Unconventional Imaging Methods to Capture Transient Structures during Actomyosin Interaction.

Half a century has passed since the cross-bridge structure was recognized as the molecular machine that generates muscle tension. Despite various approaches by a number of scientists, information on the structural changes in the myosin heads, particularly its transient configurations, remains scant even now, in part because of their small size and rapid stochastic movements during the power stroke. Though progress in cryo-electron microscopy is eagerly awaited as the ultimate means to elucidate structural details, the introduction of some unconventional methods that provide high-contrast raw images of the target protein assemblies is quite useful, if available, to break the current impasse. Quick-freeze deep⁻etch⁻replica electron microscopy coupled with dedicated image analysis procedures, and high-speed atomic-force microscopy are two such candidates. We have applied the former to visualize actin-associated myosin heads under in vitro motility assay conditions, and found that they take novel configurations similar to the SH1⁻SH2-crosslinked myosin that we characterized recently. By incorporating biochemical and biophysical results, we have revised the cross-bridge mechanism to involve the new conformer as an important main player. The latter “microscopy” is unique and advantageous enabling continuous observation of various protein assemblies as they function. Direct observation of myosin-V’s movement along actin filaments revealed several unexpected behaviors such as foot-stomping of the leading head and unwinding of the coiled-coil tail. The potential contribution of these methods with intermediate spatial resolution is discussed.

Structural Study of MPN387, an Essential Protein for Gliding Motility of a Human-Pathogenic Bacterium, Mycoplasma pneumoniae.

UNLABELLED: Mycoplasma pneumoniae is a human pathogen that glides on host cell surfaces with repeated catch and release of sialylated oligosaccharides. At a pole, this organism forms a protrusion called the attachment organelle, which is composed of surface structures, including P1 adhesin and the internal core structure. The core structure can be divided into three parts, the terminal button, paired plates, and bowl complex, aligned in that order from the front end of the protrusion. To elucidate the gliding mechanism, we focused on MPN387, a component protein of the bowl complex which is essential for gliding but dispensable for cytadherence. The predicted amino acid sequence showed that the protein features a coiled-coil region spanning residue 72 to residue 290 of the total of 358 amino acids in the protein. Recombinant MPN387 proteins were isolated with and without an enhanced yellow fluorescent protein (EYFP) fusion tag and analyzed by gel filtration chromatography, circular dichroism spectroscopy, analytical ultracentrifugation, partial proteolysis, and rotary-shadowing electron microscopy. The results showed that MPN387 is a dumbbell-shaped homodimer that is about 42.7 nm in length and 9.1 nm in diameter and includes a 24.5-nm-long central parallel coiled-coil part. The molecular image was superimposed onto the electron micrograph based on the localizing position mapped by fluorescent protein tagging. A proposed role of this protein in the gliding mechanism is discussed. IMPORTANCE: Human mycoplasma pneumonia is caused by a pathogenic bacterium, Mycoplasma pneumoniae This tiny, 2-µm-long bacterium is suggested to infect humans by gliding on the surface of the trachea through binding to sialylated oligosaccharides. The mechanism underlying mycoplasma "gliding motility" is not related to any other well-studied motility systems, such as bacterial flagella and eukaryotic motor proteins. Here, we isolated and analyzed the structure of a key protein which is directly involved in the gliding mechanism.

Novel configuration of a myosin II transient intermediate analogue revealed by quick-freeze deep-etch replica electron microscopy.

