LiF-Rich Solid Electrolyte Interphase Formation by Establishing Sacrificial Layer on the Separator.

The formation of a stable solid electrolyte interphase (SEI) layer is crucial for enhancing the safety and lifespan of Li metal batteries. Fundamentally, a homogeneous Li+ behavior by controlling the chemical reaction at the anode/electrolyte interface is the key to establishing a stable SEI layer. However, due to the highly reactive nature of Li metal anodes (LMAs), controlling the movement of Li+ at the anode/electrolyte interface remains challenging. Here, an advanced approach is proposed for coating a sacrificial layer called fluorinated self-assembled monolayer (FSL) on a boehmite-coated polyethylene (BPE) separator to form a stable SEI layer. By leveraging the strong affinity between the fluorine functional group and Li+, the rapid formation of a LiF-rich SEI layer in the cell production and early cycling stage is facilitated. This initial stable SEI formation promotes the subsequent homogeneous Li+ flux, thereby improving the LMA stability and yielding an enhanced battery lifespan. Further, the mechanism behind the stable SEI layer generation by controlling the Li+ dynamics through the FSL-treated BPE separator is comprehensively verified. Overall, this research offers significant contributions to the energy storage field by addressing challenges associated with LMAs, thus highlighting the importance of interfacial control in achieving a stable SEI layer.

Verification of Carrier Concentration-Dependent Behavior in Water-Infiltration-Induced Electricity Generation by Ionovoltaic Effect.

Water-infiltration-induced power generation has the renewable characteristic of generating electrical energy from ambient water. Importantly, it is found that the carrier concentration in semiconductor constituting the energy generator seriously affect the electricity generation. Nevertheless, few studies are conducted on the influence of semiconductor carrier concentration, a crucial factor on electricity generation. Due to this, understanding of the energy harvesting mechanism is still insufficient. Herein, the semiconductor carrier concentration-dependent behavior in water-infiltration-induced electricity generation and the energy harvesting mechanism by ionovoltaic effect are comprehensively verified. A clue to enhance the electric power generation efficiency is also proposed. When 20 µL of water (NaCl, 0.1 m) infiltrates into a porous CuO nanowires film (PCNF), electric power of ≈0.5 V and ≈1 µA are produced for 25 min. Moreover, the PCNF shows good practicability by generating electricity using various ambient water, turning on LEDs, and being fabricated as a curved one.

Efficient Ionovoltaic Energy Harvesting via Water-Induced p-n Junction in Reduced Graphene Oxide.

Water motion-induced energy harvesting has emerged as a prominent means of facilitating renewable electricity from the interaction between nanostructured materials and water over the past decade. Despite the growing interest, comprehension of the intricate solid-liquid interfacial phenomena related to solid state physics remains elusive and serves as a hindrance to enhancing energy harvesting efficiency up to the practical level. Herein, the study introduces the energy harvester by utilizing inversion on the majority charge carrier in graphene materials upon interaction with water molecules. Specifically, various metal electrode configurations are employed on reduced graphene oxide (rGO) to unravel its distinctive charge carriers that experience the inversion in semiconductor type upon water contact, and exploit this characteristic to leverage the efficacy of generated electricity. Through the strategic arrangement of the metal electrodes on rGO membrane, the open-circuit voltage (Voc) and short-circuit current (Isc) have exhibited a remarkable augmentation, reaching 1.05 V and 31.6 µA, respectively. The demonstration of effectively tailoring carrier dynamics via electrode configuration expands the practicality by achieving high power density and elucidating how the water-induced carrier density modulation occurs in 2D nanomaterials.

Lateral Electronic Junction of a Single Ultrathin Silicon Induced by Interfacial Dipole of Self-Assembled Monolayer.

Interface engineering is pivotal for enhancing the performance and stability of devices with layered structures, including solar cells, electronic devices, and electrochemical systems. Incorporating the interfacial dipole between the bulk layers effectively modulates the energy level difference at the interface and does not significantly influence adjacent layers overall. However, interfaces can drastically affect adjoining layers in ultrathin devices, which are essential for next-generation electronics with high integrity, excellent performance, and low power consumption. In particular, the interfacial effect is pronounced in ultrathin semiconductors, which have a weak electric field screening effect. Herein, the substantial interfacial impact on the ultrathin silicon is shown, the p- to n-type inversion of the semiconductor solely through the deposition of a self-assembled monolayer (SAM) without external bias. The effects of SAMs with different interfacial dipoles are investigated by using Hall measurement and surface analytic techniques, such as UPS, XPS, and KPFM. Furthermore, the lateral electronic junction of the ultrathin silicon is engineered by the regioselective deposition of SAMs with opposite dipoles, and the device exhibits rectification behavior. When the interfacial dipole of SAM is manipulated, the rectification ratio changes sensitively, and thus the fabricated diode shows potential to be developed as a sensing platform.

Ionic Diffusion-Driven Ionovoltaic Transducer for Probing Ion-Molecular Interactions at Solid-Liquid Interface.

