RESUMEN
In the current study, the effect of rGO ratio on the N-dopped TiO2has been synthesized through sol-gel method. The prepared N-doped TiO2/rGO composites were examined for humidity sensing applications. The relationship between optical properties and the humidity sensing properties was studied. The structure, morphology, and bonding interaction have been examined using XRD, FT-IR, PL and HRTEM respectively. The average particle size as estimated from XRD and HRTEM was found to be about 9 nm. The optical properties have been studied using UV/ Vis. Spectroscopy. Further, optical parameters including refractive index and optical band gap energy have been estimated. The humidity sensing behavior of the resultant composites were evaluated in a wide range of humidity (7%-97% RH) at different testing frequencies. The optical band gap was found to be decreased as the amount of rGO increase. Among all prepared samples, both the optical parameters and humidity sensing experiments confirmed that the 0.5% rGO@N-dopped TiO2sample is the best candidate for the humidity sensing applications. The best optimum testing frequency was demonstrated to be 50 Hz. The sensor demonstrates a fast response and recovery times of 13 s and 33 s with low hysteresis and large sensitivity. The humidity sensing mechanism was studied using complex impedance spectroscopy at different RH levels under testing frequency range from 50 Hz to 5 MHz and testing voltage of 1 VAC. The produced structure demonstrated a promising material for humidity measuring devices.
RESUMEN
BACKGROUND: To assess histologically the success of the pulp capping approach performed in traumatically exposed dogs' teeth using a novel injectable gelatin-treated dentin matrix light cured hydrogel (LCG-TDM) compared with LCG, MTA and TheraCal LC. METHODS: Sixty-four dogs' teeth were divided into two groups (each including 32 teeth) based on the post-treatment evaluation period: group I: 2 weeks and group II: 8 weeks. Each group was further subdivided according to the pulp capping material into four subgroups (n = 8), with subgroup A (light-cured gelatin hydrogel) as the control subgroup, subgroup B (LCG-TDM), subgroup C (TheraCal LC), and subgroup D (MTA). Pulps were mechanically exposed in the middle of the cavity floor and capped with different materials. An assessment of periapical response was performed preoperatively and at 8 weeks. After 2 and 8-week intervals, the dogs were sacrificed, and the teeth were stained with hematoxylin-eosin and graded by using a histologic scoring system. Statistical analysis was performed using the chi-square and Kruskal-Wallis tests (p = 0.05). RESULTS: All subgroups showed mild inflammation with normal pulp tissue at 2 weeks with no significant differences between subgroups (p ≤ 0.05), except for the TheraCal LC subgroup, which exhibited moderate inflammation (62.5%). Absence of a complete calcified bridge was reported in all subgroups at 2 weeks, while at 8 weeks, the majority of samples in the LCG-TDM and MTA-Angelus subgroups showed complete dentin bridge formation and absence of inflammatory pulp response with no significant differences between them (p ≤ 0.05). However, the formed dentin in the LCG-TDM group was significantly thicker, with layers of ordered odontoblasts identified to create a homogeneous tubular structure and numerous dentinal tubule lines suggesting a favourable trend towards dentin regeneration. TheraCal LC samples revealed a reasonably thick dentin bridge with moderate inflammation (50%) and LCG showed heavily fibrous tissue infiltrates with areas of degenerated pulp with no signs of hard tissue formation. CONCLUSIONS: LCG-TDM, as an extracellular matrix-based material, has the potential to regenerate dentin and preserve pulp vitality, making it a viable natural alternative to silicate-based cements for healing in vivo dentin defects in direct pulp-capping procedures.
