RESUMEN
In situ 3D bioprinting is a new emerging therapeutic modality for treating human skin diseases. The tissue spheroids have been previously suggested as a powerful tool in rapidly expanding bioprinting technology. It has been demonstrated that the regenerative potential of human dermal fibroblasts could be quantitatively evaluated in 2D cell culture and confirmed after implantation in vivo. However, the development of unbiassed quantitative criteria of the regenerative potential of 3D tissue spheroids in vitro before their in situ bioprinting remains to be investigated. Here it has been demonstrated for the first time that specific correlations exist between the regenerative potential of human dermal fibroblasts cultured in vitro as 2D cell monolayer with biological properties of 3D tissue spheroids fabricated from these fibroblasts. In vitro assessment of biological properties included diameter, spreading and fusion kinetics, and biomechanical properties of 3D tissue spheroids. This comprehensive characterization could be used to predict tissue spheroids' regenerative potential in vivo.
Asunto(s)
Bioimpresión , Esferoides Celulares , Humanos , Fibroblastos , Técnicas de Cultivo de Célula , Piel , Ingeniería de TejidosRESUMEN
The precise mechanical properties of many tissues are highly dependent on both the composition and arrangement of the nanofibrous extracellular matrix. It is well established that collagen nanofibers exhibit a crimped microstructure in several tissues such as blood vessel, tendon, and heart valve. This collagen fiber arrangement results in the classic non-linear 'J-shaped' stress strain curve characteristic of these tissues. Synthetic biomimetic fibrous materials with a crimped microstructure similar to natural collagen demonstrate similar mechanical properties to natural tissues. The following work describes a nanofabrication method based on electrospinning used to fabricate two component hybrid electrospun fibrous materials that mimic the microstructure and mechanical properties of vascular tissue. The properties of these samples can be precisely and predictably optimized by modifying fabrication parameters. Tubular grafts with biomimetic microstructure were constructed to demonstrate the potential of this fabrication method in vascular graft replacement applications. It was possible to closely match both the overall geometry and the compliance of specific blood vessels by optimizing graft microstructure.
Asunto(s)
Materiales Biomiméticos , Bioprótesis , Nanofibras , Injerto Vascular , Biomimética , Prótesis Vascular , Colágeno , Materiales Biomiméticos/química , Ingeniería de Tejidos/métodos , Nanofibras/química , Andamios del Tejido/químicaRESUMEN
Background: This research explores the biomechanical and structural characteristics of ascending thoracic aortic aneurysms (ATAAs), focusing on the differences between bicuspid aortic valve aneurysms (BAV-As) and tricuspid aortic valve aneurysms (TAV-As) with non-dilated aortas to identify specific traits of ATAAs. Methods: Clinical characteristics, laboratory indices, and imaging data from 26 adult patients operated on for aneurysms (BAV-A: n = 12; TAV-A: n = 14) and 13 controls were analyzed. Biomechanical parameters (maximal aortic diameter, strain, and stress) and structural analyses (collagen fiber organization, density, fragmentation, adipocyte deposits, and immune cell infiltration) were assessed. Results: Significant differences in biomechanical parameters were observed. Median maximal strain was 40.0% (control), 63.4% (BAV-A), and 45.3% (TAV-A); median maximal stress was 0.59 MPa (control), 0.78 MPa (BAV-A), and 0.48 MPa (TAV-A). BAV-A showed higher tangential modulus and smaller diameter, with substantial collagen fragmentation (p < 0.001 vs. TAV and controls). TAV-A exhibited increased collagen density (p = 0.025), thickening between media and adventitia layers, and disorganized fibers (p = 0.036). BAV-A patients had elevated adipocyte deposits and immune cell infiltration. Conclusions: This study highlights distinct pathological profiles associated with different valve anatomies. BAV-A is characterized by smaller diameters, higher biomechanical stress, and significant collagen deterioration, underscoring the necessity for tailored clinical strategies for effective management of thoracic aortic aneurysm.
