Determination of the size of quantum dots by fluorescence spectroscopy.

There has been a lack of quick, simple and reliable methods for determination of nanoparticle size. An investigation of the size of hydrophobic (CdSe) and hydrophilic (CdSe/ZnS) quantum dots was performed by using the maximum position of the corresponding fluorescence spectrum. It has been found that fluorescence spectroscopy is a simple and reliable methodology to estimate the size of both quantum dot types. For a given solution, the homogeneity of the size of quantum dots is correlated to the relationship between the fluorescence maximum position (FMP) and the quantum dot size. This methodology can be extended to the other fluorescent nanoparticles. The employment of evolving factor analysis and multivariate curve resolution-alternating least squares for decomposition of the series of quantum dots fluorescence spectra recorded by a specific measuring procedure reveals the number of quantum dot fractions having different diameters. The size of the quantum dots in a particular group is defined by the FMP of the corresponding component in the decomposed spectrum. These results show that a combination of the fluorescence and appropriate statistical method for decomposition of the emission spectra of nanoparticles may be a quick and trusted method for the screening of the inhomogeneity of their solution.

Quantification of compression wood severity in tracheids of Pinus radiata D. Don using confocal fluorescence imaging and spectral deconvolution.

Confocal fluorescence microscopy was used to examine the spectral characteristics of lignin autofluorescence in secondary cell walls of normal and compression wood from Pinus radiata. Using UV excitation, fluorescence spectra of normal and compression wood sections showed significant differences, especially in the outer secondary cell wall of tracheids, with a shift in maxima from violet to blue wavelengths between normal and compression wood. A comparison of normal wood, mild and severe compression wood, showed that the wavelength shift was intermediate in the mild compression wood compared to the severe compression wood, thus offering the possibility of quantifying the severity by measuring ratios of fluorescence at violet and blue wavelengths. Fluorescence induced by blue light, rather than UV, was less well differentiated amongst wood types. Spectral deconvolution indicated the presence of a minimum of five discrete lignin fluorophores in the cell walls of both normal and compression wood tracheids. Comparison with lignin model compounds suggest that the wavelength shift may correspond in part to increased levels of p-hydroxy type lignin in the compression wood samples. The combination of confocal fluorescence imaging and related spectral deconvolution therefore offers a novel technique for characterising cell wall lignin in situ.

Deconvolution of fluorescence spectra: contribution to the structural analysis of complex molecules.

Fluorescence spectroscopy is a sensitive analytical tool in the studies of both simple and complex molecular structures. In complex molecules, however, determining the number and position of components may give a specific insight into the structure, complementary to the other analytical techniques. We applied log-normal model to analyze fluorescence of simple monofluorophore molecule. In order to analyze spectra where both fluorophores and Raman emission bands were present, we developed a method obtained by combination of the symmetric, Gaussian, for Raman and asymmetric, log-normal model, for fluorescence, applicable to the molecules of different complexity. Technically, for each sample we varied excitation wavelength with 5 nm step and recorded the corresponding emission spectra. They were subsequently used for component analysis. Position of each component was plotted against the excitation wavelength. Applying this approach we could identify minimal number of components having stable positions, while their approximate probability density (APD) in a spectral series was correlated with the probable number of fluorophores in the molecule. The method was tested on molecules containing different number of fluorophores: monomers involved in the synthesis of plant polymer lignin-coniferyl alcohol (one fluorophore), ferulic acid (two fluorophores) and on lignin model compound produced from these monomers (many fluorophores). All investigated species belong to benzene-substituted class of compounds, and it is reasonable to assume that they have similar fluorescence band contour. We also report the results of environmental scanning electron microscopy (ESEM) studies showing multilayered dehydrogenative polymer (DHP) structure, in order to show complexity of the polymer. Our results present complementarity of these two approaches in the structural studies of the lignin model compound.

Component analysis of the fluorescence spectra of a lignin model compound.

In order to test whether lignin fluorescence originates from discrete fluorophores, fluorescence emission spectra of the lignin model dehydrogenative polymer (DHP) were analyzed by the band deconvolution method and time-resolved analysis of both the excitation and emission spectra. Two series of 22 fluorescence emission spectra of DHP in chloroform/methanol (3:1, v/v) solution, and as a solid suspension in water, were deconvoluted into three fluorescence and one Raman Gaussian components. Emission spectra were obtained by stepwise variation of the excitation wavelength from 360 to 465 nm. Deconvolution was performed by nonlinear fitting of all three Gaussian parameters: area, width and position. Position of all components in a series was treated as a random variable and its approximate probability distribution (APD) calculated from a series of histograms with increasing number of abscissa intervals. A five peak multimodal APD profile was obtained for both series of DHP emission spectra. The mean fluorescence lifetime varied with wavelength both in the emission and the excitation decay-associated spectra (DAS), where four kinetic components were resolved. The shapes of the excitation spectra of the four components were quite different and gradually shifted bathochromically. The multicomponent nature of the DHP emission spectra along with the changes in the mean fluorescence lifetime and the form of the excitation DAS of the four components give evidence of the heterogeneous origin of fluorescent species emitting in the visible.

