Multifunctional Nanorobot System for Active Therapeutic Delivery and Synergistic Chemo-photothermal Therapy.

Nanorobots are safe and exhibit powerful functionalities, including delivery, therapy, and diagnosis. Therefore, they are in high demand for the development of new cancer therapies. Although many studies have contributed to the progressive development of the nanorobot system for anticancer drug delivery, these systems still face some critical limitations, such as potentially toxic materials in the nanorobots, unreasonable sizes for passive targeting, and the lack of several essential functions of the nanorobot for anticancer drug delivery including sensing, active targeting, controlling drug release, and sufficient drug loading capacity. Here, we developed a multifunctional nanorobot system capable of precise magnetic control, sufficient drug loading for chemotherapy, light-triggered controlled drug release, light absorption for photothermal therapy, enhanced magnetic resonance imaging, and tumor sensing. The developed nanorobot system exhibits an in vitro synergetic antitumor effect of photothermal therapy and chemotherapy and outstanding tumor-targeting efficiency in both in vitro and in vivo environments. The results of this study encourage further explorations of an efficient active drug delivery system for cancer treatment and the development of nanorobot systems for other biomedical applications.

Zinc plays a critical role in the cardioprotective effect of postconditioning by enhancing the activation of the RISK pathway in rat hearts.

This study investigated if zinc plays a role in postconditioning-induced cardioprotection in rat hearts. Isolated rat hearts were subjected to 30 min regional ischemia followed by 2h of reperfusion. Postconditioning was elicited by 6 cycles of 10s reperfusion and 10s ischemia. Cytosolic zinc concentrations were measured with inductively coupled plasma optical emission spectroscopy (ICPOES). Infarct size was assessed by triphenyltetrazolium chloride staining. Cytosolic zinc concentrations were decreased dramatically upon reperfusion in the control hearts. In contrast, postconditioning increased cytosolic zinc levels at reperfusion. The anti-infarct effect of postconditioning was inhibited by the selective zinc chelator N,N,N',N'-tetrakis-(2-pyridylmethyl) ethylenediamine (TPEN). Postconditioning significantly increased phosphorylation levels of the reperfusion injury salvage kinases (RISK) including Akt (Ser(473)), extracellular signal-regulated kinase1/2 (ERK1/2) (Thr(202)/Tyr(204)), and glycogen synthase kinase-3ß (GSK-3ß) (Ser(9)) at reperfusion, which were nullified by TPEN. Postconditioning decreased the activity of protein phosphatase 2A (PP2A) in a zinc-dependent manner. Knockdown of the zinc transporter Zip2 inhibited the protective effect of postconditioning on hypoxia/reoxygenation injury in H9c2 cells. These results suggest that zinc plays an important role in the cardioprotective effect of postconditioning presumably by enhancing the activation of the RISK pathway. Zip2 and inactivation of PP2A by zinc may, at least in part, account for the activation of the RISK pathway.

Wearable Localized Surface Plasmon Resonance-Based Biosensor with Highly Sensitive and Direct Detection of Cortisol in Human Sweat.

Wearable biosensors have the potential for developing individualized health evaluation and detection systems owing to their ability to provide continuous real-time physiological data. Among various wearable biosensors, localized surface plasmon resonance (LSPR)-based wearable sensors can be versatile in various practical applications owing to their sensitive interactions with specific analytes. Understanding and analyzing endocrine responses to stress is particularly crucial for evaluating human performance, diagnosing stress-related diseases, and monitoring mental health, as stress takes a serious toll on physiological health and psychological well-being. Cortisol is an essential biomarker of stress because of the close relationship between cortisol concentration in the human body and stress level. In this study, a flexible LSPR biosensor was manufactured to detect cortisol levels in the human body by depositing gold nanoparticle (AuNP) layers on a 3-aminopropyltriethoxysilane (APTES)-functionalized poly (dimethylsiloxane) (PDMS) substrate. Subsequently, an aptamer was immobilized on the surface of the LSPR substrate, enabling highly sensitive and selective cortisol capture owing to its specific cortisol recognition. The biosensor exhibited excellent detection ability in cortisol solutions of various concentrations ranging from 0.1 to 1000 nM with a detection limit of 0.1 nM. The flexible LSPR biosensor also demonstrated good stability under various mechanical deformations. Furthermore, the cortisol levels of the flexible LSPR biosensor were also measured in the human epidermis before and after exercise as well as in the morning and afternoon. Our biosensors, which combine easily manufactured flexible sensors with sensitive cortisol-detecting molecules to measure human stress levels, could be versatile candidates for human-friendly products.