RESUMEN
Three-dimensional (3D) bioprinting, a promising advancement in tissue engineering technology, involves the robotic, layer-by-layer additive biofabrication of functional 3D tissue and organ constructs. This process utilizes biomaterials, typically hydrogels and living cells, following digital models. Traditional tissue engineering uses a classic triad of living cells, scaffolds, and physicochemical signals in bioreactors. A scaffold is a temporary, often biodegradable, support structure. Tissue engineering primarily falls into two categories: (i) scaffold based and (ii) scaffold free. The latter, scaffold-free 3D bioprinting, is gaining increasing popularity. Organ building blocks (OBB), capable of self-assembly and self-organization, such as tissue spheroids, organoids, and assembloids, have begun to be utilized in scaffold-free bioprinting. This article discusses the expanding range of OBB, presents the rapidly evolving collection of bioprinting and bioassembly methods using these OBB, and finally, outlines the advantages, challenges, and future perspectives of using OBB in organ printing.
RESUMEN
The aim of this study was to assess structural and biochemical differences in the extracellular matrix of the fetal and adult porcine mitral heart valves in relation to their mechanical characteristics. Using tensile tests it was demonstrated that the material properties of porcine mitral heart valves progressively change with age. The collagen content of the adult heart valve, as estimated by hydroxyproline assay, increases three times as compared with fetal heart valves. Transmission electron microscopy demonstrated that the diameter of collagen fibrils increased in adult heart valves compared with fetal heart valves. The level of collagen cross-linking is lower in the fetal heart valve than the adult heart valve. The reported age differences in the material properties of fetal and adult porcine heart valves were associated with increases in collagen content, the diameter of collagen fibrils and the level of collagen cross-linking. These data lay a foundation for systematic elucidation of the structural determinants of material properties of heart valves during embryonic and postnatal valvulogenesis. They are also essential to define the desirable level of tissue maturation in heart valve tissue engineering.
Asunto(s)
Envejecimiento/fisiología , Válvula Mitral/anatomía & histología , Válvula Mitral/fisiología , Animales , Fenómenos Biomecánicos , Colágeno/metabolismo , Reactivos de Enlaces Cruzados/metabolismo , Feto/anatomía & histología , Feto/fisiología , Válvula Mitral/embriología , Válvula Mitral/ultraestructura , Sus scrofaRESUMEN
In situ bioprinting is one of the most clinically relevant techniques in the emerging bioprinting technology because it could be performed directly on the human body in the operating room and it does not require bioreactors for post-printing tissue maturation. However, commercial in situ bioprinters are still not available on the market. In this study, we demonstrated the benefit of the originally developed first commercial articulated collaborative in situ bioprinter for the treatment of full-thickness wounds in rat and porcine models. We used an articulated and collaborative robotic arm from company KUKA and developed original printhead and correspondence software enabling in situ bioprinting on curve and moving surfaces. The results of in vitro and in vivo experiments show that in situ bioprinting of bioink induces a strong hydrogel adhesion and enables printing on curved surfaces of wet tissues with a high level of fidelity. The in situ bioprinter was convenient to use in the operating room. Additional in vitro experiments (in vitro collagen contraction assay and in vitro 3D angiogenesis assay) and histological analyses demonstrated that in situ bioprinting improves the quality of wound healing in rat and porcine skin wounds. The absence of interference with the normal process of wound healing and even certain improvement in the dynamics of this process strongly suggests that in situ bioprinting could be used as a novel therapeutic modality in wound healing.
RESUMEN
The concept of "lockyballs" or interlockable mini-scaffolds fabricated by two-photon polymerization from biodegradable polymers for the encagement of tissue spheroids and their delivery into the desired location in the human body has been recently introduced. In order to improve control of delivery, positioning, and assembly of mini-scaffolds with tissue spheroids inside, they must be functionalized. This review describes the design, fabrication, and functionalization of mini-scaffolds as well as perspectives on their application in tissue engineering for precisely controlled cell and mini-tissue delivery and patterning. The development of functionalized mini-scaffolds advances the original concept of "lockyballs" and opens exciting new prospectives for mini-scaffolds' applications in tissue engineering and regenerative medicine and their eventual clinical translation.