In the present paper, we described our attempt to characterize the rough three-dimensional features of the structural analogue of the key intermediate of myosin's cross-bridge cycle. Using quick-freeze deep-etch replica electron microscopy, we observed that actin-attached myosin during in vitro sliding was bent superficially as postulated by the conventional hypothesis, but in the opposite direction of the putative pre-power-stroke configuration, as for ADP·Vi (inorganic vanadate)-bound myosin. We searched for the conformational species with a similar appearance and found that SH1-SH2 (thiols 1 and 2)-cross-linked myosin is a good candidate. To characterize such small asymmetric structures, we employed a new pattern-recognition procedure that accommodates the metal-replicated samples. In this method, the best-matched views of the target microscopic images were selected from a comprehensive set of images simulated from known atomic co-ordinates of relevant proteins. Together with effective morphological filtering, we could define the conformational species and the view angles of the catalytic domain and the lever arm cropped from averaged images of disulfide-cross-linked myosin. Whereas the catalytic domain of the new conformer closely resembled the pPDM (N,N'-p-phenylenedimaleimide)-treated, but SH2 Lys705-cross-linked, structure (PDB code 1L2O), a minor product of the same cross-linking reaction, the lever arm projected differently. Using separately determined view angles of the catalytic domain and the lever arm, we built a model of disulfide-cross-linked myosin. Further combination with the 'displacement-mapping' procedure enabled us to reconstruct the global three-dimensional envelope of the unusual structure whose lever arm orientation is compatible with our reports on the actin-sliding cross-bridge structure. Assuming this conformer as the structural analogue of the transient intermediate during actin sliding, the power stroke of the lever arm might accompany the reversal of the disorganized SH1 helix.

Filamentous structures in the cell envelope are associated with bacteroidetes gliding machinery.

Many bacteria belonging to the phylum Bacteroidetes move on solid surfaces, called gliding motility. In our previous study with the Bacteroidetes gliding bacterium Flavobacterium johnsoniae, we proposed a helical loop track model, where adhesive SprB filaments are propelled along a helical loop on the cell surface. In this study, we observed the gliding cell rotating counterclockwise about its axis when viewed from the rear to the advancing direction of the cell and revealed that one labeled SprB focus sometimes overtook and passed another SprB focus that was moving in the same direction. Several electron microscopic analyses revealed the presence of a possible multi-rail structure underneath the outer membrane, which was associated with SprB filaments and contained GldJ protein. These results provide insights into the mechanism of Bacteroidetes gliding motility, in which the SprB filaments are propelled along tracks that may form a multi-rail system underneath the outer membrane. The insights may give clues as to how the SprB filaments get their driving force.

Fractal dimension analysis and mathematical morphology of structural changes in actin filaments imaged by electron microscopy.

In this work, we examined structural changes of actin filaments interacting with myosin visualized by quick freeze deep-etch replica electron microscopy (EM) by using a new method of image processing/analysis based on mathematical morphology. In order to quantify the degree of structural changes, two characteristic patterns were extracted from the EM images. One is the winding pattern of the filament shape (WP) reflecting flexibility of the filament, and the other is the surface pattern of the filament (SP) reflecting intra-molecular domain-mobility of actin monomers constituting the filament. EM images were processed by morphological filtering followed by box-counting to calculate the fractal dimensions for WP (D(WP)) and SP (D(SP)). The result indicates that D(WP) was larger than D(SP) irrespective of the state of the filament (myosin-free or bound) and that both parameters for myosin-bound filaments were significantly larger than those for myosin-free filaments. Overall, this work provides the first quantitative insight into how conformational disorder of actin monomers is correlated with the myosin-induced increase in flexibility of actin filaments along their length as suggested by earlier studies with different techniques. Our method is yet to be improved in details, but promising as a powerful tool for studying the structural change of protein molecules and their assemblies, which can potentially be applied to a wide range of biological and biomedical images.

Electron microscopic evidence for the myosin head lever arm mechanism in hydrated myosin filaments using the gas environmental chamber.

