Hsa_circ_0005397 promotes hepatocellular carcinoma progression through EIF4A3.

PURPOSE: The purpose of this study was to explore the expression and potential mechanism of hsa_circ_0005397 in hepatocellular carcinoma progression. METHODS: Quantitative reverse transcription-polymerase chain reaction(qRT-PCR) was used to measure the expression level of hsa_circ_0005397 and EIF4A3 from paired HCC tissues and cell lines. Western Blot (WB) and immunohistochemistry (IHC) were used to verify the protein level of EIF4A3. The specificity of primers was confirmed by agarose gel electrophoresis. Receiver Operating Characteristic (ROC) Curve was drawn to analyze diagnostic value. Actinomycin D and nuclear and cytoplasmic extraction assays were utilized to evaluate the characteristics of hsa_circ_0005397. Cell Counting kit-8 (CCK-8) and colony formation assays were performed to detect cell proliferation. Flow cytometry analysis was used to detect the cell cycle. Transwell assay was performed to determine migration and invasion ability. RNA-binding proteins (RBPs) of hsa_circ_0005397 in HCC were explored using bioinformatics websites. The relationship between hsa_circ_0005397 and Eukaryotic Translation Initiation Factor 4A3 (EIF4A3) was verified by RNA Binding Protein Immunoprecipitation (RIP) assays, correlation and rescue experiments. RESULTS: In this study, hsa_circ_0005397 was found to be significantly upregulated in HCC, and the good diagnostic sensitivity and specificity shown a potential diagnostic capability. Upregulated expression of hsa_circ_0005397 was significantly related to tumor size and stage. Hsa_circ_0005397 was circular structure which more stable than liner mRNA, and mostly distributed in the cytoplasm. Upregulation of hsa_circ_0005397 generally resulted in stronger proliferative ability, clonality, and metastatic potency of HCC cells; its downregulation yielded the opposite results. EIF4A3 is an RNA-binding protein of hsa_circ_0005397, which overexpressed in paired HCC tissues and cell lines. In addition, expression of hsa_circ_0005397 decreased equally when EIF4A3 was depleted. RIP assays and correlation assay estimated that EIF4A3 could interacted with hsa_circ_0005397. Knockdown of EIF4A3 could reverse hsa_circ_0005397 function in HCC progression. CONCLUSIONS: Hsa_circ_0005397 promotes progression of hepatocellular carcinoma through EIF4A3. These research findings may provide novel clinical value for hepatocellular carcinoma.

Functional Photocatalysts: Material Design, Synthesis and Applications.

Rapid industrial and economic growth, experienced on a global scale, has been greatly facilitated by the extensive use and exploitation of traditional energy resources [...].

Recent Progress of Ion-Modified TiO2 for Enhanced Photocatalytic Hydrogen Production.

Harnessing solar energy to produce hydrogen through semiconductor-mediated photocatalytic water splitting is a promising avenue to address the challenges of energy scarcity and environmental degradation. Ever since Fujishima and Honda's groundbreaking work in photocatalytic water splitting, titanium dioxide (TiO2) has garnered significant interest as a semiconductor photocatalyst, prized for its non-toxicity, affordability, superior photocatalytic activity, and robust chemical stability. Nonetheless, the efficacy of solar energy conversion is hampered by TiO2's wide bandgap and the swift recombination of photogenerated carriers. In pursuit of enhancing TiO2's photocatalytic prowess, a panoply of modification techniques has been explored over recent years. This work provides an extensive review of the strategies employed to augment TiO2's performance in photocatalytic hydrogen production, with a special emphasis on foreign dopant incorporation. Firstly, we delve into metal doping as a key tactic to boost TiO2's capacity for efficient hydrogen generation via water splitting. We elaborate on the premise that metal doping introduces discrete energy states within TiO2's bandgap, thereby elevating its visible light photocatalytic activity. Following that, we evaluate the role of metal nanoparticles in modifying TiO2, hailed as one of the most effective strategies. Metal nanoparticles, serving as both photosensitizers and co-catalysts, display a pronounced affinity for visible light absorption and enhance the segregation and conveyance of photogenerated charge carriers, leading to remarkable photocatalytic outcomes. Furthermore, we consolidate perspectives on the nonmetal doping of TiO2, which tailors the material to harness visible light more efficiently and bolsters the separation and transfer of photogenerated carriers. The incorporation of various anions is summarized for their potential to propel TiO2's photocatalytic capabilities. This review aspires to compile contemporary insights on ion-doped TiO2, propelling the efficacy of photocatalytic hydrogen evolution and anticipating forthcoming advancements. Our work aims to furnish an informative scaffold for crafting advanced TiO2-based photocatalysts tailored for water-splitting applications.

