) studies showed spherical Ag NPs in the size regime of ~50-70 nm. Face centered cubic lattice of Ag NPs was confirmed by powder X-ray diffraction (PXRD). FT-IR spectroscopy confirmed that dextran not only acts as reducing agent but also functionalizes the surfaces of Ag NPs to make very stable dispersions. Moreover, on drying, the solution of dextran stabilized Ag NPs resulted in the formation of thin films which were found stable over months with no change in the plasmon band of pristine Ag NPs. The antimicrobial assay of the as synthesized Ag NPs showed remarkable activity. CONCLUSION: Being significantly active against microbes, the Ag NPs can be explored for antimicrobial medical devices.

Citric acid cross-linking of a hydrogel from Aloe vera (Aloe barbadensis M.) engenders a pH-responsive, superporous, and smart material for drug delivery.

The current research work is based on the evaluation of a citric acid (CA) cross-linked Aloe vera (Aloe barbadensis M.) leaf hydrogel (CL-ALH) for pH-dependent and sustained drug release application. The CA was used in different concentrations (1.25, 2.5, 5.0, and 10.0%) to cross-link the ALH using homogenous reaction conditions. The synthesis of CL-ALH was confirmed through Fourier transform and nuclear magnetic resonance spectroscopic studies. The thermal analysis indicated that the ALH and CL-ALH were stable and decomposed in two steps. The scanning electron microscopic images of CL-ALH confirmed its porous nature due to the presence of interconnected channeling. The swelling of CL-ALH was evaluated at pH 1.2, 6.8, and 7.4 as well as in deionized water (DW). High swelling of CL-ALH was observed in DW, and at pH 7.4 and 6.8 whereas, less swelling of CL-ALH was witnessed at pH 1.2. CL-ALH also exhibited swelling/deswelling behavior in DW and ethanol, DW and normal saline, and at pH 7.4 and 1.2. Tablets were prepared from CL-ALH as a release retarding agent demonstrating the sustained release of venlafaxine hydrochloride (VFX) for 8 h. Whereas, VFX was released within 4 h from the ALH-based tablet formulation (un-cross-linked material) indicating the prolonged and sustained release behavior of CL-ALH. The VFX was released from CL-ALH tablets and followed zero-order kinetics. The mechanism followed by VFX release from CL-ALH tablets was non-Fickian diffusion. The in vivo fate of the tablet formulation was observed through an X-ray study. The CL-ALH-based tablet safely passed through the stomach of a stray dog without any significant erosion and then disintegrated in the small intestine and colon. These findings confirmed that the CL-ALH is an effective excipient for designing a sustained-release drug delivery system for the small intestine and colon.

Nanoparticles incorporated hydrogels for delivery of antimicrobial agents: developments and trends.

The prevention and treatment of microbial infections is an imminent global public health concern due to the poor antimicrobial performance of the existing antimicrobial regime and rapidly emerging antibiotic resistance in pathogenic microbes. In order to overcome these problems and effectively control bacterial infections, various new treatment modalities have been identified. To attempt this, various micro- and macro-molecular antimicrobial agents that function by microbial membrane disruption have been developed with improved antimicrobial activity and lesser resistance. Antimicrobial nanoparticle-hydrogels systems comprising antimicrobial agents (antibiotics, biological extracts, and antimicrobial peptides) loaded nanoparticles or antimicrobial nanoparticles (metal or metal oxide) constitute an important class of biomaterials for the prevention and treatment of infections. Hydrogels that incorporate nanoparticles can offer an effective strategy for delivering antimicrobial agents (or nanoparticles) in a controlled, sustained, and targeted manner. In this review, we have described an overview of recent advancements in nanoparticle-hydrogel hybrid systems for antimicrobial agent delivery. Firstly, we have provided an overview of the nanoparticle hydrogel system and discussed various advantages of these systems in biomedical and pharmaceutical applications. Thereafter, different hybrid hydrogel systems encapsulating antibacterial metal/metal oxide nanoparticles, polymeric nanoparticles, antibiotics, biological extracts, and antimicrobial peptides for controlling infections have been reviewed in detail. Finally, the challenges and future prospects of nanoparticle-hydrogel systems have been discussed.

Stimuli-responsive glucuronoxylan polysaccharide from quince seeds for biomedical, food packaging, and environmental applications.