Asunto(s)
Dentina Secundaria , Materiales de Recubrimiento Pulpar y Pulpectomía , Animales , Perros , Compuestos de Calcio/uso terapéutico , Pulpa Dental/patología , Recubrimiento de la Pulpa Dental/métodos , Dentina , Dentina Secundaria/patología , Combinación de Medicamentos , Gelatina/uso terapéutico , Hidrogeles/uso terapéutico , Inflamación/patología , Óxidos/uso terapéutico , Materiales de Recubrimiento Pulpar y Pulpectomía/uso terapéutico , Silicatos/uso terapéuticoRESUMEN
BACKGROUND: In recent years, treated dentin matrix (TDM) has been introduced as a bioactive hydrogel for dentin regeneration in DPC. However, no study has introduced TDM as a photocrosslinkable hydrogel with a natural photoinitiating system. Therefore, the present study aimed to explore the synthesis, characterizations and grafting optimization of injectable gelatin- glycidyl methacrylate (GMA)/TDM hydrogels as a novel photocrosslinkable pulp capping agent for dentin regeneration. METHODS: G-GMA/TDM hydrogel was photocrosslinked using a new two-component photoinitiating system composed of riboflavin as a photoinitiator under visible light and glycine as a first time coinitiator with riboflavin. The grafting reaction conditions of G-GMA/TDM e.g. GMA concentration and reaction time were optimized. The kinetic parameters e.g. grafting efficiency (GE) and grafting percentage (GP%) were calculated to optimize the grafting reaction, while yield (%) was determined to monitor the formation of the hydrogel. Moreover, G-GMA/TDM hydrogels were characterized by swelling ratio, degradation degree, and cytotoxicity. The instrumental characterizations e.g. FTIR, 1H-NMR, SEM and TGA, were investigated for verifying the grafting reaction. Statistical analysis was performed using F test (ANOVA) and Post Hoc Test (P = 0.05). RESULTS: The grafting reaction dramatically increased with an increase of both GMA concentration and reaction time. It was realized that the swelling degree and degradation rate of G-GMA/TDM hydrogels were significantly reduced by increasing the GMA concentration and prolonging the reaction time. When compared to the safe low and moderate GMA content hydrogels (0.048, 0.097 M) and shorter reaction times (6, 12, 24 h), G-GMA/TDM with high GMA contents (0.195, 0.391 M) and a prolonged reaction time (48 h) demonstrated cytotoxic effects against cells using the MTT assay. Also, the morphological surface of G-GMA/TDM freeze-dried gels was found more compacted, smooth and uniform due to the grafting process. Significant thermal stability was noticed due to the grafting reaction of G-GMA/TDM throughout the TGA results. CONCLUSIONS: G-GMA/TDM composite hydrogel formed by the riboflavin/glycine photoinitiating system is a potential bioactive and biocompatible system for in-situ crosslinking the activated-light pulp capping agent for dentin regeneration.
Asunto(s)
Gelatina , Materiales de Recubrimiento Pulpar y Pulpectomía , Humanos , Gelatina/metabolismo , Hidrogeles/química , Hidrogeles/metabolismo , Regeneración , Dentina/metabolismoRESUMEN
Objectives: Chitosan (CTS) has been a popular option for scaffold fabrication because of its biocompatibility, biodegradability, antimicrobial and nonimmunogenic effects. However, it is of limited function, due to its low mechanical strength and its solubility in acidified media. These limitations could be overcome by its blending with PVA and incorporation with bioactive materials to improve its mechanical properties and tissue regeneration capability. Methods: Carbon based nanomaterials, such as graphene oxide (GO) incorporated with CTS/PVA blend to improve composite-scaffold stability. GO nanoparticles were chemically prepared and fully characterized. Different concentrations of both CTS and nano-GO were used for the fabrication of CTS/PVA/GO nanocomposite films through the solvent-casting method. The mechanical properties, thermal stability biodegradation, and swelling of the nanocomposite films were evaluated after characterization by XRD, FTIR and SEM, to detect the effect of GO incorporation in the scaffold to select the suitable dental application. Results: A better performance was observed in thermal stability, biodegradation, and water resistance after GO addition into CTS/PVA scaffolds. Regarding mechanical properties, groups were assessed by Kruskal Wallis test afterward Dunn's post hoc test. There was no significant difference in tensile strength between the nanocomposite films of CTS (2%) and CTS (3%). The tensile strength decreased after addition of nano-GO at different concentrations. The elastic modulus significantly increased when (1%) GO was added into the 1CTS (2%):1PVA. Conclusions: CTS/PVA/GO nanocomposite can be used in dental hard tissue engineering, as the incorporation of GO into the CTS/PVA polymer blend improves its properties which is regarded as the critical concentrations of CTS and GO.
