Hydroxyapatite microbeads containing BMP-2 and quercetin fabricated via electrostatic spraying to encourage bone regeneration.

BACKGROUND: Hydroxyapatite (HAp) possesses osteoconductive properties, and its granular form can serve as an effective drug delivery vehicle for bone regeneration. Quercetin (Qct), a plant-derived bioflavonoid, is known to promote bone regeneration; however, its comparative and synergistic effects with the commonly used bone morphogenetic protein-2 (BMP-2) have not been investigated. METHODS: We examined the characteristics of newly formed HAp microbeads using an electrostatic spraying method and analyzed the in vitro release pattern and osteogenic potential of ceramic granules containing Qct, BMP-2, and both. In addition, HAp microbeads were transplanted into a rat critical-sized calvarial defect and the osteogenic capacity was assessed in vivo. RESULTS: The manufactured beads had a microscale size of less than 200 µm, a narrow size distribution, and a rough surface. The alkaline phosphatase (ALP) activity of osteoblast-like cells cultured with the BMP-2-and-Qct-loaded HAp was significantly higher than that of either Qct- or BMP-2-loaded HAp groups. The mRNA levels of osteogenic marker genes such as ALP and runt-related transcription factor 2 were found to be upregulated in the HAp/BMP-2/Qct group compared to the other groups. In micro-computed tomographic analysis, the amount of newly formed bone and bone surface area within the defect was significantly higher in the HAp/BMP-2/Qct group, followed by the HAp/BMP-2 and HAp/Qct groups, which is consistent with the histomorphometrical results. CONCLUSIONS: These results imply that electrostatic spraying can be an efficient strategy to produce homogenous ceramic granules and that the BMP-2-and-Qct-loaded HAp microbeads can serve as effective implants for bone defect healing.

Neural stem/progenitor cells from adult canine cervical spinal cord have the potential to differentiate into neural lineage cells.

BACKGROUND: • Neural stem/progenitor cells (NSPCs) are multipotent self-renewing cells that can be isolated from the brain or spinal cord. As they need to be isolated from neural tissues, it is difficult to study human NSPCs. To facilitate NSPC research, we attempted to isolate NSPCs from dogs, as dogs share the environment and having many similar diseases with humans. We collected and established primary cultures of ependymal and subependymal cells from the central canal of the cervical spinal cord of adult dogs. To isolate pure NSPCs, we employed the monolayer culture and selective medium culture methods. We further tested the ability of the NSPCs to form neurospheres (using the suspension culture method) and evaluated their differentiation potential. RESULTS: • The cells had the ability to grow as cultures for up to 10 passages; the growth curves of the cells at the 3rd, 6th, and 9th passages showed similar patterns. The NSPCs were able to grow as neurospheres as well as monolayers, and immunostaining at the 3rd, 6th, and 9th passages showed that these cells expressed NSPC markers such as nestin and SOX2 (immunofluorescent staining). Monolayer cultures of NSPCs at the 3rd, 6th, and 9th passages were cultured for approximately 14 days using a differentiation medium and were observed to successfully differentiate into neural lineage and glial cells (astrocytes, neurons, and oligodendrocytes) at all the three passages tested. CONCLUSION: • It is feasible to isolate and propagate (up to at least 10 passages) canine cervical spinal cord-derived NSPCs with the capacity to differentiate into neuronal and glial cells. To the best of our knowledge this is the first study to successfully isolate, propagate, and differentiate canine NSPCs derived from cervical spinal cord in the adult canine, and we believe that these cells will contribute to the field of spinal cord regeneration in veterinary and comparative medicine.

Clinical infection of Brucella canis in a companion dog with discospondylitis in the Republic of Korea.

