Role of surface electromagnetic waves in metamaterial absorbers.

Metamaterial absorbers have been demonstrated across much of the electromagnetic spectrum and exhibit both broad and narrow-band absorption for normally incident radiation. Absorption diminishes for increasing angles of incidence and transverse electric polarization falls off much more rapidly than transverse magnetic. We unambiguously demonstrate that broad-angle TM behavior cannot be associated with periodicity, but rather is due to coupling with a surface electromagnetic mode that is both supported by, and well described via the effective optical constants of the metamaterial where we achieve a resonant wavelength that is 19.1 times larger than the unit cell. Experimental results are supported by simulations and we highlight the potential to modify the angular response of absorbers by tailoring the surface wave.

High responsivity, low dark current, heterogeneously integrated thin film Si photodetectors on rigid and flexible substrates.

We report thin film single crystal silicon photodetectors (PDs), composed of 13- 25 µm thick silicon, heterogeneously bonded to transparent Pyrex® and flexible Kapton® substrates. The measured responsivity and dark current density of the PDs on pyrex is 0.19 A/W - 0.34 A/W (λ = 470 nm - 600 nm) and 0.63 nA/cm(2), respectively, at ~0V bias. The measured responsivity and dark current density of the flexible PDs is 0.16 A/W - 0.26 A/W (λ = 470 nm - 600 nm) and 0.42 nA/cm(2), respectively, at a ~0V bias. The resulting responsivity-to-dark current density ratios for the reported rigid and flexible PDs are 0.3-0.54 cm(2)/nW and 0.38-0.62 cm(2)/nW, respectively. These are the highest reported responsivity-to-dark current density ratios for heterogeneously bonded thin film single crystal Si PDs, to the best of our knowledge. These PDs are customized for applications in biomedical imaging and integrated biochemical sensing.

Infrared metamaterial phase holograms.

As a result of advances in nanotechnology and the burgeoning capabilities for fabricating materials with controlled nanoscale geometries, the traditional notion of what constitutes an optical device continues to evolve. The fusion of maturing low-cost lithographic techniques with newer optical design strategies has enabled the introduction of artificially structured metamaterials in place of conventional materials for improving optical components as well as realizing new optical functionality. Here we demonstrate multilayer, lithographically patterned, subwavelength, metal elements, whose distribution forms a computer-generated phase hologram in the infrared region (10.6 µm). Metal inclusions exhibit extremely large scattering and can be implemented in metamaterials that exhibit a wide range of effective medium response, including anomalously large or negative refractive index; optical magnetism; and controlled anisotropy. This large palette of metamaterial responses can be leveraged to achieve greater control over the propagation of light, leading to more compact, efficient and versatile optical components.

Arbitrary birefringent metamaterials for holographic optics at λ = 1.55 µm.

This paper presents an optical element capable of multiplexing two diffraction patterns for two orthogonal linear polarizations, based on the use of non-resonant metamaterial cross elements. The metamaterial cross elements provide unique building blocks for engineering arbitrary birefringence. As a proof-of-concept demonstration, we present the design and experimental characterization of a polarization multiplexed blazed diffraction grating and a polarization multiplexed computer-generated hologram, for the telecommunication wavelength of λ = 1.55 µm. A quantitative study of the polarization multiplexed grating reveals that this approach yields a very large polarization contrast ratio. The results show that metamaterials can form the basis for a versatile and compact platform useful in the design of multi-functional photonic devices.

Planar, flattened Luneburg lens at infrared wavelengths.

Employing artificially structured metamaterials provides a means of circumventing the limits of conventional optical materials. Here, we use transformation optics (TO) combined with nanolithography to produce a planar Luneburg lens with a flat focal surface that operates at telecommunication wavelengths. Whereas previous infrared TO devices have been transformations of free-space, here we implement a transformation of an existing optical element to create a new device with the same optical characteristics but a user-defined geometry.

Design and fabrication of a metamaterial gradient index diffraction grating at infrared wavelengths.

We demonstrate the design, fabrication and characterization of an artificially structured, gradient index metamaterial with a linear index variation of Δn ~ 3.0. The linear gradient profile is repeated periodically to form the equivalent of a blazed grating, with the gradient occurring across a spatial distance of 61 µm. The grating, which operates at a wavelength of 10.6 µm, is composed of non-resonant, progressively modified "I-beam" metamaterial elements and approximates a linear phase shift gradient using 61 distinguishable phase levels. The grating structure consists of four layers of lithographically patterned metallic I-beam elements separated by dielectric layers of SiO(2). The index gradient is confirmed by comparing the measured magnitudes of the -1, 0 and +1 diffracted orders to those obtained from full wave simulations incorporating all material properties of the metals and dielectrics of the structures. The large index gradient has the potential to enable compact infrared diffractive and gradient index optics, as well as more exotic transformation optical media.

