Impact of Molybdenum Dichalcogenides on the Active and Hole-Transport Layers for Perovskite Solar Cells, X-Ray Detectors, and Photodetectors.

The interface architectures of inorganic-organic halide perovskite-based devices play key roles in achieving high performances with these devices. Indeed, the perovskite layer is essential for synergistic interactions with the other practical modules of these devices, such as the hole-/electron-transfer layers. In this work, a heterostructure geometry comprising transition-metal dichalcogenides (TMDs) of molybdenum dichalcogenides (MoX2  = MoS2 , MoSe2 , and MoTe2 ) and perovskite- or hole-transfer layers is prepared to achieve improved device characteristics of perovskite solar cells (PSCs), X-ray detectors, and photodetectors. A superior efficiency of 11.36% is realized for the active layer with MoTe2 in the PSC device. Moreover, X-ray detectors using modulated MoTe2 nanostructures in the active layers achieve 296 nA cm-2 , 3.12 mA (Gy cm2 )-1 and 3.32 × 10-4 cm2 V-1 s-1 of collected current density, sensitivity, and mobility, respectively. The fabricated photodetector produces a high photoresponsivity of 956 mA W-1 for a visible light source, with an excellent external quantum efficiency of 160% for the perovskite layer containing MoSe2 nanostructures. Density functional theory calculations are made for pure and MoX2 doped perovskites' geometrical, density of states and optical properties variations evidently. Thus, the present study paves the way for using perovskite-based devices modified by TMDs to develop highly efficient semiconductor devices.

Sensitivity improvement of hybrid active layer containing 2D nanoplatelets for indirect x-ray detector.

In this paper, we attempted to improve the detection sensitivity of an indirect x-ray detector through using a hybrid active layer composed of a poly [N-90-heptadecanyl-2,7-carbazole-alt-5,5-(40,70-di-2-thienyl-20,10,30-benzothiadiazole)] (PCDTBT) organic semiconductor and cadmium selenide nanoplatelets (CdSe NPLs) colloidal inorganic semiconductors. First, different blending ratio in the active layer (i.e. 2:1, 1:1, 1:2 and 1:3) of PCDTBT:CdSe NPL were examined, a sensitivity of 89.5µC·Gyair-1·cm-2was achieved using a 1:1 ratio due to the low series resistance (RS) and defect density in this configuration. Then, the oleic acid (OA) that was initially applied in the CdSe NPL surface was replaced with pyridine ligands, this was done because the pyridine ligand is a short-chain ligand that can help charge transfer by reducing the distance between NPLs in the active layer. In addition, an experiment was conducted to determine the optimal ligand exchange time. A detector with an PCDTBT:CdSe NPL active layer fabricated using pyridine ligand exchange achieved a sensitivity of 219.8µC·Gyair-1·cm-2after an exchange time of 12 h, this is an improvement of 155% compared to the detector using a PCDTBT:CdSe NPL with the original OA ligands. Lastly, the optimal thickness for the PCDTBT:CdSe NPL active layer was investigated. The highest mobility of 7.60 × 10- 6cm2/V·s was recorded after fabricating the layer using spin-coating at 1900 rpm, the highest sensitivity of 314.0µC·Gyair-1·cm-2was also achieved under these conditions. Compared to the initial state of the detector, our modifications improved the sensitivity of the PCDTBT:CdSe NPL detector by 251%.

Characteristics of a Hybrid Detector Combined with a Perovskite Active Layer for Indirect X-ray Detection.

In this study, we investigated the characteristics of an organic-inorganic hybrid indirect-type X-ray detector with a CH3NH3PbI3 (MAPbI3) perovskite active layer. A layer with a thickness of 192 nm annealed at 100 °C showed higher absorption, higher crystallinity, and lower surface roughness than did perovskite layers made under different conditions. In the indirect X-ray detector, a scintillator coupled with the detector to convert X-ray photons to visible photons, and the converted photons were absorbed by the active layer to generate charge carriers. The detector with the optimized MAPbI3 (192 nm thick and 100 °C annealing condition) active layer was coupled with a CsI(Tl) scintillator which consisted of 400 µm thick CsI and 0.5 mm thick Al, and achieved the highest sensitivity, i.e., 2.84 mA/Gy·cm2. In addition, the highest short-circuit current density (JSC), i.e., 18.78 mA/cm2, and the highest mobility, i.e., 2.83 × 10-4 cm2/V·s, were obtained from the same detector without the CsI(Tl) scintillator.