A 2-year-old, spayed female, Bichon Frise dog was presented with reluctance to exercise, back pain, and frequent sitting down. Multiple osteolysis, periosteal proliferation, and sclerosis of the vertebral endplates of T11-13 were observed in the radiography, computed tomography, and magnetic resonance imaging. The bacterial culture of the urine specimen, the polymerase chain reaction (PCR) of the blood, and the antibody tests were positive for Brucella canis. Accordingly, discospondylitis caused by B. canis was diagnosed and doxycycline was administered. The clinical signs resolved and the culture and PCR results were negative afterwards. Doxycycline was discontinued after 6 months. The clinical signs recurred 2 weeks later, and the combination treatment of doxycycline and enrofloxacin was initiated. Though no clinical signs were observed after 9 months and the bacterial cultures and PCR were negative, the antibody titre remained at 1 : 200 or more. The dog will continue taking antibiotics until the antibody titre drops. To the best of our knowledge, this is the first case report of a clinical infection of B. canis associated with canine discospondylitis in the Republic of Korea. Although the clinical signs of brucellosis might improve with antibiotic treatment, the disease cannot be cured due to Brucella's various strategies to evade host immune systems. Specifically, it can proliferate and replicate within the host cells, resulting in an environment that makes treatment less effective. Furthermore, owing to its zoonotic potential, owners and veterinarians should consider lifelong management or euthanasia.

Zygomatic arch reconstruction with a patient-specific polycaprolactone/beta-tricalcium phosphate scaffold after parosteal osteosarcoma resection in a dog.

OBJECTIVE: To describe the surgical application of a 3D-printing-based, patient-specific, biocompatible polycaprolactone/beta-tricalcium phosphate (PCL/ß-TCP) scaffold to reconstruct the zygomatic arch after tumor resection in a dog. ANIMAL: A 13 year old female spayed Maltese. STUDY DESIGN: Case report METHODS: The dog's presenting complaint was swelling ventral to her right eye. A round mass arising from the caudal aspect of the right zygomatic arch was identified by computed tomography (CT). The histopathologic diagnosis was a low-grade spindle-cell tumor. Surgical resection was planned to achieve 5 mm margins. A patient-specific osteotomy guide and polycaprolactone/beta-tricalcium phosphate (PCL/ß-TCP) scaffold were produced. Osteotomy, including 30% of total zygomatic arch length, was performed using an oscillating saw aligned with the guide. The scaffold was placed in the defect. Parosteal osteosarcoma was diagnosed based on histopathological examination. Excision was complete, with the closest margin measuring 0.3 mm. RESULTS: Mild epiphora, due to surgical site swelling, subsided after 20 days. Tissue formation within and around the porous scaffold was noted on CT 10 months postoperatively, with no evidence of metastasis or local recurrence. Facial conformation appeared symmetrical, and no complications were noted 16 months postoperatively. CONCLUSION: The use of a 3D-printing-based, patient-specific, biocompatible PCL/ß-TCP scaffold successfully restored the structure and function of the zygomatic arch without complications, even following wide zygomectomy for complete tumor removal.

Evaluation of Auricular Cartilage Reconstruction Using a 3-Dimensional Printed Biodegradable Scaffold and Autogenous Minced Auricular Cartilage.

Auricular cartilage reconstruction represents one of the greatest challenges for otolaryngology-head and neck surgery. The native structure and composition of the auricular cartilage can be achieved by combining a suitable chondrogenic cell source with an appropriate scaffold. In reconstructive surgery for cartilage tissue, autogenous cartilage is considered to be the best chondrogenic cell source. Polycaprolactone is mainly used as a tissue-engineered scaffold owing to its mechanical properties, miscibility with a large range of other polymers, and biodegradability. In this study, scaffolds with or without autogenous minced auricular cartilage were implanted bilaterally in rabbits for auricular regeneration. Six weeks (n = 4) and 16 weeks (n = 4) after implantation, real-time quantitative reverse transcription polymerase chain reaction and histology were used to assess the regeneration of the auricular cartilage. Quantitative reverse transcription polymerase chain reaction analysis revealed that the messenger RNA expression of aggrecan, collagen I, and collagen II was higher in scaffolds with 50% minced cartilage than the scaffold-only groups or scaffolds with 30% minced cartilage (P < 0.05). Furthermore, histological analysis demonstrated significantly superior cartilage regeneration in scaffolds with the minced cartilage group compared with the scaffold-only and control groups (P < 0.05). Autogenous cartilage can be easily obtained and loaded onto a scaffold to promote the presence of chondrogenic cells, allowing for an improvement of the reconstruction of auricular cartilage. Here, the regeneration of auricular cartilage was also successful in the 50% minced cartilage group. The results presented in this study could have clinical implications, as they demonstrate the potential of a 1-stage process for auricular reconstruction.