Plasmonic multi-mode interference couplers.

Plasmonic multi-mode interference (MMI) couplers have been investigated both numerically and experimentally at the telecommunication wavelength of 1.55 mum. In this study, the couplers are implemented using thin Au stripes that support long-range surface plasmons. We first detail the operation principle of these devices with numerical simulations and show that useful effects can be obtained despite the high material losses inherent to metallic structures. A series of MMI couplers is subsequently fabricated and experimentally characterized, showing a quantitative agreement with our numerical predictions. We conclude by discussing some of the possible applications for these structures.

Methods of extraction of optical properties from diffuse reflectance measurements of ex-vivo human colon tissue using thin film silicon photodetector arrays.

Spatially resolved diffuse reflectance spectroscopy (SRDRS) is a promising technique for characterization of colon tissue. Herein, two methods for extracting the reduced scattering and absorption coefficients ( µ s ' ( λ ) and µ a ( λ ) ) from SRDRS data using lookup tables of simulated diffuse reflectance are reported. Experimental measurements of liquid tissue phantoms performed with a custom multi-pixel silicon SRDRS sensor spanning the 450 - 750 nm wavelength range were used to evaluate the extraction methods, demonstrating that the combined use of spatial and spectral data reduces extraction error compared to use of spectral data alone. Additionally, SRDRS measurements of normal and tumor ex-vivo human colon tissue are presented along with µ s ' ( λ ) and µ a ( λ ) extracted from these measurements.

Spatially resolved diffuse reflectance spectroscopy endoscopic sensing with custom Si photodetectors.

Early detection and surveillance of disease progression in epithelial tissue is key to improving long term patient outcomes for colon and esophageal cancers, which account for nearly a quarter of cancer related mortalities worldwide. Spatially resolved diffuse reflectance spectroscopy (SRDRS) is a non-invasive optical technique to sense biological changes at the cellular and sub-cellular level that occur when normal tissue becomes diseased, and has the potential to significantly improve the current standard of care for endoscopic gastrointestinal (GI) screening. Herein the design, fabrication, and characterization of the first custom SRDRS device to enable endoscopic SRDRS GI tissue characterization using a custom silicon (Si) thin film multi-pixel endoscopic optical sensor (MEOS) is described.

Chip-scale sensor system integration for portable health monitoring.

The revolution in integrated circuits over the past 50 yr has produced inexpensive computing and communications systems that are powerful and portable. The technologies for these integrated chip-scale sensing systems, which will be miniature, lightweight, and portable, are emerging with the integration of sensors with electronics, optical systems, micromachines, microfluidics, and the integration of chemical and biological materials (soft/wet material integration with traditional dry/hard semiconductor materials). Hence, we stand at a threshold for health monitoring technology that promises to provide wearable biochemical sensing systems that are comfortable, inauspicious, wireless, and battery-operated, yet that continuously monitor health status, and can transmit compressed data signals at regular intervals, or alarm conditions immediately. In this paper, we explore recent results in chip-scale sensor integration technology for health monitoring. The development of inexpensive chip-scale biochemical optical sensors, such as microresonators, that are customizable for high sensitivity coupled with rapid prototyping will be discussed. Ground-breaking work in the integration of chip-scale optical systems to support these optical sensors will be highlighted, and the development of inexpensive Si complementary metal-oxide semiconductor circuitry (which makes up the vast majority of computational systems today) for signal processing and wireless communication with local receivers that lie directly on the chip-scale sensor head itself will be examined.

Flexible silicon sensors for diffuse reflectance spectroscopy of tissue.

Diffuse reflectance spectroscopy (DRS) is being used in exploratory clinical applications such as cancer margin assessment on excised tissue. However, when interrogating nonplanar tissue anomalies can arise from non-uniform pressure. Herein is reported the design, fabrication, and test of flexible, thin film silicon photodetectors (PDs) bonded to a flexible substrate designed for use in conformal DRS. The PDs have dark currents and responsivities comparable to conventional Si PDs, and were characterized while flat and while flexed at multiple radii of curvature using liquid phantoms mimicking adipose and malignant breast tissue. The DRS and nearest neighbor crosstalk results were compared with Monte Carlo simulations, showing good agreement between simulation and experiment.