Magnetically Actuated Microscaffold with Controllable Magnetization and Morphology for Regeneration of Osteochondral Tissue.

Magnetic microscaffolds capable of targeted cell delivery have been developed for tissue regeneration. However, the microscaffolds developed so far with similar morphologies have limitations for applications to osteochondral disease, which requires simultaneous treatment of the cartilage and subchondral bone. This study proposes magnetically actuated microscaffolds tailored to the cartilage and subchondral bone for osteochondral tissue regeneration, named magnetically actuated microscaffolds for cartilage regeneration (MAM-CR) and for subchondral bone regeneration (MAM-SBR). The morphologies of the microscaffolds were controlled using a double emulsion and microfluidic flow. In addition, due to their different sizes, MAM-CR and MAM-SBR have different magnetizations because of the different amounts of magnetic nanoparticles attached to their surfaces. In terms of biocompatibility, both microscaffolds were shown to grow cells without toxicity as potential cell carriers. In magnetic actuation tests of the microscaffolds, the relatively larger MAM-SBR moved faster than the MAM-CR under the same magnetic field strength. In a feasibility test, the magnetic targeting of the microscaffolds in 3D knee cartilage phantoms showed that the MAM-SBR and MAM-CR were sequentially moved to the target sites. Thus, the proposed magnetically actuated microscaffolds provide noninvasive treatment for osteochondral tissue disease.

From Low to High Saturation Magnetization in Magnetite Nanoparticles: The Crucial Role of the Molar Ratios Between the Chemicals.

In this study, a comprehensive characterization of iron oxide nanoparticles synthesized by using a simple one-pot thermal decomposition route is presented. In order to obtain monodisperse magnetite nanoparticles with high saturation magnetization, close to the bulk material, the molar ratios between the starting materials (solvents, reducing agents, and surfactants) were varied. Two out of nine conditions investigated in this study resulted in monodisperse iron oxide nanoparticles with high saturation magnetization (90 and 93% of bulk magnetite). The X-ray diffraction analyses along with the inspection of the lattice structure through transmission electron micrographs revealed that the main cause of the reduced magnetization in the other seven samples is likely due to the presence of distortion and microstrain in the particles. Although the thermogravimetric analysis, Raman and Fourier transform infrared spectroscopies confirmed the presence of covalently bonded oleic acid on the surface of all the samples, the particles with higher polydispersity and the lowest surface coating molecules showed the lowest saturation magnetization. Based on the observed results, it could be speculated that the changes in the kinetics of the reactions, induced by varying the molar ratio of the starting chemicals, can lead to the production of the particles with higher polydispersity and/or lattice deformation in their crystal structures. Finally, it was concluded that the experimental conditions for obtaining high-quality iron oxide nanoparticles, particularly the molar ratios and the heating profile, should not be chosen independently; for any specific molar ratio, there may exist a specific heating profile or vice versa. Because this synthetic consideration has rarely been reported in the literature, our results can give insights into the design of iron oxide nanoparticles with high saturation magnetization for different applications.

Microrobot with Gyroid Surface and Gold Nanostar for High Drug Loading and Near-Infrared-Triggered Chemo-Photothermal Therapy.

The use of untethered microrobots for precise synergistic anticancer drug delivery and controlled release has attracted attention over the past decade. A high surface area of the microrobot is desirable to achieve greater therapeutic effect by increasing the drug load. Therefore, various nano- or microporous microrobot structures have been developed to load more drugs. However, as most porous structures are not interconnected deep inside, the drug-loading efficiency may be reduced. Here, we propose a magnetically guided helical microrobot with a Gyroid surface for high drug-loading efficiency and precise drug delivery. All spaces inside the proposed microrobot are interconnected, thereby enabling drug loading deep inside the structure. Moreover, we introduce gold nanostars on the microrobot structure for near-infrared-induced photothermal therapy and triggering drug release. The results of this study encourage further exploration of a high loading efficiency in cell-based therapeutics, such as stem cells or immune cells, for microrobot-based drug-delivery systems.

Magnetically controlled reversible shape-morphing microrobots with real-time X-ray imaging for stomach cancer applications.