Muscle contraction results from an attachment-detachment cycle between the myosin heads extending from myosin filaments and the sites on actin filaments. The myosin head first attaches to actin together with the products of ATP hydrolysis, performs a power stroke associated with release of hydrolysis products, and detaches from actin upon binding with new ATP. The detached myosin head then hydrolyses ATP, and performs a recovery stroke to restore its initial position. The strokes have been suggested to result from rotation of the lever arm domain around the converter domain, while the catalytic domain remains rigid. To ascertain the validity of the lever arm hypothesis in muscle, we recorded ATP-induced movement at different regions within individual myosin heads in hydrated myosin filaments, using the gas environmental chamber attached to the electron microscope. The myosin head were position-marked with gold particles using three different site-directed antibodies. The amplitude of ATP-induced movement at the actin binding site in the catalytic domain was similar to that at the boundary between the catalytic and converter domains, but was definitely larger than that at the regulatory light chain in the lever arm domain. These results are consistent with the myosin head lever arm mechanism in muscle contraction if some assumptions are made.

New versatile staining reagents for biological transmission electron microscopy that substitute for uranyl acetate.

Aqueous uranyl acetate has been extensively used as a superb staining reagent for transmission electron microscopy of biological materials. However, recent regulation of nuclear fuel material severely restricts its use even for purely scientific purposes. Since uranyl salts are hazardous due to biological toxicity and remaining radioactivity, development of safe and non-radioactive substitutes is greatly anticipated. We examined two lanthanide salts, samarium triacetate and gadolinium triacetate, and found that 1-10% solution of these reagents was safe but still possess excellent capability for staining thin sections of plastic-embedded materials of animal and plant origin. Although post-fixation with osmium tetroxide was essential for high-contrast staining, post-staining with lead citrate could be eliminated if a slow-scan CCD camera is available for observation. These lanthanide salts can also be utilized as good negative-staining reagents to study supramolecular architecture of biological macromolecules. They were not as effective as a fixative of protein assembly, reflecting the non-hazardous nature of the reagents.

One-dimensional Brownian motion of charged nanoparticles along microtubules: a model system for weak binding interactions.

Various proteins are known to exhibit one-dimensional Brownian motion along charged rodlike polymers, such as microtubules (MTs), actin, and DNA. The electrostatic interaction between the proteins and the rodlike polymers appears to be crucial for one-dimensional Brownian motion, although the underlying mechanism has not been fully clarified. We examined the interactions of positively-charged nanoparticles composed of polyacrylamide gels with MTs. These hydrophilic nanoparticles bound to MTs and displayed one-dimensional Brownian motion in a charge-dependent manner, which indicates that nonspecific electrostatic interaction is sufficient for one-dimensional Brownian motion. The diffusion coefficient decreased exponentially with an increasing particle charge (with the exponent being 0.10 kBT per charge), whereas the duration of the interaction increased exponentially (exponent of 0.22 kBT per charge). These results can be explained semiquantitatively if one assumes that a particle repeats a cycle of binding to and movement along an MT until it finally dissociates from the MT. During the movement, a particle is still electrostatically constrained in the potential valley surrounding the MT. This entire process can be described by a three-state model analogous to the Michaelis-Menten scheme, in which the two parameters of the equilibrium constant between binding and movement, and the rate of dissociation from the MT, are derived as a function of the particle charge density. This study highlights the possibility that the weak binding interactions between proteins and rodlike polymers, e.g., MTs, are mediated by a similar, nonspecific charge-dependent mechanism.

Application of spherical substrate to observe bacterial motility machineries by Quick-Freeze-Replica Electron Microscopy.

3-D Structural information is essential to elucidate the molecular mechanisms of various biological machineries. Quick-Freeze Deep-Etch-Replica Electron Microscopy is a unique technique to give very high-contrast surface profiles of extra- and intra-cellular apparatuses that bear numerous cellular functions. Though the global architecture of those machineries is primarily required to understand their functional features, it is difficult or even impossible to depict side- or highly-oblique views of the same targets by usual goniometry, inasmuch as the objects (e.g. motile microorganisms) are placed on conventional flat substrates. We introduced silica-beads as an alternative substrate to solve such crucial issue. Elongated Flavobacterium and globular Mycoplasmas cells glided regularly along the bead's surface, similarly to those on a flat substrate. Quick-freeze replicas of those cells attached to the beads showed various views; side-, oblique- and frontal-views, enabling us to study not only global but potentially more detailed morphology of complicated architecture. Adhesion of the targets to the convex surface could give surplus merits to visualizing intriguing molecular assemblies within the cells, which is relevant to a variety of motility machinery of microorganisms.