RESUMEN
In this study, Ziziphus spina christi leaves was used to synthesize a trimetallic CuO/Ag/ZnO nanocomposite by a simple and green method. Many characterizations e.g. FTIR, UV-vis DRS, SEM-EDX, TEM, XRD, zeta-size analysis, and DLS, were used to confirm green-synthesized trimetallic CuO/Ag/ZnO nanocomposite. The green, synthesized trimetallic CuO/Ag/ZnO nanocomposite exhibited a spherical dot-like structure, with an average particle size of around 7.11 ± 0.67 nm and a zeta potential of 21.5 mV. An extremely homogeneous distribution of signals, including O (79.25%), Cu (13.78%), Zn (4.42%), and Ag (2.55%), is evident on the surface of green-synthetic nanocomposite, according to EDX data. To the best of our knowledge, this is the first study to effectively use an industrially produced green trimetallic CuO/Ag/ZnO nanocomposite as a potent antimicrobial agent by employing different statistically experimental designs. The highest yield of green synthetic trimetallic CuO/Ag/ZnO nanocomposite was (1.65 mg/mL), which was enhanced by 1.85 and 5.7 times; respectively, by using the Taguchi approach in comparison to the Plackett-Burman strategy and basal condition. A variety of assays techniques were utilized to evaluate the antimicrobial capabilities of the green-synthesized trimetallic CuO/Ag/ZnO nanocomposite at a 200 µg/mL concentration against multidrug-resistant human pathogens. After a 36-h period, the tested 200 µg/mL of the green-synthetic trimetallic CuO/Ag/ZnO nanocomposite effectively reduced the planktonic viable counts of the studied bacteria, Escherichia coli and Staphylococcus aureus, which showed the highest percentage of biofilm reduction (98.06 ± 0.93 and 97.47 ± 0.65%; respectively).
Asunto(s)
Cobre , Tecnología Química Verde , Nanocompuestos , Extractos Vegetales , Plata , Óxido de Zinc , Ziziphus , Óxido de Zinc/química , Óxido de Zinc/farmacología , Nanocompuestos/química , Cobre/química , Extractos Vegetales/química , Ziziphus/química , Plata/química , Tecnología Química Verde/métodos , Antiinfecciosos/farmacología , Antiinfecciosos/química , Antiinfecciosos/síntesis química , Pruebas de Sensibilidad Microbiana , Antibacterianos/farmacología , Antibacterianos/química , Antibacterianos/síntesis química , Escherichia coli/efectos de los fármacosRESUMEN
Due to their high specific surface area and its characteristic's functionalized nanomaterials have great potential in medical applications specialty, as an anticancer. Herein, functional nanoparticles (NPs) based on iron oxide Fe2O3, iron oxide modified with copper oxide Fe2O3@CuO, and tungsten oxide WO3 were facile synthesized for biomedical applications. The obtained nanomaterials have nanocrystal sizes of 35.5 nm for Fe2O3, 7 nm for Fe2O3@CuO, and 25.5 nm for WO3. In addition to octahedral and square nanoplates for Fe2O3, and WO3; respectively. Results revealed that Fe2O3, Fe2O3@CuO, and WO3 NPs showed remarked anticancer effects versus a safe effect on normal cells through cytotoxicity test using MTT-assay. Notably, synthesized NPs e.g. our result demonstrated that Fe2O3@CuO exhibited the lowest IC50 value on the MCF-7 cancer cell line at about 8.876 µg/ml, compared to Fe2O3 was 12.87 µg/ml and WO3 was 9.211 µg/ml which indicate that the modification NPs Fe2O3@CuO gave the highest antiproliferative effect against breast cancer. However, these NPs showed a safe mode toward the Vero normal cell line, where IC50 were monitored as 40.24 µg/ml for Fe2O3, 21.13 µg/ml for Fe2O3@CuO, and 25.41 µg/ml for WO3 NPs. For further evidence. The antiviral activity using virucidal and viral adsorption mechanisms gave practiced effect by viral adsorption mechanism and prevented the virus from replicating inside the cells. Fe2O3@CuO and WO3 NPs showed a complete reduction in the viral load synergistic effect of combinations between the tested two materials copper oxide instead of iron oxide alone. Interestingly, the antimicrobial efficiency of Fe2O3@CuO NPs, Fe2O3NPs, and WO3NPs was evaluated using E. coli, S. aureus, and C. albicans pathogens. The widest microbial inhibition zone (ca. 38.45 mm) was observed with 250 mg/ml of WO3 NPs against E. coli, whereas using 40 mg/ml of Fe2O3@CuO NPS could form microbial inhibition zone ca. 32.86 mm against S. aureus. Nevertheless, C. albicans was relatively resistant to all examined NPs. The superior biomedical activities of these nanostructures might be due to their unique features and accepted evaluations.
