In Situ Imaging of Two-Dimensional Crystal Growth Using a Heat-Resistant Optical Microscope.

Revealing low-dimensional material growth dynamics is critical for crystal growth engineering. However, in a practical high-temperature growth system, the crystal growth process is a black box because of the lack of heat-resistant imaging tools. Here, we develop a heat-resistant optical microscope and embed it in a chemical vapor deposition (CVD) system to investigate two-dimensional (2D) crystal growth dynamics. This in situ optical imaging CVD system can tolerate temperatures of ≤900 °C with a spatial resolution of ∼1 µm. The growth of monolayer MoS2 crystals was studied as a model for 2D crystal growth. The nucleation and growth process have been imaged. Model analysis and simulation have revealed the growth rate, diffusion coefficient, and spatial distribution of the precursor. More importantly, a new vertex-kink-ledge model has been suggested for monolayer crystal growth. This work provides a new technique for in situ microscopic imaging at high temperatures and fundamental insight into 2D crystal growth.

Mast cell stabilizer, an anti-allergic drug, reduces ventricular arrhythmia risk via modulation of neuroimmune interaction.

Mast cells (MCs) are important intermediates between the nervous and immune systems. The cardiac autonomic nervous system (CANS) crucially modulates cardiac electrophysiology and arrhythmogenesis, but whether and how MC-CANS neuroimmune interaction influences arrhythmia remain unclear. Our clinical data showed a close relationship between serum levels of MC markers and CANS activity, and then we use mast cell stabilizers (MCSs) to alter this MC-CANS communication. MCSs, which are well-known anti-allergic agents, could reduce the risk of ventricular arrhythmia (VA) after myocardial infarction (MI). RNA-sequencing (RNA-seq) analysis to investigate the underlying mechanism by which MCSs could affect the left stellate ganglion (LSG), a key therapeutic target for modulating CANS, showed that the IL-6 and γ-aminobutyric acid (GABA)-ergic system may be involved in this process. Our findings demonstrated that MCSs reduce VA risk along with revealing the potential underlying antiarrhythmic mechanisms.

Designing artificial two-dimensional landscapes via atomic-layer substitution.

Technology advancements in history have often been propelled by material innovations. In recent years, two-dimensional (2D) materials have attracted substantial interest as an ideal platform to construct atomic-level material architectures. In this work, we design a reaction pathway steered in a very different energy landscape, in contrast to typical thermal chemical vapor deposition method in high temperature, to enable room-temperature atomic-layer substitution (RT-ALS). First-principle calculations elucidate how the RT-ALS process is overall exothermic in energy and only has a small reaction barrier, facilitating the reaction to occur at room temperature. As a result, a variety of Janus monolayer transition metal dichalcogenides with vertical dipole could be universally realized. In particular, the RT-ALS strategy can be combined with lithography and flip-transfer to enable programmable in-plane multiheterostructures with different out-of-plane crystal symmetry and electric polarization. Various characterizations have confirmed the fidelity of the precise single atomic layer conversion. Our approach for designing an artificial 2D landscape at selective locations of a single layer of atoms can lead to unique electronic, photonic, and mechanical properties previously not found in nature. This opens a new paradigm for future material design, enabling structures and properties for unexplored territories.

Good Personality and Subjective Well-Being During the COVID-19 Pandemic: A Three-Wave Longitudinal Study in Chinese Contexts.

Numerous studies have emphasized the importance of examining psychological distress during the COVID-19 pandemic. It is important to identify the factors that affect the influence of COVID-19 on people's mental health. The present research was a three-wave longitudinal study (N = 1495) examining the concurrent and prospective relations of good personality with subjective well-being during the COVID-19 pandemic. Results showed that good personality positively predicted the subsequent well-being after controlling for the respective autoregressive effects and Big Five personality traits. Specifically, individuals who scored higher on measures of good personality tended to maintain higher well-being in the face of COVID-19. However, subjective well-being could positively predict subsequent personality only at the first time point. In addition, the prospective effect of good personality on subjective well-being was greater than the reverse effect. These findings support the opinion that as a positive value orientation in personality, good personality has a significant positive impact on the response to the pandemic situation.

Melatonin improves cardiac remodeling and brain-heart sympathetic hyperactivation aggravated by light disruption after myocardial infarction.