Enhanced Skull Bone Regeneration by Sustained Release of BMP-2 in Interpenetrating Composite Hydrogels.

Direct administration of bone morphogenetic protein-2 (BMP-2) for bone regeneration could cause various clinical side effects such as osteoclast activation, inflammation, adipogenesis, and bone cyst formation. In this study, thiolated gelatin/poly(ethylene glycol) diacrylate (PEGDA) interpenetrating (IPN) composite hydrogels were developed for guided skull bone regeneration. To promote bone regeneration, either polycation-based coacervates (Coa) or gelatin microparticles (GMPs) were incorporated within IPN gels as BMP-2 carriers. Both BMP-2 loaded Coa and BMP-2 loaded GMPs showed significantly enhanced in vitro alkaline phosphate (ALP) activity of human mesenchymal stem cells (hMSCs) than non-BMP-2 treated control. Moreover, BMP-2 loaded GMPs group exhibited statistically increased ALP activity compared to both bolus BMP-2 administration and BMP-2 loaded Coa group, indicating that our carriers could protect and maintain biological activity of cargo BMP-2. Sustained release kinetics of BMP-2 from IPN composite hydrogels could be controlled by different formulations. For in vivo bone regeneration, various IPN gel formulations (i.e., (1) control, (2) only hydrogel, (3) hydrogel with bolus BMP-2, (4) hydrogel with BMP-2-loaded Coa, and (5) hydrogel with BMP-2-loaded GMPs) were bilaterally implanted into 5 mm-sized rat calvarial defects. After 4 weeks, micro-CT and histological analysis were performed to evaluate new bone formation. Significantly higher scores for bony bridging and union were observed in BMP-2-loaded Coa and BMP-2-loaded GMP groups as compared to other formulations. In addition, rats treated with BMP-2-loaded GMPs showed a significantly higher ratio of bone volume/total volume and lower trabecular separation scores than others. Finally, rats treated with either Coa or GMP groups exhibited a significant increase in bone formation area, as assessed via histomorphometric analysis. Taken together, it could be concluded that Coa and GMPs were effective carriers to maintain the bioactivity of cargo BMP-2 during its sustained release. Consequently, our IPN composite hydrogel system that combines such BMP-2 carriers could effectively promote skull bone regeneration.

Evaluation of Mesenchymal Stem Cell Sheets Overexpressing BMP-7 in Canine Critical-Sized Bone Defects.

The aim of this study was to investigate the in vitro osteogenic capacity of bone morphogenetic protein 7 (BMP-7) overexpressing adipose-derived (Ad-) mesenchymal stem cells (MSCs) sheets (BMP-7-CS). In addition, BMP-7-CS were transplanted into critical-sized bone defects and osteogenesis was assessed. BMP-7 gene expressing lentivirus particles were transduced into Ad-MSCs. BMP-7, at the mRNA and protein level, was up-regulated in BMP-7-MSCs compared to expression in Ad-MSCs. Osteogenic and vascular-related gene expressions were up-regulated in BMP-7-CS compared to Ad-MSCs and Ad-MSC sheets. In a segmental bone-defect model, newly formed bone and neovascularization were enhanced with BMP-7-CS, or with a combination of BMP-7-CS and demineralized bone matrix (DBM), compared to those in control groups. These results demonstrate that lentiviral-mediated gene transfer of BMP-7 into Ad-MSCs allows for stable BMP-7 production. BMP-7-CS displayed higher osteogenic capacity than Ad-MSCs and Ad-MSC sheets. In addition, BMP-7-CS combined with demineralized bone matrix (DBM) stimulated new bone and blood vessel formation in a canine critical-sized bone defect. The BMP-7-CS not only provides BMP-7 producing MSCs but also produce osteogenic and vascular trophic factors. Thus, BMP-7-CS and DBM have therapeutic potential for the treatment of critical-sized bone defects and could be used to further enhance clinical outcomes during bone-defect treatment.

