Electrochemical removal of sulfate from petroleum produced water.

Petroleum produced water (PPW) is a waste-stream that entails huge cost on the petroleum industry. Along with other suspended and dissolved solids, it contains sulfate, which is a major hurdle for its alternative use intended toward enhanced oil recovery. This study proposes a two-step process for sulfate removal from PPW. A synthetic PPW was designed for the study using response surface methodology. During the first step, sulfate present in PPW was reduced to sulfide by anaerobic fermentation with 80% efficiency. In the second step, more than 70% of the accumulated sulfide was electrochemically oxidized. This integrated approach successfully removed sulfate from the synthetic wastewater indicating its applicability in the treatment of PPW and its subsequent applications in other oil field operations.

Bioleaching of nickel from spent petroleum catalyst using Acidithiobacillus thiooxidans DSM- 11478.

The present work deals with optimization of culture conditions and process parameters for bioleaching of spent petroleum catalyst collected from a petroleum refinery. The efficacy of Ni bioleaching from spent petroleum catalyst was determined using pure culture of Acidithiobacillus thiooxidans DSM- 11478. The culture conditions of pH, temperature and headspace volume to media volume ratio were optimized. EDX analysis was done to confirm the presence of Ni in the spent catalyst after roasting it to decoke its surface. The optimum temperature for A. thiooxidans DSM-11478 growth was found to be 32 degrees C. The enhanced recovery of nickel at very low pH was attributed to the higher acidic strength of sulfuric acid produced in the culture medium by the bacterium. During the bioleaching process, 89% of the Ni present in the catalyst waste could be successfully recovered in optimized conditions. This environment friendly bioleaching process proved efficient than the chemical method. Taking leads from the lab scale results, bioleaching in larger volumes (1, 5 and 10 L) was also performed to provide guidelines for taking up this technology for in situ industrial waste management.

Spatial patterns and climatic drivers of leaf spring phenology of maple in eastern North America.

The resurgent frequency of extreme weather events and their strongly distinctive spatial patterns lead to a growing interest in phenology as an indicator of tree susceptibility. Using a long-term chronology of observations collected in situ, we predicted and investigated the spatial patterns and environmental drivers of spring leaf phenology across maple stand polygons dominated by Acer saccharum Marsh. and/or Acer rubra L. in eastern North America for 2000-2018. Model' calibration was based on Bayesian ordinal regressions relating the timing of the phenological events' observations to the MODIS vegetation indices EVI, NDVI and LAI. DAYMET data have been extracted to compute temperature and precipitation during spring phenology. Model accuracy increased as the season progressed, with prediction uncertainty spanning from 9 days for bud swelling to 4 days for leaf unfolding. NDVI and LAI were the best predictors for the onset and ending of spring phenology, respectively. Bud swelling occurred at the end of March in the early stands and at the onset of May in the late stands, while leaf unfolding was completed at the beginning of April for the early and in mid-June for the late stands. Early and late stands polarized towards a south-west-north-east gradient. In the south-western regions, which are also the driest, total precipitation and minimum temperature explained respectively 73 % and 25 % of the duration of spring phenology. In the north-eastern regions, precipitation and minimum temperature explained 62 % and 26 % of the duration of spring phenology. Our results suggest high vulnerability to extreme weather events in stands located in the south-west of the species distribution. The increasing incidence of drought in these locations might affect spring phenology, decreasing net primary production in these stands. Warmer nights might expose the buds to late frosts, events that are expected to become more frequent in the coming years.

Bioelectrochemical approaches for removal of sulfate, hydrocarbon and salinity from produced water.

Produced water (PW) is the largest liquid waste stream generated during the exploration and drilling process of both the conventional hydrocarbon based resources like crude oil and natural gas, as well as the new fossil resources like shale gas and coal bed methane. Resource management, efficient utilization of the water resources, and water purification protocols are the conventionally used treatment methods applied to either treat or utilize the generated PW. This review provides a comprehensive overview of these conventional PW treatment strategies with special emphasises on electrochemical treatment. Key considerations associated with these approaches for efficient treatment of PW are also discussed. After a thorough assessment of the salient features of these treatment platforms, we propose a new strategy of uniquely integrating bioelectrochemical processes with biological system for more effective PW treatment and management.

Bio-electro catalytic treatment of petroleum produced water: Influence of cathode potential upliftment.

Treatment of petroleum produced water (PPW) was studied using bioelectrochemical system (BES) under uplifted cathode potential. The treatment efficiency in terms of COD and hydrocarbon removal was observed at 91.25% and 76.60% respectively, along with the reduction in TDS during BES operation under 400mV of cathode potential. There was also a reduction in concentration of sulfates, however, it was not significant at, since oxidative conditions are being maintained at anode. Improved oxidation of PPW at anode also resulted in good power output (-20.47mA) and also depicted improved fuel cell behaviour. The electrochemical analysis in terms of cyclic/linear sweep voltammetry also showed well correlation with the observed treatment efficiencies. The microbial dynamics of the BES after loading real field wastewater showed the dominance of species that are reported to be effective for petroleum crude oil degradation.

Influence of headspace composition on product diversity by sulphate reducing bacteria biocathode.

Mixed culture of sulphate reducing bacteria named TERI-MS-003 was used for development of biocathode on activated carbon fabric fastened to stainless steel mesh for conversion of volatile fatty acids to reduced organic compounds under chronoamperometric conditions of -0.85V vs. Ag/AgCl (3.5M KCl). A range of chemicals were bioelectrosynthesized, however the gases present in headspace environment of the bioelectrochemical reactor governed the product profile. Succinate, ethanol, hydrogen, glycerol and propionate were observed to be the predominant products when the reactor was hermetically sealed. On the other hand, acetone, propionate, isopropanol, propanol, isobutyrate, isovalerate and heptanoate were the predominant products when the reactor was continuously sparged with nitrogen. This study highlights the importance of head space composition in order to manoeuvre the final product profile desired during a microbial electro-synthesis operation and the need for simultaneously developing effective separation and recovery strategies from an economical and practical standpoint.

Enhanced performance of sulfate reducing bacteria based biocathode using stainless steel mesh on activated carbon fabric electrode.

An anoxic biocathode was developed using sulfate-reducing bacteria (SRB) consortium on activated carbon fabric (ACF) and the effect of stainless steel (SS) mesh as additional current collector was investigated. Improved performance of biocathode was observed with SS mesh leading to nearly five folds increase in power density (from 4.79 to 23.11 mW/m(2)) and threefolds increase in current density (from 75 to 250 mA/m(2)). Enhanced redox currents and lower Tafel slopes observed from cyclic voltammograms of ACF with SS mesh indicated the positive role of uniform electron collecting points. Differential pulse voltammetry technique was employed as an additional tool to assess the redox carriers involved in bioelectrochemical reactions. SRB biocathode was also tested for reduction of volatile fatty acids (VFA) present in the fermentation effluent stream and the results indicated the possibility of integration of this system with anaerobic fermentation for efficient product recovery.