Light in the external environment might affect cardiovascular function. The light disruption seems to be related to changes in cardiovascular physiological functions, and disturbing light may be a risk factor for cardiovascular diseases. Prior studies have found that light disruption after myocardial infarction (MI) exacerbates cardiac remodeling, and the brain-heart sympathetic nervous system may be one of the key mechanisms. However, how to improve light-disrupted cardiac remodeling remains unclear. Melatonin is an indoleamine secreted by the pineal gland and controlled by endogenous circadian oscillators within the suprachiasmatic nucleus, which is closely associated with light/dark cycle. This study aimed to explore whether melatonin could improve light-disrupted cardiac remodeling and modulate the brain-heart sympathetic nervous system. Our study revealed that light disruption reduced serum melatonin levels, aggravated cardiac sympathetic remodeling, caused overactivation of the brain-heart sympathetic nervous system, exacerbated cardiac dysfunction, and increased cardiac fibrosis after MI, while melatonin treatment improved light disruption-exacerbated cardiac remodeling and brain-heart sympathetic hyperactivation after MI. Furthermore, RNA-Seq results revealed the significant changes at the cardiac transcription level. In conclusion, melatonin may be a potential therapy for light-disrupted cardiac remodeling.

Rapid and Large-Scale Quality Assessment of Two-Dimensional MoS2 Using Sulfur Particles with Optical Visualization.

The efficient nondestructive assessment of quality and homogeneity for two-dimensional (2D) MoS2 is critically important to advance their practical applications. Here, we presented a rapid and large-area assessment method for visually evaluating the quality and uniformity of chemical vapor deposition (CVD)-grown MoS2 monolayers simply with conventional optical microscopes. This was achieved through one-pot adsorbing abundant sulfur particles selectively onto as-grown poorer-quality MoS2 monolayers in a CVD system without any additional treatment. We further revealed that this favorable adsorption of sulfur particles on MoS2 originated from their intrinsic higher-density sulfur vacancies. Based on unadsorbed MoS2 monolayers, superior performance field effect transistors with a mobility of ∼49 cm2 V-1 s-1 were constructed. Importantly, the assessment approach was noninvasive due to the all-vapor-phase and moderate adsorption-desorption process. Our work offers a new route for the performance and yield optimization of devices by quality assessment of 2D semiconductors prior to device fabrication.

Activating a Two-Dimensional PtSe2 Basal Plane for the Hydrogen Evolution Reaction through the Simultaneous Generation of Atomic Vacancies and Pt Clusters.

Two-dimensional (2D) PtSe2 has emerged as a promising ultrathin electrocatalyst due to its excellent catalytic activity and conductivity. However, the PtSe2 basal plane is inert for the hydrogen evolution reaction (HER), which greatly limits its electrocatalytic performance. Here, in light of theoretical calculations, we designed a facile approach for activating the 2D PtSe2 basal plane for the HER by simultaneously introducing atomic vacancies of Se, Pt, and Pt clusters through a mild Ar plasma treatment. We tracked changes in the structures and catalytic performance of PtSe2 by combining microscopic imaging, spectroscopic mapping, and electrochemical measurements in microcells. The highest performance of the activated PtSe2 basal plane that we obtained was superior to those of other 2D transition metal dichalcogenide-based electrocatalysts measured in microcells in terms of the overpotential, the Tafel slope, and the exchange current density. This study demonstrates the great potential of activated 2D PtSe2 as an ultrathin catalyst for the HER and provides new insights on the rational design of 2D electrocatalysts.

Phase Transition Photodetection in Charge Density Wave Tantalum Disulfide.

The charge density wave (CDW) phase is a macroscopic quantum state with periodic charge density modulation accompanied by periodic lattice distortion in low-dimensional metals. External fields, such as an electric field and optical excitation, can trigger the transitions among different CDW states, leaving an under-explored mechanism and attracting great interest toward optoelectronic applications. Here, we explore a photoinduced phase transition in 1T-TaS2 under an electrical field. By analyzing the phase transition probability, we obtained a linear dependence of the phase transition barrier on the electric field and laser energy density. Additionally, the threshold laser energy for the phase transition decreases linearly with an increasing applied electrical field. Finally, picojoule photodetection was realized in the visible and near-infrared ranges near the CDW transition edge. Our work will promote the understanding of the CDW phase transition mechanism as well as open pathways for optoelectronic applications.