Optimisation of a double-centrifugation method for preparation of canine platelet-rich plasma.

BACKGROUND: Platelet-rich plasma (PRP) has been expected for regenerative medicine because of its growth factors. However, there is considerable variability in the recovery and yield of platelets and the concentration of growth factors in PRP preparations. The aim of this study was to identify optimal relative centrifugal force and spin time for the preparation of PRP from canine blood using a double-centrifugation tube method. METHODS: Whole blood samples were collected in citrate blood collection tubes from 12 healthy beagles. For the first centrifugation step, 10 different run conditions were compared to determine which condition produced optimal recovery of platelets. Once the optimal condition was identified, platelet-containing plasma prepared using that condition was subjected to a second centrifugation to pellet platelets. For the second centrifugation, 12 different run conditions were compared to identify the centrifugal force and spin time to produce maximal pellet recovery and concentration increase. Growth factor levels were estimated by using ELISA to measure platelet-derived growth factor-BB (PDGF-BB) concentrations in optimised CaCl2-activated platelet fractions. RESULTS: The highest platelet recovery rate and yield were obtained by first centrifuging whole blood at 1000 g for 5 min and then centrifuging the recovered platelet-enriched plasma at 1500 g for 15 min. This protocol recovered 80% of platelets from whole blood and increased platelet concentration six-fold and produced the highest concentration of PDGF-BB in activated fractions. CONCLUSIONS: We have described an optimised double-centrifugation tube method for the preparation of PRP from canine blood. This optimised method does not require particularly expensive equipment or high technical ability and can readily be carried out in a veterinary clinical setting.

Corneal plaque containing levofloxacin in a dog.

A 13-year-old castrated male Yorkshire terrier developed a corneal ulcer 2 weeks after intracapsular lens extraction (ICLE) in the right eye. The corneal ulcer was treated with levofloxacin eye drops. A plaque with a white luster developed in the central cornea 2 weeks after treatment with levofloxacin eye drops. The corneal plaque was surgically removed under inhalant anesthesia. The corneal plaque displayed antimicrobial activity against Escherichia coli. Furthermore, levofloxacin content in the plaque was confirmed by matrix-assisted laser desorption/ionization time-of-flight/time-of-flight (MALDI-TOF/TOF) mass spectrometry (MS). The corneal ulcer completely resolved 2 weeks after the surgical removal of the corneal lesion and replacement of levofloxacin eye drops with tobramycin eye drops. Although the topical use of levofloxacin is unlikely to lead to corneal chemical deposits due to the high water solubility of the drug compared to other topical fluoroquinolones, this patient developed corneal plaque of the antibiotic drop.

Transplantation of Heat-Shock Preconditioned Neural Stem/Progenitor Cells Combined with RGD-Functionalised Hydrogel Promotes Spinal Cord Functional Recovery in a Rat Hemi-Transection Model.

