A Dormant Reagent Reaction-Diffusion Method for the Generation of Co-Fe Prussian Blue Analogue Periodic Precipitate Particle Libraries.

Liesegang patterns that develop as a result of reaction-diffusion can simultaneously form products with slightly different sizes spatially separated in a single medium. We show here a reaction-diffusion method using a dormant reagent (citrate) for developing Liesegang patterns of cobalt hexacyanoferrate Prussian Blue analog (PBA) particle libraries. This method slows the precipitation reaction and produces different-sized particles in a gel medium at different locations. The gel-embedded particles are still catalytically active. Finally, the applicability of the new method to other PBAs and 2D systems is presented. The method proves promising for obtaining similar inorganic framework libraries with catalytic abilities.

Manipulating Intermetallic Charge Transfer for Switchable External Stimulus-Enhanced Water Oxidation Electrocatalysis.

Electrocatalytic processes involving the oxygen evolution reaction (OER) present a kinetic bottleneck due to the existence of linear-scaling relationships, which bind the energies of the different intermediates in the mechanism limiting optimization. Here, we offer a way to break these scaling relationships and enhance the electrocatalytic activity of a Co-Fe Prussian blue modified electrode in OER by applying external stimuli. Improvements of ≈11 % and ≈57 % were achieved under magnetic field (0.2 T) and light irradiation (100 mW cm-2 ), respectively, when working at fixed overpotential, η=0.6 V at pH 7. The observed enhancements strongly tie in with the intermetallic charge transfer (IMCT) intensity between Fe and Co sites. Density Functional Theory simulations suggest that tuning the IMCT can lead to a change of the OER mechanism to an external stimuli-sensitive spin crossover-based pathway, which opens the way for switchable electrocatalytic devices.

Light-Driven Water Oxidation with Ligand-Engineered Prussian Blue Analogues.

The elucidation of the ideal coordination environment of a catalytic site has been at the heart of catalytic applications. Herein, we show that the water oxidation activities of catalytic cobalt sites in a Prussian blue (PB) structure could be tuned systematically by decorating its coordination sphere with a combination of cyanide and bidentate pyridyl groups.  K0.1[Co(bpy)]2.9[Fe(CN)6]2 ([Cobpy-Fe]), K0.2[Co(phen)]2.8[Fe(CN)6]2 ([Cophen-Fe]), {[Co(bpy)2]3[Fe(CN)6]2}[Fe(CN)6]1/3 ([Cobpy2-Fe]), and {[Co(phen)2]3[Fe(CN)6]2}[Fe(CN)6]1/3 Cl0.11 ([Cophen2-Fe]) were prepared by introducing bidentate pyridyl groups (phen: 1,10-phenanthroline, bpy: 2,2'-bipyridine) to the common synthetic protocol of Co-Fe Prussian blue analogues. Characterization studies indicate that [Cobpy2-Fe] and [Cophen2-Fe] adopt a pentanuclear molecular structure, while [Cobpy-Fe] and [Cophen-Fe] could be described as cyanide-based coordination polymers with lower-dimensionality and less crystalline nature compared to the regular Co-Fe Prussian blue analogue (PBA), K0.1Co2.9[Fe(CN)6]2 ([Co-Fe]). Photocatalytic studies reveal that the activities of [Cobpy-Fe] and [Cophen-Fe] are significantly enhanced compared to those of [Co-Fe], while molecular [Cobpy2-Fe] and [Cophen2-Fe] are inactive toward water oxidation. [Cobpy-Fe] and [Cophen-Fe] exhibit upper-bound turnover frequencies (TOFs) of 1.3 and 0.7 s-1, respectively, which are ∼50 times higher than that of [Co-Fe] (1.8 × 10-2 s-1). The complete inactivity of [Cobpy2-Fe] and [Cophen2-Fe] confirms the critical role of aqua coordination to the catalytic cobalt sites for oxygen evolution reaction (OER). Computational studies show that bidentate pyridyl groups enhance the susceptibility of the rate-determining Co(IV)-oxo species to the nucleophilic water attack during the critical O-O bond formation. This study opens a new route toward increasing the intrinsic water oxidation activity of the catalytic sites in PB coordination polymers.

How to Build Prussian Blue Based Water Oxidation Catalytic Assemblies: Common Trends and Strategies.

Prussian blue (PB) and its analogues (PBAs) have at least a three-century-long history in coordination chemistry. Recently, cobalt-based PBAs have been acknowledged as efficient and robust water oxidation catalysts. Given the flexibility in their synthesis, the structure and morphology of cobalt-based PBAs have been modified for enhanced catalytic activity under electrochemical (EC), photocatalytic (PC), and photoelectrochemical (PEC) conditions. Here, in this review, the work on cobalt-based PBAs is presented in four sections: i) electrocatalytic water oxidation with bare PBAs, ii) photocatalytic processes in the presence of a photosensitizer (PS), iii) photoelectrochemical water oxidation by coupling PBAs to proper semiconductors (SCs), and iv) the utilization of PBA-PS assemblies coated on SCs for the dye-sensitized photoelectrochemical water oxidation. This review will guide readers through the structure and catalytic activity relationship in cobalt-based PBAs by describing the role of each structural component. Furthermore, this review aims to provide insight into common strategies to enhance the catalytic activity of PBAs.

Building an Iron Chromophore Incorporating Prussian Blue Analogue for Photoelectrochemical Water Oxidation.

Invited for the cover of this issue is the Ferdi Karadas and Ekmel Ozbay groups at Bilkent University and co-workers. The image presents an utopic city in Iron Age, which is powered by an iron photosensitizer that bridges semiconductor buildings (TiO2 nanowires) and the catalyst (cobalt site). Read the full text of the article at 10.1002/chem.202100654.

Building an Iron Chromophore Incorporating Prussian Blue Analogue for Photoelectrochemical Water Oxidation.

The replacement of traditional ruthenium-based photosensitizers with low-cost and abundant iron analogs is a key step for the advancement of scalable and sustainable dye-sensitized water splitting cells. In this proof-of-concept study, a pyridinium ligand coordinated pentacyanoferrate(II) chromophore is used to construct a cyanide-based CoFe extended bulk framework, in which the iron photosensitizer units are connected to cobalt water oxidation catalytic sites through cyanide linkers. The iron-sensitized photoanode exhibits exceptional stability for at least 5 h at pH 7 and features its photosensitizing ability with an incident photon-to-current conversion capacity up to 500 nm with nanosecond scale excited state lifetime. Ultrafast transient absorption and computational studies reveal that iron and cobalt sites mutually support each other for charge separation via short bridging cyanide groups and for injection to the semiconductor in our proof-of-concept photoelectrochemical device. The reorganization of the excited states due to the mixing of electronic states of metal-based orbitals subsequently tailor the electron transfer cascade during the photoelectrochemical process. This breakthrough in chromophore-catalyst assemblies will spark interest in dye-sensitization with robust bulk systems for photoconversion applications.

A Robust, Precious-Metal-Free Dye-Sensitized Photoanode for Water Oxidation: A Nanosecond-Long Excited-State Lifetime through a Prussian Blue Analogue.

Herein, we establish a simple synthetic strategy affording a heterogeneous, precious metal-free, dye-sensitized photoelectrode for water oxidation, which incorporates a Prussian blue (PB) structure for the sensitization of TiO2 and water oxidation catalysis. Our approach involves the use of a Fe(CN)5 bridging group not only as a cyanide precursor for the formation of a PB-type structure but also as an electron shuttle between an organic chromophore and the catalytic center. The resulting hetero-functional PB-modified TiO2 electrode demonstrates a low-cost and easy-to-construct photoanode, which exhibits favorable electron transfers with a remarkable excited state lifetime on the order of nanoseconds and an extended light absorption capacity of up to 500 nm. Our approach paves the way for a new family of precious metal-free robust dye-sensitized photoelectrodes for water oxidation, in which a variety of common organic chromophores can be employed in conjunction with CoFe PB structures.

Visible light-driven water oxidation with a ruthenium sensitizer and a cobalt-based catalyst connected with a polymeric platform.

A facile synthesis for a photosensitizer-water oxidation catalyst (PS-WOC) dyad, which is connected through a polymeric platform, has been reported. The dyad assembly consists of a ruthenium-based chromophore and a cobalt-iron pentacyanoferrate coordination network as the water oxidation catalyst while poly(4-vinylpyridine) serves as the bridging group between two collaborating units. Photocatalytic experiments in the presence of an electron scavenger reveal that the dyad assembly maintains its activity for 6 h while the activity of a cobalt hexacyanoferrate and Ru(bpy)32+ couple decreases gradually and eventually decays after a 3 h catalytic experiment. Infrared and XPS studies performed on the post-catalytic powder sample confirm the stability of the dyad during the catalytic process.

Molten Salt Assisted Self-Assembly: Synthesis of Mesoporous LiCoO2 and LiMn2 O4 Thin Films and Investigation of Electrocatalytic Water Oxidation Performance of Lithium Cobaltate.

Mesoporous thin films of transition metal lithiates (TML) belong to an important group of materials for the advancement of electrochemical systems. This study demonstrates a simple one pot method to synthesize the first examples of mesoporous LiCoO2 and LiMn2 O4 thin films. Molten salt assisted self-assembly can be used to establish an easy route to produce mesoporous TML thin films. The salts (LiNO3 and [Co(H2 O)6 ](NO3 )2 or [Mn(H2 O)4 ](NO3 )2 ) and two surfactants (10-lauryl ether and cethyltrimethylammonium bromide (CTAB) or cethyltrimethylammonium nitrate (CTAN)) form stable liquid crystalline mesophases. The charged surfactant is needed for the assembly of the necessary amount of salt in the hydrophilic domains of the mesophase, which produces stable metal lithiate pore-walls upon calcination. The films have a large pore size with a high surface area that can be increased up to 82 m2 g-1 . The method described can be adopted to synthesize other metal oxides and metal lithiates. The mesoporous thin films of LiCoO2 show promising performance as water oxidation catalysts under pH 7 and 14 conditions. The electrodes, prepared using CTAN as the cosurfactant, display the lowest overpotentials in the literature among other LiCoO2 systems, as low as 376 mV at 10 mA cm-2 and 282 mV at 1 mA cm-2 .

Tuning the Electronic Properties of Prussian Blue Analogues for Efficient Water Oxidation Electrocatalysis: Experimental and Computational Studies.

Although several Prussian Blue analogues (PBAs) have been investigated as water oxidation catalysts, the field lacks a comprehensive study that focuses on the design of the ideal PBA for this purpose. Here, members of a series of PBAs with different cyanide precursors have been investigated to study the effect of hexacyanometal groups on their electrocatalytic water oxidation activities. Cyclic voltammetric, chronoamperometric, and chronopotentiometric measurements have revealed a close relationship between the electron density of electroactive cobalt sites and electrocatalytic activity, which has also been confirmed by infrared and XPS studies. Furthermore, pH-dependent cyclic voltammetry and computational studies have been performed to gain insight into the catalytic mechanism and electronic structure of cyanide-based systems to identify possible intermediates and to assign the rate-determining step of the target process.

Water Oxidation Electrocatalysis with a Cobalt-Borate-Based Hybrid System under Neutral Conditions.

The development of new water oxidation electrocatalysts that are both stable and efficient, particularly in neutral conditions, holds great promise for overall water splitting. In this study, the electrocatalytic water oxidation performance of a new cobalt-based catalyst, Co3 (BO3 )2 , with a Kotoite-type crystal structure is investigated under neutral conditions. The catalyst is also hybridized with CNTs to enhance its electrocatalytic properties. A remarkable increase in catalytic current along with a significant shift in the onset overpotential is observed in Co3 (BO3 )2 @CNT. Additionally, CNT addition also greatly influences the surface concentration of the catalyst: 12.7 nmol cm-2 for Co3 (BO3 )2 @CNT compared with 3.9 nmol cm-2 for Co3 (BO3 )2 . Co3 (BO3 )2 @CNT demands overpotentials of 303 and 487 mV to attain current densities of 1 and 10 mA cm-2 , respectively, at pH 7. Electrochemical and characterization studies performed over varying pH conditions reveal that the catalyst retains its stability over a pH range of 3-14. Multi-reference quantum chemical calculations are performed to study the nature of the active cobalt sites and the effect of boron atoms on the activity of the cobalt ions.

A Noble-Metal-Free Heterogeneous Photosensitizer-Relay Catalyst Triad That Catalyzes Water Oxidation under Visible Light.

An entirely earth-abundant chromophore-relay water oxidation catalyst triad system, which is robust and efficient at neutral pH, is presented. The synthesis involves the coordination of a porphyrin derivative to a bridging Fe(CN)5 group, which is then reacted with Co ions to prepare a covalently linked chromophore-Prussian blue analogue assembly. Light-driven water oxidation studies in the presence of an electron scavenger indicate that the triad is active and it maintains a steady activity for at least three hours. Transient absorption experiments and computational studies reveal that the Fe(CN)5 group is more than a linker as it takes part in electron-transfer and co-operates with porphyrin in the charge separation process.

A Novel Synthetic Route for the Preparation of an Amorphous Co/Fe Prussian Blue Coordination Compound with High Electrocatalytic Water Oxidation Activity.

Co/Fe Prussian Blue coordination networks have recently been investigated for heterogeneous water oxidation catalysis. Despite their robustness and stability in both acidic and neutral media, the relatively low current density obtained is their main drawback as a result of their low surface concentration. A novel synthetic approach was employed using a pentacyanometalate-based metallopolymer for the preparation of amorphous Co/Fe coordination polymers to overcome this problem. The surface concentration was improved approximately 7-fold, which also resulted in an increase in the catalytic activity. A current density of 1 mA·cm(-2) was obtained only at η = 510 mV, while the same current density could be obtained at higher overpotentials (>600 mV) with conventional Prussian Blue analogues. IR, X-ray photoelectron spectroscopy, and energy-dispersive X-ray spectroscopy studies were performed to investigate the stability of electrodes before and after the electrocatalytic process. The results of this study indicate that the rich and diverse chemistry of pentacyanometalates makes them potential candidates for application in heterogeneous water oxidation catalysis.

3D-Cobalt-Dicyanamide-Derived 2D-Layered-Co(OH)2-Based Catalyst for Light-Driven Hydrogen Evolution.

Derivation of 3D coordination polymers to produce active catalysts has been a feasible strategy to achieve a precise coordination sphere for the catalytic site. This study demonstrates the partial conversion of a 3D cobalt dicyanamide coordination polymer, Co-dca, to a 2D layered hydroxide-oxyhydroxide structure under photocatalytic conditions. The catalyst exhibits an activity as high as 28.3 mmol h-1 g-1 in the presence of a [Ru(bpy)3]2+/triethylamine (TEA) couple to maintain it for at least 12 h. Photocatalytic and characterization studies reveal that the dicyanamide ligand within the coordination polymer is crucial for governing modification and achieving a superior H2 evolution rate. Moreover, we observed the critical role of TEA as the hydrolyzing agent for the transformation process. This study displays that the metal dicyanamides can be utilized as templates for preparing active and robust catalysts.

Tunable Photocatalytic Activity of CoFe Prussian Blue Analogue Modified SrTiO3 Core-Shell Structures for Solar-Driven Water Oxidation.

