Calix[4]arene-phosphine dimers: precursors of flexible metallo-capsules and self-compacting molecules.

The first diphosphines based on a double calixarene, namely 1,4 (or 1,3)-bis-(5-diphenylphosphino-25,26,27,28-tetrapropoxycalix[4]aren-17-yl)benzene (L(2), L(3)) were each prepared in four steps starting from 5,17-dibromo-25,26,27,28-tetrapropoxycalix[4]arene. Upon reaction of L(2) with [Au(tht)(thf)]BF(4), (tht = C(4)H(8)S) a rigid metallo-capsule was quantitatively formed, which adopts an oblique form owing to the distinct nature of the spacers linking the two calixarene half-spheres. In the solid state, the 1,4-substituted phenylene linker is turned towards the gold ion, suggesting the existence of weak bonding interactions between two aromatic CH protons of this ring and the metal centre (AuH =2.67 A). In contrast to this gold complex, the related silver complex shows dynamic behaviour in solution, the exchange between two enantiomeric oblique forms being facilitated by the greater stereochemical flexibility of Ag(I) vs. Au(I). A heteronuclear (109)Ag{(1)H} HMQC experiment established strong correlations between the CH protons of the phenylene linker and the (109)Ag ion. Dynamic behaviour similar to that observed for the silver complex was further observed in trans-[PtCl(2)L(2)], a chelate complex that could be obtained quantitatively from L(2) and [PtCl(2)(PhCN)(2)]. The intended formation of a chelate complex leading to a capsule with an endo-oriented metal centre was achieved by reacting L(3) with [Pd(allyl)(thf)(2)]BF(4). The complex thus formed constitutes the first organometallic transition metal complex embedded in a cavity with large portals. Binding of [RuCl(2)(p-cymene)] to L(2) and L(3) resulted in self-compacting bimetallic complexes in which each calixarene basket entraps a Ru(p-cymene) unit, thereby forming molecules occupying a minimal volume.

Playing with podands based on cone-shaped cavities. How can a cavity influence the properties of an appended metal centre?

The potential of molecules that combine the properties of a conical cavity with those of a covalently-linked transition-metal centre is highlighted through the assessment of cyclodextrin- and calixarene-derived podands ("cavitand" ligands) in coordination chemistry and catalysis. Metallocavitands with coordination sites directed towards the interior of the generic cavity provide interesting systems for studying host-guest complexation processes, their enhanced strength of metal-ion binding allowing for regioselective catalysis in a confined environment, and stabilisation of coordination complexes of unusual forms. Where cavitands have exo-oriented podand arms, the intrinsic dynamics of the cavity can dramatically modify metal chelation behaviour and the catalytic properties of the complexes. Such functionalised cavities are also useful as metal-ion transporters.

Directed Positioning of Organometallic Fragments Inside a Calix[4]arene Cavity.

A hemispherical diphosphane based on a calixarene allows encapsulation of reactive M-R fragments (M=transition metal; R=H, alkyl, CO) inside the calixarene cavity. The ruthenium complex 1 has an unprecedented sandwich structure that contains a CO ligand confined between two phosphane-substituted phenyl rings. The separation between the CO segment and the two aromatic rings is only 2.75 Å!

Binucleating behaviour of a proximally-diphosphinated calix[4]arene.

The long diphosphine 5,11-diphenylphosphanyl-25,26-dipropyloxy-27,28-bis(2-propenyloxy) calix[4]arene (cone) (5), in which the two phosphorus atoms are separated by a semi-rigid linking unit, was prepared in four steps starting from calix[4]arene. Reaction of 5 with AuCl(SEt(2)) or [RuCl(2)(p-cymene)](2) led to calixarenes bearing two metallated pendant arms, [5·(AuCl)(2)] and [5·{RuCl(2)(p-cymene)}(2)], respectively. In the presence of AgBF(4) or [Ni(C(5)H(5))(1,5-cyclooctadiene)]BF(4), diphosphine 5 displayed a marked tendency to form oligomeric material, but under high dilution conditions dimeric species were obtained selectively. The inability of 5 to form chelate complexes was further illustrated by its reaction with [PdCl(2)(1,5-cyclooctadiene)(2)], which led quantitatively to a rare complex in which a diphosphine spans across the dinuclear [PdCl(µ-Cl)(2)PdCl] unit.

Calix[4]arene daisychains.

Generic calix[4]arenes became readily accessible in the late 70s. With their potential eight anchoring points, their utility for the production of sophisticated, highly functionalised macrocyclic molecules was rapidly recognised. While most studies in calixarene chemistry have focused on monocalixarene derivatives, there is now an increasing interest in developing multicalixarene compounds, especially those made of several linearly-arranged calix[4]arene units, the first examples of which were reported in 1989. This critical review will present the most important synthetic routes to such molecules together with an analysis of the properties that such cavity combinations may induce. In particular it will be shown that the nature of the links between the calixarene units plays a determinant role in the product properties and that singly-linked calixarenes can be exploited in varied applications, including those as efficient receptors of large molecules, as electrochemical and luminescent sensors in ion detection, or as new materials allowing capsule formation suitable for the storage of small guests (82 references).

