Reduction of CO2 by a high-density culture of Chlorella sp. in a semicontinuous photobioreactor.

The microalga incorporated photobioreactor is a highly efficient biological system for converting CO2 into biomass. Using microalgal photobioreactor as CO2 mitigation system is a practical approach for elimination of waste gas from the CO2 emission. In this study, the marine microalga Chlorella sp. was cultured in a photobioreactor to assess biomass, lipid productivity and CO2 reduction. We also determined the effects of cell density and CO2 concentration on the growth of Chlorella sp. During an 8-day interval cultures in the semicontinuous cultivation, the specific growth rate and biomass of Chlorella sp. cultures in the conditions aerated 2-15% CO2 were 0.58-0.66 d(-1) and 0.76-0.87 gL(-1), respectively. At CO2 concentrations of 2%, 5%, 10% and 15%, the rate of CO2 reduction was 0.261, 0.316, 0.466 and 0.573 gh(-1), and efficiency of CO2 removal was 58%, 27%, 20% and 16%, respectively. The efficiency of CO2 removal was similar in the single photobioreactor and in the six-parallel photobioreactor. However, CO2 reduction, production of biomass, and production of lipid were six times greater in the six-parallel photobioreactor than those in the single photobioreactor. In conclusion, inhibition of microalgal growth cultured in the system with high CO2 (10-15%) aeration could be overcome via a high-density culture of microalgal inoculum that was adapted to 2% CO2. Moreover, biological reduction of CO2 in the established system could be parallely increased using the photobioreactor consisting of multiple units.

Bacteriostatic Effect of a Calcined Waste Clamshell-Activated Plastic Film for Food Packaging.

The addition of calcined waste clamshells (CCS) into polyethylene (PE) plastic bags imparts antibacterial properties due to the presence of CaO. In this study, different proportions of calcined waste clamshells were added to PE to explore its bacteriostatic effects. The PE plastic bags with 9% and 11% of CCS exhibited antibacterial efficacy. Further, total aerobic viable count (TVC) values for raw fish fillet packaging in 9% and 11% CCS-PE plastic bags for five days were similar to the 0% CCS-PE plastic bag group after three days of incubation. In addition, the CCS-PE plastic bag demonstrated stability against solvents when examined using the metal migration test under heptane, ethanol, and acetic acid treatments. The results revealed that the CCS-PE bag retains its CaO bacteriostatic efficacy and that the addition of CCS powder to PE prolongs the shelf life of raw fish fillets, as well as mitigating safety concerns from metal leakage.

In-prison treatment for sexual offenders in Taiwan.

The present study was designed to investigate the current status of mandated treatment in prison for sexual offenders in Taiwan. The information-gathering methods were composed of two parts: questionnaires and interviews. The results showed the difficulties of mandated treatment in prison, including poor client adherence, the lack of consistent disciplines for the therapists, a standardized algorithm, and explicit laws and rules, the safety concerns of the therapists, and a shortage of staff. The development of mandated treatment in prison of sexual offenders in Taiwan is still in its early stage, and the treatment models have not yet been integrated. A cooperative and collaborative center for the mandated treatment in prison of sexual offenders and an integrated rule and treatment model should be set up in the future.

Ferrofluid-assisted rapid and directional harvesting of marine microalgal Chlorella sp. used for biodiesel production.

In this work, a novel harvesting strategy using ferrofluids coupled with flocculation as a magnetic directional harvesting system was developed, providing a fast and easy way to effectively collect microalgae with no further modifications made to the ferrofluids. With a ferrofluid dosage of 25mgL-1, a high harvesting efficiency of 95-100% was achieved within 1min. In addition, we successfully performed a wastewater recycling strategy coupled with a microalgal ferrofluid-harvesting dynamic flow-through system to harvest biomass of Chlorella sp. MTF-7 which could achieve over 80% of the maximum level after three repeated recycling cultivations. This work demonstrated the use of an integrated microalgal ferrofluid-harvesting dynamic flow-through system to develop a simple and effective strategy to enhance microalgal harvesting efficiency, along with wastewater recycling, in a marine microalgal Chlorella sp. MTF-7.

Cultivation of Chlorella sp. GD using piggery wastewater for biomass and lipid production.

The development of a culture system for Chlorella sp. GD to efficiently produce biomass and oil for biodiesel production was investigated. Chlorella sp. GD was cultivated with 0%, 25%, 50%, 75% and 100% piggery wastewater (diluted by medium) at 300 µmol m(-2) s(-1), a 2% CO2 aeration rate of 0.2 vvm and 26±1°C; after a 10-day culture in batch cultures, the maximum specific growth rate and biomass productivity of the microalga obtained in 100% piggery wastewater were 0.839 d(-1) and 0.681 g L(-1) d(-1), respectively. The highest lipid content and lipid productivity were 29.3% and 0.155 g L(-1) d(-1) at 25% wastewater, respectively. In semi-continuous cultures, the biomass and lipid productivities with 25-75% wastewater ratios were greater than 0.852 and 0.128 g L(-1) d(-1), respectively. These results show that Chlorella sp. GD grows efficiently in piggery wastewater, and that a stable growth performance was achieved for long-term microalgal cultivation in a semi-continuous culture.

Cultivation of microalgal Chlorella for biomass and lipid production using wastewater as nutrient resource.