Designing Organic Spin-Gapless Semiconductors via Molecular Adsorption on C4N3 Monolayer.

Spin-gapless semiconductor (SGS), a class of zero-gap materials with fully spin-polarized electrons and holes, offers significant potential for high-speed, low-energy consumption applications in spintronics, electronics, and optoelectronics. Our first-principles calculations revealed that the Pca21 C4N3 monolayer exhibits a ferromagnetic ground state. Its band structure displays SGS-like characteristics, with the energy gap between the valence and conduction bands near the Fermi level in the spin-down channel much smaller than the one in the other spin channel. To enhance its SGS properties, we introduced electrons into the Pca21 C4N3 monolayer by adsorbing the CO gas molecule on its surface. Stable gas adsorption (CO@C4N3) effectively narrowed the band gap in the spin-down channel without changing the band gap in the spin-up channel obviously. Moreover, injecting holes into the CO@C4N3 system could increase the net magnetic moments and induce an SGS-to-metallic phase transition, while injecting electrons into the CO@C4N3 system is able to lower the net magnetic moments and cause an SGS-to-half-metallic phase transition. Our findings not only underscore a new promising material for practical metal-free spintronics applications but also illustrate a viable pathway for designing SGSs.

Sc-Modified C3N4 Nanotubes for High-Capacity Hydrogen Storage: A Theoretical Prediction.

Utilizing hydrogen as a viable substitute for fossil fuels requires the exploration of hydrogen storage materials with high capacity, high quality, and effective reversibility at room temperature. In this study, the stability and capacity for hydrogen storage in the Sc-modified C3N4 nanotube are thoroughly examined through the application of density functional theory (DFT). Our finding indicates that a strong coupling between the Sc-3d orbitals and N-2p orbitals stabilizes the Sc-modified C3N4 nanotube at a high temperature (500 K), and the high migration barrier (5.10 eV) between adjacent Sc atoms prevents the creation of metal clusters. Particularly, it has been found that each Sc-modified C3N4 nanotube is capable of adsorbing up to nine H2 molecules, and the gravimetric hydrogen storage density is calculated to be 7.29 wt%. It reveals an average adsorption energy of -0.20 eV, with an estimated average desorption temperature of 258 K. This shows that a Sc-modified C3N4 nanotube can store hydrogen at low temperatures and harness it at room temperature, which will reduce energy consumption and protect the system from high desorption temperatures. Moreover, charge donation and reverse transfer from the Sc-3d orbital to the H-1s orbital suggest the presence of the Kubas effect between the Sc-modified C3N4 nanotube and H2 molecules. We draw the conclusion that a Sc-modified C3N4 nanotube exhibits exceptional potential as a stable and efficient hydrogen storage substrate.

Effect of Intrinsic Ferroelectric Phase Transition on Hydrogen Evolution Electrocatalysis.

Heterogeneous electrocatalysis closely relies on the electronic structure of the catalytic materials. The ferroelectric-to-paraelectric phase transition of the materials also involves a change in the state of electrons that could impact the electrocatalytic activity, but such correlation remains unexplored. Here, we demonstrate experimentally and theoretically that the intrinsic electrocatalytic activity could be regulated as exampled by hydrogen evolution reaction catalysis over two-dimensional ferroelectric CuInP2S6. The obvious discontinuity in the overpotential and apparent activation energy values for CuInP2S6 electrode are illustrated during the ferroelectric-to-paraelectric phase transition caused by copper displacement around Tc point (318 K), revealing the ferroelectro-catalytic effect on thermodynamics and kinetics of electrocatalysis. When loading Pt single atom on the CuInP2S6, the paraelectric phase one showed an improved hydrogen evolution activity with smaller apparent activation energy over the ferroelectric phase counterpart. This is attributed to the copper hopping between two sulfur planes, which alternate between strong and weak H adsorption at the Pt sites to simultaneously promote H+ reactant adsorption and H2 product desorption.

Controllable Electrocatalytic to Photocatalytic Conversion in Ferroelectric Heterostructures.