Ion-solid surface interactions are one of the fundamental principles in liquid-interfacing devices ranging from various electrochemical systems to electrolyte-driven energy conversion devices. The interplays between these two phases, especially containing charge carriers in the solid layer, work as a pivotal role in the operation of these devices, but corresponding details of those effects remain as unrevealed issues in academic fields. Herein, an ion-charge carrier interaction at an electrolyte-semiconductor interface is interrogated with an ion-dynamics-induced (ionovoltaic) energy transducer, controlled by interfacial self-assembled molecules. An electricity generating mechanism from interfacial ionic diffusion is elucidated in terms of the ion-charge carrier interaction, originated from a dipole potential effect of the self-assembled molecular layer (SAM). In addition, this effect is found to be modulated via chemical functionalization of the interfacial molecular layer and transition metal ion complexation therein. With the aiding of surface analytic techniques and a liquid-interfacing Hall measurement, electrical behaviors of the device depending on the magnitude of the ion-ligand complexation are interrogated, thereby demonstrating the ion-charge carrier interplays spanning at electrolyte-SAM-semiconductor interface. Hence, this system can be applied to study molecular interactions, including chemical and physical influences, occurring at the solid-liquid interfacial region.

Electron Density-Change in Semiconductor by Ion-Adsorption at Solid-Liquid Interface.

The change in electrical properties of electrodes by adsorption or desorption at interfaces is a well-known phenomenon required for signal production in electrically transduced sensing technologies. Furthermore, in terms of electrolyte-insulator-semiconductor (EIS) structure, several studies of energy conversion techniques focused on ion-adsorption at the solid-liquid interface have suggested that the electric signal is generated by ionovoltaic phenomena. However, finding substantial clues for the ion-adsorption phenomena in the EIS structure is still a difficult task because direct evidence for carrier accumulation in semiconductors by Coulomb interactions is insufficient. Here, a sophisticated Hall measurement system is demonstrated to quantitatively analyze accumulated electron density-change inside the semiconductor depending on the ion-adsorption at the solid-liquid interface. Also, an enhanced EIS-structured device is designed in an aqueous-soaked system that works with the ionovoltaic principle to monitor the ion-dynamics in liquid electrolyte media, interestingly confirming ion-concentration dependence and ion-specificity by generated peak voltages. This newly introduced peculiar method contributes to an in-depth understanding of the ionovoltaic phenomena in terms of carrier actions in the semiconductors and ionic behaviors in the aqueous-bulk phases, providing informative analysis about interfacial adsorptions that can expand the scope of ion-sensing platforms.

Probing an Interfacial Ionic Pairing-Induced Molecular Dipole Effect in Ionovoltaic System.

A surficial molecular dipole effect depending on ion-molecular interactions has been crucial issues regarding to an interfacial potential, which can modulate solid electronic and electrochemical systems. Their properties near the interfacial region can be dictated by specific interactions between surface and adsorbates, but understandings of the corresponding details remain at interesting issues. Here, intuitive observations of an ionic pair formation-induced interfacial potential shifts are presented with an ionovoltaic system, and corresponding output signal variations are analyzed in terms of the surficial dipole changes on self-assembled monolayer. With aiding of photoelectron spectroscopies and density function theory simulation, the ionic pair formation-induced potential shifts are revealed to strongly rely on a paired molecular structure and a binding affinity of the paired ionic moieties. Chemical contributions to the binding event are interrogated in terms of polarizability in each ionic group and consistent with chaotropic/kosmotropic character of the ionic groups. Based on these findings, the ionovoltaic output changes are theoretically correlated with an adsorption isotherm reflecting the molecular dipole effect, thereby demonstrating as an efficient interfacial molecular probing method under electrolyte interfacing conditions.

Production of Rare Ginsenosides Rg3 and Rh2 by Endophytic Bacteria from Panax ginseng.

The ginsenosides Rh2 and Rg3 induce tumor cell apoptosis, inhibit tumor cell proliferation, and restrain tumor invasion and metastasis. Despite Rh2 and Rg3 having versatile pharmacological activities, contents of them in natural ginseng are extremely low. To produce ginsenosides Rh2 and Rg3, the saponin-producing capacity of endophytic bacteria isolated from Panax ginseng was investigated. In this work, 81 endophytic bacteria isolates were taken from ginseng roots by tissue separation methods. Among them, strain PDA-2 showed the highest capacity to produce the rare ginsenosides; the concentrations of rare ginsenosides Rg3 and Rh2 reached 62.20 and 18.60 mg/L, respectively. On the basis of phylogenetic analysis, it was found that strain PDA-2 belongs to the genus Agrobacterium and was very close to Agrobacterium rhizogenes.

A Surface-Functionalized Ionovoltaic Device for Probing Ion-Specific Adsorption at the Solid-Liquid Interface.

Aqueous ion-solid interfacial interactions at an electric double layer (EDL) are studied in various research fields. However, details of the interactions at the EDL are still not fully understood due to complexity induced from the specific conditions of the solid and liquid parts. Several technical tools for ion-solid interfacial probing are experimentally and practically proposed, but they still show limitations in applicability due to the complicated measurements. Recently, an energy conversion device based on ion dynamics (called ionovoltaic device) was also introduced as another monitoring tool for the EDL, showing applicability as a novel probing method for interfacial interactions. Herein, a monitoring technique for specific ion adsorption (Cu2+ and Pb2+ in the range of 5 × 10-6 -1000 × 10-6 m) in the solid-liquid interface based on the ionovoltaic device is newly demonstrated. The specific ion adsorption and the corresponding interfacial potentials profiles are also investigated to elucidate a working mechanism of the device. The results give the insight of molecular-level ion adsorption through macroscopic water-motion-induced electricity generation. The simple and cost-effective detection of the device provides an innovative route for monitoring specific adsorption and expandability as a monitoring tool for various solid-liquid interfacial phenomena that are unrevealed.