Asunto(s)
Compuestos Férricos , Nanopartículas del Metal , Nanopartículas , Cobre/química , Staphylococcus aureus , Escherichia coli , Nanopartículas/química , Óxidos/farmacología , Óxidos/química , Nanopartículas del Metal/química , Antibacterianos/farmacologíaRESUMEN
In this work, Tamarindus indica (T. indica)-loaded crosslinked poly(methyl methacrylate) (PMMA)/cellulose acetate (CA)/poly(ethylene oxide) (PEO) electrospun nanofibers were designed and fabricated for wound healing applications. T. indica is a plant extract that possesses antidiabetic, antimicrobial, antioxidant, antimalarial and wound healing properties. T. indica leaves extract of different concentrations were blended with a tuned composition of a matrix comprised of PMMA (10 %), CA (2 %) and PEO (1.5 %), and were electrospun to form smooth, dense and continuous nanofibers as illustrated by SEM investigation. In vitro evaluation of T. indica-loaded nanofibers on normal human skin fibroblasts (HBF4) revealed a high compatibility and low cytotoxicity. T. indica-loaded nanofibers significantly increased the healing activity of scratched HBF4 cells, as compared to the free plant extract, and the healing activity was significantly enhanced upon increasing the plant extract concentration. Moreover, T. indica-loaded nanofibers demonstrated significant antimicrobial activity in vitro against the tested microbes. In vivo, nanofibers resulted in a superior wound healing efficiency compared to the control untreated animals. Hence, engineered nanofibers loaded with potent phytochemicals could be exploited as an effective biocompatible and eco-friendly antimicrobial biomaterials and wound healing composites.
Asunto(s)
Antiinfecciosos , Celulosa/análogos & derivados , Nanofibras , Tamarindus , Animales , Humanos , Polimetil Metacrilato/farmacología , Nanofibras/química , Cicatrización de Heridas , Antiinfecciosos/farmacología , Extractos Vegetales/química , Antibacterianos/farmacologíaRESUMEN
This work aims to develop plant extract-loaded electrospun nanofiber as an effective wound dressing scaffolds for topical wound healing. Electrospun nanofibers were fabricated from Syzygium cumini leaf extract (SCLE), poly(lactic-co-glycolic acid) (PLGA), poly(methyl methacrylate) (PMMA), collagen and glycine. Electrospinning conditions were optimized to allow the formation of nanosized and uniform fibers that display smooth surface. Morphology and swelling behavior of the formed nanofibers were studied. In addition, the antibacterial activity of the nanofibers against multidrug-resistant and human pathogens was assessed by agar-well diffusion. Results showed that nanofibers containing Syzygium cumini extract at concentrations of 0.5 and 1% w/v exhibited greater antibacterial activity against the tested Gram-positive (i.e., Staphylococcus aureus, Candida albicans, Candida glabrata and Bacillus cereus) and Gram-negative (i.e., Salmonella paratyphi and Escherichia coli) pathogens compared to the same concentrations of the plain extract. Furthermore, in vivo wound healing was evaluated in Wistar rats over a period of 14 days. In vivo results demonstrated that nanofiber mats containing SCLE and collagen significantly improved wound healing within two weeks, compared to the control untreated group. These findings highlight the potential of fabricated nanofibers in accelerating wound healing and management of topical acute wounds.
RESUMEN
This report provides the first description of the myco-synthesis of rod-shaped MnO NPs with an average crystallite size of ~ 35 nm, employing extracellular bioactive metabolites of endophytic Trichoderma virens strain EG92 as capping/reducing agents and MnCl2·4H2O as a parent component. The wheat bran medium was chosen to grow endophytic strain EG92, which produced a variety of bioactive metabolites in extracellular fraction, which increases the yield of MnO NPs to 9.53 g/l. The whole medium and fungal growth conditions that influenced biomass generation were optimized as successive statistical optimization approaches (Plackett-Burman and Box-Behnken designs). The production improvements were achieved at pH 5.5, WBE (35%), and inoculum size (10%), which increased Xmax to twelve-folds (89.63 g/l); thereby, Pmax increased to eight-folds (82.93 g/l). After 162 h, Xmax (145.63 g/l) and Pmax (99.52 g/l) on the side of µmax and YX/S were determined as 0.084 and 7.65, respectively. Via Taguchi experimental design, fungus-fabricated MnO NPs reaction was improved by adding 0.25 M of MnCl2·4H2O to 100% of fungal extract (reducing/capping agents) and adjusting the reaction pH adjusted to ~ 5. This reaction was incubated at 60 °C for 5 h before adding 20% fungal extract (stabilizing agent). Also, Pmax was raised 40-fold (395.36 g/l) over the BC. Our myco-synthesized MnO NPs exhibit faster and more precise antagonistic actions against phytopathogenic bacteria than fungi; they could be employed as an alternative and promised nano-bio-pesticide to manage a variety of different types of disease-pathogens in the future.
