Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 5 de 5
Filtrar
Más filtros

Banco de datos
Tipo del documento
País de afiliación
Intervalo de año de publicación
1.
Bioprocess Biosyst Eng ; 45(12): 1993-2006, 2022 Dec.
Artículo en Inglés | MEDLINE | ID: mdl-36326885

RESUMEN

Rapid increase in population and development in industry causes many problems such as microbial contaminations and chronic diseases such as diabetes. Materials synthesized at nanoscale are novel antidiabetic and antimicrobial agents. ZnO nanoparticles with macropores characteristics are synthesized by green methods. Turmeric, clove buds and green tea extracts are used as additives. X-ray diffraction results confirmed the hexagonal wurtzite structure of ZnO nanoparticles and crystallinity was quit high in case of green tea extract. Sample synthesized with clove shows relatively higher crystallite size (10.64) which is pertaining to variation in Zn2+ and OH- ions. The nanoparticles are more or less spherical in nature, macropores and clustered together revealed by SEM images. Macroporosity of the sample was further confirmed by nitrogen adsorption-desorption isotherm. The deep absorption band at 605 cm-1 in FTIR spectra attributed the wurtzite-type ZnO. The major dominating sharp peak was detected at 437 cm-1 in Raman spectra which is a feature of the wurtzite hexagonal phase ZnO. UV-Vis spectra showed red shift from wavelength 362 to 375 nm with different plant extracts. Impedance analysis showed a high dielectric constant and low tangent loss in case of green tea extract. ZnO synthesized using green tea exhibited ~ 95% α-glucosidase inhibition activity and 91% α-amylase inhibition activity. Antibacterial results revealed that synthesized ZnO nanoparticles showed activity against Bacillus subtilis and E. coli with inhibition zone 35 mm and 29 mm, respectively.


Asunto(s)
Nanopartículas del Metal , Óxido de Zinc , Óxido de Zinc/farmacología , Óxido de Zinc/química , Hipoglucemiantes , Escherichia coli , Extractos Vegetales/farmacología , Extractos Vegetales/química , Antibacterianos/farmacología , Antibacterianos/química , Antioxidantes/química , , Tecnología Química Verde/métodos , Nanopartículas del Metal/química , Pruebas de Sensibilidad Microbiana , Espectroscopía Infrarroja por Transformada de Fourier
2.
J Nanosci Nanotechnol ; 18(2): 1296-1302, 2018 Feb 01.
Artículo en Inglés | MEDLINE | ID: mdl-29448577

RESUMEN

The effect of potential on the crystal structure and composition of Co-Ni alloy nanowires is studied by XRD, FE-SEM and EDX. The deposited alloy nanowires are metastable fcc phase Co84.45Ni15.55 at -3.0 V and stable hcp phase Co80.75Ni19.25 at -1.6 V. The formation of the metastable fcc alloy nanowires can be attributed to smaller critical clusters formed at the high potential, as the smaller critical clusters favor fcc structure because of the significant surface energy effect. The content of Co inside nanowires increases with increasing potential. This can be understood by the polarization curves of depositing Co and Ni nanowires, which show that the current density ratio of Ni to Co at -1.6 V (0.88) is higher than that at -3.0 V (0.73).

3.
Materials (Basel) ; 16(14)2023 Jul 15.
Artículo en Inglés | MEDLINE | ID: mdl-37512285

RESUMEN

In this study, ZnO nanoparticles (NPs) were synthesized in the presence of almond oil at various molar ratios of zinc acetate and sodium hydroxide, including 0.5:1, 0.75:1, 1:1, 1.25:1, and 1.5:1, to obtain pH values of 11, 10, 9, 8, and 7, respectively. The XRD results revealed that ZnO NPs exhibit a hexagonal structure, with high crystallinity. SEM results showed that dense and large sized ZnO NPs were formed at pH 11, and relatively small (~30-40 nm) NPs were obtained at pH 9. The size distribution can be explained in terms of the presence of OH- ions at different pH levels. However, the larger size of the NPs at pH 7 compared to those at pH 8-11 were due to the coalescence of NPs suitable for antioxidant/antibacterial activities. ZnO NPs demonstrated a high degradation efficiency (~93%) in 90 min, with a high rate constant for Methyl Orange (MO), which is better than the previously reported rate. The larger sized almond oil capped ZnO NPs also showed excellent radical scavenging activity (94%) and are proven to be good carriers to resist Escherichia coli (E. coli) bacteria.