Using wastewater for microalgal cultures is beneficial for minimizing the use of freshwater, reducing the cost of nutrient addition, removing nitrogen and phosphorus from wastewater and producing microalgal biomass as bioresources for biofuel or high-value by-products. There are three main sources of wastewater, municipal (domestic), agricultural and industrial wastewater, which contain a variety of ingredients. Some components in the wastewater, such as nitrogen and phosphorus, are useful ingredients for microalgal cultures. In this review, the effects on the biomass and lipid production of microalgal Chlorella cultures using different kinds of wastewater were summarized. The use of the nutrients resource in wastewater for microalgal cultures was also reviewed. The effect of ammonium in wastewater on microalgal Chlorella growth was intensively discussed. In the end, limitations of wastewater-based of microalgal culture were commented in this review article.

Utilization of carbon dioxide in industrial flue gases for the cultivation of microalga Chlorella sp.

The biomass and lipid productivity of Chlorella sp. MTF-15 cultivated using aeration with flue gases from a coke oven, hot stove or power plant in a steel plant of the China Steel Corporation in Taiwan were investigated. Using the flue gas from the coke oven, hot stove or power plant for cultivation, the microalgal strain obtained a maximum specific growth rate and lipid production of (0.827 d(-1), 0.688 g L(-1)), (0.762 d(-1), 0.961 g L(-1)), and (0.728 d(-1), 0.792 g L(-1)), respectively. This study demonstrated that Chlorella sp. MTF-15 could efficiently utilize the CO2, NOX and SO2 present in the different flue gases. The results also showed that the growth potential, lipid production and fatty acid composition of the microalgal strain were dependent on the composition of the flue gas and on the operating strategy deployed.

Microalgal biomass production and on-site bioremediation of carbon dioxide, nitrogen oxide and sulfur dioxide from flue gas using Chlorella sp. cultures.

The growth and on-site bioremediation potential of an isolated thermal- and CO2-tolerant mutant strain, Chlorella sp. MTF-7, were investigated. The Chlorella sp. MTF-7 cultures were directly aerated with the flue gas generated from coke oven of a steel plant. The biomass concentration, growth rate and lipid content of Chlorella sp. MTF-7 cultured in an outdoor 50-L photobioreactor for 6 days was 2.87 g L⁻¹ (with an initial culture biomass concentration of 0.75 g L⁻¹), 0.52 g L⁻¹ d⁻¹ and 25.2%, respectively. By the operation with intermittent flue gas aeration in a double-set photobioreactor system, average efficiency of CO2 removal from the flue gas could reach to 60%, and NO and SO2 removal efficiency was maintained at approximately 70% and 50%, respectively. Our results demonstrate that flue gas from coke oven could be directly introduced into Chlorella sp. MTF-7 cultures to potentially produce algal biomass and efficiently capture CO2, NO and SO2 from flue gas.

Characterization of the thermal-tolerant mutants of Chlorella sp. with high growth rate and application in outdoor photobioreactor cultivation.

In this study, two thermal-tolerant mutants of Chlorella sp. MT-7 and MT-15, were isolated. In indoor cultivation, specific growth rate (micro, d(-1)) of the mutants were 1.4 to 1.8-fold at 25 degrees Celsius and 3.3 to 6.7-fold at 40 degrees Celsius higher than those of wild type. The carbon dioxide fixation rate of both microalgal mutants was also significantly higher than that of wild type. In outdoor closed cultivation, where the temperature of culture broth was 41 + or - 1 degrees Celsius, the micro of mutant strain MT-15 was 0.238 d(-1) during an 8-day cultivation. Whereas, the growth of wild type was inhibited in the outdoor cultivation. Our results show that the isolated microalgal strains are adaptable to be applied in outdoor cultivation in subtropical zones.

Lipid accumulation and CO2 utilization of Nannochloropsis oculata in response to CO2 aeration.

In order to produce microalgal lipids that can be transformed to biodiesel fuel, effects of concentration of CO(2) aeration on the biomass production and lipid accumulation of Nannochloropsis oculata in a semicontinuous culture were investigated in this study. Lipid content of N. oculata cells at different growth phases was also explored. The results showed that the lipid accumulation from logarithmic phase to stationary phase of N. oculata NCTU-3 was significantly increased from 30.8% to 50.4%. In the microalgal cultures aerated with 2%, 5%, 10% and 15% CO(2), the maximal biomass and lipid productivity in the semicontinuous system were 0.480 and 0.142 g L(-1)d(-1) with 2% CO(2) aeration, respectively. Even the N. oculata NCTU-3 cultured in the semicontinuous system aerated with 15% CO(2), the biomass and lipid productivity could reach to 0.372 and 0.084 g L(-1)d(-1), respectively. In the comparison of productive efficiencies, the semicontinuous system was operated with two culture approaches over 12d. The biomass and lipid productivity of N. oculata NCTU-3 were 0.497 and 0.151 g L(-1)d(-1) in one-day replacement (half broth was replaced each day), and were 0.296 and 0.121 g L(-1)d(-1) in three-day replacement (three fifth broth was replaced every 3d), respectively. To optimize the condition for long-term biomass and lipid yield from N. oculata NCTU-3, this microalga was suggested to grow in the semicontinuous system aerated with 2% CO(2) and operated by one-day replacement.