Photocatalytic and electrocatalytic reactions to produce value-added chemicals offer promising solutions for addressing the energy crisis and environmental pollution. Photocatalysis is driven by light excitation and charge separation and relies on semiconducting catalysts, while electrocatalysis is driven by external electric current and is mostly based on metallic catalysts with high electrical conductivity. Due to the distinct reaction mechanism, the conversion between the two catalytic types has remained largely unexplored. Herein, by means of density functional theory (DFT) simulations, we demonstrated that the ferroelectric heterostructures Mo-BN@In2Se3 and WSe2@In2Se3 can exhibit semiconducting or metallic features depending on the polarization direction as a result of the built-in field and electron transfer. Using the nitrogen reduction reaction (NRR) and hydrogen evolution reaction (HER) as examples, the metallic heterostructures act as excellent electrocatalysts for these reactions, while the semiconducting heterostructures serve as the corresponding photocatalysts with improved optical absorption, enhanced charge separation, and low Gibbs free energy change. The findings not only bridge physical phenomena of the electronic phase transition with chemical reactions but also offer a new and feasible approach to significantly improve the catalytic efficiency.

Histone demethylase LSD1 promotes RIG-I poly-ubiquitination and anti-viral gene expression.

Under RNA virus infection, retinoic acid-inducible gene I (RIG-I) in host cells recognizes viral RNA and activates the expression of type I IFN. To investigate the roles of protein methyltransferases and demethylases in RIG-I antiviral signaling pathway, we screened all the known related enzymes with a siRNA library and identified LSD1 as a positive regulator for RIG-I signaling. Exogenous expression of LSD1 enhances RIG-I signaling activated by virus stimulation, whereas its deficiency restricts it. LSD1 interacts with RIG-I, promotes its K63-linked polyubiquitination and interaction with VISA/MAVS. Interestingly, LSD1 exerts its function in antiviral response not dependent on its demethylase activity but through enhancing the interaction between RIG-I with E3 ligases, especially TRIM25. Furthermore, we provide in vivo evidence that LSD1 increases antiviral gene expression and inhibits viral replication. Taken together, our findings demonstrate that LSD1 is a positive regulator of signaling pathway triggered by RNA-virus through mediating RIG-I polyubiquitination.

Adaptive optimization technology of a conformal infrared dome based on the Von Karman surface under hypersonic conditions.

With the advent of the hypersonic era, diverse combat methods of hypersonic precision-guided weapons have been gradually developed. This study focuses on the precise design of a conformal infrared dome to accommodate different working conditions. To achieve this, an adaptive optimization technology for configuring conformal infrared domes is proposed, employing a multi-objective genetic algorithm. The technology enables the dome to dynamically balance its aerodynamic and imaging performance, taking into account the specific characteristics of each working condition. Moreover, it streamlines the design process of the conformal infrared domes. By optimizing the design with von Karman surfaces, we can overcome the limitations associated with the traditional quadric configuration. In order to evaluate its performance, a comparison was made with a conventional ellipsoid dome. The results indicate that, under the same working conditions, the air drag coefficient of the optimized infrared dome is reduced by 34.29% and that the peak signal-to-noise ratio of the distorted image from the infrared detection system is increased by 1.7%. We have demonstrated the effectiveness of the optimization method to balance aerodynamic performance and optical performance. Hopefully, our new method will improve the comprehensive performance of the infrared dome as well as the guidance capability of infrared detection technology.

Optical performance evaluation of an infrared system of a hypersonic vehicle in an aero-thermal environment.

At hypersonic velocities, the turbulent flow field generated by an aircraft, along with its temperature distribution, leads to significant aerodynamic optical effects that severely impede the performance of internal optical systems. This study proposes a method for analyzing the temporal characteristics of imaging degradation in a detector window infrared imaging system under different field angles of hypersonic velocity. Based on heat transfer theory, a method for solving the transient temperature field in the optical window of a high-speed aircraft is derived and established, considering unsteady thermal conduction-radiation coupling. Additionally, an optical window radiation tracing method is introduced, which directly determines the initial direction vector of light reaching the detector. This method reduces the workload of radiation transmission, significantly enhancing the efficiency of radiation calculations. The time characteristics of image degradation caused by aero-optical effects in high-speed aircraft are analyzed using metrics such as peak signal-to-noise ratio, wave aberration, and point diffusion function. The results demonstrate that as working time increases and the viewing angle widens, the impact of aero-optics on the aircraft imaging system becomes more severe. Moreover, compared to the aerodynamic light transmission effect, the aerodynamic thermal radiation effect has a more detrimental influence on imaging quality.

Hierarchical deconvolution dehazing method based on transmission map segmentation.