New insights into the structural organization of the plant polymer lignin.

The organizational features of lignin structure and the mechanism of its synthesis have significant implications for the response of the plant to stress. It was unknown whether the enzymic formation of lignin in the cell wall is an uncontrolled process or finely regulated in time and space. In vitro scanning tunneling microscopy (STM), atomic force microscopies (AFM), near-field scanning optical microscopy (NSOM). and the novel environmental scanning electron microscopy (ESEM) imaging studies of the lignin model compounds have directly shown its highly ordered structure and elucidated its modular and fractal organization. Direct evidence was presented for the existence of strong intermolecular forces responsible for holding lignin globules together in highly ordered structures. Fractal analysis was applied as a theoretical approach, to show regularity and modular organization of lignin. Surface chemistry studies of the lignin monolayer reveal intrinsic properties that may be a key to osmotic pressure and cell size control mechanism in the higher plant cells. The obtained data contribute to the explanation of the mechanisms of cell wall synthesis in vivo.

ZL-DHP lignin model compound at the air-water interface.

In this paper we present our surface chemistry studies of enzymatically polymerized, poly-coniferyl alcohol lignin model compound (dehydrogenate polymer a.k.a. ZL-DHP) at the air-water interface. Using the CHCl(3)/MeOH (5:1 v/v) spreading solvent, we found an average molecular area of ZL-DHP of approximately 1200 A(2). The monolayer expresses a high compressibility with a collapsed area of 500 A(2) and collapsed surface pressure of 28 mN m(-1). In the range of applied surface pressures, ZL-DHP polymer have no phase changes, as shown by the very high linearity (R=0.994) of absorbance vs. surface pressure cure. There was no symmetry transitions observed as shown by absence of shifts of absorption peak maximums.

Study of the lignin model compound supramolecular structure by combination of near-field scanning optical microscopy and atomic force microscopy.

In this paper, we present a nanoscale study of the supramolecular structure of the dehydrogenate polymer (ZL-DHP) lignin model compound. The combination of near-field scanning optical microscopy (NSOM or SNOM) and atomic force microscopy (AFM) has been utilized to explore physicochemical properties of the lignin model compound on a scale ranging from individual macromolecules to globular supramolecular assemblies. By utilizing NSOM in transmission mode, the optical inhomogeneity in the lignin supramolecular structure has been observed for the first time. In particular, the transmission-mode NSOM images reveal a combination of hollow and layered supramolecular globular structure in the lignin model compound. Through the paired use of TappingMode and pulsed-mode AFM, we have also confirmed the existence of regions with different rheological properties on the single lignin model compound supramolecular assembly.

Interaction of the CdSe quantum dots with plant cell walls.

There is an increasing application of quantum dots (QDs) in plant science, as markers for the cells or their cell walls (CWs). In a plant cell the CW is a first target place for external agents. We studied interaction of CdSe QDs with CWs isolated from a conifer -Picea omorika (Panc) Purkyne branch. Binding of CdSe QDs was followed by using fluorescence microscopy, fluorescence and FT-IR spectroscopy. The aim of the study was to see whether the QDs induce structural changes in the CW, as well as to find out which kind of interactions between QDs and CWs occur and to which particular constituent polymers QDs preferably bind. The isolated CW is an appropriate object for study of the interactions with nanoparticles. The results show that in the CW, CdSe predominantly binds to cellulose, via OH groups and to lignin, via the conjugated CC/C-C chains. The differences in interaction of wet and dry CWs with QDs/chloroform were also studied. In the reaction of the dry CW sample with QDs/chloroform, hydrophobic interactions are dominant. When water was added after QDs/chloroform, hydrophilic interactions enable a partial reconstruction of the CC chains. The results have an implication on the use of the QDs in plant bio-imaging.

Application of asymmetric model in analysis of fluorescence spectra of biologically important molecules.

Having a valid mathematical model for structureless emission band shapes is important when deconvoluting fluorescence spectra of complex molecules. We propose a new asymmetric model for emission spectra of five organic molecules containing aromatic ring: catechol, coniferyl alcohol, hydroquinone, phenylalanine and tryptophan. For each molecule, a series of emission spectra, varying in excitation wavelength, were fitted with the new model as well as with two other analytical expressions: log-normal, described previously in the literature, and sigmoid-exponential. Their deconvolution into two, three and four Gaussian components was also performed, in order to estimate the number of symmetric components needed to obtain a better fitting quality than that of the asymmetric models. Four subtypes of the new model, as well as the log-normal one, did not differ significantly in their fitting errors, while the sigmoid-exponential model showed a significantly worse fit. Spectra of two mixtures: hydroquinone-coniferyl alcohol and hydroquinone-tryptophan were deconvoluted into two asymmetric and four Gaussian components. Positions of asymmetric components of mixtures matched those of separate molecules, while Gaussian did not. Component analysis of a polymer molecule, lignin, was also performed. In this more complex case asymmetric and Gaussian components also grouped in alternating positions.