BACKGROUND: Neural stem/progenitor cell (NSPC) transplantation in spinal cord injury (SCI) is a potential treatment that supports regeneration by promoting neuroprotection, remyelination, and neurite outgrowth. However, glial scarring hinders neuroregeneration and reduces the efficiency of cell transplantation. The present study aimed to enhance this neuroregeneration by surgically removing the glial scar and transplanting heat-shock (HS) preconditioned NSPCs in combination with Arg-Gly-Asp (RGD)-functionalised hydrogel in a rat spinal cord hemi-transection model. METHODS: Twelve Sprague-Dawley rats underwent spinal cord hemi-transection and were randomly divided into three treatment groups: hydrogel implantation (control group), NSPC-encapsulated hydrogel implantation, and HS-NSPC-encapsulated hydrogel implantation. HS preconditioning was applied to the NSPCs to reinforce cell retention and an RGD-functionalised hydrogel was used as a biomatrix. RESULTS: In vitro culture showed that preconditioned NSPCs highly differentiated into neurons and oligodendrocytes and exhibited higher proliferation and neurite outgrowth in hydrogels. Rats in the HS-NSPC-encapsulated hydrogel implantation group showed significantly improved functional recovery, neuronal and oligodendrocyte differentiation of transplanted cells, remyelination, and low fibrotic scar formation. CONCLUSIONS: The surgical removal of the glial scar in combination with HS-preconditioning and RGD-functionalised hydrogels should be considered as a new paradigm in NSPC transplantation for spinal cord regeneration treatment.

Surgical Reconstruction of Canine Nonunion Fractures Using Bone Morphogenetic Protein-2-loaded Alginate Microbeads and Bone Allografts.

BACKGROUND/AIM: Effective treatment of nonunion fractures is challenging as it requires a biological and mechanical environment to promote sufficient osteogenesis. Herein, we present a case series in which we evaluated the clinical efficacy of bone morphogenetic protein-2 (BMP-2)-loaded alginate microbeads and allografts in two dogs with nonunion fractures. CASE REPORT: A 3-year-old, 2.3-kg, spayed female Pomeranian (Case 1) presented with intermittent lameness of the left forelimb after radial and ulnar fracture repair 8 weeks prior. A 4-year-old, 4.8-kg, spayed female Pomeranian (Case 2) was referred for non-weight-bearing lameness of the left hindlimb due to implant failure following left tibial fracture repair. Both dogs had atrophic bone ends and no bridging calluses at the fracture site on radiographs, and were diagnosed with nonviable nonunion fractures of the radius/ulna and tibia, respectively. The surgical approach involved implant removal, debridement, and fracture gap reconstruction. BMP-2 was loaded into alginate microbeads for a prolonged release with bone allograft chips in both cases. In Case 1, bead grafts were applied directly at the fracture site, while in Case 2, they were implanted inside a frozen cortical bone allograft as a scaffold to fill the large gap. Postoperative radiography revealed excessive callus formation, early radiographic bone union, and cortical bone remodeling, in line with improved lameness scores. At the final follow-up, gait was improved and the desired bone length and shape were achieved in both cases. CONCLUSION: Simultaneous use of osteoinductive BMP-2 alginate microbeads and osteoconductive bone allografts yielded functionally and structurally favorable outcomes in canine nonunion fractures, without major complications.

Application of collagen matrix (DuraGen®) to reduce subcutaneous emphysema in canine dorsal rhinotomy.

This retrospective case study aimed to evaluate the efficacy of collagen matrix (DuraGen®) in preventing subcutaneous emphysema, a common complication following dorsal rhinotomy. Six client-owned dogs diagnosed with nasal masses using computed tomography were included in this study. Dorsal rhinotomy was performed, and a collagen matrix was used to seal bone defects before fixation of the nasal bone flap. Following collagen matrix application, all dogs recovered without notable complications. These findings suggest that the collagen matrix is a reliable and safe intervention for mitigating subcutaneous emphysema after dorsal rhinotomy.

Cervical spine reconstruction after total vertebrectomy using customized three-dimensional-printed implants in dogs.