Images captured in fog are often affected by scattering. Due to the absorption and scattering of light by aerosols and water droplets, the image quality will be seriously degraded. The specific manifests are brightness decrease, contrast decrease, image blur, and noise increase. In the single-image dehazing method, the image degradation model is essential. In this paper, an effective image degradation model is proposed, in which the hierarchical deconvolution strategy based on transmission map segmentation can effectively improve the accuracy of image restoration. Specifically, the transmission map is obtained by using the dark channel prior (DCP) method, then the transmission histogram is fitted. The next step is to divide the image region according to the fitting results. Furthermore, to more accurately recover images of complex objects with a large depth of field, different levels of inverse convolution are adopted for different regions. Finally, the sub-images of different regions are fused to get the dehazing image. We tested the proposed method using synthetic fog images and natural fog images respectively. The proposed method is compared with eight advanced image dehazing methods on quantitative rating indexes such as peak signal-to-noise ratio (PSNR), structural similarity (SSIM), image entropy, natural image quality evaluator (NIQE), and blind/referenceless image spatial quality evaluator (BRISQUE). Both subjective and objective evaluations show that the proposed method achieves competitive results.

Expression and function of myelin expression factor 2 in hepatocellular carcinoma.

INTRODUCTION: Hepatocellular carcinoma (HCC) is one of the most common malignant tumours in the world and has a high mortality rate. However, the pathogenesis of HCC remains unclear. This study aimed to investigate the potential biomarkers of HCC. METHODS: ONCOMINE, HCCDB and THE HUMAN PROTEIN ATLAS were used to identify myelin expression factor 2 (MYEF2) as a potential biomarker for HCC. The Cancer Genome Atlas database was used to further validate and analyse the value of MYEF2. Kaplan-Meier Plotter was used for the prognostic analysis. The COX regression model and Kaplan-Meier method were used to investigate the clinical value of MYEF2 in the prognosis of HCC by reviewing the survival status of patients. Fluorescent quantitative polymerase chain reaction (qPCR) and immunohistochemistry were used to detect the expressions of the MYEF2 mRNA and protein in HCC tissues and cell lines. qPCR and Western blotting were used to validate the efficiency of MYEF2 knockout and overexpression in HCC cells. The invasion and migration abilities regulated by MYEF2 were detected by performing transwell and wound healing assays. RESULTS: MYEF2 is significantly upregulated in HCC and is mainly located in the nucleus of HCC cells. MYEF2 expression is significantly associated with the tumour stage, histological grade and TNM stage. High MYEF2 expression is an independent prognostic factor for patients with HCC. Functionally, elevated MYEF2 facilitated cell migration and invasion in vitro. In contrast, decreased MYEF2 inhibited cell migration and invasion. CONCLUSIONS: MYEF2 may be a novel biomarker with potential diagnosis and prognosis values and as a potential therapeutic target for HCC.

Two-dimensional InTeClO3: an ultrawide-bandgap material with potential application in a deep ultraviolet photodetector.

Ultrawide-bandgap semiconductors, possessing bandgaps distinctly larger than the 3.4 eV of GaN, have emerged as a promising class capable of achieving deep ultraviolet (UV) light detection. Based on first-principles calculations, we propose an unexplored two-dimensional (2D) InTeClO3 layered system with ultrawide bandgaps ranging from 4.34 eV of bulk to 4.54 eV of monolayer. Our calculations demonstrate that 2D InTeClO3 monolayer can be exfoliated from its bulk counterpart and maintain good thermal and dynamic stability at room temperature. The ultrawide bandgaps may be modulated by the small in-plane strains and layer thickness in a certain range. Furthermore, the 2D InTeClO3 monolayer shows promising electron transport behavior and strong optical absorption capacity in the deep UV range. A two-probe InTeClO3-based photodetection device has been constructed for evaluating the photocurrent. Remarkably, the effective photocurrent (5.7 A m-2 at photon energy of 4.2 eV) generation under polarized light has been observed in such a photodetector. Our results indicate that 2D InTeClO3 systems have strong photoresponse capacity in the deep UV region, accompanying the remarkable polarization sensitivity and high extinction ratio. These distinctive characteristics highlight the promising application prospects of InTeClO3 materials in the field of deep UV optoelectronics.

The charge effects on the hydrogen evolution reaction activity of the defected monolayer MoS2.