Calixarene-monophosphines as supramolecular chelators.

The calix[4]arenes 5-diphenylphosphino-17-R1-11,23-diR2-25,26,27,28-tetrapropoxycalix[4]arene (1, R1 = R2 = Br; 2, R1 = Br, R2 = H; 3, R1 = R2 = p-tolyl; 4, R1 = p-tolyl, R2 = H; 5, R1 = R2 = H; 20, R1 = p-tolyl, R2 = H), all bearing a diphenylphosphino group attached to the calixarene upper rim, have been synthesised starting from 5,11,17,23-tetrabromo-25,26,27,28-tetrapropoxycalix[4]arene. Reaction of 1-5 with [RuCl2(p-cymene)]2 leads quantitatively to monophosphine complexes, [RuCl2(p-cymene)L], in which the endo-oriented ruthenium atom unit sits inside the cone delineated by the four phenoxy rings. The particular orientation of the P-Ru vector appears to result from pi-pi interactions between the p-cymene ligand and two aromatic cavity walls. Overall, in each case the calixarene end of the ligand behaves as a supramolecular receptor towards the Ru(p-cymene) fragment. Formation of complexes with exo-oriented P-M bonds were observed in the complexes cis-[PtCl2 x 1(2)] and in [RuCl2(p-cymene) x 20]. As shown by a variable temperature study carried out on [RuCl2(p-cymene) x 3], in which the ruthenium is embedded in an expanded cone, the p-cymene ring undergoes a fast oscillation about the Ru-arene bond which can be frozen out at low temperatures. Reaction of [RuCl2(p-cymene) x 3] with AgBF4 in CH3CN results in an intra-cavity reaction, with one chloride ligand being replaced by acetonitrile.

Ethylene oligomerisation and polymerisation with nickel phosphanylenolates bearing electron-withdrawing substituents: Structure-reactivity relationships.

Three SHOP-type catalysts, in which the C=C(O) double bond was substituted by electron-withdrawing substituents, [Ni{Ph2PC(R1)=C(R2)O}Ph(PPh3)] (2: R1,R2 = -C(Me)=NN(Ph)-; 3: R1 = CO2Et, R2 = Ph; 4: R1 = CO2Et, R2 = CF3), were assessed as ethylene-oligomerisation and -polymerisation catalysts and compared to Keim's complex, [Ni{Ph2PCH=C(Ph)O}Ph(PPh3)] (1). A rationale for the influence of the double-bond substituents of the P,O-chelate unit on the catalytic properties is proposed, on the basis of X-ray diffraction studies, spectroscopic data and DFT-B3 LYP calculations. Whatever their relative electron-withdrawing strength, the R1 and R2 substituents induce an increase in activity with respect to catalyst 1. For those systems in which the basicity of the oxygen atom is decreased relative to that of the phosphorus atom, the chain-propagation rate increases with respect to that for catalyst 1. Reduction of the basicity of the P relative to that of the O, however, induces higher chain-termination rates.

Catalytic applications of keto-stabilised phosphorus ylides based on a macrocyclic scaffold: calixarenes with one or two pendant Ni(P,O)-subunits as ethylene oligomerisation and polymerisation catalysts.

Four calix[4]arenes containing either one or two ylidic -C(O)CH=PPh3 moieties anchored at p-phenolic carbon atoms were prepared starting from cone-25,27-dipropoxycalix[4]arene (1): 1,3-alternate-5,17-bis(2-triphenylphosphoranylideneacetyl)-25,26,27,28-tetrapropoxycalix[4]arene (12), 1,3-alternate-5-(2-triphenylphosphoranylideneacetyl)-25,26,27,28-tetrapropoxycalix[4]arene (13), cone-5-(2-triphenylphosphoranylideneacetyl)-25,27-dihydroxy-26,28-dipropoxycalix[4]arene (14), cone-5,17-bis(2-triphenylphosphoranylideneacetyl)-25,27-dihydroxy-26,28-dipropoxycalix[4]arene (15). All the ylides were shown to be suitable for the preparation of SHOP-type complexes, i.e. of molecules containing [NiPh{Ph2PCH=C(O)R}(PPh3)] subunits (R = calixarene fragment). The monometallic complexes, namely those obtained from the monophosphorus ylides 13 and 14, proved to be efficient ethylene oligomerisation or polymerisation catalysts. At 80 degrees C, they displayed significantly better activities than the prototype [NiPh{Ph(2)PCH=C(O)Ph}(PPh3)], hence reflecting the beneficial role of the bulky calixarene substituent. The systems derived from the two ylides 12 and 15, both containing two convergent ylidic moieties, resulted in lower activities, the proximity of the two catalytic centres facilitating an intramolecular deactivation pathway during the period of catalyst activation. For the first time, the solid-state structure of a complex containing two "NiPh(P,O)(PPh3)" units as well as that of a SHOP-type complex having two linked phosphorus units were determined.