BACKGROUND: Sufficient surgical resection is necessary for effective tumor control, but is usually limited for vertebral tumors, especially in the cervical spine in small animal neurosurgery. OBJECTIVE: To evaluate the primary stability and safety of customized three-dimensional (3D)-printed implants for cervical spine reconstruction after total vertebrectomy. METHODS: Customized guides and implants were designed based on computed tomography (CT) imaging of five beagle cadavers and were 3D-printed. They were used to reconstruct C5 after total vertebrectomy. Postoperative CT images were obtained to evaluate the safety and accuracy of screw positioning. After harvesting 10 vertebral specimens (C3-C7) from intact (group A) and implanted spines (group B), implant stability was analyzed using a 4-point bending test comparing with groups A and C (reconstituted with plate and pins/polymethylmethacrylate after testing in Group A). RESULTS: All customized implants were applied without gross neurovascular damage. In addition, 90% of the screws were in a safe area, with 7.5% in grade 1 (< 1.3 mm) and 2.5% in grade 2 (> 1.3 mm). The mean entry point and angular deviations were 0.81 ± 0.43 mm and 6.50 ± 5.11°, respectively. Groups B and C significantly decreased the range of motion (ROM) in C3-C7 compared with intact spines (p = 0.033, and 0.018). Both groups reduced overall ROM and neutral zone in C4-C6, but only group B showed significance (p = 0.005, and 0.027). CONCLUSION: Customized 3D-printed implants could safely and accurately replace a cervical vertebra in dog cadavers while providing primary stability.

Medial patellar luxation induces cartilage erosion in dogs: a retrospective study of prevalence and risk factors.

OBJECTIVE: To explain the relationship between cartilage erosion and medial patellar luxation (MPL) and to identify risk factors in dogs. METHODS: A retrospective review was conducted on 90 dogs (103 stifles) surgically treated for MPL between January 2006 and March 2024. Data collected included signalment, side of operated stifle, patellar luxation grade, symptom duration, and lameness score. Cartilage erosion was evaluated for extent and location on the patella and femoral trochlea. Statistical analyses were conducted to identify risk factors. RESULTS: The prevalence of cartilage erosion of the patella and femoral trochlea was 47.6% (49/103) and 54.4% (56/103), respectively, increasing with a higher grade of patellar luxation. Lesions were most prevalent in the distolateral patella and proximomedial trochlea, with generalized lesions more prevalent in grade IV. The extent of both lesions was significantly associated with age, patellar luxation grade, and symptom duration, while body weight significantly correlated only with the cartilage erosion of the patella. No significant correlation was observed with sex, side of operated stifle, or lameness score. CONCLUSIONS: Many patients with MPL exhibited cartilage erosion in the patellofemoral joint, likely due to biomechanical mechanisms. Surgery can be indicated for patients with MPL, as it may prevent cartilage erosion while improving patellofemoral alignment and gait. When selecting surgical candidates, it is important to consider risk factors, such as patellar luxation grade, body weight, age, and symptom duration. CLINICAL RELEVANCE: Early surgical treatment is recommended, especially for dogs with higher body weight and higher grade of MPL, to prevent cartilage erosion and secondary osteoarthritis.

Atlantoaxial joint stabilization using patient-specific 3-D-printed drill guides and 3-D-printed titanium plates or polymethyl methacrylate is effective in toy-breed dogs.

OBJECTIVE: To report the clinical outcomes in toy-breed dogs with atlantoaxial instability (AAI) stabilized with patient-specific 3-D-printed titanium plates or polymethyl methacrylate (PMMA), both with the assistance of 3-D-printed drill guides. ANIMALS: 15 client-owned dogs undergoing surgical treatment for AAI between January 1, 2020, and October 31, 2022. METHODS: The clinical characteristics, diagnostic images, and neurological outcomes of 15 dogs treated for AAI using 3-D-printing technology were reviewed. Postoperative CT images were examined to evaluate the screw placement accuracy in the atlas and axis. Clinical outcomes, including postoperative neurological improvement and screw loosening, were evaluated in dogs treated with a patient-specific titanium plate and those treated with PMMA. RESULTS: Patient-specific titanium plates (7 dogs) and PMMA (8 dogs) were used for AAI stabilization. The mean follow-up period was 15.2 months (range 7 to 22 months). A reduction of the axis without vertebral canal violation was confirmed on postoperative CT in 14 dogs. The mean deviation from the preoperative planning ranged from 0.30 to 1.27 mm at the insertion and exit points of 84 screws using this method. The neurological grade had improved in each dog postoperatively and at the final follow-up. Screw loosening was noted in 4 dogs in the titanium plates groups without neurological deterioration. CLINICAL RELEVANCE: Patient-specific 3-D-printed drill guides and titanium plates or PMMA are effective for AAI stabilization in toy-breed dogs, providing accurate guidance.

