Development and evaluation of Artemisia vulgaris mucilage based polymeric network for controlled drug delivery.

The present study was conducted to fabricate and compare pH-sensitive polymeric networks of Artemisia vulgaris- Methacrylic acid using free radical polymerization conventional method and microwave-assisted method. Potassium persulphate and N' N'- Methylene bisacrylamide were employed as an initiator-crosslinker system. Swelling studies were performed at pH 1.2, 4.5, 6.8 and 7.4. Concentrations of polymer and monomer along with radiation dose were optimized as a function of swelling. Porosity and gel fraction were calculated for all samples. FTIR study confirmed the formation of cross-linked networks. Results of SEM indicated that the microwave irradiated polymeric network had a more porous structure. DSC and XRD study indicated the entrapment of drug inside the polymeric networks in amorphous form. In comparison to the conventional method, the polymeric network prepared by the microwave-assisted method exhibited high swelling ratios, porosity, thermal stability and drug release. These results signify microwave radiations as an effective alternative to the conventional heating method.

i-Propylammonium Lead Chloride Based Perovskite Photocatalysts for Depolymerization of Lignin Under UV Light.

Lignin depolymerization for the purpose of synthesizing aromatic molecules is a growing focus of research to find alternative energy sources. In current studies, the photocatalytic depolymerization of lignin has been investigated by two new iso-propylamine-based lead chloride perovskite nanomaterials (SK9 and SK10), synthesized by the facile hydrothermal method. Characterization was done by Powder X-Ray Diffraction (PXRD), Scanning Electron Microscopy (SEM), UV-Visible (UV-Vis), Photoluminescence (PL), and Fourier-Transform Infrared (FTIR) Spectroscopy and was used for the photocatalytic depolymerization of lignin under UV light. Lignin depolymerization was monitored by taking absorption spectra and catalytic paths studied by applying kinetic models. The %depolymerization was calculated for factors such as catalyst dose variation, initial concentration of lignin, and varying temperatures. Pseudo-second order was the best suited kinetic model, exhibiting a mechanism for lignin depolymerization that was chemically rate controlled. The activation energy (Ea) for the depolymerization reaction was found to be 15 kJ/mol, which is remarkably less than conventional depolymerization of the lignin, i.e., 59.75 kJ/mol, exhibiting significant catalytic efficiencies of synthesized perovskites. Products of lignin depolymerization obtained after photocatalytic activity at room temperature (20 °C) and at 90 °C were characterized by GC-MS analysis, indicating an increase in catalytic lignin depolymerization structural subunits into small monomeric functionalities at higher temperatures. Specifically, 2-methoxy-4-methylphenol (39%), benzene (17%), phenol (10%) and catechol (7%) were detected by GC-MS analysis of lignin depolymerization products.

First-Principles Investigations of Novel Guanidine-Based Dyes.

In the pursuit of finding efficient D-π-A organic dyes as photosensitizers for dye-sensitized solar cells (DSSCs), first-principles calculations of guanidine-based dyes [A1-A18] were executed using density functional theory (DFT). The various electronic and optical properties of guanidine-based organic dyes with different D-π-A structural modifications were investigated. The structural modification of guanidine-based dyes largely affects the properties of molecules, such as excitation energies, the oscillator strength dipole moment, the transition dipole moment, and light-harvesting efficiencies. The energy gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) is responsible for the reduction and injection of electrons. Modification of the guanidine subunit by different structural modifications gave a range of HOMO-LUMO energy gaps. Chemical and optical characteristics of the dyes indicated prominent charge transfer and light-harvesting efficiencies. The wide electronic absorption spectra of these guanidine-based dyes computed by TD-DFT-B3LYP with 6-31G, 6-311G, and cc-PVDZ basis sets have been observed in the visible region of spectra due to the presence of chromophore groups of dye molecules. Better anchorage of dyes to the surface of TiO2 semiconductors helps in charge-transfer phenomena, and the results suggested that -COOH, -CN, and -NO2 proved to be proficient anchoring groups, making dyes very encouraging candidates for DSSCs. Molecular electrostatic potential explained the electrostatic potential of organic dyes, and IR spectrum and conformational analyses ensured the suitability of organic dyes for the fabrication of DSSCs.

