Engineering Stem Cell Fate Controlling Biomaterials to Develop Muscle Connective Tissue Layered Myofibers.

Skeletal muscle connective tissue (MCT) surrounds myofiber bundles to provide structural support, produce force transduction from tendons, and regulate satellite cell differentiation during muscle regeneration. Engineered muscle tissue composed of myofibers layered within MCT has not yet been developed. Herein, a bioengineering strategy to create MCT-layered myofibers through the development of stem cell fate-controlling biomaterials that achieve both myogenesis and fibroblast differentiation in a locally controlled manner at the single construct is introduced. The reciprocal role of transforming growth factor-beta 1 (TGF-ß1) and its inhibitor as well as 3D matrix stiffness to achieve co-differentiation of MCT fibroblasts and myofibers from a human-induced pluripotent stem cell (hiPSC)-derived paraxial mesoderm is studied. To avoid myogenic inhibition, TGF-ß1 is conjugated on the gelatin-based hydrogel to control the fibroblasts' populations locally; the TGF-ß1 degrades after 2 weeks, resulting in increased MCT-specific extracellular matrix (ECM) production. The locations of myofibers and fibroblasts are precisely controlled by using photolithography and co-axial wet spinning techniques, which results in the formation of MCT-layered functional myofibers in 3D constructs. This advanced engineering strategy is envisioned as a possible method for obtaining biomimetic human muscle grafts for various biomedical applications.

Chirality extension of an oxazine building block en route to total syntheses of (+)-hyacinthacine A2 and sphingofungin B.

Concise and stereocontrolled syntheses of (+)-hyacinthacine A2 and sphingofungin B were achieved via a diastereomerically enriched oxazine intermediate. The key strategies include palladium(0)-catalyzed intramolecular oxazine formation and diastereoselective nucleophilic addition to an aldehyde. (+)-Hyacinthacine A2 was synthesized in 13 steps and 10.2% overall yield and the synthesis of sphingofungin B proceeded in a linear sequence over 15 steps and 6.9% overall yield from (R)-methyl 2-benzamido-3-((tert-butyldimethylsilyl)oxy)propanoate.

Catalytic upgrading of xylan over mesoporous Y catalyst.

In-situ catalytic cracking of xylan, a model compound of hemicellulose, was carried out using pyrolysis-gas chromatography/mass spectrometry over mesoporous Y for the first time. Experiments were conducted at three different temperatures, 400 degrees C, 450 degrees C, and 500 degrees C, to investigate the effect of reaction temperature. Three different biomass-to-catalyst ratios, 1:1, 1:2, and 1:3, were tested at 500 degrees C to examine the effect of catalyst dose. In addition, the catalytic activity of mesoporous Y was compared with that of Al-MCM-41. The catalysts used were characterized by N2 adsorption-desorption, temperature programmed desorption of NH3, and X-ray diffraction. The main pyrolysis products of xylan were acids, hydrocarbons, phenolics, oxygenates, aromatics, and polycyclic aromatic hydrocarbons. Mesoporous Y, which has acid sites with larger quantity and stronger acidity than those of Al-MCM-41, was shown to enhance the quality of bio-oil to a larger extent, producing a larger quantity of high-value-added products, such as aromatics and furans.

Conversion of kraft lignin over hierarchical MFI zeolite.

Catalytic pyrolysis of kraft lignin was carried out using pyrolysis gas chromatography/mass spectrometry. Hierarchical mesoporous MFI was used as the catalyst and another mesoporous material Al-SBA-15 was also used for comparison. The characteristics of mesoporous MFI were analyzed by X-ray diffraction patterns, N2 adsorption-desorption isotherms, and temperature programmed desorption of NH3. Two catalyst/lignin mass ratios were tested: 5/1 and 10/1. Aromatics and alkyl phenolics were the main products of the catalytic pyrolysis of lignin over mesoporous MFI. In particular, the yields of mono-aromatics such as benzene, toluene, ethylbenzene, and xylene were increased substantially by catalytic upgrading. Increase in the catalyst dose enhanced the production of aromatics further, which is attributed to decarboxylation, decarbonlyation, and aromatization reactions occurring over the acid sites of mesoporous MFI.

Catalytic conversion of cellulose over mesoporous Y zeolite.