RESUMEN
Magnetic tissue engineering is one of the rapidly emerging and promising directions of tissue engineering and biofabrication where the magnetic field is employed as temporal removal support or scaffold. Iron oxide nanoparticles are used to label living cells and provide the desired magnetic properties. Recently, polymer microcapsules loaded with iron oxide nanoparticles have been proposed as a novel approach to designing magnetic materials with high local concentrations. These microcapsules can be readily internalized and retained intracellularly for a long time in various types of cells. The low cytotoxicity of these microcapsules was previously shown in 2D cell culture. This paper has demonstrated that cells containing these nontoxic nanomaterials can form viable 3D tissue spheroids for the first time. The spheroids retained labeled fluorescent microcapsules with magnetic nanoparticles without a detectable cytotoxic effect. The high concentration of packed nanoparticles inside the microcapsules enables the evident magnetic properties of the labeled spheroids to be maintained. Finally, magnetic spheroids can be effectively used for magnetic patterning and biofabrication of tissue-engineering constructs.
Asunto(s)
Nanopartículas Magnéticas de Óxido de Hierro , Polímeros , Cápsulas , Campos Magnéticos , Ingeniería de TejidosRESUMEN
OBJECTIVE: Chondrospheres represent a variant of tissue spheroids biofabricated from chondrocytes. They are already being used in clinical trials for cartilage repair; however, their biomechanical properties have not been systematically investigated yet. The aim of our study was to characterize chondrospheres in long-term in vitro culture conditions for morphometric changes, biomechanical integrity, and their fusion and spreading kinetics. RESULTS: It has been demonstrated that the increase in chondrospheres secant modulus of elasticity is strongly associated with the synthesis and accumulation of extracellular matrix. Additionally, significant interplay has been found between biomechanical properties of tissue spheroids and their fusion kinetics in contrast to their spreading kinetics. CONCLUSIONS: Extracellular matrix is one of the main structural determinants of chondrospheres biomechanical properties during chondrogenic maturation in vitro. The estimation of tissue spheroids' physical behavior in vitro prior to operative treatment can be used to predict and potentially control fusogenic self-assembly process after implantation in vivo.
Asunto(s)
Condrocitos/citología , Condrogénesis/fisiología , Matriz Extracelular/fisiología , Esferoides Celulares/fisiología , Ingeniería de Tejidos , Fenómenos Biomecánicos , Células Cultivadas , Humanos , Técnicas In VitroRESUMEN
Cytoskeleton systems, actin microfilaments, microtubules (MTs) and intermediate filaments (IFs) provide the biomechanical stability and spatial organization in cells. To understand the specific contributions of each cytoskeleton systems to intrinsic properties of spheroids, we've scrutinized the effects of the cytoskeleton perturbants, cytochalasin D (Cyto D), nocodazole (Noc) and withaferin A (WFA) on fusion, spreading on adhesive surface, morphology and biomechanics of chondrospheres (CSs). We confirmed that treatment with Cyto D but not with Noc or WFA severely affected CSs fusion and spreading dynamics and significantly reduced biomechanical properties of cell aggregates. Noc treatment affected spheroids spreading but not the fusion and surprisingly enhanced their stiffness. Vimentin intermediate filaments (VIFs) reorganization affected CSs spreading only. The analysis of all three cytoskeleton systems contribution to spheroids intrinsic properties was performed for the first time.
Asunto(s)
Citoesqueleto , Filamentos Intermedios , Citoesqueleto de Actina , Microtúbulos , VimentinaRESUMEN
In traditional tissue engineering, synthetic or natural scaffolds are usually used as removable temporal support, which involves some biotechnology limitations. The concept of "scaffield" approach utilizing the physical fields instead of biomaterial scaffold has been proposed recently. In particular, a combination of intense magnetic and acoustic fields can enable rapid levitational bioassembly of complex-shaped 3D tissue constructs from tissue spheroids at low concentration of paramagnetic agent (gadolinium salt) in the medium. In the current study, the tissue spheroids from human bladder smooth muscle cells (myospheres) are used as building blocks for assembling the tubular 3D constructs. Levitational assembly is accomplished at low concentrations of gadolinium salts in the high magnetic field at 9.5 T. The biofabricated smooth muscle constructs demonstrate contraction after the addition of vasoconstrictive agent endothelin-1. Thus, hybrid magnetoacoustic levitational bioassembly is considered as a new technology platform in the emerging field of formative biofabrication. This novel technology of scaffold-free, nozzle-free, and label-free bioassembly opens a unique opportunity for rapid biofabrication of 3D tissue and organ constructs with complex geometry.