A novel "ghost"-free tomographic image reconstruction method applicable to rotary-shadowed replica specimens.

Electron tomography by conventional filtered back-projection is often seriously impaired by anisotropic resolution due to unavoidable limitation in specimen tilt-angles. We propose a new approach to overcome the problem for thin film-like replica-type specimens in which internal density is supposed as homogenous and contiguously distributed, by imposing a reasonable constraint of density-existing region in the reconstruction procedure. The objects were approximated as a distribution of binary voxels and the intensity of the projected images being proportional to the thickness along the projection ray. The new reconstruction algorithm consists of initial determination of approximate constraint region by a topographic analysis by stereo-photogrammetry, followed by iterative computation to find the unique solution of simultaneous equations, so that all the intensity distribution in tilt-series images are included within pre-determined voxel arrangement. During a trial run with a new methodology, we realized its significantly advantageous feature that much less number of projection images than conventional back-projection is required to perform the reconstruction of almost equivalent quality. Here, we show the performance of this novel algorithm by 3-D reconstruction of quick-freeze deep-etch replica specimens without any trace of spurious ghosting caused by missing-wedge problems.

A procedure to analyze surface profiles of the protein molecules visualized by quick-freeze deep-etch replica electron microscopy.

Quick-freeze deep-etch replica electron microscopy gives high contrast snapshots of individual protein molecules under physiological conditions in vitro or in situ. The images show delicate internal pattern, possibly reflecting the rotary-shadowed surface profile of the molecule. As a step to build the new system for the "Structural analysis of single molecules", we propose a procedure to quantitatively characterize the structural property of individual molecules; e.g. conformational type and precise view-angle of the molecules, if the crystallographic structure of the target molecule is available. This paper presents a framework to determine the observed face of the protein molecule by analyzing the surface profile of individual molecules visualized in freeze-replica specimens. A comprehensive set of rotary-shadowed views of the protein molecule was artificially generated from the available atomic coordinates using light-rendering software. Exploiting new mathematical morphology-based image filter, characteristic features were extracted from each image and stored as template. Similar features were extracted from the true replica image and the most likely projection angle and the conformation of the observed particle were determined by quantitative comparison with a set of archived images. The performance and the robustness of the procedure were examined with myosin head structure in defined configuration for actual application.

High-performance purification of gelsolin from plasma using anion-exchange porous hollow-fiber membrane.

Gelsolin was purified from bovine plasma using an anion-exchange porous hollow-fiber membrane. The anion-change porous hollow-fiber membrane was prepared by radiation-induced graft polymerization of an epoxy-group-containing monomer, glycidyl methacrylate, and subsequent chemical modifications. Some of the epoxy groups of the polymer chain grafted onto the pore surface were converted into diethylamino groups, and the remaining epoxy groups were converted into 2-hydroxyethylamino groups. First, a gelsolin-containing dialyzed protein solution, prepared by pretreatments of ammonium sulfate precipitation and dialysis of plasma, was forced to permeate through the pores of an anion-exchange porous hollow-fiber membrane. Various proteins including gelsolin were adsorbed onto the anion-exchange polymer brush at a high rate with negligible diffusional mass-transfer resistance. Second, adsorbed gelsolin was specifically eluted by permeating 2mM calcium chloride. The amount of recovered gelsolin was 0.1 mg per 1 mL of plasma. Third, the remaining adsorbed proteins were quantitatively eluted with 1M sodium chloride, leading to a constant amount of recovered gelsolin during four cycles of purification. The total time required for gelsolin purification from 30 mL of bovine plasma was 11h, during which the time for selective adsorption of various proteins and affinity elution of gelsolin using the anion-exchange porous hollow-fiber membrane was 20 min.