Mesoporous Y zeolite (Meso-Y) was applied, for the first time, to the catalytic pyrolysis of cellulose which is a major constituent of lignocellulosic biomass, to produce high-quality bio-oil. A representative mesoporous catalyst Al-MCM-41 was also used to compare its catalytic activity with that of Meso-Y. Pyrolysis-gas chromatography/mass spectrometry was used for the experiments. Meso-Y, with higher acidity, led to larger yields of aromatics and furans with high value-added than Al-MCM-41, resulting in the production of bio-oil with higher quality. The effect of temperature on the catalytic pyrolysis was not significant within the range of 400-500 degrees C. When the Meso-Y to cellulose ratio was increased from 1/1 via 2/1 to 3/1, the deoxygenation efficiency increased, leading to increased yield of aromatics.

On-chip integrated mid-infrared GaAs/AlGaAs Mach-Zehnder interferometer.

We report the design, fabrication, and first functional verification of mid-infrared (MIR; 3-12 µm) Mach-Zehnder interferometers (MZIs). The developed MIR-MZIs are entirely chip-integrated solid-state devices based on GaAs/AlGaAs technology waveguide fabricated via conventional optical lithography and reactive ion etching (RIE). Thus, fabricated MIR-MZIs were combined with a broadly tunable quantum cascade laser (tQCL) providing a wavelength coverage of 5.78-6.35 µm. MIR-MZIs have been designed with a waveguide width of 5 µm to ensure single mode behavior, avoiding optically undefined interference patterns. Several structures with different opening angles of the Y-junction were fabricated and tested for maximizing IR radiation throughput. This study demonstrates the feasibility of the very first chip-integrated mid-infrared Mach-Zehnder structures via interference patterns produced by minute amounts of water deposited at different positions of the MIR-MZI structure.

Multivariate determination of 13CO2/12CO2 ratios in exhaled mouse breath with mid-infrared hollow waveguide gas sensors.

The (12)CO2/(13)CO2 isotope ratio is a well-known marker in breath for a variety of biochemical processes and enables monitoring, e.g., of the glucose metabolism during sepsis. Using animal models-here, at a mouse intensive care unit-the simultaneous determination of (12)CO2 and (13)CO2 within small volumes of mouse breath was enabled by coupling a novel low-volume hollow waveguide gas cell to a compact Fourier transform infrared spectrometer combined with multivariate data evaluation based on partial least squares regression along with optimized data preprocessing routines.

Catalytic pyrolysis of waste mandarin over nanoporous materials.

Catalytic pyrolysis of waste mandarin was performed using nanoporous catalysts. AI-MCM-41 and Meso-MFI, which had different acid characteristics, were used. In addition, the characteristics of Pt/Meso-MFI were compared with those of Meso-MFI. To analyze the characteristics of the catalyst samples, Brunauer-Emmett-Teller surface area, temperature programmed desorption of NH3, and N2 adsorption-desorption analyses were performed. In addition, pyrolysis gas chromatography/mass spectrometry was used to facilitate the direct analysis of the pyrolytic products. The products obtained from catalytic pyrolysis contained a greater amount of valuable components than did those obtained from non-catalytic pyrolysis, indicating that catalytic pyrolysis improved the quality of the bio-oil. Additionally, valuable products such as furan and aromatic compounds were produced in greater quantities when Meso-MFI was used. When Pt/Meso-MFI was used, the amounts of furan and aromatic compounds produced increased even further.

Bio-oil upgrading via catalytic pyrolysis of waste mandarin residue over SBA-15 catalysts.

Mesoporous SBA-15-based catalysts were applied, for the first time, to the pyrolysis of waste mandarin residue. Si-SBA-15 with few acid sites, Al-SBA-15 with a significant amount of acid sites owing to the alumination treatment, and Pt/Al-SBA-15, which was synthesized by incorporating 7.1-nm Pt nanoparticles on Al-SBA-15, were used. Pyrolysis experiments were conducted by pyrolysis gas chromatography/mass spectroscopy to determine the catalytic activities of the catalysts used. X-ray diffraction, nitrogen adsorption, NH3-temperature-programmed desorption and transmission electron microscopy were used to characterize the catalysts. Al-SBA-15 produced higher quality bio-oil than Si-SBA-15 due to its better deoxygenation and cracking performance stemming from the presence of acid sites. Pt/Al-SBA-15 showed the highest oxygenate conversion as well as the largest yield of high-value-added compounds, such as aromatics, low-molecular-mass hydrocarbons and furans.

Abdominal aortic calcification in patients newly diagnosed with essential thrombocythemia.