Asunto(s)
Ingeniería de Tejidos , Andamios del Tejido , Materiales Biocompatibles , Biotecnología , Humanos , Campos Magnéticos , Esferoides CelularesRESUMEN
Magnetic levitational bioassembly of three-dimensional (3D) tissue constructs represents a rapidly emerging scaffold- and label-free approach and alternative conceptual advance in tissue engineering. The magnetic bioassembler has been designed, developed, and certified for life space research. To the best of our knowledge, 3D tissue constructs have been biofabricated for the first time in space under microgravity from tissue spheroids consisting of human chondrocytes. Bioassembly and sequential tissue spheroid fusion presented a good agreement with developed predictive mathematical models and computer simulations. Tissue constructs demonstrated good viability and advanced stages of tissue spheroid fusion process. Thus, our data strongly suggest that scaffold-free formative biofabrication using magnetic fields is a feasible alternative to traditional scaffold-based approaches, hinting a new perspective avenue of research that could significantly advance tissue engineering. Magnetic levitational bioassembly in space can also advance space life science and space regenerative medicine.
RESUMEN
The existing methods of biofabrication for vascular tissue engineering are still bioreactor-based, extremely expensive, laborious and time consuming and, furthermore, not automated, which would be essential for an economically successful large-scale commercialization. The advances in nanotechnology can bring additional functionality to vascular scaffolds, optimize internal vascular graft surface and even help to direct the differentiation of stem cells into the vascular cell phenotype. The development of rapid nanotechnology-based methods of vascular tissue biofabrication represents one of most important recent technological breakthroughs in vascular tissue engineering because it dramatically accelerates vascular tissue assembly and, importantly, also eliminates the need for a bioreactor-based scaffold cellularization process.
Asunto(s)
Ingeniería Biomédica/métodos , Nanopartículas/química , Nanotecnología/métodos , Ingeniería de Tejidos/métodos , Animales , Materiales Biocompatibles/química , Vasos Sanguíneos/metabolismo , Técnicas de Cultivo de Célula , Colágeno/química , Elastina/química , Humanos , Magnetismo , Nanoestructuras/químicaRESUMEN
Tissue spheroids have been proposed as building blocks in 3D biofabrication. Conventional magnetic force-driven 2D patterning of tissue spheroids requires prior cell labeling by magnetic nanoparticles, meanwhile a label-free approach for 3D magnetic levitational assembly has been introduced. Here we present first time report on rapid assembly of 3D tissue construct using scaffold-free, nozzle-free and label-free magnetic levitation of tissue spheroids. Chondrospheres of standard size, shape and capable to fusion have been biofabricated from primary sheep chondrocytes using non-adhesive technology. Label-free magnetic levitation was performed using a prototype device equipped with permanent magnets in presence of gadolinium (Gd3+) in culture media, which enables magnetic levitation. Mathematical modeling and computer simulations were used for prediction of magnetic field and kinetics of tissue spheroids assembly into 3D tissue constructs. First, we used polystyrene beads to simulate the assembly of tissue spheroids and to determine the optimal settings for magnetic levitation in presence of Gd3+. Second, we proved the ability of chondrospheres to assemble rapidly into 3D tissue construct in the permanent magnetic field in the presence of Gd3+. Thus, scaffold- and label-free magnetic levitation of tissue spheroids is a promising approach for rapid 3D biofabrication and attractive alternative to label-based magnetic force-driven tissue engineering.
Asunto(s)
Técnicas de Cultivo de Célula/instrumentación , Campos Magnéticos , Ingeniería de Tejidos/instrumentación , Animales , Condrocitos/citología , Simulación por Computador , Diseño de Equipo , Esferoides Celulares/citologíaRESUMEN
Polymer trileaflet valves offer natural hemodynamics with the potential for better durability than commercially available tissue valves. Strength and durability of polymer-based valves may be increased through fiber reinforcement. A finite element analysis of the mechanics of a statically loaded polymer trileaflet aortic heart valve has been conducted. A parametric analysis was performed to determine the effects of fiber orientation and volume density in a single and double ply model. A maximum stress value of 1.02MPa was obtained in the non-reinforced model for a transvalvular load (downstream-upstream) of 120mmHg. The maximum stress on the downstream side of the leaflet was approximately twice the maximum stress on the upstream side, and always occurred on the interface with the valve stent. The single ply model reduced the stress on the polymer matrix, with the maximum reduction of at least 64% occurring when the fiber orientation was such that the fibers ran perpendicular to the stent edge. The double ply model further reduced the stress on the polymer matrix, with the maximum reduction of greater than 86% now occurring when the fibers are oriented most perpendicular to one another.
