Influence of biofilm carriers on membrane fouling propensity in moving biofilm membrane bioreactor.

In moving biofilm membrane bioreactor (MB-MBR) sponge carriers for biofilm growth were coupled with conventional submerged membrane bioreactor (C-MBR). This study compared the fouling propensity of C-MBR with MB-MBR and investigated factors affecting fouling variations in both the systems. Membrane fouling tendencies were monitored in terms of trans-membrane pressure (TMP) and the fouling characterization included membrane fouling resistances in situ and specific cake resistance (SCR) in batch filtration cell. Comparison of TMP profiles depicted prolong filtration periods in MB-MBR. Cake layer resistance (R(c)), pore blocking resistance (R(p)) as well as SCR were higher in C-MBR. The study reveals that hybrid biomass in MB-MBR creates relatively more porous cake structure in the absence of filamentous bacteria which were found in abundance in C-MBR. Filamentous bacteria were also responsible for the release of high concentration of carbohydrates in the form of soluble extra polymeric substance (EPS) contributing to higher R(p) in C-MBR.

Effect of powdered activated carbon (PAC) and cationic polymer on biofouling mitigation in hybrid MBRs.

In this study, the influence of powdered activated carbon (PAC) and cationic polymer (MPE50) was investigated on the fouling propensity in hybrid MBRs. Three laboratory scale MBRs were operated simultaneously including MBR(Control), MBR(PAC), and MBR(Polymer). Optimum dosages of PAC and polymer to the MBR(PAC) and MBR(Polymer), respectively were determined using jar tests. It was found that the MBR(PAC) exhibited low fouling tendency and prolonged filtration as compared to the other MBRs. Improved filtration in MBR(PAC) was attributed to the flocculation and adsorption phenomena. The effective stability of the biomass by PAC in the form of biological activated carbon (BAC) was verified by the increase in mean particle size. The BAC aided sludge layer exhibited porous cake structure resulting in the prolong filtration. However, both the membrane hybrid systems revealed effective adsorption of organic matter by 40% reduction in the soluble EPS concentration.

Performance of suspended and attached growth MBR systems in treating high strength synthetic wastewater.

The performance of laboratory-scale attached growth (AG) and suspended growth (SG) membrane bioreactors (MBRs) was evaluated in treating synthetic wastewater simulating high strength domestic wastewater. This study investigated the influence of sponge suspended carriers in AG-MBR system, occupying 15% reactor volume, on the removal of chemical oxygen demand (COD), total nitrogen (TN) and total phosphorus (TP), and compared it to that of SG-MBR. Results showed that the removal efficiencies of COD, TN and TP in AG-MBR were 98%, 89% and 58%, respectively as compared to 98%, 74% and 38%, respectively in SG-MBR. Improved TN removal in AG-MBR systems was primarily based on simultaneous nitrification and denitrification (SND) process. These results infer that the presence of small bio-particles having higher microbial activity and the growth of complex biomass captured within the suspended sponge carriers resulted in improved TN and TP removal in AG-MBR.