Background: Although atherosclerosis is likely to be involved in the development of arterial thrombotic events in patients with essential thrombocythemia (ET), abdominal aortic calcification (AAC) has rarely been investigated. We evaluated the prevalence and clinical relevance of AAC at the time of ET diagnosis. Methods: This retrospective study included patients newly diagnosed with ET who underwent abdominal computed tomography (CT) at the time of diagnosis between January 2002 and December 2021 at Chungnam National University Hospital, Daejeon, Korea. CT images were reviewed and an aortic calcification score was assigned. Results: Of the 94 patients (median age, 62 yr; range, 18‒90 yr), AAC was detected in 62 (66.0%). AAC was most commonly mild (33.0%), followed by moderate (22.7%) and severe (5.3%). Old age [odds ratio (OR), 34.37; 95% confidence interval (CI), 12.32‒95.91; P＜0.001] was an independent risk factor for AAC. The patients with AAC had a higher WBC count (11.8±4.7 vs. 9.7±2.9×109/L, P=0.017), higher neutrophil-to-lymphocyte ratio (4.3±2.7 vs. 3.1±1.5, P=0.039), and higher JAK2V617F positivity (81.5% vs. 58.8%, P=0.020) compared to those without AAC. AAC was an independent risk factor for arterial thrombotic vascular events that occurred before or at diagnosis of ET (OR, 4.12; 95% CI, 1.11‒15.85; P=0.034). Conclusion: AAC is common in patients with ET and is associated with arterial thrombotic events.

Ultra-sensitive mid-infrared evanescent field sensors combining thin-film strip waveguides with quantum cascade lasers.

We demonstrate ultra-sensitive chemical sensing in the mid-infrared spectral regime with a combination of quantum cascade lasers (QCLs) with GaAs/Al(0.2)Ga(0.8)As strip waveguides fabricated via metal-organic vapor-phase epitaxy (MOVPE) and reactive ion etching (RIE) using evanescent field absorption spectroscopy. These strip waveguides have been designed with a width of 200 µm, thereby facilitating 2-D confinement and mode-matched propagation of mid-infrared radiation emitted from a distributed feedback (DFB) QCL at a wavelength of 10.3 µm. Acetic anhydride was detected with a limit of detection (LOD) of 18 pL (19.4 ng) deposited at the waveguide surface by overlapping of the vibrational absorption of the methyl group with the emission frequency of the QCL. The obtained results indicate a remarkable enhancement in sensitivity by three orders of magnitude compared to previously reported multimode planar silver halide waveguides. Further reduction of the waveguide strip width to 50 µm resulted in an additional sensitivity enhancement yielding a calculated LOD of 0.05 pL for the exemplary analyte acetic anhydride, which is among the most sensitive evanescent field absorption measurements with a miniaturized mid-infrared sensor system reported to date.

Toward the quantification of the 13CO2/12CO2 ratio in exhaled mouse breath with mid-infrared hollow waveguide gas sensors.

Mouse sepsis models are used to gain insight into the complex processes involved with patients suffering from glucose metabolism disorders. Measuring the expiratory release of (13)CO(2) after administering stable labeled (13)C(6)-glucose enables assessment of the in vivo integrity and functionality of key metabolic processes. In the present study, we demonstrate that Fourier transform infrared spectroscopy operating in the mid-infrared spectral regime (2-20 µm) combined with hollow waveguide gas sensing modules simultaneously serving as a miniaturized gas cell and as a waveguide are capable of quantitatively monitoring (13)CO(2) enrichment levels in low volume mouse breath samples.

Observation of methanol behavior in fuel cells in situ by NMR spectroscopy.

The chemical conversion of methanol in direct methanol fuel cells was followed in situ by NMR spectroscopy. Comparing data of the methanol oxidation on Pt and PtRu anode catalysts allowed the role of Ru in both Faradaic and non-Faradaic reactions to be investigated. The spatial distributions of chemicals could also be determined. (Picture: T1-T4=inlet and outlet tubes.).

Increased interleukin-6 and TP53 levels in rotator cuff tendon repair patients with hypercholesterolemia.

BACKGROUND: A previous study reported that hyperlipidemia increases the incidence of tears in the rotator cuff tendon and affects healing after repair. The aim of our study was to compare the gene and protein expression of torn rotator cuff tendons in patients both with and without hypercholesterolemia. METHODS: Thirty patients who provided rotator cuff tendon samples were classified into either a non-hypercholesterolemia group (n=19, serum total cholesterol [TC] <200 mg/dL) and hypercholesterolemia group (n=11, serum TC ≥240 mg/dL) based on their concentrations of serum TC. The expression of various genes of interest, including COL1A1, IGF1, IL-6, MMP2, MMP3, MMP9, MMP13, TNMD, and TP53, was analyzed by real-time quantitative reverse transcription polymerase chain reaction (qRT-PCR). In addition, Western blot analysis was performed on the proteins encoded by interleukin (IL)-6 and TP53 that showed significantly different expression levels in real-time qRT-PCR. RESULTS: Except for IGF1, the gene expression levels of IL-6, MMP2, MMP9, and TP53 were significantly higher in the hypercholesterolemic group than in the non-hypercholesterolemia group. Western blot analysis confirmed significantly higher protein levels of IL-6 and TP53 in the hypercholesterolemic group (p<0.05). CONCLUSIONS: We observed an increase in inflammatory cytokine and matrix metalloproteinase (MMP) levels in hypercholesterolemic patients with rotator cuff tears. Increased levels of IL-6 and TP53 were observed at both the mRNA and protein levels. We suggest that the overexpression of IL-6 and TP53 may be a specific feature in rotator cuff disease patients with hypercholesterolemia.