Asunto(s)
Fenómenos Biomecánicos , Prótesis Valvulares Cardíacas , Simulación por Computador , Análisis de Elementos Finitos , Hemorreología , Modelos Anatómicos , Estrés MecánicoRESUMEN
The morphological and biomechanical peculiarities of the rectum observed in obstructed defecation syndrome (ODS) are not completely understood. The biomechanical properties and morphological features of the rectum in patients with ODS in correlation with the status of the enteric nervous system (ENS) were evaluated. Uniaxial tensile tests on the rectum samples of patients with ODS and controls were performed; collagenous constituents were assessed by Reticulin and Masson's trichrome stainings; the expressions of α-smooth muscle actin (α-SMA), S100 and CD117 labeling of interstitial cells of Cajal (ICCs) were investigated by immunohistochemistry. In both groups, the ultimate stress in the posterior rectal wall was statistically significantly higher compared to the anterior one. The ultimate strain was higher in ODS compared to controls. The tangential modulus of elasticity was significantly higher in the control group than in the ODS one, both in the anterior and posterior walls. A significantly higher density of collagen demonstrated throughout the wall was evidenced in controls compared to ODS. The mucosal muscular compartment was significantly thicker but more disorganized in the patients group. The enteric S100-positive glial cells were significantly reduced in number in the anterior wall, but elevated in the posterior wall of the rectum in ODS simultaneously demonstrating the higher numbers of ICCs within the entire muscular layer and myenteric. The biomechanical and morphological results show that the rectal wall in patients with ODS is more deformable and less rigid compared to controls. The results of biomechanical properties and morphological changes in the human rectum are essential when choosing the method of ODS treatment.
Asunto(s)
Defecación/fisiología , Inmunohistoquímica/métodos , Recto/patología , Femenino , Humanos , MasculinoRESUMEN
Chemical stabilization resulting in increased resistance to proteolytic degradation is one of the approaches in prevention of post-implantational aneurysm development in decellularized natural vascular scaffolds. Recently, tannic acid (TA) and tannic acid mimicking dendrimers (TAMD) have been suggested as potential stabilization agents for collagen and elastin. The aim of this work was to determine the stabilizing effects of TAMD on decellularized natural scaffolds. Vascular scaffolds fabricated from small intestine submucosa (SIS) and SIS plane sheets (Cook Biotech Inc.) were used. The biomechanical properties of the SIS vascular graft segments treated with TA and TAMD were tested. The effect of TAMD treatment on resistance to proteolytic degradation was evaluated by measuring biomechanical properties of TAMD stabilized and non-stabilized SIS specimens after incubation in collagenase solution. It was shown that treatment with TA as well as with TAMD increased the strength of tubular SIS as well as their resistance to proteolytic biodegradation manifested by preservation of biomechanical properties after collagenase treatment. Transmission electron microscopy demonstrated that treatment with TAMD increased the periodical pattern typical of collagen fiber ultrastructure as a result of the "mordant" effect. The possible collagen cross-linking effect of TAMD on SIS was investigated by differential scanning calorimetry (DSC). The treatment with TAMD induced a small, but detectable cross-linking effect, suggesting that TAMD do not establish extensive covalent cross links within the extracellular matrix but rather interact with collagen, thus rendering SIS scaffolds more resistant to proteolytic degradation.
Asunto(s)
Dendrímeros/química , Dendrímeros/farmacología , Intestino Delgado/efectos de los fármacos , Nanoestructuras/química , Taninos/química , Taninos/farmacología , Aneurisma/prevención & control , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Rastreo Diferencial de Calorimetría , Colágeno/metabolismo , Colagenasas/metabolismo , Elasticidad , Elastina/metabolismo , Temperatura , Trasplantes/efectos adversosRESUMEN
A novel polyolefin, poly(styrene-b-isobutylene-b-styrene) (Quatromer), is being proposed as a viable polymer for use in trileaflet heart valves because of its oxidative stability. The current study was designed to assess the polymer's hemocompatibility and mechanical durability. Mechanical characterization included static tensile tests and dynamic tension-tension and bending fatigue tests, where the properties of isotropic and composite (polypropylene (PP) embedded) Quatromer specimens were compared with those of a polyurethane (PUR) approved for cardiovascular applications. It was found that by embedding PP fibers into the Quatromer matrix, the tensile and fatigue properties of the polymer could be improved, making them comparable, if not better than the PUR. The thrombotic potential of Quatromer was compared with the PUR, glutaraldehyde-fixed porcine valve material, and a positive and negative control by measuring platelet deposition with radiolabeled platelets in a parallel plate flow configuration. The porcine valve material was found to have significantly higher platelet deposition under all flow regimes, while no significant difference existed between Quatromer and PUR. In conclusion, Quatromer is shown to have suitable hemocompatibility and mechanical durability for use in polymer trileaflet heart valves, and fiber reinforcement can effectively be used to tailor the mechanical properties.