Mucilage is a gelatinous mixture of polysaccharides secreted from the seed coat and/or pericarp of many plant seeds when soaked in water. Mucilage affected seed germination while maintaining hydration levels during scarcity. Cydonia oblonga (quince) seeds are natural hydrocolloids extruding biocompatible mucilage mainly composed of polysaccharides. Quince seed mucilage (QSM) has fascinated researchers due to its applications in the food and pharmaceutical industries. On a commercial scale, QSM preserved the sensory and physiochemical properties of various products such as yogurt, desserts, cakes, and burgers. QSM is responsive to salts, pH, and solvents and is mainly investigated as edible coatings in the food industry. In tablet formulations, modified and unmodified QSM as a binder sustained the release of various drugs such as cefixime, capecitabine, diclofenac sodium, theophylline, levosulpiride, diphenhydramine, metoprolol tartrate, and acyclovir sodium. QSM acted as a reducing and capping agent to prepare nanoparticles for good antimicrobial resistance, photocatalytic characteristics, and wound-healing potential. The present review discussed the extraction optimization, chemical composition, stimuli-responsiveness, and viscoelastic properties of mucilage. The potential of mucilage in edible films, tissue engineering, and water purification will also be discussed.

Chemical modification of Aloe vera leaf hydrogel for efficient cadmium-removal from spiked high-hardness groundwater.

Herein, the hydrogel from the leaf of the Aloe vera plant (ALH) was succinylated (SALH) and saponified (NaSALH). The FTIR, solid-state CP/MAS 13C NMR, and SEM-EDX spectroscopic analyses witnessed the formation of SALH and NaSALH from ALH. The pHZPC for NaSALH was found to be 4.90, indicating the presence of -ve charge on its surface. The Cd2+ sorption efficiency of NaSALH was found to be dependent on pH, NaALH dose, Cd2+ concentration, contact time, and temperature. The maximum Cd2+ removal from DW and HGW was found to be 227.27 and 212.77 mg g-1 according to the Langmuir isothermal model (>0.99) at pH of 6, NaSALH dose of 40 mg g-1, Cd2+ concentration of 90 mg L-1, contact time of 30 min, and temperature of 298 K. The kinetic analysis of Cd2+ sorption data witnessed that the Cd2+ removal by chemisorption mechanism and followed pseudo-second-order kinetics (>0.99). The -ve values of ΔG° and ΔH° assessed the spontaneous and exothermic nature of sorption of Cd2+ by NaSALH. The regeneration and sorption/desorption studies indicated that the sorbent NaSALH is regenerable.

Pharmacological and Therapeutic Potential of Berbamine: A Potent Alkaloid from Genus Berberis.

Berbamine (Ber) is an active medicinal bisbenzylisoquinoline alkaloid, which is usually obtained from different plants of the genus Berberis (family Berberidaceae) and is used to cure various disorders in traditional Chinese and Ayurvedic systems of medicine. Numerous in-vitro and in-vivo studies revealed the apoptotic and cytotoxic potential of Ber against different cell lines (SMMC-7721, A549, MDA-MB-231, and K562) by upregulating pro-apoptotic (Bax, p53) and downregulating anti-apoptotic (Bcl-2, survivin) proteins. Other pharmacological attributes ascribed to Ber included cardioprotective, anti-diabetic, anti-inflammatory, antimalarial, antioxidant, anti-hypercholesterolemic, and anti-allergic. Moreover, the synergistic effect of Ber improved the therapeutic potential of different drugs (paclitaxel (PTL), gemcitabine, dexamethasone, doxorubicin (DOX), and celecoxib) in different models. Various attempts could fabricate biologically active derivatives of Ber, such as 4-chlorobenzoyl berbamine (CBB) and O-4- ethoxyl-butyl-berbamine (EBB). The review focuses on the medicinal applications of Ber, particularly anti-cancer, cardioprotective, and anti-inflammatory, along with the mechanism of action.

Structure, chemical modification, and functional applications of mucilage from Mimosa pudica seeds - A review.

Mimosa pudica (MP) is an ornamental plant due to seismonastic movements that close leaves and fall petioles in response to touch, wind, light, heat, cold, and vibration. The seeds of MP secrete smart, biocompatible, and non-toxic mucilage that has captivated researchers due to its widespread use in various fields such as pharmaceuticals and biotechnology. The mucilage is responsive to pH, salt solutions, and solvents and acts as a binder in tablet formulations for targeted drug delivery. The mucilage is chemically modifiable via acetylation, succinylation, and graft polymerization. Chemically modified MP mucilage appeared supersorbent for heavy metal ion uptake. Nanoparticles synthesized using mucilage as a reducing and capping agent displayed significant antimicrobial and wound-healing potential. Crosslinking of mucilage using citric acid as a crosslinking agent offers a sustained release of drugs. The present review is aimed to discuss extraction optimization, structure, modification, and the stimuli-responsive nature of mucilage. The review article will cover the potential of mucilage as emulsifying, suspending, bio-adhesive, gelling, and thickening agent. The role of mucilage as a capping and reducing agent for nanoparticles will also be discussed.