Development and validation of the good and evil character traits (GECT) scale.

The present study describes the development and validation of the good and evil character traits (GECT) scale. A set of 3,614 good and evil moral character descriptors (i.e., moral and immoral character traits) was selected from a dictionary of contemporary Chinese language and daily life expressions and ultimately condensed into 55 items. Then, exploratory factor analysis (EFA) and parallel analysis (PA) were conducted to explore the structure and final items of the GECT with sample 1 (n = 350), resulting in 21 good items and 32 evil items. After that, in confirmatory factor analysis (CFA) with sample 2 (n = 350), the resulting factor structure was confirmed for the 53-item scale (Study 1). Additionally, evidence of validity based on correlations with Honesty-Humility and Dirty Dozen was demonstrated (Study 2). The implications of our findings for the assessment of good and evil characters and further theoretical exploration are discussed.

1D/2D Heterostructures as Ultrathin Catalysts for Hydrogen Evolution Reaction.

2D MoS2 has emerged as a promising alternative to Pt-based catalysts for hydrogen evolution reaction (HER) due to its low cost and earth abundance. However, insufficient active sites of basal plane and poor conductivity become the foremost factors restricting the catalytic performance of MoS2 . Here, a facile strategy is presented to enhance the HER performance of MoS2 by converting its 2D structure into 1D/2D heterostructures of Mo6 Te6 /MoS2(1- x ) Te2 x by the in situ tellurization. As-prepared 1D/2D heterostructures exhibit excellent HER performance with the Tafel slope of ≈56 mV dec-1 (only one-third of that for pristine MoS2 ). The enhanced HER catalytic activity is attributed to more Te/S vacancies introduced by tellurization, which serve as the active sites as suggested by theoretical calculations. Besides, the formation of highly conductive well-aligned quasi-1D Mo6 Te6 nanobelts facilitate charge transport in HER. Previous work provides a facile approach to construct mixed dimensional materials, and opens up a new avenue to the properties modulation of 2D transition metal chalcogenides.

Elastic Properties and Fracture Behaviors of Biaxially Deformed, Polymorphic MoTe2.

Biaxial deformation of suspended membranes widely exists and is used in nanoindentation to probe elastic properties of structurally isotropic two-dimensional (2D) materials. However, the elastic properties and, in particular, the fracture behaviors of anisotropic 2D materials remain largely unclarified in the case of biaxial deformation. MoTe2 is a polymorphic 2D material with both isotropic (2H) and anisotropic (1T' and Td) phases and, therefore, an ideal system of single-stoichiometric materials with which to study these critical issues. Here, we report the elastic properties and fracture behaviors of biaxially deformed, polymorphic MoTe2 by combining temperature-variant nanoindentation and first-principles calculations. It is found that due to similar atomic bonding, the effective moduli of the three phases deviate by less than 15%. However, the breaking strengths of distorted 1T' and Td phases are only half the value of 2H phase due to their uneven distribution of bonding strengths. Fractures of both isotropic 2H and anisotropic 1T' phases obey the theorem of minimum energy, forming triangular and linear fracture patterns, respectively, along the orientations parallel to Mo-Mo zigzag chains. Our findings not only provide a reference database for the elastic behaviors of versatile MoTe2 phases but also illuminate a general strategy for the mechanical investigation of any isotropic and anisotropic 2D materials.

Unveiling the Interfacial Effects for Enhanced Hydrogen Evolution Reaction on MoS2 /WTe2 Hybrid Structures.

Using the MoS2 -WTe2 heterostructure as a model system combined with electrochemical microreactors and density function theory calculations, it is shown that heterostructured contacts enhance the hydrogen evolution reaction (HER) activity of monolayer MoS2 . Two possible mechanisms are suggested to explain this enhancement: efficient charge injection through large-area heterojunctions between MoS2 and WTe2 and effective screening of mirror charges due to the semimetallic nature of WTe2 . The dielectric screening effect is proven minor, probed by measuring the HER activity of monolayer MoS2 on various support substrates with dielectric constants ranging from 4 to 300. Thus, the enhanced HER is attributed to the increased charge injection into MoS2 through large-area heterojunctions. Based on this understanding, a MoS2 /WTe2 hybrid catalyst is fabricated with an HER overpotential of -140 mV at 10 mA cm-2 , a Tafel slope of 40 mV dec-1 , and long stability. These results demonstrate the importance of interfacial design in transition metal dichalcogenide HER catalysts. The microreactor platform presents an unambiguous approach to probe interfacial effects in various electrocatalytic reactions.