Effects of a graphene oxide-alginate sheet scaffold on rotator cuff tendon healing in a rat model.

BACKGROUND: Natural polymer scaffolds used to promote rotator cuff healing have limitations in terms of their mechanical and biochemical properties. This animal study aimed to investigate the effects of combined graphene oxide (GO) and alginate scaffold and the toxicity of GO on rotator cuff healing in a rat model. METHODS: First, the mechanical properties of a GO/alginate scaffold and a pure alginate scaffold were compared. The in vitro cytotoxicity of and proliferation of human tenocytes with the GO/alginate scaffold were evaluated by CCK-8 assay. For the in vivo experiment, 20 male rats were randomly divided into two groups (n = 10 each), and supraspinatus repair was performed: group 1 underwent supraspinatus repair alone, and group 2 underwent supraspinatus repair with the GO/alginate scaffold. Biomechanical and histological analyses were performed to evaluate the quality of tendon-to-bone healing 8 weeks after rotator cuff repair. RESULTS: The GO/alginate scaffold exhibited an increased maximum load (p = .001) and tensile strength (p = .001). In the cytotoxicity test, the cell survival rate with the GO/alginate scaffold was 102.08%. The proliferation rate of human tenocytes was no significant difference between the GO/alginate and alginate groups for 1, 3, 5, and 7 days. Biomechanically, group 2 exhibited a significantly greater ultimate failure load (p < .001), ultimate stress (p < .001), and stiffness (p < .001) than group 1. The histological analysis revealed that the tendon-to-bone interface in group 2 showed more collagen fibers bridging, tendon-to-bone integration, longitudinally oriented collagen fibers, and fibrocartilage formation than in group 1. CONCLUSION: A small amount of GO added to alginate improved the mechanical properties of the scaffold without evidence of cytotoxicity. At 8 weeks after rotator cuff repair, the GO/alginate scaffold improved tendon-to-bone healing without causing any signs of toxicity in a rat model.

Effects of Thermal Conductive Materials on the Freeze-Thaw Resistance of Concrete.

To solve the problem of black ice, many studies are being carried out. The key in recent days is enhancing the thermal conductivity of concrete. In this study, to improve the thermal conductivity, silicon carbide was used to substitute 50% and 100% of the fine aggregate. In addition, steel fiber is not only for enhancing the mechanical properties but could enhance thermal conductive material. Hence, the arched-type steel fiber was used up to a 1% volume fraction in this study. Furthermore, graphite was used for 5% of the volume fraction for enhancing the thermal conductivity. However, thermal damage would occur due to the difference in thermal conductivity between materials. Therefore, the thermal durability must be verified first. The target application of the concrete in this study was its use as road paving material. To evaluate the thermal durability, freeze-thaw and rapid cyclic thermal attacks were performed. The thermal conductivity of the specimens was increased with the increase in thermal conductive materials. Graphite has already been reported to have a negative effect on mechanical properties, and the results showed that this was the case. However, the steel fiber compensated for the negative effect of graphite, and the silicon carbide provided a filler effect. Graphite also had a negative effect on the freeze-thaw and rapid cyclic thermal attack, but the steel fiber compensated for the reduction in thermal durability. The silicon carbide also helped to improve the thermal durability in the same way as steel fiber. Comprehensively, the steel fiber enhanced all of the properties of the tests. Using 100% silicon carbide was considered the acceptable range, but 50% of silicon carbide was the best. Graphite decreased all the properties except for the thermal conductivity. Therefore, the content of graphite or using other conductive materials used should be carefully considered in further studies.

The characterization of exosomes from fibrosarcoma cell and the useful usage of Dynamic Light Scattering (DLS) for their evaluation.