Asunto(s)
Industrias , Proyectos de Investigación , Extractos VegetalesRESUMEN
The global state of antibiotic resistance highlights the necessity for new drugs that can treat a wide range of microbial infections. Drug repurposing has several advantages, including lower costs and improved safety compared to developing a new compound. The aim of the current study is to evaluate the repurposed antimicrobial activity of Brimonidine tartrate (BT), a well-known antiglaucoma drug, and to potentiate its antimicrobial effect by using electrospun nanofibrous scaffolds. BT-loaded nanofibers were fabricated in different drug concentrations (1.5, 3, 6, and 9%) via the electrospinning technique using two biopolymers (PCL and PVP). Then, the prepared nanofibers were characterized by SEM, XRD, FTIR, swelling ratio, and in vitro drug release. Afterward, the antimicrobial activities of the prepared nanofibers were investigated in vitro using different methods against several human pathogens and compared to the free BT. The results showed that all nanofibers were prepared successfully with a smooth surface. The diameters of nanofibers were reduced after loading of BT compared to the unloaded ones. In addition, scaffolds showed controlled-drug release profiles that were maintained for more than 7 days. The in vitro antimicrobial assessments revealed good activities for all scaffolds against most of the investigated human pathogens, particularly the one prepared with 9% BT which showed superiority in the antimicrobial effect over other scaffolds. To conclude, our findings proved the capability of nanofibers in loading BT and improving its repurposed antimicrobial efficacy. Therefore, it could be a promising carrier for BT to be used in combating numerous human pathogens.
RESUMEN
Designing and synthesis of cost-effective and improved methanol permeable and proton conductive membranes are the main challenges for preparation of polymeric electrolyte membrane (PEM). Herein, a cost-effective PEM membrane based on phosphorylated polyvinyl alcohol (PVA)-grafted-cellulose acetate (CA) was prepared by a solution-casting technique. Water and methanol uptakes of phosphorylated PVA/CA membranes were characterized as function with the molar ratio of CA. Additionally, structure and morphology of phosphorylated PVA/CA (Ph-PVA/CA) membranes were verified by FT-IR analysis, SEM investigation. Furthermore, ion exchange capacity (IEC), proton conductivity and methanol permeation of Ph-PVA/CA membranes were examined based on the concentration of OPA basically. The results manifested a perceptible improvement in proton conductivity from 0.035 to 0.05 S/cm at 25 and 70 °C, respectively using 600 µL of OPA, and IEC of 2.1 meq/g using 400 µL of OPA at ambient temperature. On the other hand, methanol permeability (P = 1.08 × 10-10 cm2/s) was lower than Nafion 117 admirably. The optimum OPA concentration was 200 µL according to conductivity measurements (at 10% PVA, 150 µL GA, and CA 7%). Finally, prepared Ph-PVA/CA membranes exhibited enhancement in critical natures such as proton conductivity and IEC combined with its low-cost materials, which make them excellent candidate as PEM for DMFCs application.
RESUMEN
Biologically active phytochemicals from pumpkin reveal versatile medical applications, though little is known about their antiviral activity. The fucose-rich polysaccharide extraction conditions were optimized through Box-Behnken design and purified by column chromatography. The purified fucose-rich polysaccharide was characterized through SEM, FT-IR, 1H NMR, XRD, TGA, and GS-MS. The analysis results revealed an irregular and porous surface of the purified polysaccharide with high fucose, rhamnose, galactose, and glucose contents. The tested fucose-rich polysaccharides revealed significant antioxidant and anti-inflammatory activity at very low concentrations. The purified fucose-rich polysaccharides exerted a broad-spectrum antiviral activity against both DNA and RNA viruses, accompanied by high safety toward normal cells, where the maximum safe doses (EC100) were estimated to be about 3-3.9 mg/mL for both Vero and PBMC cell lines. Treatment of HCV, ADV7, HSV1, and HIV viruses with the purified polysaccharides showed a potent dose-dependent inhibitory activity with IC50 values of 95.475, 20.96, 5.213, and 461.75 µg/mL, respectively. This activity was hypothesized to be through inhibiting the viral entry in HCV infection and inhibiting the reverse transcriptase activity in HIV. The current study firstly reported the antioxidant, anti-inflammatory, and antiviral activities of Cucurbita maxima fucose-rich polysaccharide against several viral infections.