Doping engineering has proven to be an effective way to tune the hydrogen evolution reaction (HER) activity of MoS2. Introducing these defects could cause the overall charge imbalance of MoS2, which makes MoS2 charged. In order to understand the effect of charge on the HER activity of the defected MoS2, we systematically investigate the formation energies, hydrogen adsorption Gibbs free energy (), and electronic structures of 3d, 4d, and 5d transition metal (TM) doped monolayer MoS2 with S vacancies (Svac) based on the density functional theory (DFT) calculations. According to the formation energy calculation, Svac in the 0 and -1 charge states (S0vac and Svac1-) is found to be stable. of Svac1- is -0.16 eV, suggesting its HER catalytic activity is lower than that of Pt (), which is consistent with the experimental results. By substituting the Mo atom with TM atoms, we found that the TM atoms in groups VB-VIIB can promote the generation of Svac, forming defect complexes (TMMoSvac). is greatly affected by the charge state of defects; TMMoSvac defects (TM = V, Nb, Ta, Cr, W, Mn, and Re) in -1 charge states exhibited excellent HER activity (). Significantly, W and Re doping can promote the HER activity of MoS2 independent of the charge state and the Fermi level, which suggests that W and Re doping are most beneficial to improve the HER activity of MoS2. Therefore, the HER activity of defected MoS2 is not only influenced by as previously thought, but also by formation energies, charge state and Fermi level position of defects. The underlying physics could be deduced from the charge-induced changes in electronic structures. Our work highlights the defect charge effects on the electrochemical reactions and offers plausible mechanisms of defect charge effects.

Single Selenium Atomic Vacancy Enabled Efficient Visible-Light-Response Photocatalytic NO Reduction to NH3 on Janus WSSe Monolayer.

The NO reduction reaction (NORR) toward NH3 is simultaneously emerging for both detrimental NO elimination and valuable NH3 synthesis. An efficient NORR generally requires a high degree of activation of the NO gas molecule from the catalyst, which calls for a powerful chemisorption. In this work, by means of first-principles calculations, we discovered that the NO gas molecule over the Janus WSSe monolayer might undergo a physical-to-chemical adsorption transition when Se vacancy is introduced. If the Se vacancy is able to work as the optimum adsorption site, then the interface's transferred electron amounts are considerably increased, resulting in a clear electronic orbital hybridization between the adsorbate and substrate, promising excellent activity and selectivity for NORR. Additionally, the NN bond coupling and *N diffusion of NO molecules can be effectively suppressed by the confined space of Se vacancy defects, which enables the active site to have the superior NORR selectivity in the NH3 synthesis. Moreover, the photocatalytic NO-to-NH3 reaction is able to occur spontaneously under the potentials solely supplied by the photo-generated electrons. Our findings uncover a promising approach to derive high-efficiency photocatalysts for NO-to-NH3 conversion.

Armchair Janus WSSe Nanotube Designed with Selenium Vacancy as a Promising Photocatalyst for CO2 Reduction.

Photocatalytic conversion of carbon dioxide into chemical fuels offers a promising way to not only settle growing environmental problems but also provide a renewable energy source. In this study, through first-principles calculation, we found that the Se vacancy introduction can lead to the transition of physical-to-chemical CO2 adsorption on Janus WSSe nanotube. Se vacancies work at the adsorption site, which significantly improves the amount of transferred electrons at the interface, resulting in the enhanced electron orbital hybridization between adsorbents and substrates, and promising the high activity and selectivity for carbon dioxide reduction reaction (CO2RR). Under the condition of illumination, due to the adequate driving forces of photoexcited holes and electrons, oxygen generation reaction (OER) and CO2RR can occur spontaneously on the S and Se sides of the defective WSSe nanotube, respectively. The CO2 could be reduced into CH4, meanwhile, the O2 is produced by the water oxidation, which also provides the hydrogen and electron source for the CO2RR. Our finding reveals a candidate photocatalyst for obtaining efficient photocatalytic CO2 conversion.

NO2 Physical-to-Chemical Adsorption Transition on Janus WSSe Monolayers Realized by Defect Introduction.

As is well known, NO2 adsorption plays an important role in gas sensing and treatment because it expands the residence time of compounds to be treated in plasma-catalyst combination. In this work, the adsorption behaviors and mechanism of NO2 over pristine and Se-vacancy defect-engineered WSSe monolayers have been systematically investigated using density functional theory (DFT). The adsorption energy calculation reveals that introducing Se vacancy acould result in a physical-to-chemical adsorption transition for the system. The Se vacancy, the most possible point defect, could work as the optimum adsorption site, and it dramatically raises the transferred-electron quantities at the interface, creating an obviously electronic orbital hybridization between the adsorbate and substrate and greatly improving the chemical activity and sensing sensitivity of the WSSe monolayer. The physical-to-chemical adsorption transition could meet different acquirements of gas collection and gas treatment. Our work broadens the application filed of the Janus WSSe as NO2-gas-sensitive materials. In addition, it is found that both keeping the S-rich synthetic environments and applying compression strain could make the introduction of Se vacancy easier, which provides a promising path for industrial synthesis of Janus WSSe monolayer with Se vacancy.