4.
Materials (Basel) ; 15(13)2022 Jun 21.
Artículo en Inglés | MEDLINE | ID: mdl-35806499

RESUMEN

Biogenic routes for the synthesis of nanoparticles are environmentally friendly, nontoxic, biocompatible, and cost-effective compared to traditional synthesis methods. In this study, cobalt ferrite was synthesized using Zingiber officinale and Elettaria cardamom Seed extracts. Effect of copper contents (x = 0.0, 0.3, 0.6 and 0.9) on the plant extracted Cux(Co1-xFe2O4) was investigated by XRD, SEM, EDX, UV-Vis., PL, FE-SEM, FTIR and photocatalytic activity. XRD results revealed that nanoparticles exhibit a cubical spinel structure with an average diameter of 7-45 nm, calculated by the Debye Scherer formula. The value of the lattice parameter decreased from 8.36 Å to 8.08 Å with substitution of copper, which can be attributed to mismatch of ionic radii of Cu2+ (0.73 Å) and Co2+ (0.74 Å) ions. SEM analysis showed that nanoparticles exhibit a spherical shape (~13 nm diameter) for undoped samples and low Cu concentration, while they changed to a hexagonal structure at higher Cu concentration (x = 0.9) with a diameter ~46 nm and a decreased degree of agglomeration. FE-SEM further confirmed the nanoparticles' size and shape. EDX analysis confirmed the presence of cobalt, iron, and oxygen without contamination. The optical absorption spectra of UV-vis and PL showed red-shift, which can be accredited to larger crystalline sizes of nanoparticles. FTIR spectra showed two main bands at 410 and 605 cm-1, indicating the presence of intrinsic vibrations of the octahedral and tetrahedral complexes, respectively. The photocatalytic activity of Co0.4Cu0.6 Fe2O4 nanoparticles was investigated using methylene blue (MB) and methyl orange (MO) dyes under visible light irradiation. The degradation rate (93.39% and 83.15%), regression correlation coefficient (0.9868 and 0.9737) and rate constant (0.04286 and 0.03203 rate·min-1) were calculated for MB and MO, respectively. Mechanisms for the formation and photocatalytic activity of Cu-substituted plant-extracted cobalt ferrite were discussed. The Co0.4Cu0.6 Fe2O4 nanoferrite was found to be an efficient photocatalyst, and can be exploited for wastewater treatment applications for MB/MO elimination.

5.
Materials (Basel) ; 12(16)2019 Aug 19.
Artículo en Inglés | MEDLINE | ID: mdl-31430867

RESUMEN

The effect of laser irradiation with different numbers of laser shots on the microstructure, the surface, and the hardness of gun metal alloy was studied by a KrF pulsed excimer laser system, X-ray diffraction, Raman spectroscopy, scanning electron microscopy, and Vickers hardness test. The influence of 100-500 laser shots was irradiated on the surface hardness profile and on the microstructure of gunmetal alloy. XRD results showed the maximum 2θ shift, the maximum full width of half maximum FWHM, the maximum dislocation density, and the minimum crystallite size for the sample irradiated with 300 laser shots. The hardness was measured in three different regions at the laser irradiated spot, and it was found that maximum hardness was present at the heat affected zone for all samples. The hardness value of the un-irradiated sample of gun metal was 180, and the value increased up to 237 by raising the number of laser shots up to 300. The peak value of surface hardness of the laser treated sample was 32% higher than the un-irradiated sample. The Raman shift of the un-exposed sample was 605 cm-1 and shifted to a higher value of wave number at 635 cm-1 at 300 laser shots. The hardness value was decreased by further increasing the number of laser shots up to 500. The samples irradiated with 400 and 500 laser shots exhibited smaller hardness and dislocation defect density, which was assigned to possible annealing caused by irradiation.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA