Interface Dynamics in Ag-Cu3P Nanoparticle Heterostructures.

Earth-abundant transition metal phosphides are promising materials for energy-related applications. Specifically, copper(I) phosphide is such a material and shows excellent photocatalytic activity. Currently, there are substantial research efforts to synthesize well-defined metal-semiconductor nanoparticle heterostructures to enhance the photocatalytic performance by an efficient separation of charge carriers. The involved crystal facets and heterointerfaces have a major impact on the efficiency of a heterostructured photocatalyst, which points out the importance of synthesizing potential photocatalysts in a controlled manner and characterizing their structural and morphological properties in detail. In this study, we investigated the interface dynamics occurring around the synthesis of Ag-Cu3P nanoparticle heterostructures by a chemical reaction between Ag-Cu nanoparticle heterostructures and phosphine in an environmental transmission electron microscope. The major product of the Cu-Cu3P phase transformation using Ag-Cu nanoparticle heterostructures with a defined interface as a template preserved the initially present Ag{111} facet of the heterointerface. After the complete transformation, corner truncation of the faceted Cu3P phase led to a physical transformation of the nanoparticle heterostructure. In some cases, the structural rearrangement toward an energetically more favorable heterointerface has been observed and analyzed in detail at the atomic level. The herein-reported results will help better understand dynamic processes in Ag-Cu3P nanoparticle heterostructures and enable facet-engineered surface and heterointerface design to tailor their physical properties.

Interface dynamics and crystal phase switching in GaAs nanowires.

Controlled formation of non-equilibrium crystal structures is one of the most important challenges in crystal growth. Catalytically grown nanowires are ideal systems for studying the fundamental physics of phase selection, and could lead to new electronic applications based on the engineering of crystal phases. Here we image gallium arsenide (GaAs) nanowires during growth as they switch between phases as a result of varying growth conditions. We find clear differences between the growth dynamics of the phases, including differences in interface morphology, step flow and catalyst geometry. We explain these differences, and the phase selection, using a model that relates the catalyst volume, the contact angle at the trijunction (the point at which solid, liquid and vapour meet) and the nucleation site of each new layer of GaAs. This model allows us to predict the conditions under which each phase should be observed, and use these predictions to design GaAs heterostructures. These results could apply to phase selection in other nanowire systems.

Enabling In Situ Studies of Metal-Organic Chemical Vapor Deposition in a Transmission Electron Microscope.

The world of environmental microscopy provides the possibility to study and analyze transformations and reactions during realistic conditions to understand the processes better. We report on the design and development of a metal-organic chemical vapor deposition (MOCVD) system integrated with an environmental transmission electron microscope intended for real-time investigations of crystal growth. We demonstrate methods for achieving a wide range of precisely controlled concentrations of precursor gas at the sample, as well as for calibrating the sample partial pressure using the pressure measured elsewhere in the microscope column. The influences of elevated temperature and reactive gas within the pole-piece gap are evaluated with respect to imaging and spectroscopy. We show that X-ray energy-dispersive spectroscopy can be strongly affected by temperatures beyond 500$^{\circ }$C, while the spatial resolution is largely unaffected by heat and microscope pressure for the relevant conditions. Finally, the influence of the electron beam on the investigated processes is discussed. With this work, we aim to provide crucial input in the development of advanced in situ electron microscopy systems for studies of complex reactions in real time under realistic conditions, for instance as used during formation of semiconductor crystals.

Post-nucleation evolution of the liquid-solid interface in nanowire growth.

We study usingin situtransmission electron microscopy the birth of GaAs nanowires from liquid Au-Ga catalysts on amorphous substrates. Lattice-resolved observations of the starting stages of growth are reported here for the first time. It reveals how the initial nanostructure evolves into a nanowire growing in a zincblende 〈111〉 or the equivalent wurtzite〈0001〉 direction. This growth direction(s) is what is typically observed in most III-V and II-VI nanowires. However, the reason for this preferential nanowire growth along this direction is still a dilemma. Based on the videos recorded shortly after the nucleation of nanowires, we argue that the lower catalyst droplet-nanowire interface energy of the {111} facet when zincblende (or the equivalent {0001} facet in wurtzite) is the reason for this direction selectivity in nanowires.

Evaluation of carrier density and mobility in Mn ion-implanted GaAs:Zn nanowires by Raman spectroscopy.

The fabrication of complex nanoscale electronics with reduced dimensions poses challenges on novel techniques to accurately determine fundamental electronic parameters. In this article, we present a universal contactless method based on Raman scattering for measuring the mobility and hole concentration independently in GaAs:Zn and Mn ion-implanted GaAs:Zn nanowires, potentially of great interest for spintronics applications. Clear coupled longitudinal optical phonon-plasmon modes were recorded and fitted with a dielectric function, based on the Drude model, which includes contributions from both plasmons and phonons. From the fitting, we extract accurate values of the plasma frequency and plasma damping constant from which we directly calculate the hole density and mobility, respectively. The extracted mobilities were also used as input data for analysis of complementary four-probe transport measurements, where the corresponding hole concentrations could be calculated and found to be in good agreement with those extracted directly from the Raman data. We also investigated the influence of annealing of the GaAs:Zn nanowires on the hole concentration and mobility and found strong indications of thermally activated defects related to a formed crystalline As/oxide shell around the nanowires. The method proposed here is extremely powerful for the characterization of nanoelectronics in general, and nanospintronics in particular for which Hall measurements are difficult to pursue due to problems related to contact formation, as well as to inherent magnetic properties of the devices.

Kinetics of Au-Ga Droplet Mediated Decomposition of GaAs Nanowires.

Particle-assisted III-V semiconductor nanowire growth and applications thereof have been studied extensively. However, the stability of nanowires in contact with the particle and the particle chemical composition as a function of temperature remain largely unknown. In this work, we use in situ transmission electron microscopy to investigate the interface between a Au-Ga particle and the top facet of an ⟨1̅1̅1̅⟩-oriented GaAs nanowire grown via the vapor-liquid-solid process. We observed a thermally activated bilayer-by-bilayer removal of the GaAs facet in contact with the liquid particle during annealing between 300 and 420 °C in vacuum. Interestingly, the GaAs-removal rates initially depend on the thermal history of the sample and are time-invariant at later times. In situ X-ray energy dispersive spectroscopy was also used to determine that the Ga content in the particle at any given temperature remains constant over extended periods of time and increases with increasing temperature from 300 to 400 °C. We attribute the observed phenomena to droplet-assisted decomposition of GaAs at a rate that is controlled by the amount of Ga in the droplet. We suggest that the observed transients in removal rates are a direct consequence of time-dependent changes in the Ga content. Our results provide new insights into the role of droplet composition on the thermal stability of GaAs nanowires and complement the existing knowledge on the factors influencing nanowire growth. Moreover, understanding the nanowire stability and decomposition is important for improving processing protocols for the successful fabrication and sustained operation of nanowire-based devices.

Raman characterization of single-crystalline Ga0.96Mn0.04As:Zn nanowires realized by ion-implantation.

Recent progress in the realization of magnetic GaAs nanowires (NWs) doped with Mn has attracted a lot of attention due to their potential application in spintronics. In this work, we present a detailed Raman investigation of the structural properties of Zn doped GaAs (GaAs:Zn) and Mn-implanted GaAs:Zn (Ga0.96Mn0.04As:Zn) NWs. A significant broadening and redshift of the optical TO and LO phonon modes are observed for these NWs compared to as-grown undoped wires, which is attributed to strain induced by the Zn/Mn doping and to the presence of implantation-related defects. Moreover, the LO phonon modes are strongly damped, which is interpreted in terms of a strong LO phonon-plasmon coupling, induced by the free hole concentration. Moreover, we report on two new interesting Raman phonon modes (191 and 252 cm-1) observed in Mn ion-implanted NWs, which we attribute to Eg (TO) and A1g (LO) vibrational modes in a sheet layer of crystalline arsenic present on the surface of the NWs. This conclusion is supported by fitting the observed Raman shifts for the SO phonon modes to a theoretical dispersion function for a GaAs NW capped with a dielectric shell.

Bending and Twisting Lattice Tilt in Strained Core-Shell Nanowires Revealed by Nanofocused X-ray Diffraction.