Pilot study on the feasibility of shape memory alloy implantation for Vancouver type B1 periprosthetic femoral fractures in a canine model: a step toward advancing treatment modalities.

BACKGROUND: Cerclage wiring is commonly used for treating fractures; however, it has several limitations, including mechanical weakness, decreased blood circulation, and technical complexity. In this study, we developed an implant using a shape memory alloy (SMA) and tested its efficacy in treating Vancouver type B1 (VB1) periprosthetic femoral fractures (PFFs) in a canine model. METHODS: The mid-diaphyseal fracture models underwent reduction via the SMA plate (SMA group) or the cerclage cable plate (cable group) method in randomly selected pelvic limbs. An intraoperative evaluation was conducted to assess the surgical time and difficulty related to implant fitting. Clinical assessments, radiography, microcomputed tomography (micro-CT), histological analysis, positron emission tomography (PET)/CT, and galvanic corrosion analysis were conducted for 52 weeks to evaluate bone healing and blood perfusion. RESULTS: The results for bone healing and blood perfusion were not significantly different between the groups (p > 0.05). In addition, no evidence of galvanic corrosion was present in any of the implants. However, the median surgical time was 75 min (range, 53-82 min) for the SMA group and 126 min (range, 120-171 min) for the cable group, which was a statistically significant difference (p = 0.0286). CONCLUSIONS: This study assessed the ability of a newly developed shape memory alloy (SMA) to treat VB1 periprosthetic femoral fractures (PFFs) in canines for over a 52-week period and revealed outcomes comparable to those of traditional methods in terms of bone healing and mechanical stability. Despite the lower surgical complexity and potential time-saving benefits of this treatment, further research is needed to confirm its efficacy.

Sustained release of stem cell secretome from nano-villi chitosan microspheres for effective treatment of atopic dermatitis.

Canine atopic dermatitis (AD) arises from hypersensitive immune reactions. AD symptoms entail severe pruritus and skin inflammation, with frequent relapses. Consequently, AD patients require continuous management, imposing financial burdens and mental fatigue on pet owners. In this study, we aimed to investigate the therapeutic relevance of secretome from canine adipose tissue-derived mesenchymal stem cells (MSCs), especially after encapsulation in nano-villi chitosan microspheres (CS-MS) to expect improved efficacy. Conditioned media (CM) from MSCs significantly inhibited the proliferation of splenocytes, induced the generation of regulatory T cells, and decreased mast cell degranulation. We found that beneficial soluble factors known to reduce AD symptoms, including transforming growth factor-beta 1, were detectable after sequential concentration and lyophilization of CM. The CS-MS, developed by a phase inversion regeneration method, showed high loading and sustained release of the secretome. Local injection of secretome-loaded CS-MS (ST/SC-MS) effectively reduced clinical severity compared to groups treated with secretome. Histological analysis revealed that ST/SC-MS potently suppressed epidermal hyperplasia, immunocyte infiltration and mast cell activation in the lesion. Taken together, this study presents a novel therapeutic approach exhibiting more potent and prolonged immunoregulatory efficacy of MSC secretome for canine AD treatment.

Insertional biceps tendinopathy palliated successfully with intra-articular triamcinolone acetonide injection in a dog: A case report.