Phase-selective synthesis of 1T' MoS2 monolayers and heterophase bilayers.

Two-dimensional (2D) MoS2, which has great potential for optoelectronic and other applications, is thermodynamically stable and hence easily synthesized in its semiconducting 2H phase. In contrast, growth of its metastable 1T and 1T' phases is hampered by their higher formation energy. Here we use theoretical calculations to design a potassium (K)-assisted chemical vapour deposition method for the phase-selective growth of 1T' MoS2 monolayers and 1T'/2H heterophase bilayers. This is realized by tuning the concentration of K in the growth products to invert the stability of the 1T' and 2H phases. The synthesis of 1T' MoS2 monolayers with high phase purity allows us to characterize their intrinsic optical and electrical properties, revealing a characteristic in-plane anisotropy. This phase-controlled bottom-up synthesis offers a simple and efficient way of manipulating the relevant device structures, and provides a general approach for producing other metastable-phase 2D materials with unique properties.

Electrical Stressing Induced Monolayer Vacancy Island Growth on TiSe2.

To ensure practical applications of atomically thin transition metal dichalcogenides, it is essential to characterize their structural stability under external stimuli such as electric fields and currents. Using vacancy monolayer islands on TiSe2 surfaces as a model system, we have observed nonlinear area evolution and growth from triangular to hexagonal driven by scanning tunneling microscopy (STM) subjected electrical stressing. The observed growth dynamics represent a 2D departure from the linear area growth law expected for bulk vacancy clustering. Our simulations of monolayer island evolution using phase-field modeling and first-principles calculations are in good agreement with our experimental observations, and point toward preferential edge atom dissociation under STM scanning driving the observed nonlinear area growth. We further quantified a parabolic growth rate dependence with respect to the tunneling current magnitude. The results could be potentially important for device reliability in systems containing ultrathin transition metal dichalcogenides and related 2D materials subject to electrical stressing.

Layer-Dependent Chemically Induced Phase Transition of Two-Dimensional MoS2.

Two-dimensional (2D) transition metal dichalcogenides (TMDCs) with layered structures provide a unique platform for exploring the effect of number of layers on their fundamental properties. However, the thickness scaling effect on the chemical properties of these materials remains unexplored. Here, we explored the chemically induced phase transition of 2D molybdenum disulfide (MoS2) from both experimental and theoretical aspects and observed that the critical electron injection concentration and the duration required for the phase transition of 2D MoS2 increased with decreasing number of layers. We further revealed that the observed dependence originated from the layer-dependent density of states of 2H-MoS2, which results in decreasing phase stability for 2H-MoS2 with increasing number of layers upon electron doping. Also, the much larger energy barrier for the phase transition of monolayer MoS2 induces the longer reaction time required for monolayer MoS2 as compared to multilayer MoS2. The layer-dependent phase transition of 2D MoS2 allows for the chemical construction of semiconducting-metallic heterophase junctions and, subsequently, the fabrications of rectifying diodes and all 2D field effect transistors and thus opens a new avenue for building ultrathin electronic devices. In addition, these new findings elucidate how electronic structures affect the chemical properties of 2D TMDCs and, therefore, shed new light on the controllable chemical modulations of these emerging materials.

Unveiling the Layer-Dependent Catalytic Activity of PtSe2 Atomic Crystals for the Hydrogen Evolution Reaction.

Two-dimensional (2D) PtSe2 shows the most prominent layer-dependent electrical properties among various 2D materials and high catalytic activity for hydrogen evolution reaction (HER), and therefore, it is an ideal material for exploring the structure-activity correlations in 2D systems. Here, starting with the synthesis of single-crystalline 2D PtSe2 with a controlled number of layers and probing the HER catalytic activity of individual flakes in micro electrochemical cells, we investigated the layer-dependent HER catalytic activity of 2D PtSe2 from both theoretical and experimental perspectives. We clearly demonstrated how the number of layers affects the number of active sites, the electronic structures, and electrical properties of 2D PtSe2 flakes and thus alters their catalytic performance for HER. Our results also highlight the importance of efficient electron transfer in achieving optimum activity for ultrathin electrocatalysts. Our studies greatly enrich our understanding of the structure-activity correlations for 2D catalysts and provide new insight for the design and synthesis of ultrathin catalysts with high activity.