Miniature spectral imaging device for wide-field quantitative functional imaging of the morphological landscape of breast tumor margins.

We have developed a portable, breast margin assessment probe leveraging diffuse optical spectroscopy to quantify the morphological landscape of breast tumor margins during breast conserving surgery. The approach presented here leverages a custom-made 16-channel annular photodiode imaging array (arranged in a 4 × 4 grid), a raster-scanning imaging platform with precision pressure control, and compressive sensing with an optimized set of eight wavelengths in the visible spectral range. A scalable Monte-Carlo-based inverse model is used to generate optical property [ ? s ? ( ? ) and ? a ( ? ) ] measures for each of the 16 simultaneously captured diffuse reflectance spectra. Subpixel sampling (0.75 mm) is achieved through incremental x , y raster scanning of the imaging probe, providing detailed optical parameter maps of breast margins over a 2 × 2 ?? cm 2 area in ? 9 ?? min . The morphological landscape of a tumor margin is characterized using optical surrogates for the fat to fibroglandular content ratio, which has demonstrated diagnostic utility in delineating tissue subtypes in the breast.

Wavelength optimization for quantitative spectral imaging of breast tumor margins.

A wavelength selection method that combines an inverse Monte Carlo model of reflectance and a genetic algorithm for global optimization was developed for the application of spectral imaging of breast tumor margins. The selection of wavelengths impacts system design in cost, size, and accuracy of tissue quantitation. The minimum number of wavelengths required for the accurate quantitation of tissue optical properties is 8, with diminishing gains for additional wavelengths. The resulting wavelength choices for the specific probe geometry used for the breast tumor margin spectral imaging application were tested in an independent pathology-confirmed ex vivo breast tissue data set and in tissue-mimicking phantoms. In breast tissue, the optical endpoints (hemoglobin, ß-carotene, and scattering) that provide the contrast between normal and malignant tissue specimens are extracted with the optimized 8-wavelength set with <9% error compared to the full spectrum (450-600 nm). A multi-absorber liquid phantom study was also performed to show the improved extraction accuracy with optimization and without optimization. This technique for selecting wavelengths can be used for designing spectral imaging systems for other clinical applications.

A diffuse reflectance spectral imaging system for tumor margin assessment using custom annular photodiode arrays.

Diffuse reflectance spectroscopy (DRS) is a well-established method to quantitatively distinguish between benign and cancerous tissue for tumor margin assessment. Current multipixel DRS margin assessment tools are bulky fiber-based probes that have limited scalability. Reported herein is a new approach to multipixel DRS probe design, which utilizes direct detection of the DRS signal by using optimized custom photodetectors in direct contact with the tissue. This first fiberless DRS imaging system for tumor margin assessment consists of a 4 × 4 array of annular silicon photodetectors and a constrained free-space light delivery tube optimized to deliver light across a 256 mm(2) imaging area. This system has 4.5 mm spatial resolution. The signal-to-noise ratio measured for normal and malignant breast tissue-mimicking phantoms was 35 dB to 45 dB for λ = 470 nm to 600 nm.

Plasmon ruler with angstrom length resolution.

We demonstrate a plasmon nanoruler using a coupled film nanoparticle (film-NP) format that is well-suited for investigating the sensitivity extremes of plasmonic coupling. Because it is relatively straightforward to functionalize bulk surface plasmon supporting films, such as gold, we are able to precisely control plasmonic gap dimensions by creating ultrathin molecular spacer layers on the gold films, on top of which we immobilize plasmon resonant nanoparticles (NPs). Each immobilized NP becomes coupled to the underlying film and functions as a plasmon nanoruler, exhibiting a distance-dependent resonance red shift in its peak plasmon wavelength as it approaches the film. Due to the uniformity of response from the film-NPs to separation distance, we are able to use extinction and scattering measurements from ensembles of film-NPs to characterize the coupling effect over a series of very short separation distances-ranging from 5 to 20 Å-and combine these measurements with similar data from larger separation distances extending out to 27 nm. We find that the film-NP plasmon nanoruler is extremely sensitive at very short film-NP separation distances, yielding spectral shifts as large as 5 nm for every 1 Å change in separation distance. The film-NP coupling at extremely small spacings is so uniform and reliable that we are able to usefully probe gap dimensions where the classical Drude model of the conducting electrons in the metals is no longer descriptive; for gap sizes smaller than a few nanometers, either quantum or semiclassical models of the carrier response must be employed to predict the observed wavelength shifts. We find that, despite the limitations, large field enhancements and extreme sensitivity persist down to even the smallest gap sizes.