Cofilin-induced unidirectional cooperative conformational changes in actin filaments revealed by high-speed atomic force microscopy.

High-speed atomic force microscopy was employed to observe structural changes in actin filaments induced by cofilin binding. Consistent with previous electron and fluorescence microscopic studies, cofilin formed clusters along actin filaments, where the filaments were 2-nm thicker and the helical pitch was ~25% shorter, compared to control filaments. Interestingly, the shortened helical pitch was propagated to the neighboring bare zone on the pointed-end side of the cluster, while the pitch on the barbed-end side was similar to the control. Thus, cofilin clusters induce distinctively asymmetric conformational changes in filaments. Consistent with the idea that cofilin favors actin structures with a shorter helical pitch, cofilin clusters grew unidirectionally toward the pointed-end of the filament. Severing was often observed near the boundaries between bare zones and clusters, but not necessarily at the boundaries.

Interaction of myosin.ADP.fluorometal complexes with fluorescent probes and direct observation using quick-freeze deep-etch electron microscopy.

Myosin forms stable ternary complexes with ADP and phosphate analogues of fluorometals that mimic different ATPase reaction intermediates corresponding to each step of the cross-bridge cycle. In the present study, we monitored the formation of ternary complexes of myosin.ADP.fluorometal using the fluorescence probe prodan. It has been reported that the fluorescence changes of the probe reflect the formation of intermediates in the ATPase reaction [Hiratsuka (1998) Biochemistry 37, 7167-7176]. Prodan bound to skeletal muscle heavy-mero-myosin (HMM).ADP.fluorometal, with each complex showing different fluorescence spectra. Prodan bound to the HMM.ADP.BeFn complex showed a slightly smaller red-shift than other complexes in the presence of ATP, suggesting a difference in the localized conformation or a difference in the population of BeFn species of global shape. We also examined directly the global structure of the HMM.ADP.fluorometal complexes using quick-freeze deep-etch replica electron microscopy. The HMM heads in the absence of nucleotides were mostly straight and elongated. In contrast, the HMM heads of ternary complexes showed sharply kinked or rounded configurations as seen in the presence of ATP. This is the first report of the direct observation of myosin-ADP-fluorometal ternary complexes, and the results suggest that these complexes indeed mimic the shape of the myosin head during ATP hydrolysis.

3-D structural analysis of the crucial intermediate of skeletal muscle myosin and its role in revised actomyosin cross-bridge cycle.

Skeletal myosin S1 consists of two functional segments, a catalytic-domain and a lever-arm. Since the crystal structure of ADP/Vi-bound S1 exhibits a strong intramolecular flexure between two segments, inter-conversion between bent and extended forms; i.e. "tilting of the lever-arm" has been accepted as the established molecular mechanism of skeletal muscle contraction. We utilized quick-freeze deep-etch replica electron microscopy to directly visualize the structure of in vitro actin-sliding myosin, and found the existence of a novel oppositely-bent configuration, instead of the expected ADP/Vi-bound form. We also noticed that SH1-SH2 cross-linked myosin gives an aberrant appearance similar to the above structure. Since SH1-SH2-cross-linked myosin is a well-studied analogue of the transient intermediate of the actomyosin cross-bridge cycle, we devised a new image-processing procedure to define the relative view-angles between the catalytic-domain and the lever-arm from those averaged images, and built a 3-D model of the new conformer. The lever-arm in that model was bent oppositely to the ADP/Vi-bound form, in accordance with observed actin-sliding cross-bridge structure. Introducing this conformer as the crucial intermediate that transiently appears during sliding, we propose a revised scheme of the cross-bridge cycle. In the scenario, the novel conformer keeps actin-binding in two different modes until it forms a primed configuration. The final extension of the lever-arm back to the original rigor-state constitutes the "power-stroke". Various images observed during sliding could be easily interpreted by the new conformer. Even the enigmatic behavior of the cross-bridges reported as "loose chemo-mechanical coupling" might be adequately explained under some assumptions.

