Sequential hydrotalcite precipitation, microbial sulfate reduction and in situ hydrogen sulfide removal for neutral mine drainage treatment.

This study proposed and examined a new process flowsheet for treating neutral mine drainage (NMD) from an open-pit gold mine. The process consisted of three sequential stages: (1) in situ hydrotalcite (HT) precipitation; (2) low-cost carbon substrate driven microbial sulfate reduction; and (3) ferrosol reactive barrier for removing biogenic dissolved hydrogen sulfide (H2S). For concept validation, laboratory-scale columns were established and operated for a 140-days period with key process performance parameters regularly measured. At the end, solids recovered from various depths of the ferrosol column were analysed for elemental composition and mineral phases. Prokaryotic microbial communities in various process locations were characterised using 16S rRNA gene sequencing. Results showed that the Stage 1 HT-treatment substantially removed a range of elements (As, B, Ba, Ca, F, Zn, Si, and U) in the NMD, but not nitrate or sulfate. The Stage 2 sulfate reducing bioreactor (SRB) packed with 70 % (v/v) Eucalyptus woodchip, 1 % (w/v) ground (<1 mm) dried Typha biomass, and 10 % (w/v) NMD-pond sediment facilitated complete nitrate removal and stable sulfate removal of ca. 50 % (50 g-SO4 m-3 d-1), with an average H2S generation rate of 10 g-H2S m-3d-1. The H2S-removal performance of the Stage 3 ferrosol column was compared with a synthetic amorphous Fe-oxyhydroxide-amended sand control column. Although both columns facilitated excellent (95-100 %) H2S removal, the control column only enabled a further ca. 10 % sulfate reduction, giving an overall sulfate removal of 56 %. In contrast, the ferrosol enabled an extra 99.9 % sulfate reduction in the SRB effluent, leading to a near complete sulfate removal. Overall, the process successfully eliminated a range of metal/metalloid contaminants, nitrate, sulfate (2500 mg-SO4 L-1 in the NMD to <10 mg-SO4 L-1 in the final effluent) and H2S (>95 % removal). Further optimisation is required to minimise release of ferrous iron from the ferrosol barrier into the final effluent.

Prokaryotic microbial ecology as an ecosurveillance tool for eukaryotic pathogen colonisation: Meiothermus and Naegleria fowleri.

Naegleria fowleri has been detected in drinking water distribution systems (DWDS) in Australia, Pakistan and the United States and is the causative agent of the highly fatal disease primary amoebic meningoencephalitis. Previous small scale field studies have shown that Meiothermus may be a potential biomarker for N. fowleri. However, correlations between predictive biomarkers in small sample sizes often breakdown when applied to larger more representative datasets. This study represents one of the largest and most rigorous temporal investigations of Naegleria fowleri colonisation in an operational DWDS in the world and measured the association of Meiothermus and N. fowleri over a significantly larger space and time in the DWDS. A total of 232 samples were collected from five sites over three-years (2016-2018), which contained 29 positive N. fowleri samples. Two specific operational taxonomic units assigned to M. chliarophilus and M. hypogaeus, were significantly associated with N. fowleri presence. Furthermore, inoculation experiments demonstrated that Meiothermus was required to support N. fowleri growth in field-collected biofilms. This validates Meiothermus as prospective biological tool to aid in the identification and surveillance of N. fowleri colonisable sites.