Stomach cancer is a global health concern as millions of cases are reported each year. In the present study, we developed a pH-responsive microrobot with good biocompatibility, magnetic-field controlled movements, and the ability to be visualized via X-ray imaging. The microrobot consisted of composite resin and a pH-responsive layer. This microrobot was found to fold itself in high pH environments and unfold itself in low pH environments. In addition, the neodymium (NdFeB) magnetic nanoparticles present inside the composite resin provided the microrobot with an ability to be controlled by a magnetic field through an electromagnetic actuation system, and the monomeric triiodobenzoate-based particles were found to act as contrast agents for real-time X-ray imaging. The doxorubicin coating on the microrobot's surface resulted in a high cancer-cell killing effect. Finally, we demonstrated the proposed microrobot under an ex vivo environment using a pig's stomach. Thus, this approach can be a potential alternative to targeted drug carriers, especially for stomach cancer applications.

Magnetization-Switchable Implant System to Target Delivery of Stem Cell-Loaded Bioactive Polymeric Microcarriers.

Various magnetic microcarrier systems capable of transporting cells to target lesions are developed for therapeutic agent-based tissue regeneration. However, the need for bioactive molecules and cells, the potential toxicity of the microcarrier, and the large volume and limited workspace of the magnetic targeting device remain challenging issues associated with microcarrier systems. Here, a multifunctional magnetic implant system is presented for targeted delivery, secure fixation, and induced differentiation of stem cells. This magnetic implant system consists of a biomaterial-based microcarrier containing bioactive molecules, a portable magnet array device, and a biocompatible paramagnetic implant. Among biomedical applications, the magnetic implant system is developed for knee cartilage repair. The various functions of these components are verified through in vitro, phantom, and ex vivo tests. As a result, a single microcarrier can load ≈1.52 ng of transforming growth factor ß (TGF-ß1) and 3.3 × 103 of stem cells and stimulate chondrogenic differentiation without extra bioactive molecule administration. Additionally, the implant system demonstrates high targeting efficiency (over 90%) of the microcarriers in a knee phantom and ex vivo pig knee joint. The results show that this implant system, which overcomes the limitations of the existing magnetic targeting system, represents an important advancement in the field.

A Magnetically Guided Self-Rolled Microrobot for Targeted Drug Delivery, Real-Time X-Ray Imaging, and Microrobot Retrieval.

Targeted drug delivery using a microrobot is a promising technique capable of overcoming the limitations of conventional chemotherapy that relies on body circulation. However, most studies of microrobots used for drug delivery have only demonstrated simple mobility rather than precise targeting methods and prove the possibility of biodegradation of implanted microrobots after drug delivery. In this study, magnetically guided self-rolled microrobot that enables autonomous navigation-based targeted drug delivery, real-time X-ray imaging, and microrobot retrieval is proposed. The microrobot, composed of a self-rolled body that is printed using focused light and a surface with magnetic nanoparticles attached, demonstrates the loading of doxorubicin and an X-ray contrast agent for cancer therapy and X-ray imaging. The microrobot is precisely mobilized to the lesion site through automated targeting using magnetic field control of an electromagnetic actuation system under real-time X-ray imaging. The photothermal effect using near-infrared light reveals rapid drug release of the microrobot located at the lesion site. After drug delivery, the microrobot is recovered without potential toxicity by implantation or degradation using a magnetic-field-switchable coiled catheter. This microrobotic approach using automated control method of the therapeutic agents-loaded microrobot has potential use in precise localized drug delivery systems.

Multifunctional Biodegradable Microrobot with Programmable Morphology for Biomedical Applications.

We described a magnetic chitosan microscaffold tailored for applications requiring high biocompatibility, biodegradability, and monitoring by real-time imaging. Such magnetic microscaffolds exhibit adjustable pores and sizes depending on the target application and provide various functions such as magnetic actuation and enhanced cell adhesion using biomaterial-based magnetic particles. Subsequently, we fabricated the magnetic chitosan microscaffolds with optimized shape and pore properties to specific target diseases. As a versatile tool, the capability of the developed microscaffold was demonstrated through in vitro laboratory tasks and in vivo therapeutic applications for liver cancer therapy and knee cartilage regeneration. We anticipate that the optimal design and fabrication of the presented microscaffold will advance the technology of biopolymer-based microscaffolds and micro/nanorobots.