We have investigated strained GaAs-GaInP core-shell nanowires using transmission electron microscopy and nanofocused scanning X-ray diffraction. Nominally identical growth conditions for each sample were achieved by using nanoimprint lithography to create wafer-scale arrays of Au seed particles. However, we observe large individual differences, with neighboring nanowires showing either straight, bent, or twisted morphology. Using scanning X-ray diffraction, we reconstructed and quantified the bending and twisting of the nanowires in three dimensions. In one nanowire, we find that the shell lattice is tilted with respect to the core lattice, with an angle that increases from 2° at the base to 5° at the top. Furthermore, the azimuthal orientation of the tilt changes by 30° along the nanowire axis. Our results demonstrate how strained core-shell nanowire growth can lead to a rich interplay of composition, lattice mismatch, bending and lattice tilt, with additional degrees of complexity compared with thin films.

Low Trap Density in InAs/High-k Nanowire Gate Stacks with Optimized Growth and Doping Conditions.

In this paper, we correlate the growth of InAs nanowires with the detailed interface trap density (Dit) profile of the vertical wrap-gated InAs/high-k nanowire semiconductor-dielectric gate stack. We also perform the first detailed characterization and optimization of the influence of the in situ doping supplied during the nanowire epitaxial growth on the sequential transistor gate stack quality. Results show that the intrinsic nanowire channels have a significant reduction in Dit as compared to planar references. It is also found that introducing tetraethyltin (TESn) doping during nanowire growth severely degrades the Dit profile. By adopting a high temperature, low V/III ratio tailored growth scheme, the influence of doping is minimized. Finally, characterization using a unique frequency behavior of the nanowire capacitance-voltage (C-V) characteristics reveals a change of the dopant incorporation mechanism as the growth condition is changed.

Sn-seeded GaAs nanowires grown by MOVPE.

It has previously been reported that in situ formed Sn nanoparticles can successfully initiate GaAs nanowire growth with a self-assembled radial p-n junction composed of a Sn-doped n-type core and a C-doped p-type shell. In this paper, we investigate the effect of fundamental growth parameters on the morphology and crystal structure of Sn-seeded GaAs nanowires. We show that growth can be achieved in a broad temperature window by changing the TMGa precursor flow simultaneously with decreasing temperature to prevent nanowire kinking at low temperatures. We find that changes in the supply of both AsH3 and TMGa can lead to nanowire kinking and that the formation of twin planes is closely related to a low V/III ratio. From PL results, we observe an increase of the average luminescence energy induced by heavy doping which shifts the Fermi level into the conduction band. Furthermore, the doping level of Sn and C is dependent on both the temperature and the V/III ratio. These results indicate that using Sn as the seed particle for nanowire growth is quite different from traditionally used Au in for example growth conditions and resulting nanowire properties. Thus, it is very interesting to explore alternative metal seed particles with controllable introduction of other impurities.

III-V Nanowire Complementary Metal-Oxide Semiconductor Transistors Monolithically Integrated on Si.

III-V semiconductors have attractive transport properties suitable for low-power, high-speed complementary metal-oxide-semiconductor (CMOS) implementation, but major challenges related to cointegration of III-V n- and p-type metal-oxide-semiconductor field-effect transistors (MOSFETs) on low-cost Si substrates have so far hindered their use for large scale logic circuits. By using a novel approach to grow both InAs and InAs/GaSb vertical nanowires of equal length simultaneously in one single growth step, we here demonstrate n- and p-type III-V MOSFETs monolithically integrated on a Si substrate with high I(on)/I(off) ratios using a dual channel, single gate-stack design processed simultaneously for both types of transistors. In addition, we demonstrate fundamental CMOS logic gates, such as inverters and NAND gates, which illustrate the viability of our approach for large scale III-V MOSFET circuits on Si.

Sn-Seeded GaAs Nanowires as Self-Assembled Radial p-n Junctions.

The widespread use of Au as a seed particle in the fabrication of semiconductor nanowires presents a fundamental limitation to the potential incorporation of such nanostructures into electronic devices. Although several other growth techniques have been demonstrated, the use of alternative seed particle metals remains an underexplored but potentially very promising way to influence the properties of the resulting nanowires while simultaneously avoiding gold. In this Letter, we demonstrate the use of Sn as a seed particle metal for GaAs nanowires grown by metal-organic vapor phase epitaxy. We show that vertically aligned and stacking defect-free GaAs nanowires can be grown with very high yield. The resulting nanowires exhibit Esaki diode behavior, attributed to very high n-doping of the nanowire core with Sn, and simultaneous C-doping of the radial overgrowth. These results demonstrate that the use of alternative seed particle metals is a potentially important area to explore for developing nanowire materials with controlled material properties.

Confinement in thickness-controlled GaAs polytype nanodots.

Polytype nanodots are arguably the simplest nanodots than can be made, but their technological control was, up to now, challenging. We have developed a technique to produce nanowires containing exactly one polytype nanodot in GaAs with thickness control. These nanodots have been investigated by photoluminescence, which has been cross-correlated with transmission electron microscopy. We find that short (4-20 nm) zincblende GaAs segments/dots in wurtzite GaAs confine electrons and that the inverse system confines holes. By varying the thickness of the nanodots we find strong quantum confinement effects which allows us to extract the effective mass of the carriers. The holes at the top of the valence band have an effective mass of approximately 0.45 m0 in wurtzite GaAs. The thinnest wurtzite nanodot corresponds to a twin plane in zincblende GaAs and gives efficient photoluminescence. It binds an exciton with a binding energy of roughly 50 meV, including central cell corrections.

Crystal phase control in GaAs nanowires: opposing trends in the Ga- and As-limited growth regimes.

Here we demonstrate the existence of two distinct regimes for tuning crystal structure in GaAs nanowires from zinc blende to wurtzite using a single process parameter: V/III-ratio, or variation of the group V precursor flow. Extensive previous studies have shown that crystal structure is sensitive to V/III-ratio, and even that it is possible to change structure entirely using this single parameter. However, an open question has remained about whether the observed dependencies are related to growth technique or types of precursors used. Specifically, opposite trends have been reported for molecular beam epitaxy (MBE) and metal organic vapour phase epitaxy (MOVPE): while wurtzite GaAs growth is reported for high nominal V/III-ratio in MBE, zinc blende GaAs is formed in MOVPE under apparently the same parameter change (increasing precursor V/III-ratio). Here we show that these observations are not necessarily contradictory, as it may first appear, by providing a consolidated picture covering all regimes in one MOVPE growth machine only. More precisely, we observe wurtzite formation for medium nominal V/III-ratios with a critical sensitivity to the balance between Ga and As supply. Slight deviations from wurtzite conditions will result in zinc blende formation for either low V/III-ratio in the As-limited regime or high V/III-ratio in the Ga-limited regime. Our observations strongly indicate that the applied growth conditions are the crucial ingredients for crystal structure control in GaAs nanowires rather than the growth technique or precursors used.

FIB plan and side view cross-sectional TEM sample preparation of nanostructures.

Focused ion beam is a powerful method for cross-sectional transmission electron microscope sample preparation due to being site specific and not limited to certain materials. It has, however, been difficult to apply to many nanostructured materials as they are prone to damage due to extending from the surface. Here we show methods for focused ion beam sample preparation for transmission electron microscopy analysis of such materials, demonstrated on GaAs-GaInP core shell nanowires. We use polymer resin as support and protection and are able to produce cross-sections both perpendicular to and parallel with the substrate surface with minimal damage. Consequently, nanowires grown perpendicular to the substrates could be imaged both in plan and side view, including the nanowire-substrate interface in the latter case. Using the methods presented here we could analyze the faceting and homogeneity of hundreds of adjacent nanowires in a single lamella.

A general approach for sharp crystal phase switching in InAs, GaAs, InP, and GaP nanowires using only group V flow.

III-V-based nanowires usually exhibit random mixtures of wurtzite (WZ) and zinc blende (ZB) crystal structure, and pure crystal phase wires represent the exception rather than the rule. In this work, the effective group V hydride flow was the only growth parameter which was changed during MOVPE growth to promote transitions from WZ to ZB and from ZB to WZ. Our technique works in the same way for all investigated III-Vs (GaP, GaAs, InP, and InAs), with low group V flow for WZ and high group V flow for ZB conditions. This strongly suggests a common underlying mechanism. It displays to our best knowledge the simplest changes of the growth condition to control the nanowire crystal structure. The inherent reduction of growth variables is a crucial requirement for the interpretation in the frame of existing understanding of polytypism in III-V nanowires. We show that the change in surface energetics of the vapor-liquid-solid system at the vapor-liquid and liquid-solid interface is likely to control the crystal structure in our nanowires.

Magnetic polarons and large negative magnetoresistance in GaAs nanowires implanted with Mn ions.