A Study on an Organic Semiconductor-Based Indirect X-ray Detector with Cd-Free QDs for Sensitivity Improvement.

In this paper, we studied the optimized conditions for adding inorganic quantum dots (QD) to the P3HT:PC70BM organic active layer to increase the sensitivity of the indirect X-ray detector. Commonly used QDs are composed of hazardous substances with environmental problems, so indium phosphide (InP) QDs were selected as the electron acceptor in this experiment. Among the three different sizes of InP QDs (4, 8, and 12 nm in diameter), the detector with 4 nm InP QDs showed the highest sensitivity, of 2.01 mA/Gy·cm2. To further improve the sensitivity, the QDs were fixed to 4 nm in diameter and then the amount of QDs added to the organic active layer was changed from 0 to 5 mg. The highest sensitivity, of 2.26 mA/Gy·cm2, was obtained from the detector with a P3HT:PC70BM:InP QDs (1 mg) active layer. In addition, the highest mobility, of 1.69 × 10-5 cm2/V·s, was obtained from the same detector. Compared to the detector with the pristine P3HT:PC70BM active layer, the detector with a P3HT:PC70BM:InP QDs (1 mg) active layer had sensitivity that was 61.87% higher. The cut-off frequency of the P3HT:PC70BM detector was 21.54 kHz, and that of the P3HT:PC70BM:InP QDs (1 mg) detector was 26.33 kHz, which was improved by 22.24%.

A randomized phase l pharmacokinetic study comparing SB4 and etanercept reference product (Enbrel®) in healthy subjects.

AIMS: SB4 has been developed as a biosimilar of etanercept. The primary objective of the present study was to demonstrate the pharmacokinetic (PK) equivalence between SB4 and European Union -sourced etanercept (EU-ETN), SB4 and United States-sourced etanercept (US-ETN), and EU-ETN and US-ETN. The safety and immunogenicity were also compared between the treatments. METHODS: This was a single-blind, three-part, crossover study in 138 healthy male subjects. In each part, 46 subjects were randomized at a 1:1 ratio to receive a single 50 mg subcutaneous dose of the treatments (part A: SB4 or EU-ETN; part B: SB4 or US-ETN; and part C: EU-ETN or US-ETN) in period 1, followed by the crossover treatment in period 2 according to their assigned sequences. PK equivalence between the treatments was determined using the standard equivalence margin of 80-125%. RESULTS: The geometric least squares means ratios of AUCinf , AUClast and Cmax were 99.04%, 98.62% and 103.71% (part A: SB4 vs. EU-ETN); 101.09%, 100.96% and 104.36% (part B: SB4 vs. US-ETN); and 100.51%, 101.27% and 103.29% (part C: EU-ETN vs. US-ETN), respectively, and the corresponding 90% confidence intervals were completely contained within the limits of 80-125 %. The incidence of treatment-emergent adverse events was comparable, and the incidence of the antidrug antibodies was lower in SB4 compared with the reference products. CONCLUSIONS: The present study demonstrated PK equivalence between SB4 and EU-ETN, SB4 and US-ETN, and EU-ETN and US-ETN in healthy male subjects. SB4 was well tolerated, with a lower immunogenicity profile and similar safety profile compared with those of the reference products.

The standardized BHH10 extract, a combination of Astragalus membranaceus, Cinnamomum cassia, and Phellodendron amurense, reverses bone mass and metabolism in a rat model of postmenopausal osteoporosis.

Jasin-hwan-gagambang (BHH10), a modified prescription of Jasin-hwan, contains Astragalus membranaceus, Cinnamomum cassia, and Phellodendron amurense, and it has been traditionally used to treat osteoporosis and other inflammatory diseases. In this study, we systematically investigated the protective effects of BHH10 in ovariectomy (OVX)-induced rats. Sprague-Dawley rats were randomly divided into sham and OVX subgroups. The rats in the OVX group were treated with vehicle, BHH10, alendronate (ALN), and 17ß-estradiol (E2). BHH10 treatment significantly inhibited OVX-induced increases in body weight and uterus atrophy. In addition, it significantly increased the bone mineral density (BMD) and prevented a decrease in trabecular bone volume, connectivity density, trabecular number, thickness, and separation at the total femur and femur neck. The OVX rats showed significant decreases in the serum levels of calcium and phosphorous and significant increases in the serum levels of cholesterol, low-density lipoprotein cholesterol, alkaline phosphatase, osteocalcin, C-telopeptide type 1 collagen, and bone morphogenetic protein-2. These changes were significantly reduced to near sham levels by administration of BHH10 to OVX rats. BHH10-treated rats had a greater bone mass, a better structural architecture of the bone, and higher levels of biochemical markers of the bone than did the ALN-treated or E2-treated rats. These results suggest that BHH10 reverses osteoporosis in OVX rats by stimulating bone formation or regulating bone resorption and is not associated with toxicity.