Sonazoid-Conjugated Natural Killer Cells for Tumor Therapy and Real-Time Visualization by Ultrasound Imaging.

Various cell therapy strategies, including chimeric antigen receptor-expressing T or natural killer (NK) cells and cell-mediated drug delivery, have been developed for tumor eradication. However, the efficiency of these strategies against solid tumors remains unclear. We hypothesized that real-time control and visualization of therapeutic cells, such as NK cells, would improve their therapeutic efficacy against solid tumors. In this study, we engineered Sonazoid microbubble-conjugated NK (NK_Sona) cells and demonstrated that they were detectable by ultrasound imaging in real-time and maintained their functions. The Sonazoid microbubbles on the cell membrane did not affect the cytotoxicity and viability of the NK cells in vitro. Additionally, the NK_Sona cells could be visualized by ultrasound imaging and inhibited tumor growth in vivo. Taken together, our findings demonstrate the feasibility of this new approach in the use of therapeutic cells, such as NK cells, against solid tumors.

Guide-Wired Helical Microrobot for Percutaneous Revascularization in Chronic Total Occlusion in-Vivo Validation.

OBJECTIVE: For the revascularization in small vessels such as coronary arteries, we present a guide-wired helical microrobot mimicking the corkscrew motion for mechanical atherectomy that enables autonomous therapeutics and minimizing the radiation exposure to clinicians. METHODS: The microrobot is fabricated with a spherical joint and a guidewire. A previously developed external electromagnetic manipulation system capable of high power and frequency is incorporated and an autonomous guidance motion control including driving and steering is implemented in the prototype. We tested the validity of our approach in animal experiments under clinical settings. For the in vivo test, artificial thrombus was fabricated and placed in a small vessel and atherectomy procedures were conducted. RESULTS: The devised approach enables us to navigate the helical robot to the target area and successfully unclog the thrombosis in rat models in vivo. CONCLUSION: This technology overcomes several limitations associated with a small vessel environment and promises to advance medical microrobotics for real clinical applications while achieving intact operation and minimizing radiation exposures to clinicians. SIGNIFICANCE: Advanced microrobot based on multi-discipline technology could be validated in vivo for the first time and that may foster the microrobot application at clinical sites.

Human adipose-derived mesenchymal stem cell-based medical microrobot system for knee cartilage regeneration in vivo.

Targeted cell delivery by a magnetically actuated microrobot with a porous structure is a promising technique to enhance the low targeting efficiency of mesenchymal stem cell (MSC) in tissue regeneration. However, the relevant research performed to date is only in its proof-of-concept stage. To use the microrobot in a clinical stage, biocompatibility and biodegradation materials should be considered in the microrobot, and its efficacy needs to be verified using an in vivo model. In this study, we propose a human adipose-derived MSC-based medical microrobot system for knee cartilage regeneration and present an in vivo trial to verify the efficacy of the microrobot using the cartilage defect model. The microrobot system consists of a microrobot body capable of supporting MSCs, an electromagnetic actuation system for three-dimensional targeting of the microrobot, and a magnet for fixation of the microrobot to the damaged cartilage. Each component was designed and fabricated considering the accessibility of the patient and medical staff, as well as clinical safety. The efficacy of the microrobot system was then assessed in the cartilage defect model of rabbit knee with the aim to obtain clinical trial approval.

Fabrication and biological properties of calcium phosphate/chitosan composite coating on titanium in modified SBF.

In order to increase the biocompatibility and bioactivity of chitosan, hydroxyapatite was in situ combined into the spin-coated chitosan layer on the titanium substrate by incubating in modified simulated body fluid (m-SBF). The calcium phosphate/chitosan (CaP/CS) composite prepared in m-SBF showed a homogeneous distribution of spherical nano-clusters. The hydrophilicity of the coatings was increased by performing NaOH post-treatment of CaP/CS composites, which also affected apatite formation. Biocompatibility of the coatings was assessed by investigating the cellular response of human osteoblast-like MG-63 cells with 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. Cell adhesion and osteogenic properties of the mesoporous CaP/CS composite were evaluated by SEM and ALPase assay, respectively. This in vitro study showed improved cell adhesion and differentiation on nanostructured CaP/CS composites. These results indicate that this CaP/CS composite could be a promising candidate for bone tissue engineering.