Removal of As(V) and Cr(VI) with Low-Cost Novel Virgin and Iron-Impregnated Banana Peduncle-Activated Carbons.

This work reports the investigation of activated carbons from virgin banana peduncle (ZR1) and iron-impregnated banana peduncle (ZR2) as adsorbents for the removal of As(V) and Cr(VI) ions from aqueous solutions. Both adsorbents were characterized through the point of zero charge, powder X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray, Brunauer-Emmett-Teller, and Fourier transform infrared spectroscopic techniques. The effects of initial pH, contact time, temperature, and initial concentration on metal ion adsorption were investigated. Adsorbents existed as both crystalline and amorphous species having homogeneous surface cavities and surface area of 749.73 and 369.66 m2/g for ZR1 and ZR2, respectively. The maximum As(V) removal of 79.32 and 69.08% was obtained using ZR1 and ZR2, respectively, whereas the maximum Cr(VI) removal was calculated as 69.73% for ZR1 and 73.78% for ZR2. Kinetic modeling data were found to be best fitted for the pseudo-second-order reaction, and rate constants were calculated. The theoretical adsorption capacities (q m) of ZR1 and ZR2 were calculated through Langmuir and Freundlich models. The maximum As(V) adsorption capacities calculated for ZR1 and ZR2 were 13.33 and 9.066 mg/g, respectively, whereas the maximum Cr(VI) adsorption capacity for both was 13.26 mg/g at 298-328 K. The reaction was endothermic with decreased randomness at the solid-liquid interface due to positive entropy and enthalpy values. All kinetic and thermodynamic parameters showed the feasibility of the adsorption process, and characterization after adsorption indicated ZR1 and ZR2 novel activated carbons as efficient and cheapest biosorbents for removing As(V) and Cr(VI).

Mesoporous Cu-Doped Manganese Oxide Nano Straws for Photocatalytic Degradation of Hazardous Alizarin Red Dye.

The present work reports the photocatalytic degradation of alizarin red (AR) using Cu-doped manganese oxide (MH16-MH20) nanomaterials as catalysts under UV light irradiation. Cu-doped manganese oxides were synthesized by a very facile hydrothermal approach and characterized by energy dispersive X-ray spectroscopy, powder X-ray diffraction, scanning electron microscopy, Brunauer-Emmett-Teller analysis, UV-vis spectroscopy, and photoluminescence techniques. The structural, morphological, and optical characterization revealed that the synthesized compounds are nanoparticles (38.20-54.10 nm), grown in high mesoporous density (constant C > 100), possessing a tetragonal phase, and exhibiting 2.98-3.02 eV band gap energies. Synthesized materials were utilized for photocatalytic AR dye degradation under UV light which was monitored by UV-visible spectroscopy and % AR degradation was calculated at various time intervals from absorption spectra. More than 60% AR degradation at various time intervals was obtained for MH16-MH20 indicating their good catalytic efficiencies for AR removal. However, MH20 was found to be the most efficient catalyst showing more than 84% degradation, hence MH20 was used to investigate the effect of various catalytic doses, AR concentrations, and pH of the medium on degradation. More than 50% AR degradation was obtained for all studied parameters with MH20 whereas the pseudo-first-order kinetic model was found to be the best-fitted kinetic model for AR degradation with k = 0.0015 and R2 = 0.99 indicating a significant correlation between experimental data.

Catalytic Oxidation of Toluene into Benzaldehyde and Benzyl Alcohol Using Molybdenum-Incorporated Manganese Oxide Nanomaterials.