Asunto(s)
Cucurbita , Infecciones por VIH , Antioxidantes/farmacología , Antioxidantes/química , Cucurbita/química , Fucosa/química , Espectroscopía Infrarroja por Transformada de Fourier , Antivirales/farmacología , Leucocitos Mononucleares , Polisacáridos/farmacología , Polisacáridos/químicaRESUMEN
Modified cellulose acetate membranes with bentonite clay (CA/bent) and TiO2 nanoparticles (CA/TiO2) using the phase inversion method are successfully prepared and characterized. These Membranes are favored due to their high salt rejection properties and recyclability. The IR and EDX spectral data indicate the formation of modified membranes. The Scan Electron Microscope micrographs show that the modified membranes have smaller particle sizes with higher porosity than the neat membrane. The average pore diameter is 0.31 µm for neat cellulose acetate membrane (CA) and decreases to 0.1 µm for CA/0.05bent. All modified membranes exhibit tensile strengths and elongation percentages more than the neat membrane. The higher tensile strength and the maximum elongation% are 15.3 N/cm2 and 11.78%, respectively, for CA/0.05bent. The thermogravimetric analysis of modified membranes shows higher thermal stability than the neat membrane. The modified membranes exhibit enhanced wettability and hydrophilicity compared with cellulose acetate, by measuring the contact angle which decreases from 60° (CA) to 40° (CA/0.1bent). The ultrafiltration tests indicated that the CA/bent and CA/TiO2 are better than CA. The most efficient nanocomposite membrane is CA/0.05bent with 100% removal of (BSA) from industrial water with a flux equal to 9.5 mL/min under an applied pressure of 20 bar. Thus, this study introduces a novel ultrafiltration membrane (CA/0.05bent) that can be used effectively to completely remove bovine serum albumin from contaminated water.
RESUMEN
A series of new coumarin-N-heterocyclic hybrids, coumarin-quinolines 7a-e, coumarin-acridines 10b,c and coumarin-neocryptolepines 13b,c were synthesized and evaluated for their anticancer and antimicrobial activities. The structures of all synthesized hybrids were confirmed by FT-IR, 1H-NMR, 13C-NMR, and MS spectrometry. The anti-proliferative activity of hybrids 7a-e, 10c and 13c were bio-evaluated using MTT-assay against colon (CaCo-2), lung (A549), breast (MDA-MB-231), and hepatocellular carcinoma (HepG-2) human cancer cell lines using doxorubicin as a reference drug. The results demonstrated that, all hybrids displayed moderate to good anti-proliferative activity against the cell lines. The most active hybrids were 7a-d and 10c against CaCo-2 cancer cell line with IC50: 57.1, 52.78, 57.29, 51.95 and 56.74 µM, and selectivity index 1.38, 1.76, 2.6, 1.96 and 0.77; respectively. While, 7a,d were potent against A549 cancer cell line with IC50: 51.72, 54.8 µM and selectivity index 1.5, 0.67; respectively. Moreover, 7c showed the most potency against MDA-MB-231 cancer cell line with IC50: 50.96 µM and selectivity index 2.20. Interestingly, docking results revealed that binding energy of the current compounds showed marked affinity values ranging from -6.54 to -5.56 kcal with interactions with the reported key amino acid SER 79. Furthermore, the antimicrobial activity of the synthesized hybrids 7a-e, 10b,c, 13b and 13c were evaluated against Gram-positive and Gram-negative bacterial and fungal strains. The hybrids 10b, 13b, 10c, and 13c exhibited broad-spectrum antibacterial activity against E.coli, S. mutans, and S. aureus with MIC from 3.2 to 66 µM, this hybrids also displayed antifungal activity against C. albicans with MIC values ranging from 0.0011 to 29.5 µM. In-silico investigation of the pharmacokinetic properties indicated that tested hybrids had high GI absorption, low Blood Brain Barrier (BBB) permeability in addition to cell membrane penetrability.