Deficiency of Histone Methyltransferase SET Domain-Containing 2 in Liver Leads to Abnormal Lipid Metabolism and HCC.

BACKGROUND AND AIMS: Trimethylation of Lys36 on histone 3 (H3K36me3) catalyzed by histone methyltransferase SET domain-containing 2 (SETD2) is one of the most conserved epigenetic marks from yeast to mammals. SETD2 is frequently mutated in multiple cancers and acts as a tumor suppressor. APPROACH AND RESULTS: Here, using a liver-specific Setd2 depletion model, we found that Setd2 deficiency is sufficient to trigger spontaneous HCC. Meanwhile, Setd2 depletion significantly increased tumor and tumor size of a diethylnitrosamine-induced HCC model. The mechanistic study showed that Setd2 suppresses HCC not only through modulating DNA damage response, but also by regulating lipid metabolism in the liver. Setd2 deficiency down-regulated H3K36me3 enrichment and expression of cholesterol efflux genes and caused lipid accumulation. High-fat diet enhanced lipid accumulation and promoted the development of HCC in Setd2-deficient mice. Chromatin immunoprecipitation sequencing analysis further revealed that Setd2 depletion induced c-Jun/activator protein 1 (AP-1) activation in the liver, which was trigged by accumulated lipid. c-Jun acts as an oncogene in HCC and functions through inhibiting p53 in Setd2-deficient cells. CONCLUSIONS: We revealed the roles of Setd2 in HCC and the underlying mechanisms in regulating cholesterol homeostasis and c-Jun/AP-1 signaling.

Tunable Photocatalytic Water Splitting Performance of Armchair MoSSe Nanotubes Realized by Polarization Engineering.

The photocatalytic properties of Janus transition metal dichalcogenide (TMD) nanotubes are closely correlated with the electrostatic potential difference between their inner and outer surfaces (ΔΦ). However, due to some distraction from the tubular structures, it remains a great challenge to calculate their ΔΦ directly. Here, we creatively work out the ΔΦ of Janus MoSSe armchair single-walled nanotubes (A-SWNTs) with their corresponding building block models by first-principles calculations. The ΔΦ increases as the diameter reduces. After considering ΔΦ, we find that all of these MoSSe A-SWNTs possess suitable band-edge positions required for water redox reactions and high solar-to-hydrogen (STH) conversion efficiencies. The built-in field induced by the ΔΦ promotes the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) to proceed separately on the inner and outer surfaces. Especially, the photoexcited carriers exhibit adequate driving forces for OER and HER. Besides, constructing a double-walled nanotube can dramatically increase ΔΦ, which also further improves the separation and redox capacity of photoexcited carriers as well as the STH conversion efficiency. Moreover, all of these MoSSe armchair nanotubes have outstanding optical absorption in the visible light range. Our studies provide an effective strategy to improve the photocatalytic water-splitting performance of Janus TMD nanotubes.

High electron mobility and wide-bandgap properties in a novel 1D PdGeS3 nanochain.

As a versatile platform, one-dimensional (1D) electronic systems host plenty of excellent merits, such as high length-to-diameter ratios, flexible mechanical properties, and manageable electronic characteristics, which endow them with significant potential applications in catalysts, flexible wearable devices, and multifunctional integrated circuits. Herein, based on first-principles calculations, we propose a versatile 1D PdGeS3 nanochain system. Our calculations show that the 1D PdGeS3 nanochain can be synthesized simply from its bulk crystal by exfoliation methods and can stably exist at room temperature. The 1D PdGeS3 nanochain is an indirect semiconductor with a wide bandgap of 2.86 eV, and such a bandgap can be effectively modulated by strain. Remarkably, the electron mobility of the 1D PdGeS3 nanochain reaches as high as 1506 cm2 V-1 s-1, which is one to two orders of magnitude larger than those of most reported 1D materials and even some 2D materials. Such high electron mobility accompanied with low hole mobility endow the 1D PdGeS3 nanochain with the capacity of the separation of carriers. Our work shows that the 1D PdGeS3 nanochain is a promising candidate for applications in novel multifunctional nanoelectronic devices.