Oxidation of toluene (an organic pollutant), into useful chemical products, is of great interest nowadays. However, efficient conversion of toluene under mild and sustainable conditions is a thought-provoking task. Here, we report MnMoO4 nanomaterials (CH1-CH2), synthesized through a very facile solvothermal approach. Catalytic efficiencies of MnMoO4 nanomaterials were evaluated by direct oxidation of toluene via C-H activation. Toluene was converted into benzaldehyde and benzyl alcohol in the presence of H2O2 as an oxidant at 80 °C. The reaction parameters, that is, catalyst dose, time, and toluene concentration, were varied to obtain the optimal conditions for the oxidation process. The 40.62% maximum toluene conversion rate was obtained after 18 h of oxidation activity with 0.06 g of catalyst CH1. A maximum of 78% benzaldehyde selectivity was obtained with 0.06 g of catalyst CH1 after 18 h of toluene oxidation activity. Also, 62.33% benzyl alcohol selectivity was achieved using 0.1 g of catalyst CH1 after 1 h of activity. Several catalytic cycles were run with CH1 to evaluate catalyst reusability. Potential % toluene conversion was obtained for up to six cycles and their turnover frequencies were found to be 1.94-1.01 s-1. FTIR spectra of catalyst CH1 before and after recovery indicate no significant change. The good conversion rate of toluene and efficient selectivity toward benzaldehyde and benzyl alcohol indicates the robustness and high potential of these catalysts to oxidize toluene under a milder, greener, and hazardous chlorine-free environment.

Design, synthesis, crystal structure, in vitro cytotoxicity evaluation, density functional theory calculations and docking studies of 2-(benzamido) benzohydrazide derivatives as potent AChE and BChE inhibitors.

A series of hydrazone derivatives of 2-(benzamido) benzohydrazide was designed, synthesized, and characterized utilizing FTIR, NMR and UV spectroscopic techniques along with mass spectrometry. Compound 10 was also characterized through X-ray crystallography. These synthesized compounds were assessed for their potential as anti-Alzheimer's agents by checking their AChE and BChE inhibition properties by in vitro analysis. The synthesized derivatives were also evaluated for their antioxidant potential along with cytotoxicity studies. The results clearly indicated that dual inhibition of both the enzymes acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) was achieved by most of the compounds (03-13), showing varying IC50values. Remarkably, compound 06 (IC50 = 0.09 ± 0.05 for AChE and 0.14 ± 0.05 for BChE) and compound 13 (IC50 = 0.11 ± 0.03 for AChE and 0.10 ± 0.06 for BChE) from the series showed IC50 values comparable to the standard donepezil (IC50 = 0.10 ± 0.02 for AChE and 0.14 ± 0.03 for BChE). Moreover, the derivative 11 also exhibited selective inhibition against BChE with IC50 = 0.12 ± 0.09. Meanwhile, compounds 04 and 10 exhibited good anti-oxidant activities, showing % scavenging of 95.06% and 82.55%, respectively. Cytotoxicity studies showed that the synthesized compounds showed cell viability greater than 80%; thus, these compounds can be safely used as drugs. DFT and molecular docking studies also supported the experimental findings.

Terpyridine-metal complexes: effects of different substituents on their physico-chemical properties and density functional theory studies.

A series of different substituted terpyridine (tpy)-based ligands have been synthesized by Kröhnke method. Their binding behaviour was evaluated by complexing them with Co(II), Fe(II) and Zn(II) ions, which resulted in interesting coordination compounds with formulae, [Zn(tpy)2]PF6, [Co(tpy)2](PF6)2, [Fe(tpy)2](PF6)2 and interesting spectroscopic properties. Their absorption and emission behaviours in dilute solutions were investigated in order to explain structure-property associations and demonstrate the impact of different aryl substituents on the terpyridine scaffold as well as the role of the metal on the complexes. Photo-luminescence analysis of the complexes in acetonitrile solution revealed a transition from hypsochromic to bathochromic shift. All the compounds displayed remarkable photo-luminescent properties and various maximum emission peaks owing to the different nature of the functional groups. Furthermore, the anti-microbial potential of ligands and complexes was evaluated with docking analyses carried out to investigate the binding affinity of terpyridine-based ligands along with corresponding proteins (shikimate dehydrogenase and penicillin-binding protein) binding sites. To obtain further insight into molecular orbital distributions and spectroscopic properties, density functional theory calculations were performed for representative complexes. The photophysical activity and interactions between chromophore structure and properties were both investigated experimentally as well as theoretically.