Exosomes are a type of extracellular vesicles containing mRNA, miRNA, and proteins of origin cells, which can control the characteristics of other cells or surroundings. Despite increasing evidence on oncogenic properties of tumor-derived exosomes, fibrosarcoma-derived exosomes remain largely unrevealed. While the proper extraction and characterization of exosomes is critical in exosomes research, there are various limitations in techniques to measure the size and homogeneity of exosomes. Here, we analyzed exosomes from a fibrosarcoma cell line WEHI-164 compared with a breast cancer cell line MDA-MD-231 as a control. Results from dot blot and western blot analysis demonstrated that GM1 ganglioside, and TSG101, HSC70 and GAPDH proteins were contained in exosomes from the WEHI-164 fibrosarcoma cell line. The existence of tetraspanins such as CD81, CD63 and CD9 was confirmed in the exosomes by ExoView analysis. The results obtained from TEM showed their sphere-like shapes of around 50 to 70 nm in radius. Through DLS, we found out that the mean radius of the exosomes derived from WEHI-164 and MDA-MB-231 cell lines was 94.4 nm and 107.8 nm, respectively, with high homogeneity. When comparing the radius measured by TEM with the radius measured by DLS, it was revealed that the difference between the two methods was about 40 nm. This study has significance in characterizing the molecular properties of exosomes from a fibrosarcoma, which has not been researched much before, and in providing clear evidence that DLS can be used as an efficient, convenient and noninvasive technique to simply check the homogeneity and size of exosomes.

Hair nicotine levels in non-smoking pregnant women whose spouses smoke outside of the home.

OBJECTIVE: To determine whether spouses who only smoke cigarettes outside the home can reduce the secondhand smoke (SHS) exposure of non-smoking pregnant women to the levels of those with non-smoking spouses. METHODS: In this cross-sectional survey performed between 1 October 2006 and 31 July 2007, 896 non-smoking pregnant women in their 35th gestational week were included. Hair nicotine levels and the smoking behaviour of their spouses at home were assessed. RESULTS: The geometric means of the hair nicotine levels of the participants with non-smoking spouses (group A), the participants with spouses who only smoked outside the home (group B), and the participants with spouses who smoked inside the home (group C) were 0.33 ng/mg (95% CI 0.30 to 0.35), 0.51 ng/mg (95% CI, 0.45 to 0.57) and 0.58 ng/mg (95% CI, 0.51 to 0.65), respectively. The mean log hair nicotine level of group A was significantly different from the other groups (p<0.001, Scheffe's post hoc test). Multiple linear regression analysis of the log-transformed hair nicotine levels of the participants after adjusting for confounding showed that the mean differences (SE of the mean difference) of groups B and C compared to the reference group A were 0.43 (0.07; p<0.001) and 0.44 (0.10; p<0.001), respectively. CONCLUSIONS: Spouses who only smoked outside the home did not reduce the level of SHS exposure of pregnant women to the level of pregnant women with non-smoking spouses. A strategy based on the separation of pregnant women and the smoking activity of their spouses might be inadequate to protect pregnant women from SHS at home.

Utilization of Waste Polysilicon Sludge in Concrete.

Increasing use of cement in the construction industry is causing an alarming increase in carbon dioxide (CO2) emissions, which is a serious environmental threat, it can be reduced by the addition of supplementary cementitious materials (SCMs). The commonly used SCMs like ground granulated blast furnace slag (GGBS), metakaolin (MK) and fly ash (FA) have been successfully used to replace the cement partially or completely. Polysilicon sludge obtained from the photovoltaic industry is also a type of waste material that can be used as SCM because it has high content of reactive SiO2. This study investigates the effects of replacing cement with polysilicon sludge in concrete. Different concrete specimens were made by replacing varying proportions of cement with polysilicon sludge and their properties, such as, fresh properties, compressive strength, heat release, chloride penetration, freeze/thaw resistance and microstructural investigations were determined. The results demonstrate that the polysilicon sludge can be used effectively to replace cement, and environmental threats associated with its disposal can be reduced.

An approach to the spectral simulation of infrared hollow waveguide gas sensors.

Optical simulations enable to model an entire chemical gas sensing platform based on hollow waveguides (HWGs) operating in the mid-infrared spectral regime using a three-dimensional representation of the sensor components and taking the spectral response to virtual analytes into account. Furthermore, a strategy for including the spectral response of dielectrically coated HWGs is demonstrated. Utilizing experimentally obtained spectroscopic data recorded at well-defined conditions, the complex refractive indices of selected target analytes (i.e., methane, butane, and isobutylene) have been derived based on a refined harmonic oscillator model. In turn, these parameters have enabled to directly assign the dielectric functions of these analytes to virtual objects representing the analyte within the modeled sensor setup. In a next step, spectroscopic sensor response functions have been simulated as absorbance spectra across selected wavelength regimes utilizing spectrally resolved ray-tracing techniques and have been compared to experimental data.