Metal oxide-embedded carbon-based materials for polymer solar cells and X-ray detectors.

This study examines the effects of hybrid nanoparticles made of NiO@rGO (reduced graphene oxide) and NiO@CNT (carbon nanotubes) on PCDTBT and PCBM active layers in glass/ITO/HTL/active-layer/LiF/Al structured bulk heterojunction (BHJ) polymer solar cells (PSCs) and X-ray photodetectors. These hybrid nanoparticles were used to create BHJ solar cells and photodetectors, and microscopic research was conducted to determine how they affect the structure of the devices. The findings show that compared to conventional matrices, the active layers with NiO@rGO and NiO@CNT incorporation have increased the charge carrier capacities and exciton dissociation properties. In order to assess their impact on the characteristics of charge transport, various weight ratios of these hybrid nanoparticles dispersed in polymer junctions are being investigated. Notably, compared to the pure PCDTBT:PCBM active layer (power conversion efficiency (PCE) = 4.35%), the NiO@CNT device has the highest PCE = 6.42% which, among the tested configurations, demonstrates its superior performance in converting sunlight into electricity. Among the tested X-ray detector materials, "NiO@CNT" achieves the best performance with a sensitivity of 1.92 mA Gy-1 cm-2. Through improved interfacial behaviors and effective charge transport, this work highlights the potential of these cutting-edge hybrid nanoparticles to enhance the performance of organic electronic devices.

Tuning of electron transport layers using MXene/metal-oxide nanocomposites for perovskite solar cells and X-ray detectors.

This work elaborates on the decoration of metal oxides (ZnO and Fe3O4) between MXene sheets for use as the supporting geometry of PCBM electron transport layers (ETLs) in perovskite solar cells and X-ray detectors. The metal oxide supports for carrying the plentiful charge carriers and the hydrophobic nature of MXenes provide an easy charge transfer path through their flakes and a smooth surface for the ETL. The developed interface engineering based on the MXene/ZnO and MXene/Fe3O4 hybrid ETL results in improved power conversion efficiencies (PCEs) of 13.31% and 13.79%, respectively. The observed PCE is improved to 25.80% and 30.34% by blending the MXene/ZnO and MXene/Fe3O4 nanoparticles with the PCBM layer, respectively. Various factors, such as surface modification, swift interfacial interaction, roughness decrement, and charge transport improvement, are strongly influenced to improve the device performance. Moreover, X-ray detectors with the MXene/Fe3O4-modulated PCBM ETL achieve a CCD-DCD, sensitivity, mobility, and trap density of 15.46 µA cm-2, 4.63 mA per Gy per cm2, 5.21 × 10-4 cm2 V-1 s-1, and 1.47 × 1015 cm2 V-1 s-1, respectively. Metal oxide-decorated MXene sheets incorporating the PCBM ETL are a significant route for improving the photoactive species generation, long-term stability, and high mobility of perovskite-based devices.

The First Identification of Cryptosporidium parvum Virus-1 (CSpV1) in Hanwoo (Bos taurus coreanae) Calves in Korea.

Cryptosporidium is an obligate coccidian parasite that causes enteric diseases in bovine species. A double-stranded RNA virus associated with C. parvum oocysts, Cryptosporidium parvum virus-1 (CSpV1), has been characterized. However, the relationship between the abovementioned coccidian parasite and the virus has not been studied in the context of the known clinical outcomes. This study aimed to characterize the prevalence and molecular traits of CSpV1 in diarrheal feces of Hanwoo (Korean indigenous cattle) calves. Of the 140 fecal samples previously tested for C. parvum, which were obtained from Hanwoo calves aged 60 days, 70 tested positive and 70 tested negative. These samples were included in this study. By using the polymerase chain reaction (PCR) analysis targeting the RdRp gene of CSpV1, we detected CSpV1 in 28 samples (20.0%), with infection rates of 31.4% (22/70) in C. parvum-positive and 8.6% (6/70) in C. parvum-negative samples. CSpV1 samples detected in the same farm were clustered together. To the best of our knowledge, this is the first study to report the prevalence and molecular characteristics of CSpV1 in Hanwoo calves in the Republic of Korea, providing important insights into the relationship between C. parvum and CSpV1 in bovine hosts.