This report describes a dog diagnosed with insertional biceps tendinopathy that was palliated with intra-articular triamcinolone acetonide injections. The patient was a 6-year-old spayed female Chihuahua dog that had left thoracic limb lameness for 3 months before presentation. On physical examination, moderate pain was elicited by performing the biceps test and isolated full elbow extension on the left thoracic limb. Gait analysis showed asymmetrical peak vertical force and vertical impulse between thoracic limbs. Computed tomography (CT) revealed enthesophyte formation on the ulnar tuberosity of the left elbow joint. Ultrasonography showed a heterogeneous fibre pattern at the biceps tendon insertion site on the left elbow joint. These findings confirmed insertional biceps tendinopathy based on physical examination, CT and ultrasonography results. The dog received an intra-articular triamcinolone acetonide injection with hyaluronic acid in the left elbow joint. Clinical signs improved after the first injection, including a range of motion, pain and gait. A second injection was given in the same manner because of recurring mild lameness 3 months later. No clinical signs were observed during the follow-up period.

A shape memory alloy implant can be an effective surgical treatment in the atlantoaxial joint stabilization using rabbits as substitutes for toy-breed dogs.

OBJECTIVE: To investigate the feasibility of using shape memory alloy (SMA) implants for atlantoaxial joint stabilization using a rabbit model as a substitute for canines. ANIMALS: 20 rabbit cadavers. METHODS: We prepared rabbit cadavers from the middle of the skull to the third cervical vertebra. The vertebral body and canal sizes of the atlas and axis were compared using CT data from rabbits, normal dogs, and dogs with atlantoaxial instability (AAI) to assess the feasibility of using rabbits as substitutes for toy-breed dogs. The shape memory alloy (SMA) implants were designed to stabilize the atlantoaxial joint without compromising the spinal canal passage for safety and were classified into SMA-1 and SMA-2 based on their design. To evaluate the strength, the ventrodorsal force was measured with atlantoaxial ligaments intact, after removing the ligaments, and after applying conventional wire or SMA implants to stabilize the atlantoaxial joint. The time taken for implant application was measured. RESULTS: No significant difference in vertebral body size of the atlas and axis was observed. A significant difference in vertebral canal size was observed between the animals. In biomechanical testing, the SMA-2 implant provided more stabilization, while the SMA-1 implant had lower strength than the conventional method using wires. The application time of wire was the longest, while that of SMA-1 was the shortest. CLINICAL RELEVANCE: SMA implants provide comparable strength and demonstrate superior efficacy compared to conventional dorsal wire fixation of atlantoaxial stabilization. Therefore, SMA implants can be an effective surgical option for AAI.

Cell-directed assembly of luminal nanofibril fillers in nerve conduits for peripheral nerve repair.

Graphene and its derivatives, graphene oxide (GO) and reduced graphene oxide (rGO), have attracted significant attention in the field of tissue engineering, particularly in nerve and muscle regeneration, owing to their excellent electrical conductivity. This paper reports the fabrication of cell-mixable rGO-decorated polycaprolactone (PCL) nanofibrils (NFs) to promote peripheral nerve repair with the assistant of electron transmission by rGO and cytokine paracrine by stem cells. Oxidized GO (GO-COOH) and branched polyethylenimine are layer-by-layer coated on hydrolyzed PCL NFs via electrostatic interaction, and the number of layering is manipulated to adjust the GO-COOH coating amount. The decorated GO-COOH is reduced in situ to rGO for electrical conductivity retrieval. PC12 cells cultivated with rGO-coated NF demonstrate spontaneous cell sheet assembly, and neurogenic differentiation is observed upon electrical stimulation. When transplant nerve guidance conduit containing the assembly of rGO-coated NF and adipose-derived stem cell to the site of neurotmesis injury of a sciatic nerve, animal movement is enhanced and autotomy is ameliorated for 8 weeks compared to transplanting the hollow conduit only. Histological analysis results reveal higher levels of muscle mass and lower levels of collagen deposition in the triceps surae muscle of the rGO-coated NF-treated legs. Therefore, the rGO-layered NF can be tailored to repair peripheral nerve injuries in combination with stem cell therapy.