Bis-phosphites and bis-phosphinites based on distally-functionalised calix[4]arenes: coordination chemistry and use in rhodium-catalysed, low-pressure olefin hydroformylation.

Six calix[4]arenes each bearing two non-cyclic PR2 units attached at distal phenolic oxygen atoms, p-Bu t-calix[4]arene-25,27-(OPR2)2-26,28-(OR')2(R = OPh; R'= Prn, L1; R = OPh; R'= CH2CO2Et, L2; R= OPh; R'= CO2 cholesteryl, L3; R = Ph; R'= Prn, 4; R = Ph; R'= CH2CO2Et, L5; R = Ph; R'= CO2cholesteryl, L6) have been synthesized and their coordinative properties investigated. The diphosphites L1-L3, where the P centres are separated by 12 bonds, readily form chelate complexes provided the complexation reaction is achieved either by using a starting complex that possesses good leaving groups or by operating under high dilution in order to avoid oligomer formation. Thus, the cationic complexes [Rh(COD)L1]BF4 and [Rh(COD)L3]BF4 were both formed in high yield by reacting the appropriate diphosphite with either [Rh(COD)(THF)2]BF4 or [Rh(COD)2]BF4. At high dilution, reaction of L3 with the neutral complex [PdCl2(COD)] afforded the chelate complex [PdCl2L3] in 90% yield. The reaction of one equiv. of L1 with [Rh(acac)(CO)2] resulted in the formation of [Rh(acac)L1] without requiring high dilution conditions. When the latter reaction was carried out with 0.5 equiv. of L1, the bimetallic complex [{Rh(acac)(CO)}2(eta]1-P,eta1-P'-L1)] was formed instead. Reaction at high dilution of with the cyclometallated complex [Pd(o-C6H4CH2NMe2)(THF)2]BF4 gave the expected chelate complex [Pd(o-C6H4CH2NMe2)]BF4. The latter slowly converts in solution to an oligomer in which the ligand behaves as a (eta1-P,eta1-P') bridging ligand, thus leading to a less strained structure. All six ligands, when mixed with [Rh(acac)CO2], effectively catalyse the hydroformylation of octene and styrene. In the hydroformylation of octene, the linear aldehyde selectivities observed with L2 and L3 are significantly higher (linear : branched =ca. 10) than those obtained with the other 4 ligands of this study and also with respect to PPh3. Molecular modelling shows that the lower rim substituents of and form tighter pockets about the metal centre than do the other ligands and so sterically favour the formation of Rh(n-alkyl) intermediates over that of Rh(i-alkyl) ones. In styrene hydroformylation, all ligands result in the formation of unusually high amounts of the linear aldehyde, the b : l ratios being all close to 65 : 35. The highest activities were found when using an L/Rh ratio of 1/1.

Diphosphines with expandable bite angles: highly active ethylene dimerisation catalysts based on upper rim, distally diphosphinated calix[4]arenes.

The binding properties of two large diphosphines, cone-5,17-dibromo-11,23-bis(diphenylphosphino)-25,26,27,28-tetrapropoxycalix[4]arene (1) and cone-5,17-bis(diphenylphosphino)-25,26,27,28-tetrapropoxycalix[4]arene (2) toward Ni(II) centres have been investigated. Whatever the starting complex, NiBr2 or [NiCp]BF4, quantitative formation of a chelate complex was observed, illustrating the preorganisation of the ligands. An X-ray structure determination was carried out for [NiCp1]BF4 which revealed that the nickel atom is positioned to one side of the calixarene axis, the PNiP plane being roughly parallel to the calixarene reference plane. The molecule has C(1) symmetry in the solid state, a feature which is also observed in solution at low temperature. As shown by variable-temperature 1H and 31P NMR studies, the complex undergoes two distinct motions: 1) a fan-like swinging of the coordination plane which displaces the metal from one side of the calixarene axis to the other, a motion during which the PNiP angle is likely to undergo a significant enlargement; 2) a rapid oscillation of each PPh2 unit about the corresponding Ni--P bond. In the latter dynamics the two endo-oriented PPh rings alternately occupy the calixarene entry. The two flexible ligands were assessed in ethylene oligomerisation. Activation with methylaluminoxane of the paramagnetic complexes [NiBr2.(1 or 2)] afforded highly active ethylene dimerisation catalysts, with turnover frequencies up to 10(6) (mol C2H4) (mol Ni)(-1) h(-1). The selective formation of 1-butene can be rationally controlled by using low catalyst concentrations.