Feasibility study of a plasma display-like radiation detector for X-ray imaging.

In this study we have investigated a 2-dimensional gas type detector based on plasma display technology as a candidate for the flat-panel radiation detector. By using the Garfield code, the dependence of X-ray absorption and multiplication on gas composition, cell gap and electric field were examined. Considering the simulation results, three prototype detectors were designed and fabricated. The performance of these detectors was evaluated by measuring the collected charge density, dark current density and sensitivity. The collected charge had the highest value at a condition when Xe 100% and 2.8 mm gap was 108.8 nC/cm² at 1000 V. The dark current of the same detector was varied from 0.0095 to 0.10 nA/cm² and about a fourth of the dark current density of a-Se based detector was at the bias range of 100-1000 V. The sensitivity of Xe 100% and 2.8 mm detector was 0.20 nC/mR·cm² at 0.36 V/um. It is about a tenth lower than that of a-Se based detector at 10 V/um.

Characteristics of the Colorless Polyimide-Based Flexible X-ray Detector with Non-Fullerene Acceptor Polymer.

In this paper, we investigate the characteristics of the colorless polyimide (CPI) film-based flexible organic X-ray detector. The CPI film can be applied to various applications, because it shows excellent visible light transmittance by removing the yellow color of polyimide (PI) film, which has the advantage of physical and chemical stability. In addition, the deformation curvature of the CPI substrate according to temperature showed similar characteristics to that of the glass substrate. For the organic active layer of the proposed detector, PBDB-T was fixed as a donor, and PC71BM and ITIC were used as acceptors. To evaluate the mechanical stability of the flexible detector, the degradation sensitivity was measured as bending curvature and bending cycle. The sensitivity of the detector with ITIC acceptor showed a 46.82% higher result than PC71BM acceptor on bending curvature (R = 10); and at the same curvature, when the bending cycle was 500 times, a 135.85% higher result than PC71BM acceptor.

Fabrication of High-Performance Solar Cells and X-ray Detectors Using MoX2@CNT Nanocomposite-Tuned Perovskite Layers.

The interface design of inorganic and organic halide perovskite-based devices plays an important role to attain high performance. The modification of transport layers (ETL and HTL) or the perovskite layer is given the crucial inspiration to realize superior power conversion efficiencies (PCEs). The highly conducting 2D materials of CNT, graphene/GO, and transition-metal dichalcogenides (TMDs) are suitable substitutes to tune the electronic structure/work function of perovskite devices. Herein, the nanocomposites composed of molybdenum dichalcogenides (MoX2 = MoS2, MoSe2, and MoTe2) stretched CNT was embedded with HTL or perovskite layer to improve the resulted characteristics of perovskite devices of solar cells and X-ray detectors. A superior solar cell efficiency of 12.57% was realized for the MoTe2@CNT nanocomposites using a modified active layer-composed device. Additionally, X-ray detectors with MoTe2@CNT-modulated active layers achieved 13.32 µA/cm2, 3.99 mA/Gy·cm2, 4.81 × 10-4 cm2/V·s, and 2.13 × 1015 cm2/V·s of CCD-DCD, sensitivity, mobility, and trap density, respectively. Density functional theory approximation was used to realize the improved electronics properties, optical properties, and energy band structures in the MoX2@CNT-doped perovskites evidently. Thus, the current research paves the way for the improvement of highly efficient semiconductor devices based on perovskite-based structures with the use of 2D nanocomposites.

Optimized Li4Ti5O12 nanoparticles by solvothermal route for Li-ion batteries.

Li4Ti5O12 (LTO) nanoparticles were successfully synthesized by solvothermal technique using cost-effective precursors in polyol medium and post-annealed at temperatures of 400, 500, and 600 degrees C. The XRD patterns of the samples were clearly indexed to the spinel shaped Li4Ti5O12 (space group, Fd-3 m). The particle size and morphology of samples were identified using field-emission SEM. The electrochemical performance of solvothermal samples revealed fairly high initial discharge/charge specific capacities in the range 230-235 and 170-190 mAh/g, at 1 C-rate, while that registered for the solid-state sample has been 160 and 150 mAh/g, respectively. Furthermore, among these samples, LTO annealed at 500 degrees C exhibited highly improved rate performances at C-rates as high as 30 and 60 C. This was attributed to the achievement of small particle sizes with high crystallinity in nano-scale dimensions and hence shorter diffusion paths combined with larger contact area at the electrode/electrolyte interface.