Donor Engineering for NIR-II Molecular Fluorophores with Enhanced Fluorescent Performance.

Organic fluorophores have been widely used for biological imaging in the visible and the first near-infrared windows. However, their application in the second near-infrared window (NIR-II, 1000-1700 nm) is still limited mainly due to low fluorescence quantum yields (QYs). Here, we explore molecular engineering on the donor unit to develop high performance NIR-II fluorophores. The fluorophores are constructed by a shielding unit-donor(s)-acceptor-donor(s)-shielding unit structure. Thiophene is introduced as the second donor connected to the shielding unit, which can increase the conjugation length and red-shift the fluorescence emission. Alkyl thiophene is employed as the first donor connected to the acceptor unit. The bulky and hydrophobic alkyl thiophene donor affords larger distortion of the conjugated backbone and fewer interactions with water molecules compared to other donor units studied before. The molecular fluorophore IR-FTAP with octyl thiophene as the first donor and thiophene as the second donor exhibits fluorescence emission peaked at 1048 nm with a QY of 5.3% in aqueous solutions, one of the highest for molecular NIR-II fluorophore reported so far. Superior temporal and spatial resolutions have been demonstrated with IR-FTAP fluorophore for NIR-II imaging of the blood vessels of a mouse hindlimb.

Force and light tuning vertical tunneling current in the atomic layered MoS2.

In this work, the vertical electrical transport behavior of bilayer MoS2 under the coupling of force and light was explored by the use of conductive atomic force microscopy. We found that the current-voltage behavior across the tip-MoS2-Pt junction is a tunneling current that can be well fitted by a Simmons approximation. The transport behavior is direct tunneling at low bias and Fowler-Nordheim tunneling at high bias, and the transition voltage and tunnel barrier height are extracted. The effect of force and light on the effective band gap of the junction is investigated. Furthermore, the source-drain current drops surprisingly when we continually increase the force, and the dropping point is altered by the provided light. This mechanism is responsible for the tuning of tunneling barrier height and width by force and light. These results provide a new way to design devices that take advantage of ultrathin two-dimensional materials. Ultrashort channel length electronic components that possess tunneling current are important for establishing high-efficiency electronic and optoelectronic systems.

Suppression of the Charge Density Wave State in Two-Dimensional 1T-TiSe2 by Atmospheric Oxidation.

Two-dimensional (2D) metallic transition-metal dichalcogenides (TMDCs), such as 1T-TiSe2 , have recently emerged as unique platforms for exploring their exciting properties of superconductivity and the charge density wave (CDW). 2D 1T-TiSe2 undergoes rapid oxidation under ambient conditions, significantly affecting its CDW phase-transition behavior. We comprehensively investigate the oxidation process of 2D TiSe2 by tracking the evolution of the chemical composition and atomic structure with various microscopic and spectroscopic techniques and reveal its unique selenium-assisting oxidation mechanism. Our findings facilitate a better understanding of the chemistry of ultrathin TMDCs crystals, introduce an effective method to passivate their surfaces with capping layers, and thus open a way to further explore the functionality of these materials toward devices.

Two-Dimensional Semiconductors Grown by Chemical Vapor Transport.

Developing controlled approaches for synthesizing high-quality two-dimensional (2D) semiconductors is essential for their practical applications in novel electronics. The application of chemical vapor transport (CVT), an old single-crystal growth technique, has been extended from growing 3D crystals to synthesizing 2D atomic layers by tuning the growth kinetics. Both single crystalline individual flakes and continuous films of 1 L MoS2 were successfully obtained with CVT approach at low growth temperatures of 300-600 °C. The obtained 1 L MoS2 exhibits high crystallinity and comparable mobility to mechanically exfoliated samples, as confirmed by both atomic resolution microscopic imaging and electrical transport measurements. Besides MoS2 , this method was also used in the growth of 2D WS2 , MoSe2 , Mox W1-x S2 alloys, and ReS2 , thus opening up a new way for the controlled synthesis of various 2D semiconductors.