Asunto(s)
Antineoplásicos , Staphylococcus aureus , Humanos , Estructura Molecular , Relación Estructura-Actividad , Células CACO-2 , Espectroscopía Infrarroja por Transformada de Fourier , Antineoplásicos/química , Antibacterianos/química , Cumarinas/química , Simulación del Acoplamiento Molecular , Ensayos de Selección de Medicamentos Antitumorales , Proliferación CelularRESUMEN
Purpose: Diabetes mellitus is among the disrupting factors of orchestrated events in wound healing. This necessitates the urge for tailored medications, which are continually offered by nano-sized materials. Herein, we present greenly synthesized copper oxide nanoparticles (CuO NPs), obtained from either Punica granatum L. (PG) or Pisidium guajava L. (GV) extract, to function as potent bactericidal and fungicidal materials that promote regeneration and healing of the targeted diabetic wounded tissues. Methods: PG or GV plant extracts were compared as source of reducing agents for CuO NPs synthesis process. The yield and photocatalytic degradation potential were compared. NPs obtained from the superior extract, PG, were characterized using particles size, zeta potential, XRD, TEM, SEM, and EDX. The antimicrobial effects were evaluated on multidrug-resistant human pathogens and then the percentage biofilm inhibitory concentration was determined. The cytotoxicity and wound scratch study were conducted on a normal human skin cell line. In-vivo wound healing activity in diabetic rats was assessed along with histopathological and immunohistochemical examination of CD45 and α-SMA. Results: The greenly synthesized CuO NPs are spherical in shape having a diameter of 233nm. CuO NPs (250µg/mL) acted as promising biocontrol agent against a variety of multidrug-resistant human pathogens. They significantly exhibited 29.460±0.811% healing of the scratched wound compared to only 2.001±0.155% for the control. Wound healing experiments revealed the safety of a low CuO NPs concentration in a diabetic animal model as well as on human normal skin fibroblast cell line. The treated group with a dose of 2mg/cm2 showed superior results with a WC50 value of 7.2 days, and 92% wound contraction after 13-days. Immunohistochemical investigation of the same group demonstrated well-established fibrous tissue (5.7±3.7/HPF), and an amplified granulation tissue of recently developed blood vessels (70±1.5/HPF). Conclusion: Green synthesized CuO NPs could overcome drug resistance and promote wound healing process effectively.
Asunto(s)
Diabetes Mellitus Experimental , Nanopartículas del Metal , Ratas , Humanos , Animales , Nanopartículas del Metal/química , Egipto , Diabetes Mellitus Experimental/tratamiento farmacológico , Ingeniería de Tejidos , Cobre/farmacología , Cobre/química , Cicatrización de Heridas , Extractos Vegetales/farmacología , Extractos Vegetales/químicaRESUMEN
Morphologic design of nanomaterials for a diversity of biomedical applications is of increasing interest. The aim of the current study is to construct therapeutic gold nanoparticles of different morphologies and investigate their effect on ocular retention and intraocular pressure in a glaucoma rabbit model. Poly(lactic-co-glycolic acid) (PLGA)-coated nanorods and nanospheres have been synthesized and loaded with carbonic anhydrase inhibitor (CAI), and characterized in vitro for their size, zeta potential and encapsulation efficiency. Nanosized PLGA-coated gold nanoparticles of both morphologies demonstrated high entrapment efficiency (Ë 98%) for the synthesized CAI and the encapsulation of the drug into the developed nanoparticles was confirmed via Fourier transform-infrared spectroscopy. In vivo studies revealed a significant reduction in intraocular pressure upon instillation of drug-loaded nanogold formulations compared to the marketed eye drops. Spherical nanogolds exhibited a superior efficacy compared to the rod-shaped counterparts, probably due to the enhanced ocular retention of spherical nanogolds within collagen fibers of the stroma, as illustrated by transmission electron microscopy imaging. Normal histological appearance was observed for the cornea and retina of the eyes treated with spherical drug-loaded nanogolds. Hence, incorporation of a molecularly-designed CAI into nanogold of tailored morphology may provide a promising strategy for management of glaucoma.
Asunto(s)
Glaucoma , Nanopartículas del Metal , Nanopartículas , Animales , Conejos , Presión Intraocular , Inhibidores de Anhidrasa Carbónica/farmacología , Copolímero de Ácido Poliláctico-Ácido Poliglicólico , Oro/uso terapéutico , Glaucoma/tratamiento farmacológico , Nanopartículas/química , Córnea , Portadores de Fármacos/química , Tamaño de la PartículaRESUMEN
Hypoxia is a distinctive feature of most solid tumors due to insufficient oxygen supply of the abnormal vasculature, which cannot work with the demands of the fast proliferation of cancer cells. One of the main obstacles to limiting the efficacy of cancer medicines is tumor hypoxia. Thus, oxygen is a vital parameter for controlling the efficacy of different types of cancer therapy, such as chemotherapy (CT), photodynamic therapy (PDT), photothermal therapy (PTT), immunotherapy (IT), and radiotherapy (RT). Numerous technologies have attracted much attention for enhancing oxygen distribution in humans and improving the efficacy of cancer treatment. Such technologies include treatment with hyperbaric oxygen therapy (HBO), delivering oxygen by polysaccharides (e.g., cellulose, gelatin, alginate, and silk) and other biocompatible synthetic polymers (e.g., PMMA, PLA, PVA, PVP and PCL), decreasing oxygen consumption, producing oxygen in situ in tumors, and using polymeric systems as oxygen carriers. Herein, this review provides an overview of the relationship between hypoxia in tumor cells and its role in the limitation of different cancer therapies alongside the numerous strategies for oxygen delivery using polysaccharides and other biomaterials as carriers and for oxygen generation.