Direct Growth of CuO Particles on Carbon Papers for High-Performance Rechargeable Li-O2 Batteries.

Lithium-oxygen (Li-O2) batteries are considered as a promising high-energy storage system. However, they suffer from overpotential and low energy efficiency. This study showed that CuO growth on carbon using facile synthesis (simple dipping and heating process) reduces overpotential, thus increasing the energy efficiency. We confirmed the structure of CuO on carbon using X-ray diffraction pattern, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, and field-emission transmission electron microscopy. The cathode of CuO on carbon shows an average overpotential reduction of ˜6% charge/discharge during 10 cycles in nonaqueous Li-O2 batteries. The possible reason for the reduced charge overpotential of the cathode of CuO on carbon is attributed to the formed Li2O2 of smaller particle size during discharging compared to pristine carbon.

Improving the Sensitivity of an Organic Photodetector by Adding a Polar Solvent to the Hole-Transport Layer for Indirect X-ray Detection.

In this work, we investigated how the performance enhancement of an organic X-ray detector was improved by adding a dimethyl sulfoxide (DMSO) polar solvent to poly(3, 4-ethylene dioxythiophene):poly(4-styrene sulfonate) (PEDOT:PSS) hole-transport layer. The changes in the properties, such as surface roughness, chemical structure, sheet resistance, and absorbance, of the PEDOT:PSS film caused by the DMSO treatment were examined. The application of DMSO treatment lowered the resistance of the PEDOT:PSS film because of the removal of PSS and the chemical structure change after DMSO treatment, and thus the transport of light-induced carriers was increased. The organic detector treated with 10 vol% DMSO showed the highest collected current density (CCD) of 357.42 nA/cm² and highest sensitivity of 2.58 mA/Gy ·cm², which were 31.88% and 32.31% higher than the CCD and sensitivity of the detector without DMSO treatment.

Improvement of Indirect X-ray Detector Performance by Applying Additive Solvent to the Organic Active-Layer.

In this paper, we studied how the sensitivity of an indirect X-ray detector was changed by adding the additive solvent DIO to the organic active-layers, such as P3HT:PCBM and PBDB-T:PCBM. The crystallinity and absorbance of the active-layer films were compared with different additive DIO contents. In both active-layers, the highest crystallinity and absorbance were obtained when 3 v% of the DIO was mixed with the active-layer solution. At the same mixing condition of the DIO, the highest sensitivity, of 1.17 mA/Gy · cm2, was obtained for the P3HT:PCBM detector, and the highest sensitivity, 1.87 mA/Gy · cm2, was obtained for the PBDB-T:PCBM detector. Compared to the detector without the DIO, the sensitivities of the detectors with the P3HT:PCBM and PBDB-T:PCBM increased by 18.12% and 20.27%, respectively.

Ultrasonically Processed WSe2 Nanosheets Blended Bulk Heterojunction Active Layer for High-Performance Polymer Solar Cells and X-ray Detectors.

Two-dimensional (2D) tungsten diselenide (WSe2) has attracted considerable attention in the field of photovoltaic devices owing to its excellent structure and photoelectric properties, such as ordered 2D network structure, high electrical conductivity, and high mobility. For this test, we firstly prepared different sizes (NS1-NS3) of WSe2 nanosheets (NSs) through the ultrasonication method and characterized their structures using the field emission scanning electron microscope (FE-SEM), Raman spectroscopy, and X-ray powder diffraction. Moreover, we investigated the photovoltaic performance of polymer solar cells based on 5,7-Bis(2-ethylhexyl)benzo[1,2-c:4,5-c']dithiophene-4,8-dione(PBDB-T):(6,6)-phenyl-C71 butyric acid methyl ester (PCBM) with different WSe2 NSs as the active layer. The fabricated PBDB-T:PCBM active layer with the addition of NS2 WSe2 NSs (1.5 wt%) exhibited an improved power conversion efficiency (PCE) of 9.2%, which is higher than the pure and NS1 and NS3 WSe2 blended active layer-encompassing devices. The improved PCE is attributed to the synergic enhancement of exciton dissociation and an improvement in the charge mobility through the modified active layer for polymer solar cells. Furthermore, the highest sensitivity of 2.97 mA/Gy·cm2 was achieved for the NS2 WSe2 NSs blended active layer detected by X-ray exposure over the pure polymer, and with the NS1 and NS2 WSe2 blended active layer. These results led to the use of transition metal dichalcogenide materials in polymer solar cells and X-ray detectors.