Asunto(s)
Materiales Biocompatibles , Prótesis Valvulares Cardíacas , Estirenos , Animales , Plaquetas , Humanos , Ensayo de Materiales , PorcinosRESUMEN
Tissue engineering is a fast-evolving field of biomedical science and technology with future promise to manufacture living tissues and organs for replacement, repair, and regeneration of diseased organs. Owing to the specific role of hemodynamics in the development, maintenance, and functioning of the cardiovascular system, bioreactors are a fundamental of cardiovascular tissue engineering. The development of perfusion bioreactor technology for cardiovascular tissue engineering is a direct sequence of previous historic successes in extracorporeal circulation techniques. Bioreactors provide a fluidic environment for tissue engineered tissue and organs, and guarantee their viability, maturation, biomonitoring, testing, storage, and transportation. There are different types of bioreactors and they vary greatly in their size, complexity, and functional capabilities. Although progress in design and functional properties of perfusion bioreactors for tissue engineered blood vessels, heart valves, and myocardial patches is obvious, there are some challenges and insufficiently addressed issues, and room for bioreactor design improvement and performance optimization. These challenges include creating a triple perfusion bioreactor for vascularized tubular tissue engineered cardiac construct; designing and manufacturing fluidics-based perfused minibioreactors; incorporation of systematic mathematical modeling and computer simulation based on computational fluid dynamics into the bioreactor designing process; and development of automatic systems of hydrodynamic regime control. Designing and engineering of built-in noninvasive biomonitoring systems is another important challenge. The optimal and most efficient perfusion and conditioning regime, which accelerates tissue maturation of tissue-engineered constructs also remains to be determined. This is a first article in a series of reviews on critical elements of cardiovascular tissue engineering technology describing the current status, unsolved problems, and challenges of bioreactor technology in cardiovascular tissue engineering and outlining future trends and developments.
Asunto(s)
Reactores Biológicos , Procedimientos Quirúrgicos Cardiovasculares/instrumentación , Ingeniería de Tejidos/métodos , Diseño de Equipo , Humanos , Perfusión , Ingeniería de Tejidos/instrumentaciónRESUMEN
Adipose stem cells (ASCs) spheroids show enhanced regenerative effects compared to single cells. Also, spheroids have been recently introduced as building blocks in directed self-assembly strategy. Recent efforts aim to improve long-term cell retention and integration by the use of microencapsulation delivery systems that can rapidly integrate in the implantation site. Interlockable solid synthetic microscaffolds, so called lockyballs, were recently designed with hooks and loops to enhance cell retention and integration at the implantation site as well as to support spheroids aggregation after transplantation. Here we present an efficient methodology for human ASCs spheroids biofabrication and lockyballs cellularization using micro-molded non-adhesive agarose hydrogel. Lockyballs were produced using two-photon polymerization with an estimated mechanical strength. The Young's modulus was calculated at level 0.1362 +/-0.009 MPa. Interlocking in vitro test demonstrates high level of loading induced interlockability of fabricated lockyballs. Diameter measurements and elongation coefficient calculation revealed that human ASCs spheroids biofabricated in resections of micro-molded non-adhesive hydrogel had a more regular size distribution and shape than spheroids biofabricated in hanging drops. Cellularization of lockyballs using human ASCs spheroids did not alter the level of cells viability (p > 0,999) and gene fold expression for SOX-9 and RUNX2 (p > 0,195). The biofabrication of ASCs spheroids into lockyballs represents an innovative strategy in regenerative medicine, which combines solid scaffold-based and directed self-assembly approaches, fostering opportunities for rapid in situ biofabrication of 3D building-blocks.