This study presents a pioneering semiconductor-catalyst core-shell architecture designed to enhance photocatalytic water oxidation activity significantly. This innovative assembly involves the in situ deposition of CoFe Prussian blue analogue (PBA) particles onto SrTiO3 (STO) and blue SrTiO3 (bSTO) nanocubes, effectively establishing a robust p-n junction, as demonstrated by Mott-Schottky analysis. Of notable significance, the STO/PB core-shell catalyst displayed remarkable photocatalytic performance, achieving an oxygen evolution rate of 129.6 µmol g-1 h-1, with stability over an extended 9-h in the presence of S2O82- as an electron scavenger. Thorough characterization unequivocally verified the precise alignment of the band energies within the STO/PB core-shell assembly. Our research underscores the critical role of tailored semiconductor-catalyst interfaces in advancing the realm of photocatalysis and its broader applications in renewable energy technologies.

Rational design of an acceptor-chromophore-relay-catalyst tetrad assembly for water oxidation.

We report the step-by-step synthesis of a precious metal-free acceptor-chromophore-relay-catalyst tetrad assembly that exhibits a turnover frequency (TOF) of 7.5 × 10-3 s-1 under neutral conditions. Transient absorption spectroscopic studies indicate that upon fullerenol incorporation into the investigated complexes, charge separation efficiency increases considerably.

Limitations and high pressure behavior of MOF-5 for CO2 capture.

Porous network structures (e.g. metal-organic frameworks, MOFs) show considerable potential in dethroning monoethanol amine (MEA) from being the dominant scrubber for CO2 at the fossil-fuel-burning power generators. In contrast to their promise, structural stability and high-pressure behavior of MOFs are not well documented. We herein report moisture stability, mechanical properties and high-pressure compression on a model MOF structure, MOF-5. Our results show that MOF-5 can endure all tested pressures (0-225 bar) without losing its structural integrity, however, its moist air stability points at a 3.5 hour safety window (at 21.6 °C and 49% humidity) for an efficient CO2 capture. Isosteric heats of CO2 adsorption at high pressures show moderate interaction energy between CO2 molecules and the MOF-5 sorbent, which combined with the large sorption ability of MOF-5 in the studied pressure-temperature ranges show the viability of this sorbent for CO2 capturing purposes. The combination of the physicochemical methods we used suggests a generalized analytical standard for measuring viability in CO2 capture operations.

Low-Pressure Deuterium Storage on Palladium-Coated Titanium Nanofilms: A Versatile Model System for Tritium-Based Betavoltaic Battery Applications.

Deuterium (D2(g)) storage of Pd-coated Ti ultra-thin films at relatively low pressures is fine-tuned by systematically controlling the thicknesses of the catalytic Pd overlayer, underlying Ti ultra-thin film domain, D2(g) pressure (PD2), duration of D2(g) exposure, and the thin film temperature. Structural properties of the Ti/Pd nanofilms are investigated via XRD, XPS, AFM, SEM, and TPD to explore new structure-functionality relationships. Ti/Pd thin film systems are deuterated to obtain a D/Ti ratio of up to 1.53 forming crystallographically ordered titanium deuteride (TiDx) phases with strong Tix+-Dy- electronic interactions and high thermal stability, where >90% of the stored D resides in the Ti component, thermally desorbing at >460 °C in the form of D2(g). Electronic interaction between Pd and D is weak, yielding metallic (Pd0) states where D storage occurs mostly on the Pd film surface (i.e., without forming ordered bulk PdDx phases) leading to the thermal desorption of primarily DOH(g) and D2O(g) at <265 °C. D-storage typically increases with increasing Ti film thickness, PD2, T, and t, whereas D-storage is found to be sensitive to the thickness and the surface roughness of the catalytic Pd overlayer. Optimum Pd film thickness is determined to be 10 nm providing sufficient surface coverage for adequate wetting of the underlying Ti film while offering an appropriate number of surface defects (roughness) for D immobilization and a relatively short transport pathlength for efficient D diffusion from Pd to Ti. The currently used D-storage optimization strategy is also extended to a realistic tritium-based betavoltaic battery (BVB) device producing promising ß-particle emission yields of 164 mCi/cm2, an open circuit potential (VOC) of 2.04 V, and a short circuit current (ISC) of 7.2 nA.