Double-filtered leukoreduction as a method for risk reduction of transfusion-associated graft-versus-host disease.

BACKGROUND: Transfusion-associated graft-versus-host disease (TA-GvHD) is caused by leukocytes, specifically T cells within a transfused blood product. Currently, the prevention of transfusion-associated graft-versus-host disease is performed by irradiation of blood products. With a sufficient reduction of leukocytes, the risk for TA-GvHD can be decreased. With consistent advances in current state-of-the-art blood filters, we herein propose that double filtration can sufficiently reduce leukocytes to reduce the risk for TA-GvHD. MATERIALS: Thirty RBC concentrates were filtered with leukocyte filters, followed by storage at 1-6 oC for 72 hours, and then a second filtration was performed. Residual leukocytes in the double-filtered RBC units (n = 30) were assessed with flow cytometric methods, and an additional assay with isolated peripheral blood mononuclear cells (PBMCs) (n = 6) was done by both flow cytometric methods and an automated hematology analyzer. Quality of the RBCs after filtration was evaluated by hematological and biochemical tests. In vitro T cell expansion was performed using anti-CD3/CD28-coated Dynabeads or anti-CD3 (OKT3). In vivo experiment for GvHD was performed by using NOD.Cg-Prkdcscid Il2rgtm1Wjl/SzJ (NSG) mice. RESULTS: Double-filtered blood products showed residual leukocyte levels below detection limits, which calculated to be below 1200-2500 cells per blood unit. In vitro expansion rate of T cells showed that 6x103 and 1x103 cell-seeded specimens showed 60.8±10.6 fold and 10.2±9.7-fold expansion, respectively. Cell expansion was not sufficiently observed in wells planted with 1x102 or 10 cells. In vivo experiments showed that mice injected with 1x105 or more cells cause fatal GvHD. GvHD induced inflammation was observed in mice injected with 1x104 or more cells. No evidence of GvHD was found in mice injected with 103 cells. CONCLUSIONS: Our study suggests that additional removal of contaminating lymphocytes by a second leukodepletion step may further reduce the risk for TA-GvHD.

Microsatellite loci analysis for the genetic variability and the parentage test of five dog breeds in South Korea.

To investigate the population structure of five dog breeds in South Korea and to validate polymorphic microsatellite markers for the parentage test, microsatellite loci analyses were conducted for two Korean native dog breeds, Poongsan and Jindo, and three imported dog breeds, German Shepherd, Beagle and Greyhound. Overall genetic diversity was high across all dog breeds (expected heterozygosity range: 0.71 to 0.85), although breeds differed in deviations from Hardy-Weinberg equilibrium (HWE). Significant reduction of heterozygosity in the Poongsan and Greyhound breeds was caused by non-random mating and population substructure within these breeds (the Wahlund effects). The close relationship and high degree of genetic diversity for two Korean native dog breeds were substantial. The mean polymorphism information content value was highest in Jindos (0.82) and Poongsans (0.81), followed by Beagles (0.74), Greyhounds (0.72), and German Shepherds (0.66). Accumulated exclusion power values, as an indication of marker validity for parentage tests, were varied but very high across breeds, 0.9999 for Jindos, Poongsans, and Beagles, 0.9997 for Greyhounds, and 0.9995 for German Shepherds. Taken together, the microsatellite loci investigated in this study can serve as suitable markers for the parentage test and as individual identification to establish a reliable pedigree verification system of dog breeds in South Korea. This study also stresses that the population subdivision within breeds can become an important cause of deviation from HWE in dog breeds.

Facile synthesis of partially oxidized Mn3O4-functionalized carbon cathodes for rechargeable Li-O2 batteries.

High charging overpotential (low energy efficiency) is one of the most important challenges preventing the use of current nonaqueous Li-O2 batteries. This study demonstrates direct in situ-incorporation of metal oxides on carbon during synthesis and the associated application to nonaqueous Li-O2 battery catalysts. The partially oxidized Mn3O4 (Mn3O4/Mn5O8)-incorporating carbon cathode shows an average overpotential reduction of ∼8% charge/discharge during 40 cycles in a rechargeable nonaqueous Li-O2 cell. Here, we suggested the possibility that only a small amount of the oxide species (<5%) could show catalytic effects during charge in a rechargeable Li-O2 cell.