We report on low-temperature magnetotransport and SQUID measurements on heavily doped Mn-implanted GaAs nanowires. SQUID data recorded at low magnetic fields exhibit clear signs of the onset of a spin-glass phase with a transition temperature of about 16 K. Magnetotransport experiments reveal a corresponding peak in resistance at 16 K and a large negative magnetoresistance, reaching 40% at 1.6 K and 8 T. The negative magnetoresistance decreases at elevated temperatures and vanishes at about 100 K. We interpret our transport data in terms of spin-dependent hopping in a complex magnetic nanowire landscape of magnetic polarons, separated by intermediate regions of Mn impurity spins, forming a paramagnetic/spin-glass phase.

In situ observations of size effects in GaAs nanowire growth.

Lateral dimensions of III-V nanowires are known to affect the growth dynamics and crystal structure. Investigations into size effects have in the past relied on theoretical models and post growth observations, which only give a limited insight into the growth dynamics. Here we show the first experimental investigation into how nanowire diameter affects the growth dynamics by growing Au-seeded GaAs nanowires in an environmental transmission electron microscope. This was done by recording videos of nanowires during growth and analysing the Ga-limited incubation time and As-limited step-flow time. Our data show that the incubation time is stable across the investigated diameter range aside from a sharp increase for the smallest diameter, whereas the step-flow time is observed to steadily increase across the diameter range. We show using a simple model that this can be explained by the increasing vapour pressure in the droplet. In addition to the existing understanding of nanowire growth at small dimensions being limited by nucleation this work provides experimental evidence that growth is also limited by the inability to finish the step-flow process.

Insights into the Synthesis Mechanisms of Ag-Cu3P-GaP Multicomponent Nanoparticles.

Metal-semiconductor nanoparticle heterostructures are exciting materials for photocatalytic applications. Phase and facet engineering are critical for designing highly efficient catalysts. Therefore, understanding processes occurring during the nanostructure synthesis is crucial to gain control over properties such as the surface and interface facets' orientations, morphology, and crystal structure. However, the characterization of nanostructures after the synthesis makes clarifying their formation mechanisms nontrivial and sometimes even impossible. In this study, we used an environmental transmission electron microscope with an integrated metal-organic chemical vapor deposition system to enlighten fundamental dynamic processes during the Ag-Cu3P-GaP nanoparticle synthesis using Ag-Cu3P seed particles. Our results reveal that the GaP phase nucleated at the Cu3P surface, and growth proceeded via a topotactic reaction involving counter-diffusion of Cu+ and Ga3+ cations. After the initial GaP growth steps, the Ag and Cu3P phases formed specific interfaces with the GaP growth front. GaP growth proceeded by a similar mechanism observed for the nucleation involving the diffusion of Cu atoms through/along the Ag phase toward other regions, followed by the redeposition of Cu3P at a specific Cu3P crystal facet, not in contact with the GaP phase. The Ag phase was essential for this process by acting as a medium enabling the efficient transport of Cu atoms away from and, simultaneously, Ga atoms toward the GaP-Cu3P interface. This study shows that enlightening fundamental processes is critical for progress in synthesizing phase- and facet-engineered multicomponent nanoparticles with tailored properties for specific applications, including catalysis.

Observation of the Multilayer Growth Mode in Ternary InGaAs Nanowires.

Au-seeded semiconductor nanowires have classically been considered to only grow in a layer-by-layer growth mode, where individual layers nucleate and grow one at a time with an incubation step in between. Recent in situ investigations have shown that there are circumstances where binary semiconductor nanowires grow in a multilayer fashion, creating a stack of incomplete layers at the interface between a nanoparticle and a nanowire. In the current investigation, the growth behavior in ternary InGaAs nanowires has been analyzed in situ, using environmental transmission electron microscopy. The investigation has revealed that multilayer growth also occurs for ternary nanowires and appears to be more common than in the binary case. In addition, the size of the multilayer stacks observed is much larger than what has been reported previously. The investigation details the implications of multilayers for the overall growth of the nanowires, as well as the surrounding conditions under which it has manifested. We show that multilayer growth is highly dynamic, where the stack of layers regularly changes size by transporting material between the growing layers. Another observation is that multilayer growth can be initiated in conjunction with the formation of crystallographic defects and compositional changes. In addition, the role that multilayers can have in behaviors such as growth failure and kinking, sometimes observed when creating heterostructures between GaAs and InAs ex situ, is discussed. The prevalence of multilayer growth in this ternary material system implies that, in order to fully understand and accurately predict the growth of nanowires of complex composition and structure, multilayer growth has to be considered.