Kinesin-Calmodulin fusion protein as a molecular shuttle.

In this study, we developed a molecular shuttle with reversible cargo-loading system by using calmodulin (CaM) and M13 peptide. We designed a kinesin (K560) chimera protein with CaM fused at the C-terminal tail region of K560 (K560-CaM). K560-CaM was expressed using an Escherichia coli expression system and purified. Its ATPase activity and microtubule gliding velocity were almost in a similar range as those of the wild-type kinesin. Ca(2+)-dependent reversible binding of K560-CaM and M13 peptide was monitored by size-exclusion-HPLC. Rotary shadowing and electron microscopy revealed tetrameric configuration of K560-CaM in the absence of Ca(2+), while both dimeric and tetrameric configurations in the presence of Ca(2+). Further, Ca(2+)-dependent change in the configuration of K560-CaM was monitored by size-exclusion-HPLC and analytical ultracentrifugation. Finally, by total internal reflection fluorescence microscopy, we successfully observed that K560-CaM transported quantum dot-conjugated M13 peptide along the microtubule in the presence of Ca(2+).

Cargo-binding makes a wild-type single-headed myosin-VI move processively.

Class VI myosin is an intracellular vesicle and organelle transporter that moves along actin filaments in a direction opposite to most other known myosin classes. The myosin-VI was expected to form a dimer to move processively along actin filaments with a hand-over-hand mechanism like other myosin organelle transporters. Recently, however, wild-type myosin-VI was demonstrated to be monomer and single-headed, casting a doubt on its processivity. By using single molecule techniques, we show that green-fluorescent-protein-tagged single-headed, wild-type myosin-VI does not move processively. However, when coupled to 200-nm polystyrene beads (comparable to intracellular vesicles in size) at a ratio of one head per bead, single-headed myosin-VI moves processively with large (40-nm) steps. The characteristics of this monomer-driven movement were different to that of artificial dimer-driven movement: Compared to the artificial dimer, the monomer-bead complex had a reduced stall force (1 pN compared to 2 pN), an average run length 2.5-fold shorter (91 nm compared to 220 nm) and load-dependent step size. Furthermore, we found that a monomer-bead complex moved more processively in a high viscous solution (40-fold higher than water) similar to cellular environment. Because the diffusion constant of the bead is 60-fold lower than myosin-VI heads alone in water, we propose a model in which the bead acts as a diffusional anchor for the myosin-VI, enhancing its rebinding following detachment and supporting processive movement of the bead-monomer complexes. Although a single-headed myosin-VI was able to move processively with a large cargo, the travel distance was rather short. Multiple molecules may be involved in the cargo transport for a long travel distance in cells.

Shigella Spa33 is an essential C-ring component of type III secretion machinery.

Type III secretion machinery (TTSM), composed of a needle, a basal body, and a C-ring compartment, delivers a subset of effectors into host cells. Here, we show that Shigella Spa33 is an essential component of the C-ring compartment involved in mediating the transit of various TTSM-associated translocated proteins. Electron microscopic analysis and pull-down assay revealed Spa33 to be localized beneath the TTSM via interaction with MxiG and MxiJ (basal body components). Spa33 is also capable of interacting with Spa47 (TTSM ATPase), MxiK, MxiN (required for the transit of MxiH, the needle component), Spa32 (required for determining needle length), and several effectors. Genetic and functional analyses of the Spa33 C-terminal region, which is highly conserved in the SpaO-YscQ-HrcQ(B)-FliN family, indicate that some of the conserved residues are crucial for needle formation via interactions with MxiN. Thus, Spa33 plays a central role as the C-ring component in recruiting/exporting TTSM-associated proteins.