RESUMEN
A series of carboxymethylcellulose (CMC) functionalized with glycidyl methacrylate (GMA) was successfully synthesized for producing of CMC-g-GMA copolymer. Water-soluble CMC-g-GMA copolymer was photo-crosslinked while Irgacure-2959 was used as a UV-photo-initiator at 365 nm. On the other hand, cellulose nanocrystals (CNCs) from sugarcane were graft-copolymerized in an aqueous solution utilizing cerium ammonium nitrate (CAN) as an initiator in a redox-initiated free-radical approach. CNCs were grafted with GMA to enhance their physicochemical and biological characteristics. Factors affecting hydrogel formation, e.g. CMC-g-GMA copolymer concentration, irradiation time and incorporation of different concentration of CNCs-g-GMA nano-filler, were discussed in dependance on the swelling degree and gel fraction of the produced hydrogels. Notably, the addition of CNCs-g-GMA nanofillers increased progressively thermal stability of the prepared hydrogel. CMC-g-GMA filled with CNCs-g-GMA composite hydrogel showed antimicrobial activity against multidrug resistance pathogens. Thus, CMC-g-GMA filled with CNCs-g-GMA composite hydrogel could be endorsed as compatible biomaterials for versatile biomedical applications.
Asunto(s)
Hidrogeles , Nanopartículas , Materiales Biocompatibles/química , Carboximetilcelulosa de Sodio/química , Celulosa/química , Hidrogeles/química , Nanopartículas/químicaRESUMEN
This study aims to investigate novel applications for chicken feather waste hydrolysate through a green, sustainable process. Accordingly, an enzymatically degraded chicken feather (EDCFs) product was used as a dual carbon and nitrogen source in the production medium of bacterial cellulose (BC). The yield maximization was attained through applying experimental designs where the optimal level of each significant variable was recorded and the yield rose 2 times. The produced BC was successfully characterized by FT-IR, XRD and SEM. On the other hand, sludge from EDCFs was used as a paper coating agent. The mechanical features of the coated papers were evaluated by bulk densities, maximum load, breaking length, tensile index, Young's modulus, work to break and coating layer. The results showed a decrease in tensile index and an increase in elongation at break. These indicate more flexibility of the coated paper. The coated paper exhibits higher resistance to water vapor permeability and remarkable oil resistance compared to the uncoated one. Furthermore, the effectiveness of sludge residue in removing heavy metals was evaluated, and the sorption capacities were ordered as Cu ++ > Fe ++ > Cr ++ > Co ++ with high affinity (3.29 mg/g) toward Cu ++ and low (0.42 mg/g) towards Co ++ in the tested metal solution.
Asunto(s)
Plumas , Metales Pesados , Animales , Plumas/química , Pollos , Aguas del Alcantarillado/análisis , Espectroscopía Infrarroja por Transformada de Fourier , Metales Pesados/análisis , Celulosa/metabolismoRESUMEN
The promising features of most bacterial celluloses (BC) promote the continuous mining for a cost-effective production approach toward wide and sustainable applications. Herein, cantaloupe peels (CP) were successfully implemented for sustainable BC production. Results indicated that the enzymatically hydrolyzed CP supported the maximum BC production of approximately 3.49 g/L when used as a sole fermentation media. The produced BC was fabricated with polyvinyl alcohol (PVA) and chitosan (Ch), and loaded with green synthesized copper oxide nanoparticles (CuO-NPs) to improve its biological activity. The novel composite showed an antimicrobial activity against several human pathogens such as Staphylococcus aureus, Streptococcus mutans, Salmonella typhimurium, Escherichia coli, and Pseudomonas fluorescens. Furthermore, the new composite revealed a significant in vitro anticancer activity against colon (Caco-2), hepatocellular (HepG-2), and breast (MDA) cancer cells, with low IC50 of 0.48, 0.27, and 0.33 mg/mL for the three cell lines, respectively. On the other hand, the new composite was remarkably safe for human skin fibroblast (HSF) with IC50 of 1.08 mg/mL. Interestingly, the composite membranes exhibited lethal effects against all stages of larval instar and pupal stage compared with the control. In this study, we first report the diverse potential applications of BC/PVA/Ch/CuO-NPs composites based on green synthesized CuO-NPs and sustainably produced BC membrane.